This commit narrows down the list of fonts we offer
in our setup wizard and simplifies things to only
show a single font dropdown. This selection will then
set the `base_font` and `heading_font` site setting to
the same value.
For existing sites that may have set different values,
we will still show 2 dropdowns when visiting the wizard.
We are also changing our default font to the more modern
selection Inter, replacing Arial. Arial is very dependent
on system installed fonts, whereas Inter we can package
to everyone in Discourse.
Finally, for existing sites that have not changed their default
from Arial, we will keep that value via a migration so we do
not surprise site owners with a completely new font.
The GDPR requires all users to be able to export their data, or request an export of their data. This is fine for active users as we have a data export button on user profiles, but suspended users have no way of accessing the data export function, and the workaround for admins to export data for suspended users involves temporarily unsuspending them, then impersonating the user to export the data as them.
Since suspended users no longer have access to their account, we can safely assume that the export request will be coming via a medium outside of Discourse (eg, email). This change is built with this workflow in mind.
This change adds a new "User exports" section to the admin user page, allowing admins to start a new export, and to download the latest export file.
We're embarking on a project for overhauling the color palette and theme
systems in Discourse. As part of this project, we're making each color
palette include light and dark modes instead of the status quo of
requiring 2 separate color palettes to implement light and dark modes.
This commit is a first step towards that goal; it adds a code path for
generating and serving `color_definitions` stylesheets using the
built-in dark variant of a color palette. All of this code path is
behind a default-off site setting `use_overhauled_theme_color_palette`,
so there's no change in behavior unless the setting is enabled.
Internal topic: t/141467.
Lazy loading images naturally causes a slight delay, because the browser
only starts to load them after laying out the DOM and checking whether
they're in the viewport. Plus, in Safari, re-rendering the DOM of a
lazy-loaded image always causes a brief flicker, even if the image is
already cached in the browser.
Lazy-loading is most beneficial on large one-off images which are often
rendered outside the viewport. That's frequently the case for images
which users share in topics. Avatars, on the other hand, are very small
images, they're very often above-the-fold, and the same avatar often
occurs many times on the same page.
Therefore, this commit removes `loading="lazy"` from avatars, which
should improve avatar load times in all browsers, and stop the flicker
in Safari.
---
Tapping logo to reload topic-list in Safari. Before: https://github.com/user-attachments/assets/242299f8-aa13-4991-b321-2f143603ed26
After: https://github.com/user-attachments/assets/5e5bfd28-3a78-40fd-af21-3d92e7b3ba8a
Previously this setting would only control values received in an 'email'
field from an identity provider. This commit extends it, so that it also
applies to email-like content in other fields. This provides improved
protections against partial email addresses being leaked
Stylelint is a css linter: https://stylelint.io/
As part of this change we have added two javascript scripts:
```
pnpm lint:css
pnpm lint:css:fix
```
Look at `.vscode/settings.json.sample` and `.vscode/extensions.json` for
configuration in VSCode.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
In a PM, if a user has made a post, and is later removed from the PM, they can still edit their own post. This can be done either if they happen to have a composer open in an active tab, or by just manually sending an HTTP request.
The post guardian is missing a basic check, can_see_post_topic? when we determine whether a user can edit a post or not. This basic check is already in place when we determine whether a user can see the post in the first place.
This PR adds in the missing check, so that if the user tries to edit their post after being removed, they'll receive a 403.
It also adds a MessageBus message scoped to the affected user and topic when they are removed from the PM, which will redirect them to their inbox. This helps avoid a stale tab where they are still in the PM which they by right can now no longer see.
When secure uploads are enabled, we have to attach the images in the
digest so they can show up in the email.
However, we send attaching all the attachments, including "files" and
"media".
This ensures we only attach images when sending a digest.
Internal t/144542
The new site setting `allow_anonymous_and_tl0_to_flag_illegal` allows
tl0 users to flag illegal content. In addition, anonymous users are
instructed on how to flag illegal content by sending emails.
Also `email_address_to_report_illegal_content` setting is added. If not
provided, then the site contact email is used.
Related: https://github.com/discourse/discourse/pull/30535
In the PR above, the [content-disposition
header](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition)
was removed for all non-svg files due to the "attachment" keyword added
to them, causing files to be downloaded instead of opening in a new tab
when requested. When removing that, it also removed the filename
attribute attached to s3 uploads.
After some testing, it turns out that `filename` is also respected when
next to `inline`, despite it not being obvious [in
docs](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition#syntax).
This commit adds inline+filename so that users can still download files
and have filenames be respected instead of using the s3 hash.
```http
<!-- mdn docs -->
Content-Disposition: inline
Content-Disposition: attachment
Content-Disposition: attachment; filename="file name.jpg"
Content-Disposition: attachment; filename*=UTF-8''file%20name.jpg
<!-- this actually works too -->
Content-Disposition: inline; filename="file name.jpg"
```
The `key` provided in the S3 inventory file will esacpe any special
characters in the filename of the key so we need to unescape. Otherwise,
uploads with extensions that conatins special characters will fail to
match records which we insert into the temporary table based off the
s3 inventory file.
This change allows controllers that construct TopicQuery parameters, to pass per_page into the TopicQuery constructor as an option. I can't see why this shouldn't be a public param, so long as we properly validate the value!
Internal discussion at t/145686.
This is a revert of 92793c5b73871ba84b024c2ce50055a0776f1ba6.
Following on from discussions after the previous commit, it became evident that it was only a small step towards solving the larger problem of finding site settings in a reliable fashion across multiple languages.
This is going to take more thought and discussion, and since the changes introduced in the previous commit are effectively non functional without additional work, I'm going to revert it for now.
`discourse-common` was created in the past to share logic between the
'wizard' app and the main 'discourse' app. Since then, the wizard has
been consolidated into the main app, so the separation of
`discourse-common` is no longer useful.
This commit moves `discourse-common/(lib|utils)/*` into
`discourse/lib/*`, adds shims for the imports, and updates existing
uses in core.
When we send an email notification to a user, we always include a link
that will allow them unsubscribe to these emails.
If the user reply to the email notification, the link to unsubscribe
might still be present in the final post (often in the elided part).
Since those links do not require authentication to unsubscribe a user
(this is a feature, not a bug), we would like to avoid showing them to
other users on Discourse.
(If such an email is forwarded elsewhere, then it's totally out of our
control.)
This commmit ensures we always strip those unsubscribe links from any
incoming email to avoid making it easier to unsubscribe another user.
Since the format we use for those links might be similar to the ones
used by other applications, the regular expression used to match those
links uses the absolute URL of the Discourse (aka.
`Discourse.base_url`).
Following on from f369db5ae9a29a23299dff5f14768167230b0b79, we need to apply a similar fix to inline oneboxes, since they use a different code path to retrieve the onebox provider data.
This change ensures the Accept-Language header is sent by inline onebox requests, too.
Following on from f369db5ae9a29a23299dff5f14768167230b0b79, this change adds the ability to choose a custom locale to send to onebox providers.
If this setting is left blank, it will fall back to using default_locale.
Onebox embeds currently default to accepting any language response from the destination, which can have some surprising behaviour. For example the `curl` equivalent of what Onebox does:
```
% curl -si -H "Accept-Language: *" 'https://developer.android.com/studio' | grep location:
location: /studio?hl=hi
```
This PR uses the value of `SiteSetting.default_locale` to populate the `Accept-Language` header, falling back to English if that isn't available, then finally accepting whatever language the destination makes available.
* FIX: Wizard improvements post-merge part 1
Followup 3135f472e2c4221a9348aec27514d3e2947bc9ab
Fixes the following:
* On mobile, the Styling step was very narrow
* When clicking Next on the Styling step after previously
selecting Hot, we got an error
Also makes the following UX improvements for the preview:
* Use different topic titles for Latest and Hot
* Also make Hot view and reply numbers higher
This helps differentiate the two previews.
* DEV: Review fixes
Back then in 31e31ef, we added the Content-Disposition headers so that SVGs get downloaded instead of get run in the browser. Inadvertently, this also causes other attachments like pdfs and videos to be downloaded instead of heeding the "Open in new tab" option that users choose in the browser.
When the header is removed, the default value is "inline", this allows the browser to perform as requested. This also applies to other file types like pdfs, allowing users to "Open in new tab" and view them in the browser instead of always downloading them.
Existing tests (#10205) already do check that SVGs remain downloaded. Some existing tests written for PDFs have been modified to cater for SVGs instead, when there was a bug in defining the filenames per #10108
Experimental "What's new?" feature feed items previously calculated
a boolean for experimentEnabled on the client based on the siteSettings
service, and this would control the initial state of the experiment
toggle.
However this requires the person who creates the site setting for the
experiment to remember to set it to `client: true`. This commit removes
that manual step by calculating whether the experiment is enabled
server-side, where we have access to all the site settings.
Our bulk report endpoint uses `hijack`, which does not
use the current user's locale via the `with_resolved_locale`
method in `ApplicationController`. This is happening because
we are doing `around_action` to set the locale, then calling
the code in the block inside the action directly when we use
`hijack`.
We can fix this by capturing `I18n.locale` when starting the
hijack then using `I18n.with_locale` when evaluating the
block inside `hijack`, this way the translations will always
use the correct locale based on the current user.
This commit contains various quality improvements to
our site setup wizard, along with some rearrangement of
steps to improve the admin setup experience and encourage
admins to customize the site early to avoid "all sites look the
same" sentiment.
#### Step rearrangement
* “Your site is ready” from 3 → 4
* “Logos” from 4 → 5
* “Look and feel” from 5 → 3
#### Font selector improvements
Changes the wizard font selector dropdown to show
a preview of all fonts with a CSS class so you don't
have to choose the font to get a preview.
Also makes the fonts appear in alphabetical order.
#### Preview improvements
Placeholder text changed from lorem ipsum to actual topic titles,
category names, and post content. This makes it feel more "real".
Fixes "undefined" categories. Added a date to the topic timeline.
Fixes button rectangles and other UI elements not changing in
size when the font changed, leading to cut off text which looked super
messy. Also fixed some font color issues.
Fixed table header alignment for Latest topic list.
#### Homepage style selector improvements
Limited the big list of homepage styles to Latest, Hot, Categories with latest topics,
and Category boxes based on research into the most common options.
#### Preview header
Changed the preview header to move the hamburger to the left
and add a chat icon
#### And more!
Changed the background of the wizard to use our branded blob style.
When receiving emails sent with Exchange, we look for some markers to identify the body of the mail and the reply (aka. previous email).
For some reasons, those markers aren't 100% reliable and sometimes, only one of them is present.
The commit 20ba54d53630b57c25fa3f325b0f219581314936 introduced the bug because the `HTML_EXTRACTERS` regex for exchange looks for either `messageBodySection` or `messageReplySection` but we were only using the `reply` section. So if an email had only the `body` section, it would not be correctly extracted.
This commit handle the cases where either one of them is missing and use the other one as the actual "reply". When both are present, it correctly elides the "reply" section.
We were missing the "List-Unsubscribe-Post" header in emails we sent to allow Yahoo / GMail and others to automagically show a link to unsubscribe.
Internal ref - t/144713
The profile hiding feature is particularly problematic on sites that are
private (invite only or must approve users) so it is unconditionally disabled.
Also certain sites may prefer to disable the anti spam feature, they can
opt out using `hide_new_user_profiles`
Co-authored-by: Martin Brennan <martin@discourse.org>
This commit replaces the `full_name_required` setting with a new `full_name_requirement` setting to allow more flexibility with the name field in the signup form. The new setting has 2 options, "Required at signup" and "Optional at signup", which are equivalent to the true/false possibilities of the old setting, and a third option "Hidden at signup" that hides the name field from the signup form, making it effectively optional too.
New sites will have the "Hidden at signup" option as the default option, and existing site will continue to use the option that maps to their current configuration.
Internal topic: t/136746.
This commit adds the `add_request_rate_limiter` plugin API which allows plugins to add custom rate limiters on top of the default rate limiters which requests by a user's id or the request's IP address.
Example to add a rate limiter that rate limits all requests from Googlebot under the same rate limit bucket:
```
add_request_rate_limiter(
identifier: :country,
key: ->(request) { "country/#{DiscourseIpInfo.get(request.ip)[:country]}" },
activate_when: ->(request) { DiscourseIpInfo.get(request.ip)[:country].present? },
)
```
* Split `shutdown` into two separate methods for better control:
- `shutdown` - signals threads to stop accepting new work
- `wait_for_termination` - waits for threads to finish (with optional timeout)
* Add tracking of busy threads via `@busy_threads` Set
* Make idle_time parameter optional with 30-second default
* Improve thread spawning logic:
- Spawn initial thread immediately when work is posted
- Spawn additional threads when all threads are busy and work is queued
* Fix race condition in work distribution
* Add busy thread count to stats output
* Add test coverage for zero min_threads configuration
This commit makes the ThreadPool more reliable, easier to use, and adds
better visibility into its internal state.
---------
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit introduces a new ThreadPool class that provides efficient worker
thread management for background tasks. Key features include:
- Dynamic scaling from min to max threads based on workload
- Proper database connection management in multisite setup
- Graceful shutdown with task completion
- Robust error handling and logging
- FIFO task processing with a managed queue
- Configurable idle timeout for worker threads
The implementation is thoroughly tested, including stress tests, error
scenarios, and multisite compatibility.
There’s currently a bug when using a dedicated class as a policy in
services: if that class delegates its `#call` method (to an underlying
strategy object for example), then an error will be raised saying steps
aren’t allowed to provide default parameters.
This should not happen, and this patch fixes that issue.
This commit reimplements how we monitor Sidekiq processes that are
forked from the Unicorn master process. Prior to this change, we rely on
`Jobs::Heartbeat` to enqueue a `Jobs::RunHeartbeat` job every 3 minutes.
The `Jobs::RunHeartbeat` job then sets a Redis key with a timestamp. In
the Unicorn master process, we then fetch the timestamp that has been set
by the job from Redis every 30 minutes. If the timestamp has not been
updated for more than 30 minutes, we restart the Sidekiq process. The
fundamental flaw with this approach is that it fails to consider
deployments with multiple hosts and multiple Sidekiq processes. A
sidekiq process on a host may be in a bad state but the heartbeat check
will not restart the process because the `Jobs::RunHeartbeat` job is
still being executed by the working Sidekiq processes on other hosts.
In order to properly ensure that stuck Sidekiq processs are restarted,
we now rely on the [Sidekiq::ProcessSet](https://github.com/sidekiq/sidekiq/wiki/API#processes)
API that is supported by Sidekiq. The API provides us with "near real-time (updated every 5 sec)
info about the current set of Sidekiq processes running". The API
provides useful information like the hostname, pid and also when Sidekiq
last did its own heartbeat check. With that information, we can easily
determine if a Sidekiq process needs to be restarted from the Unicorn
master process.
`new_in_category` was using `first` instead of `limit`
This meant it gets an array and that means that you can not operate on it easily in a modifier.
This ensures we always give the modifier a relation, with the notable exception of suggested topics.
We're changing the default of hide_email_address_taken to true. This is a trade-off we want to make, as it prevents account enumeration with minimal impact on legitimate users. If you forget you have an account and try to sign up again with the same e-mail you'll receive an e-mail letting you know.
Previously, theme hbr files were compiled to an IIFE, which would be executed before the app is booted. That is causing silenced deprecations to be printed, because the deprecation-workflow isn't set up when the IIFE is run.
This commit updates the theme compiler so that it matches the ember-cli-based raw-hbs compiler. Templates are output to normal modules, which will then be loaded by the existing `eager-load-raw-templates` initializer. This runs after the app has started booting.
Currently, there are two ways (kind of) for accessing `params` inside a
service:
- when there is no contract or it hasn’t been reached yet, `params` is
just the hash that was provided to the service. To access a key, you
have to use the bracket notation `params[:my_key]`.
- when there is a contract and it has been executed successfully,
`params` now references the contract and the attributes are accessible
using methods (`params.my_key`).
This patch unifies how `params` exposes its attributes. Now, even if
there is no contract at all in a service, `params` will expose its
attributes through methods, that way things are more consistent.
This patch also makes sure there is always a `params` object available
even when no `params` key is provided to the service (this allows a
contract to fail because its attributes are blank instead of having the
service raising an error because it doesn’t find `params` in its context).
This patch aims to improve the steps inspector output:
- The service class name is displayed at the top.
- Next to each step is displayed the time it took to run said step.
- Steps that didn’t run are hidden.
- `#inspect` automatically outputs the error when it is present.
It doesn't make much sense to have the content of a `<details>` in an excerpt so I replaced them with "▶ summary" instead.
That way, they can't be (ab)used in user cards for example.
Reference - https://meta.discourse.org/t/335094
The new name may be too long for the bookmarks.name column and raise an
exception. This changes allows the remapper to truncate the new value to
fit (truncates to 100 characters).
We've seen in some communities abuse of user profile where bios and other fields are used in malicious ways, such as malware distribution. A common pattern between all the abuse cases we've seen is that the malicious actors tend to have 0 posts and have a low trust level.
To eliminate this abuse vector, or at least make it much less effective, we're making the following changes to user profiles:
1. Anonymous, TL0 and TL1 users cannot see any user profiles for users with 0 posts except for staff users
2. Anonymous and TL0 users can only see profiles of TL1 users and above
Users can always see their own profile, and they can still hide their profiles via the "Hide my public profile" preference. Staff can always see any user's profile.
Internal topic: t/142853.
Currently only system flags are translated. When we send message to the user that their post was deleted because of custom flag, we should default to custom flag name.
