The values in Discourse dropdown menus only come from admin-defined strings, not unsanitised end-user input, so this lack of escaping was not exploitable.
* hidden siteSetting to enable experimental sidebar
* user preference to enable experimental sidebar
* `experimental_sidebar_enabled` attribute for current user
* Empty glimmer component for Sidebar
Before this change, we were using the labels from the original chartData to the chart builder, and we would then apply our collapse function on each dataset which could change the labels and cause a mismatch.
This was very visible when using quarterly periods on consolidated pageviews.
Other things may have added things to the style attribute (e.g. the `image-aspect-ratio` decorator).
Unfortunately this is difficult to add a test for because `lazy-load-images` leans on the `onload` event. We have no control over image loading in tests, so race conditions would be very likely.
- Make proxy pass `x-forward...` headers, so that Rails can set the host/port correctly in the csp
- Make `testem.js` available on a route which is within the app's default CSP
There was an edge when a user re-quoted a nested quote that it would return an incorrect `full name` but the correct `username` for the original quote. This PR updates the logic to fall back to using the OP user's username.
The complexity of the changes required to allow for full names to be displayed on nested quotes far outweighs how rare quoting nested quotes is.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
This was causing unexpected behaviors on production builds. And also on firefox on local environnement, however the issues was slightly different.
- production chrome: colors don't load
- dev firefox: colors don't change when selecting a different color set
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
Commit 68497bddf2 implemented a function
to format durations in a medium format, similar to how durationTiny did.
The existent translation strings do not cover all cases and this commit
adds the missing translation strings.
1. When the select-kit body is rendered, it defaults to being displayed under the triggering select-kit header, unless...
there isn't enough space between the bottom of the select-kit header and the bottom of the viewport
&
there's enough space on top of the select-kit header, and in that case, we render it on top.
2. We give it a bit of padding on top, so it never renders below the header on the Z-axis.
14778ba52e/app/assets/javascripts/select-kit/addon/components/select-kit.js (L877-L884)
3. If there isn't enough space between the bottom of the viewport and the bottom of the select-kit header, and there isn't enough space between its top and the bottom of `d-header`, it renders at the bottom of the select-kit header.
In theory, number 3 above rarely ever happens. However, it can occur in the case of the user preferences page in combination with a large select-kit body (many categories).
The select-kit body then renders below the trigging select-kit header, but it's cut off. Users won't be able to see the entire select-kit body.
Here's an example
a719734d92.mp4
This PR adds a "prevent overflow" modifier to Popper. What it does is that it handles the case above.
If there's not enough space below the select-kit header or above it, render the select-kit body below the select-kit header BUT... anchor it to the bottom of the viewport.
Here's what that looks like
32cd1639bb.mp4
After this fix, even very large select-kit bodies will always be on the screen.
Please note that this PR has no impact on either number 1 or number 2 above, and those will continue to function as they currently do.
The only downside here is that the select-kit body might cover the select-kit header if it needs to be anchored at the bottom of the viewport, and it's very large. However, between that and not being able to see all the options, I think it's a fair compromise. There's only so much space in the viewport.
This PR ignores mobile because we have a different placement strategy. We use `position: absolute`... so, users can scroll the viewport if needed.
This commit fixes two issues at play. The first was introduced
in f6c852b (or maybe not introduced
but rather revealed). When a user posted a new message in a topic,
they received the unread topic tracking state MessageBus message,
and the Unread (X) indicator was incremented by one, because with the
aforementioned perf commit we "guess" the correct last read post
for the user, because we no longer calculate individual users' read
status there. This meant that every time a user posted in a topic
they tracked, the unread indicator was incremented. To get around
this, we can just exclude the user who created the post from the
target users of the unread state message.
The second issue was related to the private message topic tracking
state, and was somewhat similar. Whenever a user created a new private
message, the New (X) indicator was incremented, and could not be
cleared until the page was refreshed. To solve this, we just don't
update the topic state for the user when the new_topic tracking state
message comes through if the user who created the topic is the
same as the current user.
cf. https://meta.discourse.org/t/bottom-of-topic-shows-there-is-1-unread-remaining-when-there-are-actually-0-unread-topics-remaining/220817
This updates the fix in commit eb70ea4.
Co-authored-by: Osama Sayegh <asooomaasoooma90@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
