* log: make `sink` encodable
* deduplicate logger fields
* extract common fields into `BaseLog` and embed it into `SinkLog`
* amend godoc on `BaseLog` and `SinkLog`
* minor style change
---------
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* cmd: Expand cobra support
* Convert commands to cobra, add short flags
* Fix version command typo
Co-authored-by: Emily Lange <git@indeednotjames.com>
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
---------
Co-authored-by: Emily Lange <git@indeednotjames.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* added some tests for parseUpstreamDialAddress
Test 4 fails because it produces "[[::1]]:80" instead of "[::1]:80"
* support absolute windows path in unix reverse proxy address
* make IsUnixNetwork public, support +h2c and reuse it
* add new tests
* If upstreams are all using same host but with different ports
ie:
foobar:4001
foobar:4002
foobar:4003
...
Because fnv-1a has not a good enough avalanche effect
Then the hostByHashing result is not well balanced over
all upstreams
As last byte FNV input tend to affect few bits, the idea is to change
the concatenation order between the key and the upstream strings
So the upstream last byte have more impact on hash diffusion
* reverseproxy: Mask the WS close message when we're the client
* weakrand
* Bump golangci-lint version so path ignores work on Windows
* gofmt
* ugh, gofmt everything, I guess
e338648fed introduced multiple upstream
addresses. A comment notes that mixing schemes isn't supported and
therefore the first valid scheme is supposed to be used.
Fixes setting the first scheme.
fixes#5087
Ideally I'd just remove the parameter to caddy.Context.Logger(), but
this would break most Caddy plugins.
Instead, I'm making it variadic and marking it as partially deprecated.
In the future, I might completely remove the parameter once most
plugins have updated.
* feat: Multiple 'to' upstreams in reverse-proxy cmd
* Repeat --to for multiple upstreams, rather than comma-separating in a single flag
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Close hijacked conns on reload/quit
We also send a Close control message to both ends of
WebSocket connections. I have tested this many times in
my dev environment with consistent success, although
the variety of scenarios was limited.
* Oops... actually call Close() this time
* CloseMessage --> closeMessage
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use httpguts, duh
* Use map instead of sync.Map
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* break up code and use lazy reading and pool bufio.Writer
* close underlying connection when operation failed
* allocate bufWriter and streamWriter only once
* refactor record writing
* rebase from master
* handle err
* Fix type assertion
Also reduce some duplication
* Refactor client and clientCloser for logging
Should reduce allocations
* Minor cosmetic adjustments; apply Apache license
* Appease the linter
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
This allows users to, for example, get upstreams from multiple SRV
endpoints in order (such as primary and secondary clusters).
Also, gofmt went to town on the comments, sigh
* reverseproxy: Implement retry count, alternative to try_duration
* Add Caddyfile support for `retry_match`
* Refactor to deduplicate matcher parsing logic
* Fix lint
See https://caddy.community/t/using-forward-auth-and-writing-my-own-authenticator-in-php/16410, apparently it didn't work when `copy_headers` wasn't used. This is because we were skipping adding a handler to the routes in the "good response handler", but this causes the logic in `reverseproxy.go` to ignore the response handler since it's empty. Instead, we can just always put in the `header` handler, even with an empty `Set` operation, it's just a no-op, but it fixes that condition in the proxy code.
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
* Added SkipTLSPorts option to http transport.
* Fix typo in test config file.
* Rename config option as suggested by Matt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update code to match renamed config option.
* Fix typo in config option name.
* Fix another typo that I missed.
* Tests not completing because of apparent wrong ordering of options.
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
In v2.5.0, upstream health was fixed such that whether an upstream is
considered healthy or not is mostly up to each individual handler's
config. Since "healthy" is an opinion, it is not a global value.
I unintentionally left in the "healthy" field in the API endpoint for
checking upstreams, and it is now misleading (see #4792).
However, num_requests and fails remains, so health can be determined by
the API client, rather than having it be opaquely (and unhelpfully)
determined for the client.
If we do restore this value later on, it'd need to be replicated once
per reverse_proxy handler according to their individual configs.
* reverseproxy: Improve hashing LB policies with HRW
Previously, if a list of upstreams changed, hash-based LB policies
would be greatly affected because the hash relied on the position of
upstreams in the pool. Highest Random Weight or "rendezvous" hashing
is apparently robust to pool changes. It runs in O(n) instead of
O(log n), but n is very small usually.
* Fix bug and update tests
* reverseproxy: Sync up `handleUpgradeResponse` with stdlib
I had left this as a TODO for when we bump to minimum 1.17, but I should've realized it was under `internal` so it couldn't be used directly.
Copied the functions we needed for parity. Hopefully this is ok!
* Add tests and fix godoc comments
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* reverseproxy: Make shallow-ish clone of the request
* Refactor request cloning into separate function
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* fastcgi: Fix a TODO, prevent zap using reflection for logging env
* Update modules/caddyhttp/reverseproxy/fastcgi/fastcgi.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* reverseproxy: Adjust defaults, document defaults
Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6.
- Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release.
- Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost!
- Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience.
* reverseproxy: Make keepalive interval configurable via Caddyfile
* fastcgi: DialTimeout default for fastcgi transport too
* caddyhttp: Sanitize scheme and host on incoming requests
* reverseproxy: Sanitize the URL scheme and host before proxying
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
From reading through the code, I think this code path is now obsoleted by the changes made in https://github.com/caddyserver/caddy/pull/4266.
Basically, `h.flushInterval()` will set the flush interval to `-1` if we're in a bi-directional stream, and the recent PR ensured that `h.copyResponse()` properly flushes headers immediately when the flush interval is non-zero. So now there should be no need to call Flush before calling `h.copyResponse()`.
Also split the Caddyfile subdirective keepalive_idle_conns into two properties so the conns and conns_per_host can be set separately.
This is technically a breaking change, but probably anyone who this breaks already had a broken config anyway, and silently fixing it won't help them fix their configs.
Turns out this was an oversight, we assumed we could use `{http.response.header.*}` but that doesn't work because those are grabbed from the response writer, and we haven't copied any headers into the response writer yet.
So the fix is to set all the response headers into the replacer at a new namespace before running the handlers.
This adds the `{http.reverse_proxy.header.*}` replacer.
See https://caddy.community/t/empty-http-response-header-x-accel-redirect/12447
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: reverseproxy: fix hash selection policy
Fixes: #4135
Test: go test './...' -count=1
* caddyhttp: reverseproxy: add test to catch #4135
If you revert the last commit, the test will fail.
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
* reverseproxy: Add duration/latency placeholders (close#4012) (and #2268)
Adds 4 placeholders, one is actually outside reverse proxy though:
{http.request.duration} is how long since the server decoded the HTTP request (headers).
{http.reverse_proxy.upstream.latency} is how long it took a proxy upstream to write the response header.
{http.reverse_proxy.upstream.duration} is total time proxying to the upstream, including writing response body to client.
{http.reverse_proxy.duration} is total time spent proxying, including selecting an upstream and retries.
Obviously, most of these are only useful at the end of a request, like when writing response headers or logs.
See also: https://caddy.community/t/any-equivalent-of-request-time-and-upstream-header-time-from-nginx/11418
* Add new placeholders to documentation
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
* fastcgi: Set PATH_INFO to file matcher remainder as fallback
* fastcgi: Avoid changing scriptName when not necessary
* Stylistic tweaks
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* fix(caddy): Avoid "operation was canceled" errors
- Also add error handling for StatusGatewayTimeout
* revert(caddy): Revert 504 handling
- This will potentially break load balancing and health checks
* Handle client cancellation as different error
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Enable error logging for connection upgrades
* reverseproxy: Change some of the error levels, unsugar
* Use unsugared log in one spot
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
* reverseproxy: Fix dial placeholders, SRV, active health checks
Supercedes #3776
Partially reverts or updates #3756, #3693, and #3695
* reverseproxy: add integration tests
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* reverseproxy: fix breakage in handling SRV lookup introduced by 3695
* reverseproxy: validate against incompatible config options with lookup_srv
* reverseproxy: add integration test cases for validations involving lookup_srv
* reverseproxy: clarify the reason for skipping an iteration
* grammar.. Oxford comma
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Fixes#3753
* reverseproxy: construct active health-check transport from scratch (Fixes#3691)
* reverseproxy: do upstream health-check on the correct alternative port
* reverseproxy: add integration test for health-check on alternative port
* reverseproxy: put back the custom transport for health-check http client
* reverseproxy: cleanup health-check integration test
* reverseproxy: fix health-check of unix socket upstreams
* reverseproxy: skip unix socket tests on Windows
* tabs > spaces
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* make the linter (and @francislavoie) happy
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* One more lint fix
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* ci: Try Go 1.15 RC1 out of curiosity
* Go 1.15 was released; let's try it
* Update to latest quic-go
* Attempt at fixing broken test
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
