This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
Our group fabrication creates groups with name "my_group_#{n}" where n
is the sequence number of the group being created. However, this can
cause the test to be flaky if and when a group with name `my_group_10`
is created as it will be ordered before
`my_group_9`. This commits makes the group names determinstic to
eliminate any flakiness.
This reverts commit 558bc6b746.
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
* DEV: use active record `save!` instead of mini sql.
The "save" method will trigger the before_save callback "match_primary_group_changes" for User model. Else `flair_group_id` won't be removed from the user.
* check whether the method `match_primary_group_changes` called or not.
Group flair is not removed while removing a user from the group since the `before_save` callback methods are not triggered while using the `update_columns` method.
This PR makes several changes to the group SMTP email contents to make it look more like a support inbox message.
* Remove the context posts, they only add clutter to the email and replies
* Display email addresses of staged users instead of odd generated usernames
* Add a "please reply above this line" message to sent emails
Adds the last updated at and by SMTP/IMAP fields to the UI, we were already storing them in the DB. Also makes sure that `imap_mailbox_name` being changed makes the last_updated_at/by field update for IMAP.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Previously, if the upload_id was present, but the upload was missing, the entire site would give a server error.
We have no foreign keys on this relation, so we have to be able to cope with the situation where the upload_id is present, but the actual upload has been deleted.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
This reverts commit 7fc7090. And fixed the spec test fails.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
