* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
* Added SkipTLSPorts option to http transport.
* Fix typo in test config file.
* Rename config option as suggested by Matt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update code to match renamed config option.
* Fix typo in config option name.
* Fix another typo that I missed.
* Tests not completing because of apparent wrong ordering of options.
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* reverseproxy: Adjust defaults, document defaults
Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6.
- Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release.
- Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost!
- Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience.
* reverseproxy: Make keepalive interval configurable via Caddyfile
* fastcgi: DialTimeout default for fastcgi transport too
Also split the Caddyfile subdirective keepalive_idle_conns into two properties so the conns and conns_per_host can be set separately.
This is technically a breaking change, but probably anyone who this breaks already had a broken config anyway, and silently fixing it won't help them fix their configs.
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
* reverseproxy: Fix Caddyfile parsing for empty non-http transports
* Update modules/caddyhttp/reverseproxy/caddyfile.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Rename empty transport test
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddy: Add support for `d` duration unit
* Improvements to ParseDuration; add unit tests
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
An upstream like https://localhost:80 is still forbidden, but an addr of
localhost:80 can be used while explicitly enabling TLS as an override;
we just don't allow the implicit behavior to be ambiguous.
* reverse_proxy: Initial attempt at H2C transport/client support (#3218)
I have not tested this yet
* Experimentally enabling H2C server support (closes#3227)
See also #3218
I have not tested this
* reverseproxy: Clean up H2C transport a bit
* caddyhttp: Update godoc for h2c server; clarify experimental status
* caddyhttp: Fix trailers when recording responses (fixes#3236)
* caddyhttp: Tweak h2c config settings and docs
This makes it more convenient to configure quick proxies that use HTTPS
but also introduces a lot of logical complexity. We have to do a lot of
verification for consistency and errors.
Path and query string is not supported (i.e. no rewriting).
Scheme and port can be inferred from each other if HTTP(S)/80/443.
If omitted, defaults to HTTP.
Any explicit transport config must be consistent with the upstream
schemes, and the upstream schemes must all match too.
But, this change allows a config that used to require this:
reverse_proxy example.com:443 {
transport http {
tls
}
}
to be reduced to this:
reverse_proxy https://example.com
which is really nice syntactic sugar (and is reminiscent of Caddy 1).
Allows specifying ca certs with by filename in
`reverse_proxy.transport`.
Example
```
reverse_proxy /api api:443 {
transport http {
tls
tls_trusted_ca_certs certs/rootCA.pem
}
}
```
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
This PR enables the use of placeholders in an upstream's Dial address.
A Dial address must represent precisely one socket after replacements.
See also #998 and #1639.
