* httpcaddyfile: ensure hosts to skip can always be collected
Previously, some hosts that should be skipped in logging would
be missed as the current logic would only collect them after
encountering the first server that would log. This change makes sure
the ServerLogConfig is initialized before iterating over the server
blocks.
* httpcaddyfile: add test case for skip hosts behavior
If an email is specified in global options, a site called 'localhost' shouldn't be bunched together with public DNS names in the automation policies, which get the default, public-CA issuers. Fix old test that did this.
I also noticed that these two:
localhost {
}
example.com {
}
and
localhost, example.com {
}
produce slightly different TLS automation policies. The former is what the new test case covers, and we have logic that removes the empty automation policy for localhost so that auto-HTTPS can implicitly create one. (We prefer that whenever possible.) But the latter case produces two automation policies, with the second one being for localhost, with an explicit internal issuer. It's not wrong, just more explicit than it needs to be.
I'd really like to completely rewrite the code from scratch that generates automation policies, hopefully there is a simpler, more correct algorithm.
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyfile: Fix `import` replacing unrelated placeholders
See https://caddy.community/t/snippet-issue-works-outside-snippet/12231
So it turns out that `NewReplacer()` gives a replacer with some global defaults (like `{env.*}` and some system and time placeholders), which is not ideal when running `import` because we just want to replace `{args.*}` only, and nothing else.
* caddyfile: Add test
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
This filter is intended to be useful in scenarios where you may want to
redact a value with a static string, giving you information that the
field did previously exist and was present, but not revealing the value
itself in the logs.
This was inspired by work on adding more complete support for removing
sensitive values from logs [1]. An example use case would be the
Authorization header in request log output, for which the value should
usually not be logged, but it may be quite useful for debugging to
confirm that the header was present in the request.
[1] https://github.com/caddyserver/caddy/issues/3958
This change is aimed at enhancing the logging module within the
Caddyfile directive to allow users to configure logs other than the HTTP
access log stream, which is the current capability of the Caddyfile [1].
The intent here is to leverage the same syntax as the server log
directive at a global level, so that similar customizations can be added
without needing to resort to a JSON-based configuration.
Discussion for this approach happened in the referenced issue.
Closes https://github.com/caddyserver/caddy/issues/3958
[1] https://caddyserver.com/docs/caddyfile/directives/log
Previous commit improved the Caddyfile adapter so it doesn't unnecessarily add names to "skip" in "auto_https" when the server is already HTTP-only.
This commit updates the tests to reflect that change, while also fixing the Caddyfile formatting in many of the tests.
We also print the line number of the divergence between input and formatted version in Caddyfile adapt warnings - very useful for finding initial formatting problems.
This is probably an invasive change, but existing tests continue to pass.
It seems to make sense this way. There is likely an edge case I haven't
considered.
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* add integration test for null header matcher
* implement null header matcher syntax
* avoid repeating magic !
* check for field following ! character
* httpcaddyfile: First pass at implementing server options
* httpcaddyfile: Add listener wrapper support
* httpcaddyfile: Sort sbaddrs to make adapt output more deterministic
* httpcaddyfile: Add server options adapt tests
* httpcaddyfile: Windows line endings lol
* caddytest: More windows line endings lol (sorry Matt)
* Update caddyconfig/httpcaddyfile/serveroptions.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Reword listener address "matcher"
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Deprecate experimental_http3 option (moved to servers)
* httpcaddyfile: Remove validation step, no longer needed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* fileserver: Improve and clarify file hiding logic
* Oops, forgot to run integration tests
* Make this one integration test OS-agnostic
* See if this appeases the Windows gods
* D'oh
