Over the years we have found that a few communities never discovered tags.
Instead of having them default off we now have them default on, ensuring
that everyone finds out about them.
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
In Ember CLI addons get put into the vendor bundle, as opposed to their
own bundle like we're doing in the Rails app. We never use pretty-text
without our vendor bundle so this should have no difference on
performance.
We need to keep the pretty-text bundle for server side cooking.
It used to require SiteSetting.min_trust_level_to_allow_invite to
invite a user to a group, even if the user existed and the inviter was
a group owner.
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
Some specs failed when `LOAD_PLUGINS=1` was set while migrating the test DB and the narrative-bot plugin disabled the `send_welcome_message` site setting.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
We need to be careful when stubbing this method. SessionController#become won't be defined if production is set to true, so if these tests run first, calling #sign_in will fail for other tests.
Calling sign_in before stubbing guarantees the method is defined because the check happens when the class is loaded.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
When editing the first post for the topic we do two AJAX requests
to two separate controllers in this order:
PUT /t/topic-name
PUT /posts/2489523
This causes two post revisor calls, which end up triggering the
:post_edited DiscourseEvent twice. This is then picked up and sent
as a WebHook event twice. However we do not need to send a :post_edited
webhook event if the first post is being edited and topic_changed is
true from the :post_edited DiscourseEvent, because a second event will
shortly come through for just the post.
See https://meta.discourse.org/t/post-webhook-fires-two-times-on-post-edited-for-first-post-in-a-topic/162408
Continued on from https://github.com/discourse/discourse/pull/10590
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
* FIX: flaky specs after topic view custom filters
When ensuring TopicView class variables return to the original state it should use empty Hash instead of empty Array. That
https://github.com/discourse/discourse/blob/master/lib/topic_view.rb#L60
* FIX: convert to string for topic view custom filter
Some emails coming in via the mail receiver can still end up
with bad encoding when trying to enqueue the job. This catches
the last encoding issue and forces iso-8559-1 and encodes to
UTF-8 to circumvent the issue.
Currently, when the target is not available we're returning the error message "`You are not permitted to view the requested resource`" which is not clear.
We have found when receiving and posting inbound emails to the handle_mail route, it is better to POST the payload as a base64 encoded string to avoid strange encoding issues. This introduces a new param of `email_encoded` and maintains the legacy param of email, showing a deprecation warning. Eventually the old param of `email` will be dropped and the new one `email_encoded` will be the only way to handle_mail.
Uncategorized was sometimes visible even if allow_uncategorized_topics
was false. This was especially happening on mobile, if at least one
topic was uncategorized.
* FEATURE: Small improvements to the topic list embed
- Ability to wrap the list in a custom class so you can styles different
lists using specific CSS
- Adds a topic link to the thumbnail when using the complete template
* FIX: Be more strict about allowed chars in class name
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
If the "use_site_small_logo_as_system_avatar" setting is enabled, the site's small logo is displayed as the selected option by the avatar-selector. Choosing a different avatar disables the setting.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
Rails 6.1.3.1 deprecates a few API and has some internal changes that break our tests suite, so this commit fixes all the deprecations and errors and now Discourse should be fully compatible with Rails 6.1.3.1. We also have a new release of the rails_failover gem that's compatible with Rails 6.1.3.1.
The server used to respond with a generic 'error, contact admin' message
which did not offer any hint what the error was. This happened even when
the error could be easily corrected by the user (for example, if they
chose a very common password).
When invited by email, users will receive an invite URL which contains
a token. If that token is present when the invite is redeemed, their
account will be automatically activated.
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
This makes behavior consistent with documentation:
API:
> Will send an email with this message when present
Web UI:
> Optionally, provide more information about the suspension and it will be emailed to the user
