Users can now pin bookmarks from their bookmark list. This will anchor the bookmark to the top of the list, and show a pin icon next to it. This also applies in the nav bookmarks panel. If there are multiple pinned bookmarks they sort by last updated order.
This PR adds MethodProfiler.output_sql_to_stderr! for easier debugging of SQL queries and their timings from the console.
This is almost the same as ensure_discourse_instrumentation! but should not
be used in production (save for debugging in the console), and is only instrumenting
PostgresSQL queries.
This is almost the same as ensure_discourse_instrumentation! but should not
be used in production. This logs all SQL queries run and their durations
between start and stop.
It also works for super long running queries. If you interrupt the long-running
query the latest query data will still be logged after stopping the profiler.
Usage:
```
MethodProfiler.output_sql_to_stderr!(filter_transactions: true)
MethodProfiler.start
# some code that runs queries
timings = MethodProfiler.stop
```
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
Highlight.js changed their default branch from master to main. This switches to the @highlightjs/cdn-assets package, thus sidestepping the problem. It's a slightly cleaner integration though (no need to build locally anymore).
Component SCSS compilation should use the current theme's SCSS color
variables as a fallback before using the default core colors.
This is mostly a backwards-compatibility fix, new themes and components
should use CSS custom properties, which offer better support for on-the-fly
color scheme changes (dark mode support, etc.).
This is not a security issue because regular users are not allowed to insert FA icons anywhere in the app. Admins can insert icons via custom badges, but they do have the ability to create themes with JS.
Get rid of deprecation related to Zeitwerk autoloader.
Original PR was reverted because of multisite bug #12381 - thank you @davidtaylorhq for fixing it.
I added the last commit to fix that multisite problem.
Previosly, if the topic embed request had a missing username parameter,
and SiteSetting.embed_by_username was empty we would fail to create the
new topic and not show any errors.
Now we will fallback using the priority:
1. Username parameter
2. SiteSetting.embed_by_username
3. SiteSetting.site_contact_username
4. system user
Staff can send a post to the review queue by clicking the "Flag Post" button next to "Take Action...". Clicking it flags the post using the "Notify moderators" score type and hides it. A custom message will be sent to the user.
It has been observed that doing a HEAD against an Amazon store URL may result in a 405 error being returned.
Skipping the HEAD request may result in an improved oneboxing experience when requesting these URLs.
The user and an admin could create multiple email change requests for
the same user. If any of the requests was validated and it became
primary, the other request could not be deleted anymore.
Added a new task to test if indexes are coherent with a blank database
This allows us to detect for cases where somehow indexes are out of sync
FIX_INDEXES=1 or `rake db:validate_indexes[fix]` to correct the issues it finds.
Detects:
- Badly named indexes that need to be renamed
- Missing indexes
- Extra indexes
Can correct all 3 with the fix option
* FEATURE: allow category group moderators to pin/unpin topics
Category group moderators should be able to pin/unpin any topics within a category where they have appropraite category group moderator permissions.
Prior to this change, we had weights for very_high, high, low and
very_low. This means there were 4 weights to tweak and what weights to
use for `very_high/high` and `very_low/low` pair was hard to explain.
This change makes it such that `very_high` search priority will always
ensure that the posts are ranked at the top while `very_low` search
priority will ensure that the posts are ranked at the very bottom.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
We were sending 2 emails for user silencing if a message was provided in the UI. Also always send email for user silence and user suspend with reason regardless of whether message provided.
SVG files can have dimensions expressed in inches, centimeters, etc., which may lead to the dimensions being misinterpreted (e.g. “8in” ends up as 8 pixels).
If the file type is `svg`, ask ImageMagick to work out what size the SVG file should be rendered on screen.
NOTE: The `pencil.svg` file was obtained from https://freesvg.org/1534028868, which has placed the file in to the public domain.
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
- removes the option from site settings
- deletes the site setting on existing sites that have it
- marks posts using emojis as requiring a rebake
Note that the actual image files are not removed here, the plan is to
remove them in a few weeks/months (when presumably the rebaking of old
posts has been completed).
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
`Onebox.preview` can return 0-to-n errors, where the errors are missing OpenGraph attributes (e.g. title, description, image, etc.). If any of these attributes are missing, we construct an error message and attach it to the Oneboxer preview HTML. The error message is something like:
“Sorry, we were unable to generate a preview for this web page, because the following oEmbed / OpenGraph tags could not be found: description, image”
However, if the only missing tag is `image` we don’t need to display the error, as we have enough other data (title, description, etc.) to construct a useful/complete Onebox.
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
Uses discourse/onebox@ff9ec90
Adds a hidden site setting called disable_onebox_media_download_controls which will add controlslist="nodownload" to video and audio oneboxes, and also to the local video and audio oneboxes within Discourse.
`rake emails:test` task was always sending `localhost` as the domain name rather than using `smtp[:domain]` (aka `DISCOURSE_SMTP_DOMAIN`. `discourse-setup` has recently been modified to always set `DISCOURSE_SMTP_DOMAIN`, so it's important that this test rake task actually use the value.
I tested this change on a standard production install, and it's working as expected. Hopefully I managed not to bungle the copy/paste of the single line here in the github edit window.
Co-authored-by: Jay Pfaffman <jay@literatecomputing.com>
Previously we were checking truthiness in some places, and `== true` in
others. That can lead to some inconsistent UX where the interface says
the email is valid, but account creation fails.
This commit ensures values are boolean when set, and raises an error for
other value types.
If this safety check is triggered, it means the specific auth provider
needs to be updated to pass booleans.
Version 2.8 brings some changes to how address fields are handled and
this commits updates that and should also include a fix which handles
encoded attachment filenames.
The fork contains a bugfix to correctly decode mail attachments.
NewPostManager’s `post_needs_approval_in_its_category` method should allow category group moderators to create topics/reply to topics that where they have appropraite permissions.
(ie, if a user has permission to moderate a post, any posts made by them shouldn’t be sent to moderation)
`UX` is the officially supported prefix per https://meta.discourse.org/t/19392, but sometimes `UI` is used instead. We should still include those commits.
Adding a scope from a plugin was broken. This commit fixes it and adds a test.
It also documents the instance method and renames the serialized "id" attribute to "scope_id" to avoid a conflict when the scope also has a parameter with the same name.
`convert_to_jpeg!` is only called if `convert_png_to_jpeg?` and/or `should_alter_quality?` is true.
`convert_png_to_jpeg?` can be disabled by setting `SiteSetting.png_to_jpg_quality` to 100.
However, `should_alter_quality?` could be true if `SiteSetting.recompress_original_jpg_quality` was lower than the quality of the uploaded file, regardless of file type.
This commits changes `should_alter_quality?` so that uploaded png files will use the `SiteSetting.png_to_jpg_quality` value, rather than ``SiteSetting.recompress_original_jpg_quality` value.
Still excludes GitHub avatars. Those were the original reason for adding
this broad exclusion. Context at https://meta.discourse.org/t/165713/4
If we find more oneboxes which are unsuitable for thumbnails, we can add
them to this selector.
If no email is provided, email_valid should be set false, so that
Discourse can prompt the user for an email and verify it.
This fixes signups via twitter for accounts with no email address.
Previously we would always take the first image in a post to use as the
thumbnail. On media-heavy sites, users may want to manually select a
specific image as the topic thumbnail. This commit allows this to be
done via a `|thumbnail` attribute in markdown.
For example, in this case, bbb would be chosen as the thumbnail:
```
```
Using our testing Docker image (`discourse/discourse_test:release`) allows us to drop "Update imagemagick" step which shaves ~10 minutes from all runs.
The bug was mentioned on meta https://meta.discourse.org/t/users-are-seeing-handling-of-unhandled-tag-again/155367
It was related to users who are watching a specific topic. In that case, when the hidden tag was added or removed to the topic they were notified by `NotifyTagChangeJob`.
That job should take hidden tags into consideration. If all changed tags are in a hidden group, it should exclude user not belong to that group.
At the same time, if visible to anyone tag is added or removed users watching topic should be notified.
You can use `discourse restore --location=local FILENAME` if you want to restore a backup that is stored locally even though the `backup_location` has the value `s3`.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
Previous markup used to be
```
<div>
<div>
<li>
```
Instead we will now have:
```
<ul>
<li>
<div>
```
Note this commit also adds two things:
- ability to override tagName of a widget when attaching it
- ability to pass opts and otherOpts to {{attach}}, it could be useful in templates but is mostly useful to test `tagName` for now
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This encompasses a lot of work done over the last year, much of which
has already been merged into master. This is the final set of changes
required to get Ember CLI running locally for development.
From here on it will be bug fixes / enhancements.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
To prevent opaque cache files, now all the CDN files will be requested in 'cors' mode if the cdn_cors_enabled global setting is enabled. Before enabling the setting, should enable the cors in the CDN server by adding the response header `access-control-allow-origin: *` or `access-control-allow-origin: https://discourse.example.com.`
And other external file requests other than CDN will not be cached if the response type is opaque.
Disabling shared drafts used to leave topics in an inconsistent state
where they were not displayed as shared drafts and thus there was no
way of publishing them. Moreover, they were accessible just to users
who have permissions to create shared drafts.
This commit adds another permission check that is used for most
operations and the old can_create_shared_draft? remains used just when
creating a new shared draft.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
A simplified version of the logic used in the function before my fix is as follow:
```ruby
result = []
things = [0,1,2,3]
max_values = 2
every = (things.size.to_f / max_values).ceil
things.each_with_index do |t, index|
next unless (t % every) === 0
result << t
end
p result # [0, 2]
# 3 doesn’t get included
```
The problem is that if you get unlucky two times you won't get last tuple(s) and might get a very erroneous date.
Double unlucky:
- last tuple index % computed every !== 0 and you don't get the last tuple
- the last tuple is related to a post with a very different date than the previous tuples (on year difference in our case)
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
It returned a 429 error code with a 'Retry-After' header if a
RateLimiter::LimitExceeded was raised and unhandled, but the header was
missing if the request was limited in the 'RequestTracker' middleware.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
Transient errors in migration are ignored, silently corrupting
data, and the migration is incomplete and misses many sources of
uploads, which will lead to an incorrect expectation of independence
from the remote object storage after announcing that the migration
was successful, regardles of whether transient errors permanently
corrupted the data.
Remove this migration until such time as it is re-written to
follow the same pattern has the migration to s3, moving the
core logic out of the task.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
This PR adds functionality for the IMAP sync code to detect if a UID that is missing from the mail group mailbox is in the Spam/Junk folder for the mail account, and if so delete the associated Discourse topic. This is identical to what we do for emails that are moved for Trash.
If an email is missing but not in Spam or Trash, then we mark the incoming email record with imap_missing: true. This may be used in future to further filter or identify these emails, and perhaps go hunting for them in the email account in bulk.
Note: This adds some code duplication because the trash and spam email detection and handling is very similar. I intend to do more refactors/improvements to the IMAP sync code in time because there is a lot of room for improvement.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
If the sliding window size is N seconds, then a moment at the Nth second
should be considered as the moment outside of the sliding window.
Otherwise, if the sliding window is already full, at the Nth second,
a new call wouldn't be allowed, but a time to wait before the next call
would be equal to zero, which is confusing.
In other words, the end of the time range shouldn't be included in the
sliding window.
Let's say we start at the second 0, and the sliding window size is 10
seconds. In the current version of rate limiter, this sliding window will
be considered as a time range [0, 10] (including the end of the range),
which actually is 11 seconds in length.
After this fix, the time range will be considered as [0, 10)
(excluding the end of the range), which is exactly 10 seconds in length.
It was a problem because during this operation only the first frame
is kept. This commit removes the alternative solution to check if a GIF
image is animated.
* DEV: TopicTrackingState calls should happen in the background
It was observed that calling TopicTrackingState on popular topics could result in a large number of calls to redis, resulting in slow response times when posting replies.
These calls should be moved to a background job.
* DEV: PostUpdateTopicTrackingState should execute on default queue
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
* FIX: Inline onebox should use encoding from Content-Type header when present
* Use Regexp.last_match(1)
Signed-off-by: OsamaSayegh <asooomaasoooma90@gmail.com>
- Only initialize the S3Helper when needed
- Skip initializing the S3Helper for S3Store#cdn_url
- Allow cook_url to be passed a `local` hint to skip unnecessary checks
These are a few small tweaks that slightly improve performance.
- we omitted 1 query from the post guardian which could cause an N+1
- cook_url has been sped up a bit
- url helper avoids re-creating sets for no reason
Inventory on S3 always lagged, over the past few weeks we are noticing that
1 day of lag is not enough.
We are increasing this to 2, to ensure that we do not get false positive
reports.
Final sigma is not lower cased correctly in Ruby causing issues with routing.
This works around the issue by downcasing all usernames containing a sigma using JS.
You can now use `@me` to search for posts created by yourself, this is particularly handy if you have a long username.
`@me rainbow` will find all posts you created with the word rainbow.
Also cleans up test suite so it has no warnings.
This allows plugins to call `register_demon_process` with a Class inheriting from Demon::Base. The unicorn master process will take care of spawning, monitoring and restarting the process. This API should be used with extreme caution, but it is significantly cleaner than spawning processes/threads in an `after_initialize` block.
This commit also cleans up the demon spawning logging so that it uses the same format as unicorn worker logging. It also switches to the block form of `fork` to ensure that Demons exit after running, rather than returning execution to where the fork took place.
`/srv/status` routes should not be cached at all. Also, we want to
decouple the route from Redis which `AnonymouseCache` relies on. The
`/srv/status` should continue to return a success response even if Redis
is down.
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
It used to insert block Oneboxes inside paragraphs which resulted in
invalid HTML. This needed an additional parsing for removal of empty
paragraphs and the resulting HTML could still be invalid.
This commit ensure that block Oneboxes are inserted correctly, by
splitting the paragraph containing the link and putting the block
between the two. Paragraphs left with nothing but whitespaces will
be removed.
Follow up to 7f3a30d79f.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
All the data we need for the `info` and `credentials` auth hash
are obtained via the user info API, not the JWT. Using and verifying
the JWT can fail due to clock skew, so let's skip it completely.
PR opened to fix the upstream issue at https://github.com/zquestz/omniauth-google-oauth2/pull/392
Previously it matched the behavior of standard ActiveRecord after_commit callbacks. They do not work well within `joinable: false` nested transactions. Now `DB.after_commit` callbacks will only be run when the outermost transaction has been committed.
Tests always run inside transactions, so this also introduces some logic to run callbacks once the test-wrapping transaction is reached.
* DEV: More robust processing of URLs
The previous `UrlHelper.encode_component(CGI.unescapeHTML(UrlHelper.unencode(uri))` method would naively process URLs, which could result in a badly formed response.
`Addressable::URI.normalized_encode(uri)` appears to deal with these edge-cases in a more robust way.
* DEV: onebox should use UrlHelper
* DEV: fix spec
* DEV: Escape output when rendering local links
You can let non-staff users use shared drafts by modifying the `shared_drafts_min_trust_level` site setting. These users must have access to the shared draft category.
* FEATURE: Allow Category Group Moderators to edit topic titles
Adds category group moderators to the topic guardian’s `can_edit` method.
The value of `can_edit` is returned by the topic view serializer, and this value determines whether the current user can edit the title/category/tags of the topic directly (which category group moderators could already do by editing the first post of a topic).
Note that the value of `can_edit` is now always returned by the topic view serializer (ie, for both true and false values) to cover the case where a topic is moved out of a category that a category group moderator has permissions on, so that when the topic is reloaded the UI picks up that `can_edit` is now false, and thus the edit icon should no longer be displayed.
* DEV: Add a comment explaining why `can_edit` is always returned
If a category and a sub-category have the same slug, adding a background to one of them will also show it on the other one. This was introduced in 8e3f667 to fix a discrepancy, which was later fixed in 214b4c3.
We can't use erb in ember-cli, and it seems the emoji groups rarely
change anyway. This commit migrates the ERB to pre-rendered javascript
that is updated via the `rake javascript:update_constants` task.
- frowning was using slighty_frowning
- slightly_frowning was using frowning
- grinning_face_with_smiling_eyes was not defined
- fronwing_face_with_open_mouth was not defined
* FEATURE: onebox for local categories
This commit adjusts the category onebox to look more like the category boxes do on the category page.
Co-authored-by: Jordan Vidrine <jordan@jordanvidrine.com>
Force pushing a commit to a theme repository used to break the updater,
because the system was not able to count the commits behind the old and
new version. This operation failed because a force push deleted the old
commits.
The user was prompted with a simple "500 server error" message.
When calculating whether the attached uploads went over the SiteSetting.email_total_attachment_size_limit_kb.kilobytes limit, we were using the original_upload for the calculation instead of the actually attached_upload, which will be smaller in most cases because it can be an optimized image.
This adds a new min_trust_level_to_allow_ignore site setting that enables admins to control the point at which a user is allowed to ignore other users.
After the search term is parsed for advanced search filters, the term may
become empty. Later, the same term will be passed to Discourse.route_for
which will raise an ArgumentError.
> URI(nil)
ArgumentError: bad argument (expected URI object or URI string)
Partial revert of b143412be4 (the refactoring is not reverted)
This broke a few things, so we need to investigate and make some changes before reinstating the error
Hopefully this will prevent fellow developers from spending a morning
trying to figure out why the jobs that are run after a post is created
are not finding the post in the database.
That's because if you're inside a transaction when creating a post, the jobs
will likely run before the transaction is being commited to the database.
There was a "warning" in the comments of the PostCreator class but raising an
exception should hopefully help catch those issue much faster :fingers_crossed:.
This is hard to test since all the tests are run in a transaction...
* FEATURE: display error if Oneboxing fails due to HTTP error
- display warning if onebox URL is unresolvable
- display warning if attributes are missing
* FEATURE: Use new Instagram oEmbed endpoint if access token is configured
Instagram requires an Access Token to access their oEmbed endpoint. The requirements (from https://developers.facebook.com/docs/instagram/oembed/) are as follows:
- a Facebook Developer account, which you can create at developers.facebook.com
- a registered Facebook app
- the oEmbed Product added to the app
- an Access Token
- The Facebook app must be in Live Mode
The generated Access Token, once added to SiteSetting.facebook_app_access_token, will be passed to onebox. Onebox can then use this token to access the oEmbed endpoint to generate a onebox for Instagram.
* DEV: update user agent string
* DEV: don’t do HEAD requests against news.yahoo.com
* DEV: Bump onebox version from 2.1.5 to 2.1.6
* DEV: Avoid re-reading templates
* DEV: Tweaks to onebox mustache templates
* DEV: simplified error message for missing onebox data
* Apply suggestions from code review
Co-authored-by: Gerhard Schlager <mail@gerhard-schlager.at>
This moves the library into our lib folder, and refactored it to more
modern Javascript. I've kept the MIT license at the top of the file.
Doing this allows us to import it as a library in Ember CLI and ditch
yet another global variable.
Previously thumbnails were only preloaded for queries using `TopicQuery#default_results`, which meant that requests for PM topic lists would lead to N+1 queries.
This commit moves the preloading into TopicList#load_topics, along with other similar preloads (e.g. plugin custom fields)
The direct call to `ActiveRecord::Associations::Preloader#preload` is necessary because `@topics` can be an array, not an `ActiveRecord::Relation`
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
CookedPostProcessor replaces all large images with their optimized
versions, but for GIF images the optimized version is limited to first
frame only. This caused animations it cooked posts to require a click
to show up the lightbox and start playing.
Animated emojis were converted to static images. This commit moves the
responsability on site admins to optimize their animated emojis before
uploading them (gifsicle is no longer used).
Plugin client.en.yml and server.en.yml can now be client/server-(1-100).en.yml. 1 is the lowest priority, and 100 is the highest priority. This allows plugins to set their priority higher than other plugins, so that they can override eachothers' translations.
It used to simply say "title is invalid" without giving any hint what
the problem could be. This commit adds different errors messages for
all caps titles, low entropy titles or titles with very long words.
- Bump rails_failover for new per-backend callback feature
- If the master backend fails over, make all sites readonly. And vice-versa for fallback
- If a single backend fails over, make that individual site readonly. And vice-versa for fallback
- When a single backend fails, also check connection to the master backend
Previously, `/u/by-external/{id}` would only work for 'Discourse SSO' systems. This commit adds a new 'provider' parameter to the URL: `/u/by-external/{provider}/{id}`
This is compatible with all auth methods which have migrated to the 'ManagedAuthenticator' pattern. That includes all core providers, and also popular plugins such as discourse-oauth2-basic and discourse-openid-connect.
The new route is admin-only, since some authenticators use sensitive information like email addresses as the external id.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
PostDestroyer should accept the option to permanently destroy post from the database. In addition, when the first post is destroyed it destroys the whole topic.
Currently, that feature is limited to private messages and creator of the post. It will be used by discourse-encrypt to explode encrypted private messages.
When embedding secure images which have been oneboxed, we checked to see if the image's parent's parent had the class onebox-body. This was not always effective as if the image does not get resized/optimized then it does not have the aspect-image div wrapping it. This would cause the image to embed in the email but be huge.
This PR changes the check to see if any of the image's ancestors have the class onebox-body, or if the image has the onebox-avatar class to account for variations in HTML structure.
Per Google, sites are encouraged to upgrade from Universal Analytics v3 `analytics.js` to v4 `gtag.js` for Google Analytics tracking. We're giving admins the option to stay on the v3 API or migrate to v4. Admins can change the implementation they're using via the `ga_version` site setting. Eventually Google will deprecate v3, but our implementation gives admins the choice on what to use for now.
We chose this implementation to make the change less error prone, as many site admins are using custom events via the v3 UA API. With the site stetting defaulted to `v3_analytics`, site analytics won't break until the admin is ready to make the migration.
Additionally, in the v4 implementation, we do not enable automatic pageview tracking (on by default in the v4 API). Instead we rely on Discourse's page change API to report pageviews on transition to avoid double-tracking.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Previous to this change our anonymous rate limits acted as a throttle.
New implementation means we now also consider rate limited requests towards
the limit.
This means that if an anonymous user is hammering the server it will not be
able to get any requests through until it subsides with traffic.
See #10794 for original context.
I did not mean to add invite to the BYPASS_TYPES for Email::Sender, it was supposed to be invite_password_instructions.
A site owner attempting to use both the email_subject site setting and translation overrides for normal post notification
email subjects would find themselves frusturated at the lack of template argument parity.
Make all the variables available for translation overrides by adding the subject variables to the custom interpolation keys list and applying them.
Reported at https://meta.discourse.org/t/customize-subject-format-for-standard-emails/20801/47?u=riking
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
We had an issue where onebox thumbnail was too large and thus was optimized, and we are using the image URLs in post to redact and re-embed, based on the sha1 in the URL. Optimized image URLs have extra stuff on the end like _99x99 so we were not parsing out the sha1 correctly. Another issue I found was for posts that have giant images, the original was being used to embed in the email and thus would basically never get included because it is huge.
For example the URL 787b17ea61_2_690x335.jpeg was not parsed correctly; we would end up with 787b17ea6140f4f022eb7f1509a692f2873cfe35_2_690x335.jpeg as the sha1 which would not find the image to re-embed that was already attached to the email.
This fix will use the first optimized image of the detected upload when we are redacting and then re-embedding to make sure we are not sending giant things in email. Also, I detect if it is a onebox thumbnail or the site icon and force appropriate sizes and styles.
We remove the slow mode composer message and provide better messages when rejecting new posts and edits. The client now validates if the user tries to post again immediately. Finally, we replaced the `hourglass-end` icon with the `hourglass-start` one.
This reverts commit e3de45359f.
We need to improve out strategy by adding a cache breaker with this change ... some assets on CDNs and clients may have incorrect CORS headers which can cause stuff to break.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
When plugin spec is evaluated for the first time, it took 30 seconds to run:
```
rm -rf tmp/* && LOAD_PLUGINS=1 be rspec ./plugins/discourse-solved/spec/requests/topics_controller_spec.rb
```
Applying sprocket patch in test environment solves that issue
On forums with a large amount of posts when a user had a bookmark in the topic, PostgreSQL was using an inefficient query plan to fetch the first post of the topic. When running this ActiveRecord query:
```
topic.posts.with_deleted.where(post_number: 1).first
```
The following query plan was produced:
```
Limit (cost=0.43..583.49 rows=1 width=891) (actual time=3850.515..3850.515 rows=1 loops=1)
-> Index Scan using posts_pkey on posts (cost=0.43..391231.51 rows=671 width=891) (actual time=3850.514..3850.514
rows=1 loops=1)
Filter: ((topic_id = 160918) AND (post_number = 1))
Rows Removed by Filter: 2274520
Planning time: 0.200 ms
Execution time: 3850.559 ms
(6 rows)
```
The issue here is the combination of ORDER BY and LIMIT causing the ineficcient Index Scan using posts_pkey on posts to be used. When we correct the AR call to this:
```
topic.posts.with_deleted.find_by(post_number: 1)
```
We end up with a query that still has a LIMIT but no ORDER BY, which in turn creates a much more efficient query plan:
```
Limit (cost=0.43..1.44 rows=1 width=891) (actual time=0.033..0.034 rows=1 loops=1)
-> Index Scan using index_posts_on_topic_id_and_post_number on posts (cost=0.43..678.82 rows=671 width=891) (actua
l time=0.033..0.033 rows=1 loops=1)
Index Cond: ((topic_id = 160918) AND (post_number = 1))
Planning time: 0.167 ms
Execution time: 0.072 ms
(5 rows)
```
This query plan uses the correct index, `Index Scan using index_posts_on_topic_id_and_post_number on posts`. Note that this is only a problem on forums with a larger amount of posts; tiny forums would not notice the difference. On large forums a query for a topic that takes 1s without a bookmark can take 8-30 seconds, and even end up with 502 errors from nginx.
* FEATURE - Add SiteSettings to control JPEG image quality
`recompress_original_jpg_quality` - the maximum quality of a newly
uploaded file.
`image_preview_jpg_quality` - the maximum quality of OptimizedImages
* FEATURE: allow category group moderators to edit posts
If the `enable_category_group_moderation` SiteSetting is enabled, posts should be editable by those belonging to the appropraite groups.
Previously if a onebox timed out we would not present the users in the log
with any information regarding the onebox. This makes it very difficult to
debug.
This adds url/topic/user in the debugging output.
`max-width: 50%; max-height: 400px;` is a good fallback, however, if width and height are given and are smaller than fallback - we should persist that smaller size.
Our Email::Sender class accepts an optional user argument, which is used to create a PostReplyKey record when present. This record is used to sub out the %{reply_key} placeholder in the Reply-To mail header, so if we do not pass in the user we get a broken Reply-To header.
This is especially problematic in the IMAP group SMTP situation, because these emails go to customers that we are replying to, and when they reply to us the email bounces! This fixes the issue by passing user to the Email::Sender when sending a group_smtp email but there is still more to do in another PR.
This Email::Sender optional user is a bit of a footgun IMO, especially because most of the time we use it there is a user we can source. I would like to do another PR for this after this one to make the parameter not optional, so we don't end up with these reply issues down the line again.
This was made adjustable to allow rolling back quickly if problems came
up. The new behaviour was made default in 93137066 and no problems with
this have been reported.
This consolidates logic used to match routes in ApiKey, UserApiKey and DefaultCurrentUserProvider. This reduces duplicated logic, and will allow UserApiKeysScope to easily re-use the parameter matching logic from ApiKeyScope
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
It pauses Sidekiq, clears Redis (namespaced to the current site), clears Sidekiq jobs for the current site, restores the database and unpauses Sidekiq. Previously it stayed paused until the end of the restore.
Redis is cleared because we don't want any old data lying around (e.g. old Sidekiq jobs). Most data in Redis is prefixed with the name of the multisite, but Sidekiq jobs in a multisite are all stored in the same keys. So, deleting those jobs requires a little bit more logic.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
Limit git log output to the first line of the commit message
when generating the list of commits in a release. Some commit messages
are including the names of all commits that were squashed, resulting
in duplicate and confusing lines in the release notes.
discourse-perspective-api was not successfully running tests via the
qunit:test rake task due to inconsistent naming between core and the
repo. As a result we no longer need the mapping in the plugin rake task, too.
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
Per Google, sites are encouraged to upgrade from `analytics.js` to `gtag.js` for Google Analytics tracking. This commit updates core Discourse to use the new `gtag.js` API Google is asking sites to use. This API has feature parity with `analytics.js` but does not use trackers.
Creates a BabelHelper builder using a default list of plugins, to ensure the transpiled code is always using the same plugins instead of differents plugins in different cases.
When the server gets overloaded and lots of requests start queuing server
will attempt to shed load by returning 429 errors on background requests.
The client can flag a request as background by setting the header:
`Discourse-Background` to `true`
Out-of-the-box we shed load when the queue time goes above 0.5 seconds.
The only request we shed at the moment is the request to load up a new post
when someone posts to a topic.
We can extend this as we go with a more general pattern on the client.
Previous to this change, rate limiting would "break" the post stream which
would make suggested topics vanish and users would have to scroll the page
to see more posts in the topic.
Server needs this protection for cases where tons of clients are navigated
to a topic and a new post is made. This can lead to a self inflicted denial
of service if enough clients are viewing the topic.
Due to the internal security design of Discourse it is hard for a large
number of clients to share a channel where we would pass the full post body
via the message bus.
It also renames (and deprecates) triggerNewPostInStream to triggerNewPostsInStream
This allows us to load a batch of new posts cleanly, so the controller can
keep track of a backlog
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Previously, any errors in those files would e.g. blow up the update process in docker_manager.
Now it prints out an error and proceeds as if there was no compatibility file.
Includes:
* DEV: Extract setup_git_repo
* DEV: Use `Dir.mktmpdir`
* DEV: Default to `main` branch (The latest versions of git already do this, so to avoid problems do this by default)
* FIX: second factor cannot be enabled if SSO is enabled
If `enable_sso` setting is enabled then admin should not be able to
enable `enforce_second_factor` setting as that will lock users out.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
We can't use erb in Ember CLI (since it does not have Ruby) so this has
been ported to use our `javascript:update_constants` rake test instead.
Note we don't have to run this every time a notification type as it's
only used by fixtures to fill in some specific types we test against.
See https://meta.discourse.org/t/email-address-change-confirmation-email-not-sent-but-every-other-notification-emails-are/165358
In short: with disable emails set to non-staff, email address change confirmation emails (those sent to the new address) are not sent for staff or admin members.
This was happening because we were looking up the staff user with the to_address of the email, but the to address was the new email address because we are sending a confirm email change email, and thus the user could not be found. We didn't need to do this anyway because we are passing the user into the Email::Sender class anyway.
* PERF: avoid lookbehinds when indexing search
Previously we used a `EmailCook.url_regexp` this regex used lookbehinds
Unfortunately certain strings could lead to pathological behavior causing
CPU to skyrocket and regex replace to take a very very long time.
EmailCook still needs a fix, but it is less urgent cause it already splits
to single lines. That said we will correct that as well in a seperate PR.
New implementation is far more naive and relies on the extra spaces search
indexer inserts.
When that site setting is enabled, the category counts (new/unread)
include the subcategory definition topics, but the topics aren't included
in the list. This fixes that discrepancy.
This plugin is only useful for developers, however, making it core allows us to centralize any component modification in one commit.
This integration also adds a new site_setting: `styleguide_admin_only` which allows to enable a styleguide on a live site while restricting visibility to admins only.
By default, styleguide is disabled.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
Allows site administrators to pick different fonts for headings in the wizard and in their site settings. Also correctly displays the header logos in wizard previews.
When enable_personal_messages was disabled, moderators could not see
the private messages for the "moderators" group. The link was displayed
on the client side, but the checks on the server side did not allow it.
This is where they should be as far as ember is concerned. Note this is
a huge commit and we should be really careful everything continues to
work properly.
UploadRecovery only worked on missing Upload records. Now it also works with existing ones that have an invalid_etag status.
The specs (first that test the S3 path) are a bit of stub-a-palooza, but that's how much this class interacts with the the outside world. 🤷♂️
Upload.secure_media_url? raised an exceptions when the URL was invalid,
which was a issue in some situations where secure media URLs must be
removed.
For example, sending digests used PrettyText.strip_secure_media,
which used Upload.secure_media_url? to replace secure media with
placeholders. If the URL was invalid, then an exception would be raised
and left unhandled.
Now instead in UrlHelper.rails_route_from_url we return nil if there is something wrong with the URL.
Co-authored-by: Bianca Nenciu <nenciu.bianca@gmail.com>
The download link on the lightbox for images was not downloading the image if the upload was marked secure, because the code in the upload controller route was not respecting the dl=1 param for force download.
This PR fixes this so the download link works for secure images as well as regular ligthboxed images.
See https://meta.discourse.org/t/changing-a-users-email/164512 for context.
When admin changes an email for a user, we were incorrectly sending the password reset email to the user's old address. Also the new email does not come into effect until the reset password process is done, so this PR adds some notes to the admin to make this clearer.
Use the names as provided by discourse-fonts and remove the
translated strings.
It also ensures that the selected font is present in case a font will
be removed in the future.
This is a little bit of refactoring. Core Discourse should have default promotion message for TL2.
In addition, when the Discobot plugin is enabled, the user is invited to advanced training
Since 9e4ed03, moderators can view groups with visibility level set to "Group owners, members and moderators".
This fixes an issue where moderators can see the group in /g but then get a 404 when clicking on individual groups.
To check if a post contains any embedded media, we look if the "image_sizes" attribute is present in the new post manager arguments.
We want to see one boxed links, but we only store the raw content of the post. To work around this, I extracted the onebox logic from the composer editor into a module.
With secure media and the UploadSecurity class, we need a nice way for plugins to register custom upload types that should be considered public and never secure.
This is intended for use by plugins which are building their own topic lists, and want to include PMs alongside regular topics (e.g. discourse-assign). It does not get used directly in core.
* DEV - versions of JS files written to a JS file to be included by load-script and appended as params to URLs
* Formatting
* Incorporate feedback from PR
* Update filename of public-js-versions
Editing a post didn't update the `post_uploads` right away. Instead it relied on the `CookedPostProcessor`. This can lead to an inconsistent state if uploads are added or removed during an edit and, for some reason, the `ProcessPost` job doesn't run (successfully). This inconsistency leads to missing uploads, because the newly added uploads appear to be unused and will be deleted by the `CleanUpUploads` job. In addition to that, uploads, which got removed during the edit, appear to be still in use and won't be deleted by the background job.
This commit ensures that the `post_uploads` are updated during the edit without relying on a background job.
In some cases Discourse admins may opt for sessions not to persist when a
browser is closed.
This is particularly useful in healthcare and education settings where
computers are shared among multiple workers.
By default `persistent_sessions` site setting is enabled, to opt out you
must disable the site setting.
After restoring a backup it takes up to 48 hours for uploads stored on S3 to appear in the S3 inventory. This change prevents alerts about missing uploads by preventing the EnsureS3UploadsExistence job from running in the first 48 hours after a restore. During the restore it deletes the count of missing uploads from the PluginStore, so that an alert isn't triggered by an old number.
We must guarantee that "rel=noopener" was set if "target=_blank" is present, which is not always the case for trusted users. Also, if the link contains the "nofollow" attribute, it has to have the "ugc" attribute as well.
In c6ceda8c, a bug was introduced where an admin searching for his own
private messages will actually end up searching through all private
messages on the site.
Follow-up to c6ceda8c4e
This PR introduces a few important changes to secure media redaction in emails. First of all, two new site settings have been introduced:
* `secure_media_allow_embed_images_in_emails`: If enabled we will embed secure images in emails instead of redacting them.
* `secure_media_max_email_embed_image_size_kb`: The cap to the size of the secure image we will embed, defaulting to 1mb, so the email does not become too big. Max is 10mb. Works in tandem with `email_total_attachment_size_limit_kb`.
`Email::Sender` will now attach images to the email based on these settings. The sender will also call `inline_secure_images` in `Email::Styles` after secure media is redacted and attachments are added to replace redaction messages with attached images. I went with attachment and `cid` URLs because base64 image support is _still_ flaky in email clients.
All redaction of secure media is now handled in `Email::Styles` and calls out to `PrettyText.strip_secure_media` to do the actual stripping and replacing with placeholders. `app/mailers/group_smtp_mailer.rb` and `app/mailers/user_notifications.rb` no longer do any stripping because they are earlier in the pipeline than `Email::Styles`.
Finally the redaction notice has been restyled and includes a link to the media that the user can click, which will show it to them if they have the necessary permissions.
- Lets child components extend color definitions
- Includes default theme color definitions
- Fails gracefully on color stylesheet SCSS errors
- Includes theme variables when extending colors
This PR ensures that new bookmarks cannot be created for deleted posts and topics, and also makes sure that if a bookmark was created and then the topic deleted that the show topic page does not error from trying to retrieve the bookmark reminder at.
Adding these classes to the stylesheet link elements in order to toggle dark/light schemes via this theme-component. Eventually this theme-component could possible be merged into core.
DEV: add plugin hooks for silence message parameters
Allows plugins to add, and update extra silence message params for custom
i18n vars
Allows plugins to override system messages via `message_title` and
`message_raw` parameters. We can later expose these params where necessary via event
hooks. Expose the parameter for the on user_silenced trigger.
* DEV: Switch our fast_xor gem for xorcist
We use the `xor` function as part of password hashing and we want to use
a faster version than the native ruby xor'ing feature so we use a gem
for this.
fast_xor has been abandoned, and xorcist fixed our initial holdup for
switching in https://github.com/fny/xorcist/issues/4
xorcist also has jruby support so we can remove our jruby fallback
logic.
* Move using statement inside of class
