httpcaddyfile: Detect ambiguous site definitions (fix #4635)

Previously, our "duplicate key in server block" logic was flawed because
it did not account for the site's bind address. We defer this check to
when the listener addresses have been assigned, but before we commit
a server block to its listener.

Also refined how network address parsing and joining works, which was
necessary for a less convoluted fix.

caddyconfig/httpcaddyfile/addresses.go

@@ -183,6 +183,8 @@ func (st *ServerType) consolidateAddrMappings(addrToServerBlocks map[string][]se
 	return sbaddrs
 }
 
+// listenerAddrsForServerBlockKey essentially converts the Caddyfile
+// site addresses to Caddy listener addresses for each server block.
 func (st *ServerType) listenerAddrsForServerBlockKey(sblock serverBlock, key string,
 	options map[string]interface{}) ([]string, error) {
 	addr, err := ParseAddress(key)
@@ -232,12 +234,14 @@ func (st *ServerType) listenerAddrsForServerBlockKey(sblock serverBlock, key str
 	// use a map to prevent duplication
 	listeners := make(map[string]struct{})
 	for _, host := range lnHosts {
-		addr, err := caddy.ParseNetworkAddress(host)
-		if err == nil && addr.IsUnixNetwork() {
-			listeners[host] = struct{}{}
-		} else {
-			listeners[host+":"+lnPort] = struct{}{}
+		// host can have network + host (e.g. "tcp6/localhost") but
+		// will/should not have port information because this usually
+		// comes from the bind directive, so we append the port
+		addr, err := caddy.ParseNetworkAddress(host + ":" + lnPort)
+		if err != nil {
+			return nil, fmt.Errorf("parsing network address: %v", err)
 		}
+		listeners[addr.String()] = struct{}{}
 	}
 
 	// now turn map into list

caddyconfig/httpcaddyfile/httptype.go

@@ -58,22 +58,13 @@ func (st ServerType) Setup(inputServerBlocks []caddyfile.ServerBlock,
 	gc := counter{new(int)}
 	state := make(map[string]interface{})
 
-	// load all the server blocks and associate them with a "pile"
-	// of config values; also prohibit duplicate keys because they
-	// can make a config confusing if more than one server block is
-	// chosen to handle a request - we actually will make each
-	// server block's route terminal so that only one will run
-	sbKeys := make(map[string]struct{})
+	// load all the server blocks and associate them with a "pile" of config values
 	originalServerBlocks := make([]serverBlock, 0, len(inputServerBlocks))
-	for i, sblock := range inputServerBlocks {
+	for _, sblock := range inputServerBlocks {
 		for j, k := range sblock.Keys {
 			if j == 0 && strings.HasPrefix(k, "@") {
 				return nil, warnings, fmt.Errorf("cannot define a matcher outside of a site block: '%s'", k)
 			}
-			if _, ok := sbKeys[k]; ok {
-				return nil, warnings, fmt.Errorf("duplicate site address not allowed: '%s' in %v (site block %d, key %d)", k, sblock.Keys, i, j)
-			}
-			sbKeys[k] = struct{}{}
 		}
 		originalServerBlocks = append(originalServerBlocks, serverBlock{
 			block: sblock,
@@ -420,6 +411,23 @@ func (st *ServerType) serversFromPairings(
 	}
 
 	for i, p := range pairings {
+		// detect ambiguous site definitions: server blocks which
+		// have the same host bound to the same interface (listener
+		// address), otherwise their routes will improperly be added
+		// to the same server (see issue #4635)
+		for j, sblock1 := range p.serverBlocks {
+			for _, key := range sblock1.block.Keys {
+				for k, sblock2 := range p.serverBlocks {
+					if k == j {
+						continue
+					}
+					if sliceContains(sblock2.block.Keys, key) {
+						return nil, fmt.Errorf("ambiguous site definition: %s", key)
+					}
+				}
+			}
+		}
+
 		srv := &caddyhttp.Server{
 			Listen: p.addresses,
 		}

caddytest/integration/caddyfile_test.go

@@ -68,7 +68,7 @@ func TestDuplicateHosts(t *testing.T) {
     }
     `,
 		"caddyfile",
-		"duplicate site address not allowed")
+		"ambiguous site definition")
 }
 
 func TestReadCookie(t *testing.T) {

listeners.go

@@ -391,10 +391,13 @@ func (na NetworkAddress) port() string {
 	return fmt.Sprintf("%d-%d", na.StartPort, na.EndPort)
 }
 
-// String reconstructs the address string to the form expected
-// by ParseNetworkAddress(). If the address is a unix socket,
-// any non-zero port will be dropped.
+// String reconstructs the address string for human display.
+// The output can be parsed by ParseNetworkAddress(). If the
+// address is a unix socket, any non-zero port will be dropped.
 func (na NetworkAddress) String() string {
+	if na.Network == "tcp" && (na.Host != "" || na.port() != "") {
+		na.Network = "" // omit default network value for brevity
+	}
 	return JoinNetworkAddress(na.Network, na.Host, na.port())
 }
 
@@ -427,23 +430,24 @@ func isListenBindAddressAlreadyInUseError(err error) bool {
 func ParseNetworkAddress(addr string) (NetworkAddress, error) {
 	var host, port string
 	network, host, port, err := SplitNetworkAddress(addr)
-	if network == "" {
-		network = "tcp"
-	}
 	if err != nil {
 		return NetworkAddress{}, err
 	}
+	if network == "" {
+		network = "tcp"
+	}
 	if isUnixNetwork(network) {
 		return NetworkAddress{
 			Network: network,
 			Host:    host,
 		}, nil
 	}
+	var start, end uint64
+	if port != "" {
 		ports := strings.SplitN(port, "-", 2)
 		if len(ports) == 1 {
 			ports = append(ports, ports[0])
 		}
-	var start, end uint64
 		start, err = strconv.ParseUint(ports[0], 10, 16)
 		if err != nil {
 			return NetworkAddress{}, fmt.Errorf("invalid start port: %v", err)
@@ -458,6 +462,7 @@ func ParseNetworkAddress(addr string) (NetworkAddress, error) {
 		if (end - start) > maxPortSpan {
 			return NetworkAddress{}, fmt.Errorf("port range exceeds %d ports", maxPortSpan)
 		}
+	}
 	return NetworkAddress{
 		Network:   network,
 		Host:      host,
@@ -478,6 +483,19 @@ func SplitNetworkAddress(a string) (network, host, port string, err error) {
 		return
 	}
 	host, port, err = net.SplitHostPort(a)
+	if err == nil || a == "" {
+		return
+	}
+	// in general, if there was an error, it was likely "missing port",
+	// so try adding a bogus port to take advantage of standard library's
+	// robust parser, then strip the artificial port before returning
+	// (don't overwrite original error though; might still be relevant)
+	var err2 error
+	host, port, err2 = net.SplitHostPort(a + ":0")
+	if err2 == nil {
+		err = nil
+		port = ""
+	}
 	return
 }
 

listeners_test.go

@@ -33,8 +33,23 @@ func TestSplitNetworkAddress(t *testing.T) {
 		},
 		{
 			input:      "foo",
+			expectHost: "foo",
+		},
+		{
+			input: ":", // empty host & empty port
+		},
+		{
+			input:     "::",
 			expectErr: true,
 		},
+		{
+			input:      "[::]",
+			expectHost: "::",
+		},
+		{
+			input:      ":1234",
+			expectPort: "1234",
+		},
 		{
 			input:      "foo:1234",
 			expectHost: "foo",
@@ -80,10 +95,10 @@ func TestSplitNetworkAddress(t *testing.T) {
 	} {
 		actualNetwork, actualHost, actualPort, err := SplitNetworkAddress(tc.input)
 		if tc.expectErr && err == nil {
-			t.Errorf("Test %d: Expected error but got: %v", i, err)
+			t.Errorf("Test %d: Expected error but got %v", i, err)
 		}
 		if !tc.expectErr && err != nil {
-			t.Errorf("Test %d: Expected no error but got: %v", i, err)
+			t.Errorf("Test %d: Expected no error but got %v", i, err)
 		}
 		if actualNetwork != tc.expectNetwork {
 			t.Errorf("Test %d: Expected network '%s' but got '%s'", i, tc.expectNetwork, actualNetwork)
@@ -170,7 +185,16 @@ func TestParseNetworkAddress(t *testing.T) {
 		},
 		{
 			input: ":",
-			expectErr: true,
+			expectAddr: NetworkAddress{
+				Network: "tcp",
+			},
+		},
+		{
+			input: "[::]",
+			expectAddr: NetworkAddress{
+				Network: "tcp",
+				Host:    "::",
+			},
 		},
 		{
 			input: ":1234",