cf. e62e93f83a
This PR also makes it so `bot` (negative ID) and `system` users are always allowed
to send PMs, since the old conditional was just based on `enable_personal_messages`
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
When we build and send emails using MessageBuilder and Email::Sender
we add custom headers defined in SiteSetting.email_custom_headers.
However this was causing errors in cases where the custom headers
defined a header that we already specify in outbound emails (e.g.
the Precedence: list header for topic/post emails).
This commit makes it so we always use the header value defined in Discourse
core if there is a duplicate, discarding the custom header value
from the site setting.
cf. https://meta.discourse.org/t/email-notifications-fail-if-duplicate-headers-exist/222960/14
This PR enables custom email dark mode styles by default that were added here.
There is currently poor support for dark mode queries in mail clients. The main beneficiary of these changes will be Apple Mail and Outlook.
Enjoy the darkness 🕶️
Previously we only supported a single 'required tag group' for a category. This commit allows admins to specify multiple required tag groups, each with their own minimum tag count.
A new category_required_tag_groups database table replaces the existing columns on the categories table. Data is automatically migrated.
Tags (and tag groups) can be configured so that they can only be used in specific categories and (optionally) restrict topics in these categories to be able to add/use only these tags. These restrictions work as expected when a topic is created without going through the review queue; however, if the topic has to be reviewed by a moderator then these restrictions currently aren't checked before the topic is sent to the review queue, but they're checked later when a moderator tries to approve the topic. This is because if a user manages to submit a topic that doesn't meet the restrictions, moderators won't be able to approve and it'll be stuck in the review queue.
This PR prevents topics that don't meet the tags requirements from being sent to the review queue and shows the poster an error message that indicates which tags that cannot be used.
Internal ticket: t60562.
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
Our discourse_public_exceptions middleware is designed to catch bubbled exceptions from lower in the stack, and then use `ApplicationController.rescue_with_handler` to render an appropriate error response.
When the request itself is invalid, we had an escape-hatch to skip re-dispatching the request to ApplicationController. However, it was possible to work around this by 'layering' the errors. For example, if you made a request which resulted in a 404, but **also** had some other invalidity, the escape hatch would not be triggered.
This commit ensures that these kind of 'layered' errors are properly handled, without logging warnings. It also adds detection for invalid JSON bodies and badly-formed multipart requests.
The user-facing behavior is unchanged. This commit simply prevents warnings being logged for invalid requests.
When redirecting to login, we store a destination_url cookie, which the user is then redirected to after login. We never want the user to be redirected to a JSON URL. Instead, we should return a 403 in these situations.
This should also be much less confusing for API consumers - a 403 is a better representation than a 302.
This only affects multisite Discourse instances (where multiple forums are served from a single application server). The vast majority of self-hosted Discourse forums do not fall into this category.
On affected instances, this vulnerability could allow encrypted session cookies to be re-used between sites served by the same application instance.
This commit adds the RailsMultisite middleware in test mode when Rails.configuration.multisite is true. This allows for much more realistic integration testing. The `multisite_spec.rb` file is rewritten to avoid needing to simulate a middleware stack.
Mixing multisite and standard specs can lead to issues (e.g. when using `fab!`)
Disabled the (upcoming https://github.com/discourse/rubocop-discourse/pull/11) rubocop rule for two files that have thoroughly tangled both types of specs.
Fixes `Rack::Lint::LintError: a header value must be a String, but the value of 'Retry-After' is a Integer`. (see: 14a236b4f0/lib/rack/lint.rb (L676))
I found it when I got flooded by those warning a while back in a test-related accident 😉 (ember CLI tests were hitting a local rails server at a fast rate)
Previously when inheriting category auto-close settings for a topic, those settings were disrupted if another topic timer was assigned or if a topic was closed then manually re-opened.
This PR makes it so that when a topic is manually re-opened the topic auto-close settings are inherited from the category. However, they will now be based on the topic created_at date. As an example, for a topic with a category auto close hours setting of 72 (3 days):
* Topic was created on 2021-02-15 08:00
* Topic was closed on 2021-02-16 10:00
* Topic was opened again on 2021-02-17 06:00
Now, the topic will inherit the auto close timer again and will close automatically at **2021-02-18 08:00**, which is based on the creation date. If the current date and time is greater than the original auto-close time (e.g. we were at 2021-02-20 13:45) then no auto-close timer is created.
Note, this will not happen if the topic category auto-close setting is "based on last post".
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
* PERF: we don't need to use a huge image to test thumbnails
Generating images with 5000x5000 dimensions is an expensive operation.
Using smaller images reduce the time of model spec from 11s to 3s and integration spec from 6s to 2s.
"en_US" doesn't contain most of the translations, so it falls back to "en". But that behavior stopped translation overrides to work for pluralized strings in "en_US", because it relies on existing translations. This fixes it by looking up the existing translation in all fallback locales.
In 1bd8a075, a hidden site setting was added that causes Email::Styles
to treat its input as a complete document in all cases.
This commit enables that setting by default.
Some tests were removed that were broken by this change. They tested the
behaviour of applying email styles to empty strings. They weren't useful
because:
* Sending empty email is not something we ever intend to do,
* They were testing incidental behaviour - there are lots of
valid ways to process the empty string,
* Their intent wasn't clear from their descriptions,
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
This refactors default_current_user_provider in a few ways:
- Introduce a generic `api_parameter_allowed?` method which checks for whitelisted routes/formats
- Only read the api_key parameter on allowed routes. It is now completely ignored on other routes (previously it would raise a 403)
- Start reading user_api_key parameter on allowed routes
- Refactor tests as end-end integration tests
A plugin API for PARAMETER_API_PATTERNS will be added soon
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
