* metrics: Fixing panic while observing with bad exemplars
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Minor cleanup
The server is already added to the context. So, we can simply use that
to get the server name, which is a field on the server.
* Add integration test for auto HTTP->HTTPS redirects
A test like this would have caught the problem in the first place
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
First try an exact lookup like before, but if it fails, strip the port
and try again. example.com:1234 should still use a logger keyed for
example.com if there is no key example.com:1234.
* adding wildcard matching of logger names
* reordering precedence for more specific loggers to match first
* removing dependence on certmagic and extra loop
Co-authored-by: GregoryDosh <GregoryDosh@users.noreply.github.com>
While building a layer4 app for Caddy, I discovered that we need the
ability to fill a request's context just like the HTTP server does,
hence this exported function PrepareRequest().
* reverse_proxy: Initial attempt at H2C transport/client support (#3218)
I have not tested this yet
* Experimentally enabling H2C server support (closes#3227)
See also #3218
I have not tested this
* reverseproxy: Clean up H2C transport a bit
* caddyhttp: Update godoc for h2c server; clarify experimental status
* caddyhttp: Fix trailers when recording responses (fixes#3236)
* caddyhttp: Tweak h2c config settings and docs
* httpcaddyfile: Exclude access logs written to files from default log
Even though any logs can just be ignored, most users don't seem to like
configuring an access log to go to a file only to have it doubly appear
in the default log.
Related to:
- #3294
- https://caddy.community/t/v2-logging-format/7642/4?u=matt
- https://caddy.community/t/caddyfile-questions/7651/3?u=matt
* caddyhttp: General improvements to access log controls (fixes#3310)
* caddyhttp: Move log config nil check higher
* Rename LoggerName -> DefaultLoggerName
Sigh, apparently Linux is incapable of distinguishing host interfaces
in socket addresses, even though it works fine on Mac. I suppose we just
have to assume that any listeners with the same port are the same
address, completely ignoring the host interface on Linux... oh well.
Wrapping listeners is useful for composing custom behavior related
to accepting, closing, reading/writing connections (etc) below the
application layer; for example, the PROXY protocol.
* caddytls: Add CipherSuiteName and ProtocolName functions
The cipher_suites.go file is derived from a commit to the Go master
branch that's slated for Go 1.14. Once Go 1.14 is released, this file
can be removed.
* caddyhttp: Use commonLogEmptyValue in common_log replacer
* caddyhttp: Add TLS placeholders
* caddytls: update unsupportedProtocols
Don't export unsupportedProtocols and update its godoc to mention that
it's used for logging only.
* caddyhttp: simplify getRegTLSReplacement signature
getRegTLSReplacement should receive a string instead of a pointer.
* caddyhttp: Remove http.request.tls.client.cert replacer
The previous behavior of printing the raw certificate bytes was ported
from Caddy 1, but the usefulness of that approach is suspect. Remove
the client cert replacer from v2 until a use case is presented.
* caddyhttp: Use tls.CipherSuiteName from Go 1.14
Remove ported version of CipherSuiteName in the process.
This splits automatic HTTPS into two phases. The first provisions the
route matchers and uses them to build the domain set and configure
auto HTTP->HTTPS redirects. This happens before the rest of the
provisioning does.
The second phase takes place at the beginning of the app start. It
attaches pointers to the tls app to each server, and begins certificate
management for the domains that were found in the first phase.
Previously, all matchers in a route would be evaluated before any
handlers were executed, and a composite route of the matching routes
would be created. This made rewrites especially tricky, since the only
way to defer later matchers' evaluation was to wrap them in a subroute,
or to invoke a "rehandle" which often caused bugs.
Instead, this new sequential design evaluates each route's matchers then
its handlers in lock-step; matcher-handlers-matcher-handlers...
If the first matching route consists of a rewrite, then the second route
will be evaluated against the rewritten request, rather than the original
one, and so on.
This should do away with any need for rehandling.
I've also taken this opportunity to avoid adding new values to the
request context in the handler chain, as this creates a copy of the
Request struct, which may possibly lead to bugs like it has in the past
(see PR #1542, PR #1481, and maybe issue #2463). We now add all the
expected context values in the top-level handler at the server, then
any new values can be added to the variable table via the VarsCtxKey
context key, or just the GetVar/SetVar functions. In particular, we are
using this facility to convey dial information in the reverse proxy.
Had to be careful in one place as the middleware compilation logic has
changed, and moved a bit. We no longer compile a middleware chain per-
request; instead, we can compile it at provision-time, and defer only the
evaluation of matchers to request-time, which should slightly improve
performance. Doing this, however, we take advantage of multiple function
closures, and we also changed the use of HandlerFunc (function pointer)
to Handler (interface)... this led to a situation where, if we aren't
careful, allows one request routed a certain way to permanently change
the "next" handler for all/most other requests! We avoid this by making
a copy of the interface value (which is a lightweight pointer copy) and
using exclusively that within our wrapped handlers. This way, the
original stack frame is preserved in a "read-only" fashion. The comments
in the code describe this phenomenon.
This may very well be a breaking change for some configurations, however
I do not expect it to impact many people. I will make it clear in the
release notes that this change has occurred.
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
* fix OOM issue caught by fuzzing
* use ParsedAddress as the struct name for the result of ParseNetworkAddress
* simplify code using the ParsedAddress type
* minor cleanups
Errors in the 4xx range are client errors, and they don't need to be
entered into the server's error logs. 4xx errors are still recorded in
the access logs at the error level.
* logging: Initial implementation
* logging: More encoder formats, better defaults
* logging: Fix repetition bug with FilterEncoder; add more presets
* logging: DiscardWriter; delete or no-op logs that discard their output
* logging: Add http.handlers.log module; enhance Replacer methods
The Replacer interface has new methods to customize how to handle empty
or unrecognized placeholders. Closes#2815.
* logging: Overhaul HTTP logging, fix bugs, improve filtering, etc.
* logging: General cleanup, begin transitioning to using new loggers
* Fixes after merge conflict
* v2: split golangci-lint configuration into its own file to allow code editors to take advantage of it
* v2: simplify code
* v2: set the correct lint output formatting
* v2: invert the logic of linter's configuration of output formatting to allow the editor convenience over CI-specific customization. Customize the output format in CI by passing the flag.
* v2: remove irrelevant golangci-lint config
* Begin WIP integration of HTTP/3 support
* http3: Set actual Handler, make fakeClosePacketConn type for UDP sockets
Also use latest quic-go for ALPN fix
* Manually keep track of and close HTTP/3 listeners
* Update quic-go after working through some http3 bugs
* Fix go mod
* Make http3 optional for now
* Add support for client TLS authentication
Signed-off-by: Alexandre Stein <alexandre_stein@interlab-net.com>
* make and use client authentication struct
* force StrictSNIHost if TLSConnPolicies is not empty
* Implement leafs verification
* Fixes issue when using multiple verification
* applies the comments from maintainers
* Apply comment
* Refactor/cleanup initial TLS client auth implementation
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.
Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
