* Add zstd compression level support
* Refactored zstd levels to string arguments
fastest, default, better, best
* Add comment with list of all available levels
* Corrected data types for config
---------
Co-authored-by: Evgeny Blinov <e.a.blinov@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* use gofmput to format code
* use gci to format imports
* reconfigure gci
* linter autofixes
* rearrange imports a little
* export GOOS=windows golangci-lint run ./... --fix
* caddyhttp: Make use of http.ResponseController
Also syncs the reverseproxy implementation with stdlib's which now uses ResponseController as well 2449bbb5e6
* Enable full-duplex for HTTP/1.1
* Appease linter
* Add warning for builds with Go 1.20, so it's less surprising to users
* Improved godoc for EnableFullDuplex, copied text from stdlib
* Only wrap in encode if not already wrapped
* reverseproxy: Mask the WS close message when we're the client
* weakrand
* Bump golangci-lint version so path ignores work on Windows
* gofmt
* ugh, gofmt everything, I guess
* fix encode handler header manipulation
also avoid implementing ReadFrom because it breaks when io.Copied to directly
* strconv.Itoa should be tried as a last resort
WriteHeader during Close
* encode: ignore flushing until after first write (fix#4314)
The first write will determine if encoding has to be done and will add an Content-Encoding. Until then Flushing has to be delayed so the Content-Encoding header can be added before headers and status code is written. (A passthrough flush would write header and status code)
* Update modules/caddyhttp/encode/encode.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Tweak compression settings
zstd: Limit window sizes to 128K to keep memory in control both server and client size.
zstd: Write 0 length frames. This may be needed for compatibility.
zstd: Create fewer encoders. Small memory improvement.
gzip: Allow -2 (Huffman only) and -3 (stateless) compression modes.
* Update modules/caddyhttp/encode/zstd/zstd.go
Update docs.
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
Use piles from which to draw config values.
Module values can return their name, so now we can do two-way mapping
from value to name and name to value; whereas before we could only map
name to value. This was problematic with the Caddyfile adapter since
it receives values and needs to know the name to put in the config.
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.
Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
