This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This allows for finer-grained control when choosing alternate chains than
simply the previous/Certbot-esque behavior of "choose first chain that
contains an issuer's common name." This update allows you to sort by
length (if optimizing for efficiency on the wire) and also to select the
chain with a specific root CommonName.
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
Update internal issuer for compatibility -- yay simpler code!
The .1 version also fixes non-critical SAN extensions that caused trust
issues on several clients.
* ci: Try Go 1.15 RC1 out of curiosity
* Go 1.15 was released; let's try it
* Update to latest quic-go
* Attempt at fixing broken test
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* cel: fix validation of expression result type
The earlier code used the proto.Equals from github.com/gogo/protobuf, which failed to compare two messages of the same type for some reason. Switching to proto.Equal from the canonical github.com/golang/protobuf fixes the issue.
* deps: remove deprecated github.com/golang/protobuf in favor of google.golang.org/protobuf
* downgrade github.com/smallstep/nosql to resolve warning pb.proto warning
* pki: Initial commit of embedded ACME server (#3021)
* reverseproxy: Support auto-managed TLS client certificates (#3021)
* A little cleanup after today's review session
Moving to https://github.com/caddyserver/circuitbreaker
Nobody was using it anyway -- it works well, but something got fumbled
in a refactoring *months* ago. Turns out that we forgot the interface
guards AND botched a method name (my bad) - Ok() should have been OK().
So it would always have thrown a runtime panic if it tried to be loaded.
The module itself works well, but obviously nobody used it because
nobody reported the error. Fixing this while we move it to the new repo.
Removing this removes the last Bazaar/Launchpad dependency (I think).
Certificate selection used to be a module, but this seems unnecessary,
especially since the built-in CustomSelectionPolicy allows quite complex
selection logic on a number of fields in certs. If we need to extend
that logic, we can, but I don't think there are SO many possibilities
that we need modules.
This update also allows certificate selection to choose between multiple
matching certs based on client compatibility and makes a number of other
improvements in the default cert selection logic, both here and in the
latest CertMagic.
The hardest part of this was the conn policy consolidation logic
(Caddyfile only, of course). We have to merge connection policies that
we can easily combine, because if two certs are manually loaded in a
Caddyfile site block, that produces two connection policies, and each
cert is tagged with a different tag, meaning only the first would ever
be selected. So given the same matchers, we can merge the two, but this
required improving the Tag selection logic to support multiple tags to
choose from, hence "tags" changed to "any_tag" or "all_tags" (but we
use any_tag in our Caddyfile logic).
Combining conn policies with conflicting settings is impossible, so
that should return an error if two policies with the exact same matchers
have non-empty settings that are not the same (the one exception being
any_tag which we can merge because the logic for them is to OR them).
It was a bit complicated. It seems to work in numerous tests I've
conducted, but we'll see how it pans out in the release candidates.
* caddyhttp: Implement CEL matcher (see #3051)
CEL (Common Expression Language) is a very fast, flexible way to express
complex logic, useful for matching requests when the conditions are not
easy to express with JSON.
This matcher may be considered experimental even after the 2.0 release.
* Improve CEL module docs
* pki: Initial commit of PKI app (WIP) (see #2502 and #3021)
* pki: Ability to use root/intermediates, and sign with root
* pki: Fix benign misnamings left over from copy+paste
* pki: Only install root if not already trusted
* Make HTTPS port the default; all names use auto-HTTPS; bug fixes
* Fix build - what happened to our CI tests??
* Fix go.mod
This is a breaking change primarily in two areas:
- Storage paths for certificates have changed
- Slight changes to JSON config parameters
Huge improvements in this commit, to be detailed more in
the release notes.
The upcoming PKI app will be powered by Smallstep libraries.
* httpcaddyfile: Begin implementing log directive, and debug mode
For now, debug mode just sets the log level for all logs to DEBUG
(unless a level is specified explicitly).
* httpcaddyfile: Finish 'log' directive
Also rename StringEncoder -> SingleFieldEncoder
* Fix minor bug in replacer (when vals are empty)
This is temporary as we prepare for a stable v2 release. We don't want
to make promises we don't know we can keep, and the Starlark integration
deserves much more focused attention which resources and funding do not
currently permit. When the project is financially stable, I will be able
to revisit this properly and add flexible, robust Starlark scripting
support to Caddy 2.
If user provides their own certs or makes any hostname-specific TLS
connection policy, it means that no TLS connection would be served for
any other hostnames, even though you'd expect that TLS is enabled for
them, too. So now we append a catch-all conn policy if none exist, which
allows all ClientHellos to be matched and served.
We also fix the consolidation of automation policies, which previously
gobbled up automation policies without hosts in favor of automation
policies with hosts. Instead of a host-specific policy eating up an
identical catch-all policy, the catch-all policy eats up the identical
host-specific policy, ensuring that the policy is applied to all hosts
which need it.
See also:
https://caddy.community/t/v2-automatic-https-certificate-errors/6847/9?u=matt
This is necessary to avoid a race for sockets. Both the HTTP servers and
CertMagic solvers will try to bind the HTTP/HTTPS ports, but we need to
make sure that our HTTP servers bind first. This is kind of a new thing
now that management is async in Caddy 2.
Also update to CertMagic 0.9.2, which fixes some async use cases at
scale.
Fixed several bugs and made other improvements. All config changes are
now mediated by the global config state manager. It used to be that
initial configs given at startup weren't tracked, so you could start
caddy with --config caddy.json and then do a GET /config/ and it would
return null. That is fixed, along with several other general flow/API
enhancements, with more to come.
* logging: Initial implementation
* logging: More encoder formats, better defaults
* logging: Fix repetition bug with FilterEncoder; add more presets
* logging: DiscardWriter; delete or no-op logs that discard their output
* logging: Add http.handlers.log module; enhance Replacer methods
The Replacer interface has new methods to customize how to handle empty
or unrecognized placeholders. Closes#2815.
* logging: Overhaul HTTP logging, fix bugs, improve filtering, etc.
* logging: General cleanup, begin transitioning to using new loggers
* Fixes after merge conflict
* fuzz: lay down the foundation for continuous fuzzing
* improve the fuzzers and add some
* fuzz: add Fuzzit badge to README & enable fuzzers submission in CI
* v2-fuzz: do away with the submodule approach for fuzzers
* fuzz: enable fuzzit
Making them pointers makes for cleaner JSON when adapting configs, if
the struct is empty now it will be omitted entirely.
The x/time/rate package was updated to support changing the burst, so
we've incorporated that here and removed a TODO.
* Begin WIP integration of HTTP/3 support
* http3: Set actual Handler, make fakeClosePacketConn type for UDP sockets
Also use latest quic-go for ALPN fix
* Manually keep track of and close HTTP/3 listeners
* Update quic-go after working through some http3 bugs
* Fix go mod
* Make http3 optional for now
* set automatic https error type for cert-magic failures
* add state to onload and unload methods
* update reverse proxy to use Provision() and Cleanup()
