When the `tags_listed_by_group` site setting is enabled, we were seeing
the N+1 queries problem when multiple `TagGroup` records are listed.
This commit fixes that by ensuring that we are not filtering through the
`tags` association after the association has been eager loaded.
Added in c2013865d7,
this migration was supposed to only turn off the hashtag
setting for existing sites (since that was the old default)
but its doing it for new ones too because we run all migrations
on new sites.
Instead, we should only run this if the first migration was
only just created, meaning its a new site.
In "GlobalSetting.redirect_avatar_requests" mode, when the application gets
an avatar request it returns a "redirect" to the S3 CDN.
This shields the application from caching avatars and downloading from S3.
However clients will make 2 requests per avatar. (one to get redirect,
second to get avatar)
A one hour cache on a redirect means there may be an increase in CDN
traffic, given more clients will ask for the redirect every hour.
This may also lead to an increase in origin requests to the application.
To mitigate lets cache the CDN URL for 1 day.
The downside is that any changes to S3 CDN need extra care to allow for
the extra 1 day delay. (leave data around for 1 extra day)
If a secure upload's access_control_post was trashed, and an anon user
tried to look at that upload, they would get a 500 error rather than
the correct 403 because of an error inside the PostGuardian logic.
We show live user status on mentions starting from a76d864. But status didn’t appear on the post that appears on the bottom of the topic just after a user posted it (status appeared only after page reloading). This adds status to just posted posts.
A few specs in `dashboard_controller_spec.rb` set some state in redis but don't clean it up afterwards which causes other specs to fail when they're ran after `dashboard_controller_spec.rb`.
Related commit: 18467d4.
Featured topics are eventually serialized by `ListableTopicSerializer`
which calls `Topic#image_url` which requires us to preload
`Topic#topic_thumbnails`.
At the time of writing, this is how the `TopicPosterSerializer` looks
like:
```
class TopicPosterSerializer < ApplicationSerializer
attributes :extras, :description
has_one :user, serializer: PosterSerializer
has_one :primary_group, serializer: PrimaryGroupSerializer
has_one :flair_group, serializer: FlairGroupSerializer
end
```
Within `PosterSerializer`, the `primary_group` and `flair_group`
association is requested on the `user` object. However, the associations
have not been loaded on the `user` object at this point leading to the
N+1 queries problem. One may wonder
why the associations have not been loaded when the `TopicPosterSerializer`
has `has_one :primary_group` and `has_one :flair_group`. It turns out that `TopicPoster`
is just a struct containing the `user`, `primary_group` and
`flair_group` objects. The `primary_group` and `flair_group`
ActiveRecord objects are loaded seperately in `UserLookup` and not preloaded when querying for
the users. This is done for performance reason so that we are able to
load the `primary_group` and `flair_group` records in a single query
without duplication.
It was redefining rather than including them. It was causing this warning:
```
WARNING: Shared example group suspension of active user possible was defined without a block and will have no effect. Please define a block or remove the definition
```
* UX: Wizard Step Enhancements
- Remove illustrations
- Add Emoji graphic to top of steps
- Add description below step title
- Move point of contact to last step
* Move step count to header, plus some button navigation tweaks
* add remaining emoji to step headers
* fix button logic on steps
* Update Point of Contact
* remove automated messages field
* adjust styling for counter, title, and emoji
* Update wording for logos
* Fix tests
* fix prettier
* fix specs
* set same with for steps except for styling screen
* use sentence case; remove duplicate copy under your organization fields
* fix missing buttons on small screens
* add spacing to buttons; adjust font weight to labels
* adjust styling for community logo step; use sentence case for button
* update copy for point of contact text helper
* use sentence case for field labels
* fix ui tests
* use btn-back class to fix ui tests
* reduce bottom margin for toggle fields
* clean up
Co-authored-by: Ella <ella.estigoy@gmail.com>
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
We were changing the user's user_option.bookmark_auto_delete_preference
to whatever they changed it to in the bookmark modal to use as default
for future bookmarks. However this was leading to a lot of confusion
since if you wanted to set it for one bookmark you had to remember to
change it back on the next one.
This commit removes that automatic functionality, and instead moves
the bookmark auto delete preference to User Preferences > Interface
in an explicit dropdown.
This commit adds a new notification that gets sent to admins when the site gets new features after an upgrade/deploy. Clicking on the notification takes the admin to the admin dashboard at `/admin` where they can see the new features under the "New Features" section.
Internal topic: t/87166.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
When user is watching category or tag (watching or watching first post) notifications are moved to other tab.
To achieve that and distinguish between post create to directly watched topics and indirectly watched topics, new notification type called `watching_category_or_tag` was introduced.
* FEATURE: Show similar users when penalizing a user
Moderators will be notified if other users with the same IP address
exist before penalizing a user.
* FEATURE: Allow staff to penalize multiple users
This allows staff members to suspend or silence multiple users belonging
to the same person.
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
The default behavior for Rails is to vary the response of an endpoint based on the `Accept:` header, and therefore it returns a `Vary:` header on responses. This instructs browsers and intermediate proxies to key their caches based on the value of the request's `Accept` header. In some cases (e.g. Akamai), the presence of a `Vary` header is enough to prevent caching entirely.
This commit restructures the Rails route definitions so that:
1. The "format" segment of the route is 'required'
2. The "format" segment of the route is constrained to a single value (e.g. `js` or `css`)
Now that the routes are guaranteed to have a `:format` segment, Rails will always prioritize that over the `Accept` header, and will therefore omit the `Vary` header.
Request specs are also added to test this behaviour for both stylesheets and theme-javascripts.
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
* FEATURE: Show warning if group cannot be mentioned
A similar warning is displayed when the user cannot be mentioned because
they have not been invited to the topic.
* FEATURE: Resolve mentions for new topic
This commit improves several improvements and refactors
/u/is_local_username route to a better /composer/mentions route that
can handle new topics too.
* FEATURE: Show warning if only some are notified
Sometimes users are still notified even if the group that was mentioned
was not invited to the message. This happens because its members were
invited directly or are members of other groups that were invited.
* DEV: Refactor _warnCannotSeeMention
When uploads are stored on S3, by default Discourse will fetch the avatars and proxy them through to the requesting client. This is simple, but it can lead to significant inbound/outbound network load in the hosting environment.
This commit adds an optional redirect_avatar_requests GlobalSetting. When enabled, requests for user avatars will be redirected to the S3 asset instead of being proxied. This adds an extra round-trip for clients, but it should significantly reduce server load. To mitigate that extra round-trip for clients, a CDN with 'follow redirect' capability could be used.
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
I'm hesitant to call this a performance improvement since claiming a
reviewable is probably rare. However, this commit cuts out two DB
queries each time we have to publish a reviewable claimed message. More
importantly, publishing to groups scales much better than publishing to
users because we esstentially cap the number ids we have to load into
memory.
This adds API scope for the user status. This also adds a get method to the user status controller. We didn't need a dedicated method that returns status before because the server returns status with user objects, but I think we need to provide this method for API clients.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
