* Simplify config nav link generation to always inject the Settings
tab
* Auto-redirect to the first non-settings config link (if there is one)
when the user lands on /admin/plugins/:plugin_id
* Add `extras` to admin plugin serializer so plugins can add more
data on first load
* Add PikadayCalendar page object for system specs, extracted from the
CalendarDateTimePicker to make it more generic.
Those were all low hanging fruits - all were already glimmer components, so this was mostly merging js and hbs files and adding imports.
(occasionally also adds/fixes class names)
At the moment, there is no way to create a group of related watched words together. If a user needed a set of words to be created together, they'll have to create them individually one at a time.
This change attempts to allow related watched words to be created as a group. The idea here is to have a list of words be tied together via a common `WatchedWordGroup` record. Given a list of words, a `WatchedWordGroup` record is created and assigned to each `WatchedWord` record. The existing WatchedWord creation behaviour remains largely unchanged.
Co-authored-by: Selase Krakani <skrakani@gmail.com>
Co-authored-by: Martin Brennan <martin@discourse.org>
Fixes two issues:
- frontend was reloading the page when clicking-to-remove avatar
- backend wasn't allowing resetting the setting by deleting all avatars
When the user sees no results in their admin sidebar query,
we are adding two additional links:
* "Search site settings" - Navigates to the site settings page
with the filter prefilled in the search
* "Admin user list" - Navigates to the user list with the filter
prefilled in the username search
This will bridge the gap until we have a full admin-wide search.
Also make admin site setting search param refresh on filter changes
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This commit ensures that additional keywords for admin
sidebar links (which are also stored in the admin sidebar state
manager) are translated with I18n, which was discussed
in https://meta.discourse.org/t/introducing-experimental-admin-sidebar-navigation/289281/58?u=martin
This also changes the admin sidebar state manager keywords to
not be a TrackedObject -- this is not necessary as keywords are
only set once, and it was causing rendering issues because
the keywords were being set at the same time they were read.
Finally this adds a "theme" keyword to the "Components" link
because we often refer to components as Theme Components
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Automatically add `moderators` and `admins` auto groups to specific site settings.
In the new group-based permissions systems, we just want to check the user’s groups since it more accurately reflects reality
Affected settings:
- tag_topic_allowed_groups
- create_tag_allowed_groups
- send_email_messages_allowed_groups
- personal_message_enabled_groups
- here_mention_allowed_groups
- approve_unless_allowed_groups
- approve_new_topics_unless_allowed_groups
- skip_review_media_groups
- email_in_allowed_groups
- create_topic_allowed_groups
- edit_wiki_post_allowed_groups
- edit_post_allowed_groups
- self_wiki_allowed_groups
- flag_post_allowed_groups
- post_links_allowed_groups
- embedded_media_post_allowed_groups
- profile_background_allowed_groups
- user_card_background_allowed_groups
- invite_allowed_groups
- ignore_allowed_groups
- user_api_key_allowed_groups
To add a components link to the sidebar refactoring was required to create unique URLs for themes and components. Before the query param was used. After changes, we have two URLs `/admin/customize/themes` and `/admin/customize/components`.
Include categories when fetching admin/web_hooks and make
'extras' more useful. 'extras' is the mechanism we use to provide
context for rest objects.
However, previously:
* When you fetched many objects, extras was only set on the ResultSet,
not on each object,
* If you need derived data from extras, there wasn't a sensible place to
put this code. Now, you can create an 'ExtrasClass' static field on
your rest model and this class will be used for your extras data,
This commit changes the identifier displayed in the navigation tree of
the theme objects editor from the generic "category 1" to "<category
name>, <category 2 name>" when a property of typed categories is set as
the identifier.
Example:
For the following theme objects schema:
```
some_setting:
type: objects
default: []
schema:
name: <some scheme name>
identifier: list_of_categories
properties:
list_of_categories:
type: categories
```
If the `list_of_categories` property's value has been set to `category
1` and `category 2`, the navigation tree will display `category 1,
category 2` as the text to represent the object in the navigation tree.
This commit changes enum typed theme objects property to be optional.
Previously, an enum typed property is always required but we have found
that this might not be ideal so we want to change it.
Why this change?
For a `typed: objects` theme setting with an enum property, we are
adding a `default` key for `type: enum` fields which will be used
as the default value on the client side.
```
some_objects_setting:
type: objects
schema:
name: field
properties:
enum_field:
type: enum
default: awesome
choices:
- nice
- cool
- awesome
```
Why this change?
Prior to this change, the input fields were not displaying when adding
an object to a objects typed theme setting which has a default value of
`[]`. This is because the `fields` getter was not being recomputed.
Why this change?
Instead of dealing with a generic object for `Theme#settings`, we want
to always be dealing with `ThemeSettings` objects.` Previously, we
converted the generic objects to `ThemeSettings` objects in the theme's
adapter `afterFindAll` function. This is not correct because updating
or saving the theme individual reverted the `Theme#settings` back to an
array of generic object.
To fix this problem, the proper way with our REST models is to overwrite
the static `munge` method and create `ThemeSettings` instances there.
In this PR, all references in the UI to the word "`upgrade`" are changed to "`update`". This is to differentiate the update process in self-hosted sites from the plan "upgrade" process in hosted sites.
Follow-up to the PR: https://github.com/discourse/docker_manager/pull/208
Why this change?
Before this change, the validation error message shown to the user when
saving a theme objects setting is very cryptic. This commit changes the
validation error messages to be displayed on top of the editor instead.
Note that I don't think this way of displaying is the ideal state we
want to get to but given the time we have this will do for now.
Why this change?
In the categories, groups and tags selectors, we were showing a
validation error message when a property that is not required but
has a min validation is empty. In this case, we should not be displaying
the min validation error message because the property is allowed to be
empty.
Why this change?
When adding a new object, we want to switch to the input fields of the
new object instead of just appending the new object to the list of
objects as we believe this is a better UX flow.
Why this change?
The field components to select categories, groups and tags had quite a
bit of logic duplicated between them. This commit refactors the logic
to remove most of the duplication so that we can introduce changes
without having to make the changes in multiple places.
... rather than just the category id.
In order for the user to have selected a category, the category must
have been loaded and it's useful for the category chooser to provide
this fetched category so that it doesn't need to be refetched.
In the future, it would be better to store the categories that the
chooser knows about in local component state, so that the category
doesn't need to be fetched from the id map, but this, at least, puts the
API in place.
Why this change?
This is a follow-up to 86b2e3a.
Basically, we want to allow people to select more than 1 group as well.
What does this change do?
1. Change `type: group` to `type: groups` and support `min` and `max`
validations for `type: groups`.
2. Fix the `<SchemaThemeSetting::Types::Groups>` component to support the
`min` and `max` validations and switch it to use the `<GroupChooser>` component
instead of the `<ComboBoxComponent>` component which previously only supported
selecting a single group.
Why this change?
Prior to this change, the `SchemaThemeSetting::Editor#tree` was creating a
new `Tree` instance which holds instances of `Node`. Both classes
consisted of tracked properties. The problem with this approach is that
when any tracked properties is updated, Ember will revaluate
`SchemaThemeSetting::Editor#tree` and because that method always return
a new instance of `Tree`, it causes the whole navigation tree to
rerender just because on tracked property changed.
This rerendering of the whole navigation tree every time made it hard to
implement simple features like hiding a section in
9baa820d53. Instead of being able to just
declare a tracked property to hide/show a section, we end up with a more
complicated solution.
This commit rewrites `SchemaThemeSetting::Editor` to depend on Ember
components to form the tree structure instead. As needed, each component
in the tree structure can declare its own tracked property as necessary.
Why this change?
In cdba864598, we added support for adding
a description which will be displayed under the input of each property
on the client side.
Currently this convention in the locale file is followed:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name: <description for the name property>
links:
name: <description for the name property in link>
url: <description for the url property in link>
```
Since we now want to allow the label to be translated as well, we will
be changing the convention to the following:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name:
label: <label for the name property>
description: <description for the name property>
links:
name:
label: <label for the name property>
description: <description for the name property in link>
url:
label: <label for the url property>
description: <description for the url property in link>
```
If the locale file does not provide a `label` key under the property's
name, the client side will just display the property's name as the
label for the input field.
Descriptions for the `category-list`, `file-size-restriction` and `file-types-list` site/theme settings aren't rendered due to a bug that was introduced when those components were migrated to Glimmer components. This commit fixes the bug which is that arguments passed to .gjs components should be accessed as `@argument` and not `this.arugment` inside the `<template>` tag.
Why this change?
This is a follow-up to 86b2e3aa3e.
Basically, we want to allow people to select more than 1 category as well.
What does this change do?
1. Change `type: category` to `type: categories` and support `min` and `max`
validations for `type: categories`.
2. Fix the `<SchemaThemeSetting::Types::Categories>` component to support the
`min` and `max` validations and switch it to use the `<CategorySelector>` component
instead of the `<CategoryChooser>` component which only supports selecting one category.
Why this change?
Previously, we were preloading the necessary metadata for
`adminCustomizeThemes.show.schema` route in the
`adminCustomizeThemes.show` route. This is wasteful because we're
loading data upfront when the objects setting editor may not be used.
This change also lays the ground work for a future commit where we need
to be shipping down additional metadata which may further add to the
payload.
Why this change?
When a property of `type: tags` is required, we should be displaying the
"at least 1 tag is required" validation error message when there are no
tags selected in the `TagChooser` compoment. However, we were passing
`this.min` as the `count` attribute when generating the translation
string which is incorrect as `this.min` is not always set.
Why this change?
While working on the tag selector for the theme object editor, I
realised that there is an extremely high possibility that users might want to select
more than one tag. By supporting the ability to select more than one
tag, it also means that we get support for a single tag for free as
well.
What does this change do?
1. Change `type: tag` to `type: tags` and support `min` and `max`
validations for `type: tags`.
2. Fix the `<SchemaThemeSetting::Types::Tags>` component to support the
`min` and `max` validations
Why this change?
Prior to this change, the category selector was not clearable and did
not allow a none value. This is incorrect as the category selector
should be clearable and should allow a none value when the property is
not required.
Why this change?
Prior to this change, the group selector was using the `<GroupChooser>`
component which is a `<MultiSelectComponent>` and is not ideal in our
situation when we only allow a single group to be selected.
The other problem is that we are doing an async load of the groups when
it is already loaded and available in the `Site` service.
Why this change?
This is a continuation of a30d73f255
In our schema, we support the `min` and `max` validation
rules like so:
```
some_objects_setting
type: objects
schema:
name: some_object
properties:
id:
type: float
validations:
min: 5
max: 10
```
While the validations used to validate the objects on the server side,
we should also add client side validation for better UX.
What does this change do?
Since the integer and float input fields share very very similar logic
in the component. This commit pulls the common logic into
`admin/components/schema-theme-setting/number-field.gjs` which
`admin/components/schema-theme-setting/types/integer.gjs` and `admin/components/schema-theme-setting/types/float.gjs`
will inherit from.
Why this change?
This is a continuation of 8de869630f.
In our schema, we support the `min` and `max` validation
rules like so:
```
some_objects_setting
type: objects
schema:
name: some_object
properties:
id:
type: integer
validations:
min: 5
max: 10
```
While the validations used to validate the objects on the server side,
we should also add client side validation for better UX.
Why this change?
In our schema, we support the `min_length` and `max_length` validation
rules like so:
```
some_objects_setting
type: objects
schema:
name: some_object
properties:
title:
type: string
validations:
min_length: 1
max_length: 10
```
While the validations used to validate the objects on the server side,
we should also add client side validation for better UX.
This commit changes the API for registering the plugin config
page nav configuration from a server-side to a JS one;
there is no need for it to be server-side.
It also makes some changes to allow for 2 different ways of displaying
navigation for plugin pages, depending on complexity:
* TOP - This is the best mode for simple plugins without a lot of different
custom configuration pages, and it reuses the grey horizontal nav bar
already used for admins.
* SIDEBAR - This is better for more complex plugins; likely this won't
be used in the near future, but it's readily available if needed
There is a new AdminPluginConfigNavManager service too to manage which
plugin the admin is actively viewing, otherwise we would have trouble
hiding the main plugin nav for admins when viewing a single plugin.
Why this change?
If an object doesn't have any child objects for a particular property
and we try to add one through the editor, an error will be raised.
```
Cannot read properties of undefined (reading 'push')
at SchemaThemeSettingEditor.addItem (editor.js:190:1)
```
Currently, a new sidebar link for what's new and reports is going to the main dashboard page and activates the proper tab.
It might be problematic, especially, when the instance has a lot of problems. In that case, it would be difficult for admin to find reports or what’s new which is rendered at the bottom of the page.
Therefore separate pages for reports and what's new were created.
Reports were moved to a component that is shared between a separate page and the dashboard.
This commit fixes an issue where the following happens:
1. You open /admin as a member of the admin_sidebar_enabled_groups
1. You then click the chat icon in the header when you prefer to have
drawer open, or if you just minimise chat into drawer after it opens
fullscreen
1. You lose the admin sidebar panel, and are reset instead to the main
panel
Also included is a bit of refactoring to make it so the forcing of
admin sidebar state is in one place.
Why this change?
This is a first pass at styling the editor for creating/editing/updating
an objects typed theme setting. Only the desktop view is being
considered at the current moment.
The objects typed theme setting is still behind a feature flag at this moment so there is no need for us to get the styling perfect. The purpose of this PR is to get us to a state which we can quickly iterate with a designer on.
This commit makes it so the site settings filter controls and
the list of settings input editors themselves can be used elsewhere
in the admin UI outside of /admin/site_settings
This allows us to provide more targeted groups of settings in different
UI areas where it makes sense to provide them, such as on plugin pages.
You could open a single page for a plugin where you can see information
about that plugin, change settings, and configure it with custom UIs
in the one place.
In future we will do this in "config areas" for other parts of the
admin UI.
Why this change?
When editing a objects typed theme setting, the input fields which are
rendered should include a description so that the user knows the purpose
of the field which they are changing.
What does this change do?
This change adds support for adding description to each property in the
schema for an object by following a given convention in the locale file.
For a schema like this:
```
objects_setting:
type: objects
schema:
name: section
properties:
name:
type: string
required: true
links:
type: objects
schema:
name: link
properties:
name:
type: string
required: true
validations:
max_length: 20
url:
type: string
```
Description for each property in the object can be added like so:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name: <description for the name property>
links:
name: <description for the name property in link>
url: <description for the url property in link>
```
If the a description is not present, the input field will simply not
have an description.
Also note that a description for a theme setting can now be added like
so:
```
en:
theme_metadata:
settings:
some_other_setting: <This will be used as the description>
objects_setting:
description: <This will also be used as the description>
```
With the new admin sidebar restructure, we have a link to "Installed plugins". We would like to ensure that when the admin is searching for a plugin name like "akismet" or "automation" this link will be visible. Also when entering the plugins page, related plugins should be highlighted.
Why this change?
Prior to this change, there is no description being displayed for
objects typed theme setting because we were rendering a button instead
of the components for the various setting types which will render the
setting's description.
What does this change do?
1. Introduce `SiteSettings::Description` compoment to centralise the HTML
being rendered across all settings component.
2. Renders the `SiteSettings::Description` component after the edit
button in `site_setting.hbs`.
This commit adds new plugin show routes (`/admin/plugins/:plugin_id`) as we move
towards every plugin having a consistent UI/landing page.
As part of this, we are introducing a consistent way for plugins
to show an inner sidebar in their config page, via a new plugin
API `register_admin_config_nav_routes`
This accepts an array of links with a label/text, and an
ember route. Once this commit is merged we can start the process
of conforming other plugins to follow this pattern, as well
as supporting a single-page version of this for simpler plugins
that don't require an inner sidebar.
Part of /t/122841 internally
Why this change?
On the `/admin/customize/themes/<:id>` route, we allow admins to edit
all settings via a settings editor. Prior to this change, trying to edit
and save a typed objects theme settings will result in an error on the
server.
Why this change?
On a slow network, using the `AceEditor` component will result in a blob
of text being shown first before being swapped out with the `ace.js`
editor after it has completed loading.
There is also a problem when setting the theme for the editor which
would result in a "flash" as reported in
https://github.com/ajaxorg/ace/issues/3286. To avoid this, we need to
load the theme js file before displaying the editor.
What does this change do?
1. Adds a loading spinner and set the `div.ace` with a `.hidden` class.
2. Once all the relevant scripts and initialization is done, we will
then remove the loading spinner and remove `div.ace`.
Why this change?
The `/admin/customize/themes/:id/schema/name` route is a work in
progress but we want to be able to start navigating to it from the
`/admin/customize/themes/:id` route.
What does this change do?
1. Move `adminCustomizeThemes.schema` to a child route of
`adminCustomizeThemes.show`. This is because we need the model
from the parent route and if it isn't a child route we end up
having to load the theme model again from the server.
1. Add the `objects_schema` attribute to `ThemeSettingsSerializer`
1. Refactor `SiteSettingComponent` to be able to render a button
so that we don't have to hardcode the button rendering into the
`SiteSettings::String` component
Adds a site setting to include a post's content in penalty message.
When silencing/suspending a user from a post, or a reviewable with
a post, adds an option to include a post's content in the email
message by default.
With the adjustments of `btn-transparent` in https://github.com/discourse/discourse/pull/24666, there are more buttons that could use this class instead of `btn-flat`. This mostly relates to `x` close buttons, but also includes composer and chat toggles.
The primary difference between these styles is that `btn-transparent` never has a background, where `btn-flat` may have a hover or focus background.
In this PR, the admin panel remembers the previous state and restores it when the admin panel is deactivated.
https://github.com/discourse/discourse/pull/25781
However, it would be better to have a more generic solution. When the panel is changed, the previous state is saved in the sidebarState. When a user returns to the specific panel, a previously remembered state is restored.
Continue from https://github.com/discourse/discourse/pull/25673.
This commit starts building the inputs pane of schema theme settings. At the moment only string fields are rendered, but more types will be added in future commits.
This commit adds a loading spinner when installing a theme as sometimes
installing a theme can take quite a bit of time this way we have some
indication that things are still working as the theme is being
installed.
We have separated and combined modes for sidebar panels.
Separated means the panels show only their own sections,
combined means sections from all panels are shown.
The admin sidebar only shows its own panels, so it must set
the mode to separated; however when we navigate to chat or
home we must revert to the initial mode setttings.
Affects the following settings:
delete_all_posts_and_topics_allowed_groups
experimental_new_new_view_groups
enable_experimental_admin_ui_groups
custom_summarization_allowed_groups
pm_tags_allowed_for_groups
chat_allowed_groups
direct_message_enabled_groups
chat_message_flag_allowed_groups
This turns off client: true for these group-based settings,
because there is no guarantee that the current user gets all
their group memberships serialized to the client. Better to check
server-side first.
This commit is the first of a series of commits that will allow themes to define complex settings types by declaring a schema of the setting structure that Discourse core will use to build a UI for the setting automatically. We implement the navigation logic and support for multiple levels of nesting in this commit and we'll continue building this new system gradually in future commits.
Internal topic: t/116870.
When we show the links to installed plugins in the admin
sidebar (for plugins that have custom admin routes) we were
previously only doing this if you opened /admin, not if you
navigated there from the main forum. We should just always
preload this data if the user is admin.
This commit also changes `admin_sidebar_enabled_groups` to
not be sent to the client as part of ongoing efforts to
not check groups on the client, since not all a user's groups
may be serialized.
* Revert "FEATURE: Use native number fields for integer inputs (#24984)"
This reverts commit 8fce890ead.
* FIX: Deprecate NumberField, use <input> instead
This reverts #24984 as it introduced regressions (behavioral and visual) and instead it deprecates the NumberField component and replaces its uses in core with native `<input>` elements.
Having the admin sidebar code in an instance initializer is not
ideal because:
* It runs during app boot which may not even be necessary based on site settings
* It makes it hard for plugins to register additional links in time without resorting
to before/after initializer gymnastics
This PR moves the admin sidebar into a lib and creates the panel
in custom-sections.js, then the sections and links are loaded when
the main sidebar component is rendered, which leaves plugins enough
time to add additional links in an initializer.
---------
Co-authored-by: David Taylor <david@taylorhq.com>
This commit adds some more links to the admin sidebar and
removes some to give it more parity with the old nav structure.
This also adds the `addAdminSidebarSectionLink` plugin API to
replace the admin-menu plugin outlet, which is used by plugins
like docker-manager to add links to the old admin nav.
Followup to be841e666e,
this commit does not show the themes/components list filter
if there are < 10 items in the list. This brings parity
with the search input, which does the same. If you only have
a few themes/components, then this extra UI is just unnecessary.
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
In this PR we introduced the enabled/disabled components filter.
https://github.com/discourse/discourse/pull/25105
However, components are slightly more complicated and can be used/unused/enabled/disabled.
* add cc addresses and post_id to sent email logs
* sort cc addresses by email address filter value and collapse additional addreses into tooltip
* add slice helper for use in ember tempaltes
- Add plugin outlet to `AdminUserFieldItem`
- Add ability to include custom fields when saving `AdminUserFieldItem`
- Update plugin API with `includeUserFieldPropertiesOnSave` per ☝️
- Add `DiscoursePluginRegistry` to `UserFieldsController` to add custom columns
This is v0 of admin sidebar navigation, which moves
all of the top-level admin nav from the top of the page
into a sidebar. This is hidden behind a enable_admin_sidebar_navigation
site setting, and is opt-in for now.
This sidebar is dynamically shown whenever the user enters an
admin route in the UI, and is hidden and replaced with either
the:
* Main forum sidebar
* Chat sidebar
Depending on where they navigate to. For now, custom sections
are not supported in the admin sidebar.
This commit removes the experimental admin sidebar generation rake
task but keeps the experimental sidebar UI for now for further
testing; it just uses the real nav as the default now.
Followup e37fb3042d
* Automatically remove the prefix `Discourse ` from all the plugin titles to avoid repetition
* Remove the :discourse_dev: icon from the author. Consider a "By Discourse" with no labels as official
* We add a `label` metadata to plugin.rb
* Only plugins made by us in `discourse` and `discourse-org` GitHub organizations will show these in the list
* Make the plugin author font size a little smaller
* Make the commit sha look like a link so it's more obvious it goes to the code
Also I added some validation and truncation for plugin metadata
parsing since currently you can put absolutely anything in there
and it will show on the plugin list.
Reverts
- DEV: maxmind license checking failing tests #24534
- UX: Show if MaxMind key is missing on IP lookup #18993
These changes are leading to surprising results, our logs are now filling up with warnings on dev environments
We need the change to be redone
Followup to e37fb3042d
Some plugins like discourse-ai and discourse-saml do not
nicely change from kebab-case to Title Case (e.g. Ai, Saml),
and anyway this method of getting the plugin name is not
translated either.
Better to use the plugin setting category if it exists,
since that is written by a human and is translated.
* Remove checkmark for official plugins
* Add author for plugin, which is By Discourse for all discourse
and discourse-org github plugins
* Link to meta topic instead of github repo
* Add experimental flag for plugin metadata and show this as a
badge on the plugin list if present
---------
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
In the long term we should aim to modernize these places, but for now this change will make them compatible with Ember 5.x (while maintaining compatibility with Ember 3.28)
When we started using NumberField for integer site settings
in e113eff663, we did not end up
passing down a min/max value for the integer to the field, which
meant that for some fields where negative numbers were allowed
we were not accepting that as valid input.
This commit passes down the min/max options from the server for
integer settings then in turn passes them down to NumberField.
c.f. https://meta.discourse.org/t/delete-user-self-max-post-count-not-accepting-1-to-disable/285162
Follow-up to #24278 that is slightly less trivial.
* Some were "trivial" usages that were missed in the previous PR because the same file that had at least one other non-trivial usage.
* These involve extra arguments or inheritance but I have checked that they seem correct.
- Remove vendored copy
- Update Rails implementation to look for language definitions in node_modules
- Use webpack-based dynamic import for hljs core
- Use browser-native dynamic import for site-specific language bundle (and fallback to webpack-based dynamic import in tests)
- Simplify markdown implementation to allow all languages into the `lang-{blah}` className
- Now that all languages are passed through, resolve aliases at runtime to avoid the need for the pre-built `highlightjs-aliases` index
This removes all trivial usages of the `{{action}}` keyword (the helper form, not the modifier form), where trivial means:
1. It's a co-located component (`.hbs` next to `.js`)
2. The JS file has a default export that is native class
3. `{{action "foo"}}` or `(action "foo")` with no extra arguments
4. There is a corresponding `foo()` method defined on the class (not inherited, etc)
There are more usages that is slightly more involved (with arguments, etc) that we can deal with, but this PR seems big enough so I just included the easiest cases here.
To aid review, each file is converted in an individual commit, and the matching method is temporary annotated with `@__action__` instead of the normal `@action`. This forces a git diff when it is already annotated as `@action`.
* DEV: {{action}} -> @action admin-penalty-post-action.hbs
* DEV: {{action}} -> @action admin-report.hbs
* DEV: {{action}} -> @action admin-watched-word.hbs
* DEV: {{action}} -> @action emoji-value-list.hbs
* DEV: {{action}} -> @action bool.hbs
* DEV: {{action}} -> @action category.hbs
* DEV: {{action}} -> @action secret-value-list.hbs
* DEV: {{action}} -> @action category-list.hbs
* DEV: {{action}} -> @action color.hbs
* DEV: {{action}} -> @action compact-list.hbs
* DEV: {{action}} -> @action group-list.hbs
* DEV: {{action}} -> @action host-list.hbs
* DEV: {{action}} -> @action named-list.hbs
* DEV: {{action}} -> @action simple-list.hbs
* DEV: {{action}} -> @action tag-group-list.hbs
* DEV: {{action}} -> @action tag-list.hbs
* DEV: {{action}} -> @action value-list.hbs
* DEV: {{action}} -> @action watched-word-form.hbs
* DEV: {{action}} -> @action composer-messages.hbs
* DEV: {{action}} -> @action section.hbs
* DEV: {{action}} -> @action user-status-picker.hbs
* DEV: cleanup @__action__ -> @action
This commit adds an /admin/customize/theme-components route,
that opens the theme page with the components tab pre-selected,
so people can navigate to that directly.
Followup to b53449eac9,
it was too easy to add broken routes which would break
configuration for the whole site, so now we validate ember
routes on save.
Followup to b53449eac9, we cannot
generate the links to plugin admin pages in this way because it
depends on which plugins are installed; we would need to somehow
do it at runtime. Leaving it out for now, for people who need to
find these admin routes the Ember Inspector extension for Chrome
can be used in the meantime.
NOTE: Most of this is experimental and will be removed at a later
time, which is why things like translations have not been added.
The new /admin-revamp UI uses a sidebar for admin nav. This initial
step adds a script to generate a map of all the current admin nav
into a format the sidebar to read. Then, people can experiment
with different changes to this structure.
The structure can then be edited from `/admin-revamp/config/sidebar-experiment`,
and it is saved to local storage so people can visually experiment with different ways
of showing the admin sidebar links.
* FEATURE: Add keywords support for site_settings search
This change allows for a new `keywords` field that can be added to site
settings in order to help with searching. Keywords are not visible in
the UI, but site settings matching one of the contained keywords will
appear when searching for that keyword.
Keywords can be added for site settings inside of the
`config/locales/server.en.yml` file under the new `keywords` key.
```
site_settings
example_1: "fancy description"
example_2: "another description"
keywords:
example_1: "capybara"
```
* Add keywords entry for a recently changed site setting and add system specs
* Use page.visit now that we have our own visit
Previously, focus wasn't being applied correctly on dialogs using named
components. This was because the A11YDialog was being invoked before
the component was completely rendered.
The long-term plan is to move away from A11YDialog doing the rendering
here, but for now this should do.
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
As much as possible I would like us to avoid having to go the with a global event listener on click/mouseover. For now I have removed all cases of `data-tooltip`, if we clearly identify a use case of a global event listener we might reconsider this.
The following changes are also included:
- by default tooltips won't attempt to focus first focusable element anymore
- tooltip will now use `cursor: pointer` by default
- a new service has been introduced: `InternalTooltip` which is responsible to track the current instance displayed by a `<DTooltip />`. Portal elements when replaced are not properly cleaned and I couldn't figure out a way to have a proper hook to ensure the previous `DTooltipInstance` is properly set as not expanded; this problem was very visible when using a tooltip as interactive and hovering another tooltip, which would replace the interactive tooltip as not closed.
`registerUnbound` was present for legacy reasons when using helpers in raw-hbs and has been replaced by `registerRawHelper`.
For new helpers used only in classic ember template, exporting a default function from `helpers/*.js` is recommended.
This change also means that all existing helpers will be available to import in `gjs` files.
Co-authored-by: David Taylor <david@taylorhq.com>
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
![image](https://github.com/discourse/discourse/assets/920448/fa0f25e1-e178-4d94-aa5f-472fd3efd787)
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
![image](https://github.com/discourse/discourse/assets/920448/ec05ca8b-5a54-442b-ba89-6af35695c104)
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
As of #23867 this is now a real package, so updating the imports to
use the real package name, rather than relying on the alias. The
name change in the package name is because `I18n` is not a valid
name as NPM packages must be all lowercase.
This commit also introduces an eslint rule to prevent importing from
the old I18n path.
For themes/plugins, the old 'i18n' name remains functional.
This reverts commit 5f0bc4557f.
Through extensive internal discussion we have decided to revert
this change, as it significantly impacted moderation flow for
some Discourse site moderators, especially around "something else"
flags. We need to re-approach how flags are counted holistically,
so to that end this change is being reverted.
We'll probably have to keep the globals around for compatibility, but we should always import it ourselves. We'll followup with an updated eslint config to enforce this.
`escape` from `pretty-text/sanitizer` is a re-export of the same
function defined in `discourse-common`. Updating the import paths
across the codebase to use the `discourse-common` import path.
`escape` is a rather simple function that can be accomplished with
a regular expression in `discourse-common`.
On the other hand, the remaining parts in `pretty-text/sanitizer`
has a lot of code, PLUS it depend on the rather heavy "xss" NPM
library.
Currently, most of the consumers of `pretty-text/sanitizer` are of
the `{ escape }` varient. This is resolved by this PR.
The remaining usages are either:
1. via/through `PrettyText` which is essentially gated behind
loading the markdown-it bundle, OR
2. via `sanitize` from `discourse/lib/text`
I believe we may ultimately be able to move all the usages to behind
the markdown-it bundle (or, equivilantly, set up another lazy bundle
for `sanitize`) and be able to shed the sanitization code and the
"xss" library from the initial page load.
`discourse/lib/text` also defines a `sanitizeAsync` which is gated
behind loading the markdown-it bundle.
Looking through the usages of `sanitize`, I believe most of these
can be safely switched to use `sanitizeAsync`, in that they are
already in an asynchrnous path that handles a server response. Most
of them are actually rendering a piece of server-generated HTML
message as flash message, so I am not sure there really is value in
sanitizing (we should be able to trust our own server?), but in any
case, code-wise, they should already be able to absorb the async
just fine.
I am not sure if `sanitize` and `sanitizeAsync` are actually API
compatible – they both take `options` but I think those `options` do
pretty different things. This is somethign for another person to
investigate down the road in another PR.
According to `all-the-plugins`, `discourse-graphviz` also import
from this location, so perhaps we should PR to update. That being
said, it doesn't really hurt anything to keep the alias around for
a while.
For the admin plugin list we want to be able to link to
a meta topic for plugins, but we have no standard way to
do this at the moment. This adds support for meta_topic_id
alongside other plugin metadata like authors, URL etc,
that gets built into a Meta topic URL in the serializer.
Currently, if you set an integer site setting in the admin interface and include thousands separators, you will silently configure the wrong value.
This PR replaces TextField inputs for integer site settings with NumberField. It also cleans the numeric input of any non-digits in the backend in case any separators make it through.
Regression from https://github.com/discourse/discourse/pull/23668 where we stopped passing in `this.badgeReason` to the badge granting function. This PR fixes that and adds a unit test to cover that code path.
1. actually call `popupAjaxError`, thanks :P
2. don't close a modal on error
3. use `extractError()` instead of manually joining error messages
4. …or passing just the error object to `this.flash`
Our custom implementation of `getOwner` includes a fallback which returns an owner, even if the passed object does not have one set. This is confusing and creates a false sense of security. Generally if the fallback is used, it means there is a problem with the patterns being used.
This commit renames our custom implementation to `getOwnerWithFallback`, while maintaining the old `getOwner` export with a deprecation notice. Core code is updated to use the official `@ember/application` implementation, or the new `getOwnerWithFallback` function.
This commit updates all core uses of `{ getOwner } from discourse-common/lib/get-owner` to use `getOwnerWithFallback`. Future commits will work through and convert many of these to use the official `@ember/application` implementation
DEV: Adjust site setting search limiter
This opens up the site setting search limiter some more so that when
searching for "min length" it will contain
"min_personal_message_post_length" as one of the results, but not open
it up so much so that when searching for "digest",
"pending_users_reminder_delay_minutes" won't show up in the results
because it isn't really related.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
- Switch to `@tracked` and native getters
- Remove queryParam defaults which are awkward to work with. Instead, add `resolvedBlah` getters
- Add 'no results found' text
- Use standard 'model' key instead of a custom `setupController` method
- Remove use of `route-action`
- Remove `{{action` helper
Default queryParams in ember controllers are tricky to work with, especially when combined with the new router service. Instead, we can handle defaults ourselves
* DEV: upgrade grant badge modal to glimmer
* DEV: add unit tests for grant badge utils
* DEV: replace grant-badge-controller mixin with grant-badge-utils in admin-user-badges controller
* DEV: remove GrantBadgeController mixin
1. Use `this.` instead of `{{action}}` where applicable
2. Use `{{fn}}` instead of `@actionParam` where applicable
3. Use non-`@` versions of class/type/tabindex/aria-controls/aria-expanded
4. Remove `btn` class (it's added automatically to all DButtons)
5. Remove `type="button"` (it's the default)
6. Use `concat-class` helper
This tab doesn't really provide anything useful, and can be quite
confusing in some cases. Each plugin is already listed below, and
you can navigate to their settings from there. We want to move away
from the catch-all Plugins category for site settings. Core plugins are
not shown in this list as at 97a812f022.
This commit contains a few improvements:
* Use LinkTo instead of a button with a weird action referencing the
controller to navigate to the filtered settings for a plugin
* Add an AdminPlugin model with tracked properties and use that when
toggling the setting on/off and in the templates
* Make it so the Settings button for a plugin navigates to the correct
site setting category instead of always just going to the generic
"plugins" one if possible
DEV: Display fuzzy site setting search results below direct matches
When searching for site settings, in the results under the ALL category
all the fuzzy search results were showing first followed by any direct
matches. This change adjusts that so that fuzzy searches show below
direct matches.
Fuzzy results are now also sorted based on their gap calculation in
ascending order.
Sometimes the fuzzy search would return too many site setting results
making it hard to find what you are searching for. This change still
allows for fuzzy searching but tightens up the criteria for being a
fuzzy match.
One example is searching for 'cheer', a term associated with a plugin,
previously returned ~55 search results. With this change it will return
~13 (Actual numbers depend on how many plugins your instance has).
Another example is searching for 'digest'. Previously returned ~37
results and now will return ~14.
Follow up to: e63e193a0a
See also: https://meta.discourse.org/t/276013
Previously, we had a `showFooter` boolean on the application controller which would be set true/false in various routes by different routes/controllers. A global `routeWillChange` hook would set it `false` before every route transition, and the destination route/controller would have to set it `true` for the footer to show correctly.
This commit replaces that with a new 'declarative' system. Instead of having to set the value true/false manually, UIs which need the footer to be hidden can simply include the `{{hide-application-footer}}` helper in their template when needed. The helper/service will automatically keep track of all the current invocations of that helper, and only show the footer when there are 0 invocations.
This significantly simplifies things, and removes the need for many observers and controller injections, both of which are considered 'code smells' in modern Ember applications.
In this commit 2.5 years ago, variables for showOnUserCard and showOnProfile were removed, but we still used them in the component. e29605b
This corrects the variable names and adds a test to confirm the text is now shown.
This commit makes some visual tweaks to the admin panel plugin list, and introduces functional 'toggle switches' for admins to enable/disable plugins more easily.
Co-authored-by: Jordan Vidrine <jordan@jordanvidrine.com>
FEATURE: Only approved flags for post counters
* Why was this change necessary?
The counters for flagged posts in the user's profile and user index from
the admin view include flags that were rejected, ignored or pending
review. This introduces unnecessary noise. Also the flagged posts
counter in the user's profile includes custom flags which add further
noise to this signal.
* How does it address the problem?
* Modifying User#flags_received_count to return posts with only approved
standard flags
* Refactoring User#number_of_flagged_posts to alias to
User#flags_received_count
* Updating the flagged post staff counter hyperlink to navigate to a
filtered view of that user's approved flagged posts to maintain
consistency with the counter
* Adding system tests for the profile page to cover the flagged posts
staff counter
provide the ability to edit theme settings in the json editor, and also copy them as a text file so they can be pasted into another instance.
Reference: /t/65023
- Convert `admin-incoming-email` modal to component-based API
- Testing that the modal was working in local development was extremely challenging due to the need for `rejected` and `bounced` emails. Something that is not easy to stub in a local dev environment. To make this process more smooth for future developers I have added a new rake task:
```
desc "Creates sample email logs"
task "email_logs:populate" => ["db:load_config"] do |_, args|
DiscourseDev::EmailLog.populate!
end
```
That will generate fully functional email logs in development to be toyed with.
<img width="787" alt="Screenshot 2023-07-20 at 3 27 04 PM" src="https://github.com/discourse/discourse/assets/50783505/47b3fe34-cd7e-49a5-8fe6-768c0fbd1aa2">
The gjs/gts formats are a new pattern for authoring Ember components. This commit introduces support for these patterns to our build pipeline for core/plugins, and converts a handful of components to use the new format. It also introduces relevant updates to our linting config, and to our sample vscode configuration.
Co-authored-by: Godfrey Chan <godfreykfc@gmail.com>
Co-authored-by: Krystan HuffMenne <kmenne+github@gmail.com>
Since 0fa92529ed, helpers can now be implemented as plain JS functions. This makes them much easier to write/read, and also makes them usable in `<template>` gjs files.
Recently we started giving admins a notice in the advice panel when their translations have become outdated due to changes in core. However, we didn't include any additional information.
This PR adds more information about the outdated translation inside the site text edit page, together with an option to dismiss the warning.
011ba5b9 slightly changed the way the staff-action-log route is activated. It's now possible for `deserializeQueryParam` to be called with a null value, so we need to deal with that case.
This route is currently untested - we'll follow-up with another commit to add some.
This PR adds a feature to help admins stay up-to-date with their translations. We already have protections preventing admins from problems when they update their overrides. This change adds some protection in the other direction (where translations change in core due to an upgrade) by creating a notice for admins when defaults have changed.
Terms:
- In the case where Discourse core changes the default translation, the translation override is considered "outdated".
- In the case above where interpolation keys were changed from the ones the override is using, it is considered "invalid".
- If none of the above applies, the override is considered "up to date".
How does it work?
There are a few pieces that makes this work:
- When an admin creates or updates a translation override, we store the original translation at the time of write. (This is used to detect changes later on.)
- There is a background job that runs once every day and checks for outdated and invalid overrides, and marks them as such.
- When there are any outdated or invalid overrides, a notice is shown in admin dashboard with a link to the text customization page.
Known limitations
The link from the dashboard links to the default locale text customization page. Given there might be invalid overrides in multiple languages, I'm not sure what we could do here. Consideration for future improvement.
Follow-up to b27e12445d
This commit adds 2 new site settings `default_sidebar_link_to_filtered_list` and `default_sidebar_show_count_of_new_items` to control the default values for the navigation menu preferences that were added in the linked commit (`sidebar_link_to_filtered_list` and `sidebar_show_count_of_new_items` respectively).
This is the first of a number of PRs aimed at helping admins manage their translation overrides. It simply adds a list of available interpolation keys below the input field when editing an override.
It also includes custom interpolation key.
Fixes an issue where saving a theme translation would reset unsaved
changes made to other theme translations.
Also cleans up unused `saveSettings` and `saveTranslations` actions.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Communities can use sidebar or header dropdown, therefore navigation menu is a better name settings in 2 places:
- Old user sidebar preferences;
- Site setting about default tags and categories.
We have been struggling lately finding site settings due to 30 setting limit
This was introduced for performance reasons a while back but is no longer as
needed given that ember is faster.
Additionally searching is hard, so allow people to use fuzzy search against
setting name.
As part of another regression, we realized that the plugins tab is visible to moderators, but they cannot interact with anything inside without triggering authorization errors.
This change hides the plugin tab for non-admin users.