The values in Discourse dropdown menus only come from admin-defined strings, not unsanitised end-user input, so this lack of escaping was not exploitable.
* hidden siteSetting to enable experimental sidebar
* user preference to enable experimental sidebar
* `experimental_sidebar_enabled` attribute for current user
* Empty glimmer component for Sidebar
Before this change, we were using the labels from the original chartData to the chart builder, and we would then apply our collapse function on each dataset which could change the labels and cause a mismatch.
This was very visible when using quarterly periods on consolidated pageviews.
We were calling `dup` on the hash and using that to check for changes. However, we were not duplicating the values, so changes to arrays or nested hashes would not be detected.
Other things may have added things to the style attribute (e.g. the `image-aspect-ratio` decorator).
Unfortunately this is difficult to add a test for because `lazy-load-images` leans on the `onload` event. We have no control over image loading in tests, so race conditions would be very likely.
- Make proxy pass `x-forward...` headers, so that Rails can set the host/port correctly in the csp
- Make `testem.js` available on a route which is within the app's default CSP
There was an edge when a user re-quoted a nested quote that it would return an incorrect `full name` but the correct `username` for the original quote. This PR updates the logic to fall back to using the OP user's username.
The complexity of the changes required to allow for full names to be displayed on nested quotes far outweighs how rare quoting nested quotes is.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
This was causing unexpected behaviors on production builds. And also on firefox on local environnement, however the issues was slightly different.
- production chrome: colors don't load
- dev firefox: colors don't change when selecting a different color set
A category_required_tag_group should always have an associated tag_group. However, this is only enforced at the application layer, so it's technically possible for the database to include a category_required_tag_group without a matching tag_group.
Previously that situation would cause the whole site to go offline. With this change, it will cause some unexpected behavior, but the site serializer will not raise an error.
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
* Adds a hidden site setting: `max_participant_names`
* Replaces duplicate code in `GroupSmtpMailer` and `UserNotifications`
* Groups are sorted by the number of users (decreasing)
* Replaces the query to count users of each group with `Group#user_count`)
* Users are sorted by their last reply in the topic (most recent first)
* Adds lots of tests
This reverts commit 01107e418e.
We have seen some random occurrences of corrupted assets, and think it may be related to the sprockets 4 update. Reverting for investigation
This PR enables custom email dark mode styles by default that were added here.
There is currently poor support for dark mode queries in mail clients. The main beneficiary of these changes will be Apple Mail and Outlook.
Enjoy the darkness 🕶️
Commit 68497bddf2 implemented a function
to format durations in a medium format, similar to how durationTiny did.
The existent translation strings do not cover all cases and this commit
adds the missing translation strings.
1. When the select-kit body is rendered, it defaults to being displayed under the triggering select-kit header, unless...
there isn't enough space between the bottom of the select-kit header and the bottom of the viewport
&
there's enough space on top of the select-kit header, and in that case, we render it on top.
2. We give it a bit of padding on top, so it never renders below the header on the Z-axis.
14778ba52e/app/assets/javascripts/select-kit/addon/components/select-kit.js (L877-L884)
3. If there isn't enough space between the bottom of the viewport and the bottom of the select-kit header, and there isn't enough space between its top and the bottom of `d-header`, it renders at the bottom of the select-kit header.
In theory, number 3 above rarely ever happens. However, it can occur in the case of the user preferences page in combination with a large select-kit body (many categories).
The select-kit body then renders below the trigging select-kit header, but it's cut off. Users won't be able to see the entire select-kit body.
Here's an example
a719734d92.mp4
This PR adds a "prevent overflow" modifier to Popper. What it does is that it handles the case above.
If there's not enough space below the select-kit header or above it, render the select-kit body below the select-kit header BUT... anchor it to the bottom of the viewport.
Here's what that looks like
32cd1639bb.mp4
After this fix, even very large select-kit bodies will always be on the screen.
Please note that this PR has no impact on either number 1 or number 2 above, and those will continue to function as they currently do.
The only downside here is that the select-kit body might cover the select-kit header if it needs to be anchored at the bottom of the viewport, and it's very large. However, between that and not being able to see all the options, I think it's a fair compromise. There's only so much space in the viewport.
This PR ignores mobile because we have a different placement strategy. We use `position: absolute`... so, users can scroll the viewport if needed.
Previously, 'crop' would resize the image to have the requested width, then crop the height to the requested value. This works when cropping images vertically, but not when cropping them horizontally.
For example, trying to crop a 500x500 image to 200x500 was actually resulting in a 200x200 image. Having an OptimizedImage with width/height columns mismatching the actual OptimizedImage width/height causes some unusual issues.
This commit ensures that a call to `OptimizedImage.crop(from, to, width, height)` will always return an image of the requested width/height. The `w x h^` syntax defines minimum width/height, while maintaining aspect ratio.
This commit fixes two issues at play. The first was introduced
in f6c852b (or maybe not introduced
but rather revealed). When a user posted a new message in a topic,
they received the unread topic tracking state MessageBus message,
and the Unread (X) indicator was incremented by one, because with the
aforementioned perf commit we "guess" the correct last read post
for the user, because we no longer calculate individual users' read
status there. This meant that every time a user posted in a topic
they tracked, the unread indicator was incremented. To get around
this, we can just exclude the user who created the post from the
target users of the unread state message.
The second issue was related to the private message topic tracking
state, and was somewhat similar. Whenever a user created a new private
message, the New (X) indicator was incremented, and could not be
cleared until the page was refreshed. To solve this, we just don't
update the topic state for the user when the new_topic tracking state
message comes through if the user who created the topic is the
same as the current user.
cf. https://meta.discourse.org/t/bottom-of-topic-shows-there-is-1-unread-remaining-when-there-are-actually-0-unread-topics-remaining/220817
It used to show the warning that said only members of certain groups
could view the topic even if the group "everyone" was listed in
category's permission list.
This updates the fix in commit eb70ea4.
Co-authored-by: Osama Sayegh <asooomaasoooma90@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This PR will include `suspended` attribute in post serializer to check it in post widget and add a CSS class name.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The main difference is that Sprockets 4.0 no longer tries to compile everything by default. This is good for us, because we can remove all our custom 'exclusion' logic which was working around the old sprockets 3.0 behavior.
The other big change is that lambdas can no longer be added to the `config.assets.precompile` array. Instead, we can do the necessary globs ourselves, and add the desired files manually.
A small patch is required to make ember-rails compatible. Since we plan to remove this dependency in the near future, I do not intend to upstream this change.
I have compared the `bin/rake assets:precompile` output before and after this change, and verified that all files are present.
The error would happen when emoji_autocomplete_min_chars site setting is set to anything superior to 0, in this case until we reach the min chars length, emojiSearch would return "skip" and the code was currently expecting an array.
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
The main difference is that Sprockets 4.0 no longer tries to compile everything by default. This is good for us, because we can remove all our custom 'exclusion' logic which was working around the old sprockets 3.0 behavior.
The other big change is that lambdas can no longer be added to the `config.assets.precompile` array. Instead, we can do the necessary globs ourselves, and add the desired files manually.
A small patch is required to make ember-rails compatible. Since we plan to remove this dependency in the near future, I do not intend to upstream this change.
I have compared the `bin/rake assets:precompile` output before and after this change, and verified that all files are present.
`Scoped order is ignored, it's forced to be batch order.`
`find_each` ignores the `order` scope and triggers a warning in
production which is noisy.
Follow-up to 7a284164ce
This commit improves the logic for rolling up IPv4 screened IP
addresses and extending it for IPv6. IPv4 addresses will roll up only
up to /24. IPv6 can rollup to /48 at most. The log message that is
generated contains the list of original IPs and new subnet.
All current browser treat the HTML document (not the body element) as
the scrollable document element. Hence in all current browsers,
`document.body.scrollTop` returns 0. This commit removes all usage of
this property, because it is effectively 0.
Co-authored-by: David Taylor <david@taylorhq.com>
* FEATURE: Let sites add a sitemap.xml file.
This PR adds the same features discourse-sitemap provides to core. Sitemaps are only added to the robots.txt file if the `enable_sitemap` setting is enabled and `login_required` disabled.
After merging discourse/discourse-sitemap#34, this change will take priority over the sitemap plugin because it will disable itself. We're also using the same sitemaps table, so our migration won't try to create it
again using `if_not_exists: true`.
Sometimes we need to update a _lot_ of ACLs on S3 (such as when secure media
is enabled), and since it takes ~1s per upload to update the ACL, this is
best spread out over many jobs instead of having to do the whole thing serially.
In future, it will be better to have a job that can be run based on
a column on uploads (e.g. acl_stale) so we can track progress, similar
to how we can set the baked_version to nil to rebake posts.
Firefox does not support window.ClipboardItem yet (it is behind
a flag (dom.events.asyncClipboard.clipboardItem) as at version 87.)
so we need to fall back to the normal non-async clipboard copy, that
works in every browser except Safari.
This commit also tests the clipboardCopyAsync function by stubbing out
the clipboard on the window.navigator.
This fixes an issue in the discourse-chat plugin, where the
"Quote in Topic" button errored in Firefox.
After this commit, category group permissions can only be seen by users
that are allowed to manage a category. In the past, we inadvertently
included a category's group permissions settings in `CategoriesController#show`
and `CategoriesController#find_by_slug` endpoints for normal users when
those settings are only a concern to users that can manage a category.
The permissions for the 'everyone' group were not serialized because
the list of groups a user can view did not include it. This bug was
introduced in commit dfaf9831f7.
These were originally very similar, but have diverged over time. This makes it very difficult to manage styling.
This commit moves the noscript header and footer into partials so they can be reused in both the crawler view and the `<noscript>` view. It also makes browser-update render the noscript content **instead of** the `<section id='main'>`, rather than adding adding the noscript inside the `<section>`. This provides better parity with the server-rendered crawler view.
- Ensure the set of rendered `<link rel=stylesheet>` tags is consistent
- Add var() references for all crawler-view styles. Basic color definitions are defined first, as a fallback for super old browsers
The test was dependent on a translation string. Under certain seeds, the translation string for `{{category-drop}}`'s `noCategoriesLabel` is broken. This is because the value is calculated the first time a `{{category-drop}}` is rendered during the suite. If that first time happens to be during a test which is messing with `I18n.translations`, then it will cache a broken value. Maybe this should be fixed in a future commit... but for now moving to `data-value` will make the `tags-test` more robust and will stop the flakiness.
Moderators don't have access to notifications of other users. So we shouldn't display the notifications tab on other user profiles for them.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Follow up to ac672cf. Fixes a
small issue with uppy-image-uploader where the Processing label
was shown for the whole upload. Also adds a couple of options to
pick-files-button to allow for it to be used in the uppy-image-uploader.
Also fixes an issue where the uppy-upload mixin was resetting prematurely
when all uploads in progress were complete, but it should have been doing
that on the uppy complete event instead.
This PR brings the `UppyUploadMixin` more into line with the `ComposerUppyUpload` mixin, by extending the `ExtendableUploader` . This also adds better tracking of and events for in progress uploads in the `UppyUploadMixin` for better UI interactions, and also opens up the use of `_useUploadPlugin` for the mixin, so anything implementing `UppyUploadMixin` can add extra uppy preprocessor plugins as needed.
This has been done as part of work on extracting uploads out of the chat composer. In future, we might be able to do the same for `ComposerUppyUpload`, getting rid of that mixin to standardise on `UppyUploadMixin` and have a separate `composer-uploads` component that lives alongside `composer-editor` like what we are doing in https://github.com/discourse/discourse-chat/pull/764
It's possible in Rails to map a single route to multiple controller
actions with different constraints. We do this in at least 1 place in
our application for the root route (/) to make it possible to change the
page that root route displays.
This means that if you get the list of routes of your application,
you'll get the same route for each time the route is defined. And if
there's an API scope for 2 (or more) controller actions that map to the
same route, the route will be listed twice in the Allowed URLs list of
the scope.
To prevent this, this PR adds the allowed URLs in a set so that
duplicate routes are automatically removed.
The Allowed URLs list of an API scope only includes routes that
constraint the format for the route to JSON. However, some routes define
no format constraints, but that doesn't mean they can't be used by an
API key.
This commit amends the logic for the Allowed URLs list so that it
includes routes that have no format constraints or the format
constraints include JSON.
Due to default CSP web workers instantiated from CDN based assets are still
treated as "same-origin" meaning that we had no way of safely instansiating
a web worker from a theme.
This limits the theme system and adds the arbitrary restriction that WASM
based components can not be safely used.
To resolve this limitation all js assets in about.json are also cached on
local domain.
{
"name": "Header Icons",
"assets" : {
"worker" : "assets/worker.js"
}
}
This can then be referenced in JS via:
settings.theme_uploads_local.worker
local_js_assets are unconditionally served from the site directly and
bypass the entire CDN, using the pre-existing JavascriptCache
Previous to this change this code was completely dormant on sites which
used s3 based uploads, this reuses the very well tested and cached asset
system on s3 based sites.
Note, when creating local_js_assets it is highly recommended to keep the
assets lean and keep all the heavy working in CDN based assets. For example
wasm files can still live on the CDN but the lean worker that loads it can
live on local.
This change unlocks wasm in theme components, so wasm is now also allowed
in `theme_authorized_extensions`
* more usages of upload.content
* add a specific test for upload.content
* Adjust logic to ensure that after upgrades we still get a cached local js
on save
There are still some, but those are in actual code that's used outside core, so the change there would need to go through the deprecation cycle. That's a task for another day.
Previously we only supported a single 'required tag group' for a category. This commit allows admins to specify multiple required tag groups, each with their own minimum tag count.
A new category_required_tag_groups database table replaces the existing columns on the categories table. Data is automatically migrated.
Previous to this change an optimisation stripped crawler content from
all mobile browsers.
This had a side effect that meant that when we dropped support for an old
mobile platform we would stop rendering topic and topic list pages.
The new implementation ensures we only perform the optimisation on modern
mobile browsers.
This patch removes some of our freedom patches that have been deprecated
for some time now.
Some of them have been updated so we’re not shipping code based on an
old version of Rails.
A while ago in 27b97e4 the
pick-files-input was added but only used once for data-explorer. This commit uses it
for the composer-editor, and cleans it up to be usable either via uppy
handling the uploads or with this component handling the uploads.
This can then be used in other places in the app and also for plugins.
All users are members of the EVERYONE group, but this group is special and
is omitted from the group_users table. When checking permission we need to
make sure we also add a bypass.
This also fixes a very buggy test in post_alerter, it was confirming the
broken behavior due to fabricator flow.
When it defined the tag group the everyone group automatically had full access
then the additional permission fabricated just added one more group. After
fix was made to code the test started failing. Fabricators can be risky.
Browsers automatically calculate an aspect ratio based on the width/height attributes of an `<img`. HOWEVER that aspect ratio only applies while the image is loading. Once loaded, it'll use the image's actual dimensions. This can cause things to jump around after loading. For example:
- if a user deliberately inserts false width/height
- the image fails to load (404)
- an optimised image is a few pixels different, due to a rounding when resizing
This decorator explicitly sets the `aspect-ratio` property so that things are consistent throughout the lifetime of all `<img` elements.
Invited users were allowed to accept invites without entering a
password. When this happened, instead of receiving an activation email,
they received a password reset email. Basically, a user could postpone
choosing a password until after registration.
Unfortunately, this led to a confusing user experience and this commit
attempts to fix that by making the client require a password. There is
a single case when users do not need to input a password: when they sign
up using an external authenticator and password field is completely
hidden. In this case, the third party handles the password logic.
Technically, invites can still be redeemed without a password, but that
functionality was kept to preserve backwards compatibility.
This did not work properly everytime because the destination URL was
saved in a cookie and that can be lost for various reasons. This commit
redirects the user to invited topic if it exists.
raw_html posts (i.e. those which are pulled as part of our comments integration) don't go through our markdown pipeline, so `upload://` URLs are not supported. Running pull_hotlinked_images will break any images in the post.
In future we may add support for pulling hotlinked images in these posts. But for now, disabling it will stop it breaking images.
When emailing a group inbox and including other support-type
emails (or even just regular ones with autoresponders) in the
CC field, each automated reply to the group inbox triggered
more emails to be sent out to all CC addresses to notify them
of the new reply, which in turn caused more automated emails
to be sent to the group inbox.
This commit fixes the issue by preventing any emails being sent
by the PostAlerter when the new post has an incoming email record
which is_auto_generated, which we detect in Email::Receiver.
Via the API it is possible to create a user with an integer username. So
123 instead of "123". This causes the following 500 error:
```
NoMethodError (undefined method `unicode_normalize' for 1:Integer)
app/models/user.rb:276:in `normalize_username'
```
See: https://meta.discourse.org/t/222281
Fixes the issue where making a user x as owner of a post doesn't
cause the concerned topic to be listed in new owner's `My Posts`
top menu filter
per https://meta.discourse.org/t/199369
`reject` method for `Reviewable` model is returning an array. So if we use `this.set` method to update `reviewables` attribute in controller then it replaces the model with an array of objects wrongly. This is now fixed by using the `setObjects` method of the model.
