* httpcaddyfile: Fixes for prefer_wildcard mode
The wildcard hosts need to be collected first, then considered after, because there's no guarantee that all non-wildcards will appear after all wildcards when looping. Also we should not add a domain to Skip if it doesn't qualify for TLS anyway.
* Alternate solution by avoiding adding APs altogether if covered by wildcard
* caddy adapt for listen_protocols
* adapt listen_socket
* allow multiple listen sockets for port ranges and readd socket fd listen logic
* readd logic to start servers according to listener protocols
* gofmt
* adapt caddytest
* gosec
* fmt and rename listen to listenWithSocket
* fmt and rename listen to listenWithSocket
* more consistent error msg
* non unix listenReusableWithSocketFile
* remove unused func
* doc comment typo
* nonosec
* commit
* doc comments
* more doc comments
* comment was misleading, cardinality did not change
* addressesWithProtocols
* update test
* fd/ and fdgram/
* rm addr
* actually write...
* i guess we doin' "skip": now
* wrong var in placeholder
* wrong var in placeholder II
* update param name in comment
* dont save nil file pointers
* windows
* key -> parsedKey
* osx
* multiple default_bind with protocols
* check for h1 and h2 listener netw
* Add option to configure certificate lifetime
* Bump CertMagic dep to latest master commit
* Apply suggestions and ran go mod tidy
* Update modules/caddytls/acmeissuer.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
---------
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyfile: Populate regexp matcher names by default
* Some lint cleanup that my VSCode complained about
* Pass down matcher name through expression matcher
* Compat with #6113: fix adapt test, set both styles in replacer
* use gofmput to format code
* use gci to format imports
* reconfigure gci
* linter autofixes
* rearrange imports a little
* export GOOS=windows golangci-lint run ./... --fix
* httpcaddyfile: Skip some logic if auto_https off
* Try removing this check altogether...
* Refine test timeouts slightly, sigh
* caddyhttp: Assume udp for unrecognized network type
Seems like the reasonable thing to do if a plugin registers its own
network type.
* Add comment to document my lack of knowledge
* Clean up and prepare to merge
Add comments to try to explain what happened
Guh, this is complicated.
Fixes#4640
This also follows up on #4398 (reverting it) which made a change that technically worked, but was incorrect. It changed the condition in `hostsFromKeysNotHTTP` from `&&` to `||`, but then the function no longer did what its name said it would do, and it would return hosts even if they were marked with `http://`, if they used a non-HTTP port. That wasn't the intent of it. The test added in there was kept though, because it is a valid usecase.
The actual fix is to check _earlier_ whether all the addresses explicitly have `http://`, and if so we can short circuit and skip considering the rest.
Huge thank-you to Tailscale (https://tailscale.com) for making this change possible!
This is a great feature for Caddy and Tailscale is a great fit for a standard implementation.
* caddytls: GetCertificate modules; Tailscale
* Caddyfile support for get_certificate
Also fix AP provisioning in case of empty subject list (persist loaded
module on struct, much like Issuers, to surive reprovisioning).
And implement start of HTTP cert getter, still WIP.
* Update modules/caddytls/automation.go
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use tsclient package, check status for name
* Implement HTTP cert getter
And use reuse CertMagic's PEM functions for private keys.
* Remove cache option from Tailscale getter
Tailscale does its own caching and we don't need the added complexity...
for now, at least.
* Several updates
- Option to disable cert automation in auto HTTPS
- Support multiple cert managers
- Remove cache feature from cert manager modules
- Minor improvements to auto HTTPS logging
* Run go mod tidy
* Try to get certificates from Tailscale implicitly
Only for domains ending in .ts.net.
I think this is really cool!
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
If an email is specified in global options, a site called 'localhost' shouldn't be bunched together with public DNS names in the automation policies, which get the default, public-CA issuers. Fix old test that did this.
I also noticed that these two:
localhost {
}
example.com {
}
and
localhost, example.com {
}
produce slightly different TLS automation policies. The former is what the new test case covers, and we have logic that removes the empty automation policy for localhost so that auto-HTTPS can implicitly create one. (We prefer that whenever possible.) But the latter case produces two automation policies, with the second one being for localhost, with an explicit internal issuer. It's not wrong, just more explicit than it needs to be.
I'd really like to completely rewrite the code from scratch that generates automation policies, hopefully there is a simpler, more correct algorithm.
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
This is probably an invasive change, but existing tests continue to pass.
It seems to make sense this way. There is likely an edge case I haven't
considered.
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* httpcaddyfile: Revise automation policy generation
This should fix a frustrating edge case where wildcard subjects are
used, which potentially get shadowed by more specific versions of
themselves; see the new tests for an example. This change is motivated
by an actual customer requirement.
Although all the tests pass, this logic is incredibly complex and
nuanced, and I'm worried it is not correct. But it took me about 4 days
to get this far on a solution. I did my best.
* Fix typo
We have users that have site blocks like *.*.tld with on-demand TLS
enabled. While *.*.tld does not qualify for a publicly-trusted cert due
to its wildcards, On-Demand TLS does not actually obtain a cert with
those wildcards, since it uses the actual hostname on the handshake.
This improves on that logic, but I am still not 100% satisfied with the
result since I think we need to also check if another site block is more
specific, like foo.example.tld, which might not have on-demand TLS
enabled, and make sure an automation policy gets created before the
more general policy with on-demand...
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Adds global options for external account bindings
* Maybe other people use ctags too?
* Use nested block to configure external account
* go format files
* Restore acme_ca directive in test file
* Change Caddyfile config syntax for acme_eab
* Update test
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
