Commit Graph

22 Commits

Author SHA1 Message Date
Francis Lavoie
9cd472c031
caddyfile: Populate regexp matcher names by default (#6145)
* caddyfile: Populate regexp matcher names by default

* Some lint cleanup that my VSCode complained about

* Pass down matcher name through expression matcher

* Compat with #6113: fix adapt test, set both styles in replacer
2024-04-17 12:19:14 -06:00
Francis Lavoie
d13258423d
vars: Make nil values act as empty string instead of "<nil>" (#6174) 2024-03-21 11:21:53 -06:00
Francis Lavoie
5ed8689629
vars: Allow overriding http.auth.user.id in replacer as a special case (#6108) 2024-03-05 22:25:38 +00:00
Francis Lavoie
750d0b8331
caddyfile: Normalize & flatten all unmarshalers (#6037) 2024-01-23 19:36:59 -05:00
Francis Lavoie
85375861f6
caddyhttp: Fix vars_regexp matcher with placeholders (#5408)
Changed to match the `vars` matcher's logic for handling placeholders
2023-03-02 09:01:54 -07:00
Matthew Holt
7c35bfa57c
caddyhttp: Accept placeholders in vars matcher key
Until now, the vars matcher has unintentionally lacked parity with the
map directive: the destination placeholders of the map directive would
be expressed as placeholders, i.e. {foo}. But the vars matcher would
not use { }: vars foo value

This looked weird, and was confusing, since it implied that the key
could be dynamic, which doesn't seem helpful here.

I think this is a proper bug fix, since we're not used to accessing
placeholders literally without { } in the Caddyfile.
2022-09-01 16:49:18 -06:00
Francis Lavoie
141872ed80
chore: Bump up to Go 1.19, minimum 1.18 (#4925) 2022-08-02 16:39:09 -04:00
Francis Lavoie
ff2ba6de8a
caddyhttp: Clear out matcher error immediately after grabbing it (#4916)
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
2022-07-28 15:19:48 -06:00
Matthew Holt
79cbe7bfd0
httpcaddyfile: Add 'vars' directive
See discussion in #4650
2022-03-22 10:47:21 -06:00
Mohammed Al Sahaf
b82e22b459
caddyhttp: retain all values of vars matcher when specified multiple times (#4629) 2022-03-11 10:55:37 -05:00
Matt Holt
ecac03cdcb
caddyhttp: Enhance vars matcher (#4433)
* caddyhttp: Enhance vars matcher

Enable "or" logic for multiple values.
Fall back to checking placeholders if not a var name.

* Fix tests (thanks @mohammed90 !)
2021-12-13 13:59:58 -07:00
Matthew Holt
501da21f20
General minor improvements to docs 2021-09-24 18:31:01 -06:00
Mohammed Al Sahaf
a33e4b5426
caddyfile: Add support for vars and vars_regexp matchers (#3730)
* caddyfile: support vars and vars_regexp matchers in the caddyfile

* caddyfile: matchers: Brian Kernighan said printf is good debugging tool but didn't say keep them around
2020-09-25 17:50:26 -06:00
Mohammed Al Sahaf
9bdd6caa0b v2: Implement RegExp Vars Matcher (#2997)
* implement regexp var matcher

* use subtests pattern for tests

* be more consistent with naming: MatchVarRE -> MatchVarsRE, var_regexp -> vars_regexp
2020-02-08 12:26:31 -07:00
Matthew Holt
c6bddbfbe2
http: Fix vars matcher 2020-01-22 09:43:42 -07:00
Matt Holt
a5ebec0041
http: Change routes to sequential matcher evaluation (#2967)
Previously, all matchers in a route would be evaluated before any
handlers were executed, and a composite route of the matching routes
would be created. This made rewrites especially tricky, since the only
way to defer later matchers' evaluation was to wrap them in a subroute,
or to invoke a "rehandle" which often caused bugs.

Instead, this new sequential design evaluates each route's matchers then
its handlers in lock-step; matcher-handlers-matcher-handlers...

If the first matching route consists of a rewrite, then the second route
will be evaluated against the rewritten request, rather than the original
one, and so on.

This should do away with any need for rehandling.

I've also taken this opportunity to avoid adding new values to the
request context in the handler chain, as this creates a copy of the
Request struct, which may possibly lead to bugs like it has in the past
(see PR #1542, PR #1481, and maybe issue #2463). We now add all the
expected context values in the top-level handler at the server, then
any new values can be added to the variable table via the VarsCtxKey
context key, or just the GetVar/SetVar functions. In particular, we are
using this facility to convey dial information in the reverse proxy.

Had to be careful in one place as the middleware compilation logic has
changed, and moved a bit. We no longer compile a middleware chain per-
request; instead, we can compile it at provision-time, and defer only the
evaluation of matchers to request-time, which should slightly improve
performance. Doing this, however, we take advantage of multiple function
closures, and we also changed the use of HandlerFunc (function pointer)
to Handler (interface)... this led to a situation where, if we aren't
careful, allows one request routed a certain way to permanently change
the "next" handler for all/most other requests! We avoid this by making
a copy of the interface value (which is a lightweight pointer copy) and
using exclusively that within our wrapped handlers. This way, the
original stack frame is preserved in a "read-only" fashion. The comments
in the code describe this phenomenon.

This may very well be a breaking change for some configurations, however
I do not expect it to impact many people. I will make it clear in the
release notes that this change has occurred.
2020-01-09 10:00:13 -07:00
Matthew Holt
95d944613b
Export Replacer and use concrete type instead of interface
The interface was only making things difficult; a concrete pointer is
probably best.
2019-12-29 13:12:52 -07:00
Matthew Holt
95ed603de7
Improve godocs all around
These will be used in the new automated documentation system
2019-12-23 12:45:35 -07:00
Matt Holt
3c90e370a4
v2: Module documentation; refactor LoadModule(); new caddy struct tags (#2924)
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.

As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.

With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.

This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).

I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.

As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
2019-12-10 13:36:46 -07:00
Matt Holt
b00dfd3965
v2: Logging! (#2831)
* logging: Initial implementation

* logging: More encoder formats, better defaults

* logging: Fix repetition bug with FilterEncoder; add more presets

* logging: DiscardWriter; delete or no-op logs that discard their output

* logging: Add http.handlers.log module; enhance Replacer methods

The Replacer interface has new methods to customize how to handle empty
or unrecognized placeholders. Closes #2815.

* logging: Overhaul HTTP logging, fix bugs, improve filtering, etc.

* logging: General cleanup, begin transitioning to using new loggers

* Fixes after merge conflict
2019-10-28 14:39:37 -06:00
Matthew Holt
c9980fd367
Refactor Caddyfile adapter and module registration
Use piles from which to draw config values.

Module values can return their name, so now we can do two-way mapping
from value to name and name to value; whereas before we could only map
name to value. This was problematic with the Caddyfile adapter since
it receives values and needs to know the name to put in the config.
2019-08-21 10:46:35 -06:00
Matthew Holt
ab885f07b8
Implement config adapters and beginning of Caddyfile adapter
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.

Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
2019-08-09 12:05:47 -06:00