When finding the candidates for `Topic.similar_to`, we will now ignore
topics in categories where `Category#search_priority` has been set to
ignore and also topics in categories which the user has specifically
muted.
Internal Ref: /t/87132
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
When a screened IP address is matched because it is either blocked or
allowed it should update match_count. This did not work because it
tried to validate the IP address and it failed as it matched with
itself.
Follow-up to 6357a3ce33
where we allowed a general API key scope for user status
GET/PUT/DELETE, this commit allows the same for the
UserApiKey system.
Previously we would trigger the event before the `Topic#deleted_at`
column has been updated making it hard for plugins to correctly work
with the model when its new state has not been persisted in the
database.
* FIX: Only modify secured sidebar links on user promotion/demotion
If a user is created populate their sidebar with the default
categories/tags that they have access to.
If a user is promoted to admin populate any new categories/tags that
they now have access to.
If an admin is demoted remove any categories/tags that they no longer
have access to.
This will only apply for "secured" categories. For example if these are
the default sitebar categories:
- general
- site feedback
- staff
and a user only has these sidebar categories:
- general
when they are promoted to admin they will only receive the "staff"
category. As this is a default category they didn't previously have
access to.
* Add spec, remove tag logic on update
Change it so that if a user becomes unstaged it used the "add" method
instead of the "update" method because it is essentially following the
on_create path.
On admin promotion/demotion remove the logic for updating sidebar tags because
we don't currently have the tag equivalent like we do for User.secure_categories.
Added the test case for when a user is promoted to admin it should
receive *only* the new sidebar categories they didn't previously have
access to. Same for admin demotion.
* Add spec for suppress_secured_categories_from_admin site setting
* Update tags as well on admin promotion/demotion
* only update tags when they are enabled
* Use new SidebarSectionLinkUpdater
We now have a SidebarSectionLinkUpdater
that was introduced in: fb2507c6ce
* remove empty line
The centralization helps in reducing code duplication in our code base
and more importantly, centralizing logic for guardian checks into a
single spot.
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
This PR adds separate notification indicators for PMs and reviewables that have arrived since the last time the user opened the notifications menu.
The PM indicator is the strongest one of all three indicators followed by the reviewable indicator and then finally the blue indicator. This means that if there's a new PM and a new reviewable, then the PM indicator will be shown.
Meta topic: https://meta.discourse.org/t/no-green-or-red-notification-bubbles/242783?u=osama.
Internal topic: t/82995.
While load testing our user creation code path in production, we
identified that executing the DB statement to update the `Group#user_count` column within a
transaction is creating a bottleneck for us. This is because the
creation of a user and addition of the user to the relevant groups are
done in a transaction. When we execute the DB statement to update
`Group#user_count` for the relevant group, a row level lock is held
until the transaction completes. This row level lock acts like a global
lock when the server is creating users that will be added to the same
group in quick succession.
Instead of updating the counter cache within a transaction which the
default ActiveRecord `counter_cache` option does, we simply update the
counter cache outside of the committing transaction.
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
This commit introduce a new API for registering callbacks, which we'll execute when a user gets destroyed, and the `delete_posts` opt is true. The chat plugin registers one callback and queues a job to destroy every message from that user in batches.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
This adds API scope for the user status. This also adds a get method to the user status controller. We didn't need a dedicated method that returns status before because the server returns status with user objects, but I think we need to provide this method for API clients.
Update `release_notes_link` to current version
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in
JavaScript). If your code does not include test coverage, please include
an explanation of why it was omitted. -->
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
The hidden site setting `suppress_secured_categories_from_admin` will
suppress visibility of categories without explicit access from admins
in a few key areas (category drop downs and topic lists)
It is not intended to be a security wall since admins can amend any site
setting. Instead it is feature that allows hiding the categories from the
UI.
Admins will still be able to see topics in categories without explicit
access using direct URLs or flags.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
When opening the invite acceptance page when the user
was already logged in, we were still showing the Accept
Invitation prompt even if the user had already redeemed
the invitation and was present in the `InvitedUser` table.
This would lead to errors when the user clicked on the button.
This commit fixes the issue by hiding the Accept Invitation
button and showing an error message instead indicating that
the user had already redeemed the invitation. This only applies
to multi-use invite links.
When this report in the admin dashboard has lots of data ( > 75 days of activity), the dates were ordered incorrectly. This is apparently expected behaviour; when using GROUP BY without specifying the ordering, PG decides to order, and it so happens that it works under some conditions but not others. Explicit ordering fixes the problem.
However, because this works in some conditions but not others, we can't really add a useful test.
* DEV: Add utility to hide all user tips
* DEV: Add UserTip Glimmer component
* DEV: Add tests for existing user tips
* FEATURE: Add user tip for post menu
* FEATURE: Add user tip for topic notification level
* FEATURE: Add user tip for suggested topics
* FEATURE: Hide new popups for existing users
We were doing get on Redis two times for each emoji while building the custom/standard/all lists which where resulting in ~3710 Redis calls. Given the emoji DB file is loaded in memory while we build/cache the emojis list this is unnecessary and slow.
As a simplification in pseudo code here is an explanation of what we were doing:
```ruby
emojis.each |emoji_name|
aliases = get_aliases_from_redis_cache(emoji_name)
is_tonable = get_is_tonable_from_redis_cache(emoji_name)
build_emoji(emoji_name, aliases, is_tonable)
end
```
The two redis calls are now simplified to a simple hash access: `@db[emoji_name]`
This commit adds some protections in InviteRedeemer to ensure that email
can never be nil, which could cause issues with inviting the invited
person to private topics since there was an incorrect inner join.
If the email is nil and the invite is scoped to an email, we just use
that invite.email unconditionally. If a redeeming_user (an existing
user) is passed in when redeeming an email, we use their email to
override the passed in email. Otherwise we just use the passed in
email. We now raise an error after all this if the email is still nil.
This commit also adds some tests to catch the private topic fix, and
some general improvements and comments around the invite code.
This commit also includes a migration to delete TopicAllowedUser records
for users who were mistakenly added to topics as part of the invite
redemption process.
Currently, we have available three 2fa methods:
- Token-Based Authenticators
- Physical Security Keys
- Two-Factor Backup Codes
If the first two are deleted, user lose visibility of their backup codes, which suggests that 2fa is disabled.
However, when they try to authenticate, the account is locked, and they have to ask admin to fix that problem.
This PR is fixing the issue. User still sees backup codes in their panel and can use them to authenticate.
In next PR, I will improve UI to clearly notify the user when 2fa is fully disabled and when it is still active.
This commit automatically ensures that category channels
have slugs when they are created or updated based on the
channel name, category name, or existing slug. The behaviour
has been copied from the Category model.
We also include a backfill here with a simplified version
of Slug.for with deduplication to fill the slugs for already
created Category chat channels.
The channel slug is also now used for chat notifications,
and for the UI and navigation for chat. `slugifyChannel`
is still used, but now does the following fallback:
* Uses channel.slug if it is present
* Uses channel.escapedTitle if it is present
* Uses channel.title if it is present
In future we may want to remove this altogether
and always rely on the slug being present, but this
is currently not possible because we are not generating
slugs for DM channels at this point.
* Remove old bookmark column ignores to follow up b22450c7a8
* Change some group site setting checks to use the _map helper
* Remove old secure_media helper stub for chat
* Change attr_accessor to attr_reader for preloaded_custom_fields to follow up 70af45055a
It is likely that a new admin user was created as just a regular user
before being promoted to admin so this change will update the sidebar
link records for any users that are promoted to admin. This way if any
of the default side bar categories or tags are restricted to admins
these new admins will have those added to their sidebar as well.
You can easily replicate this issue locally (prior to this fix) by using
`rails admin:create` where it creates a user first, then it is promoted
to admin. This means it would receive the default categories of regular
user, but never receive the ones they should have access to as an admin.
As part of this change I did drop the `!` from
`SidebarSectionLink.insert_all` so that it would add any new records
that were missing, but not throw a unique constraint error trying to add
any existing records.
Follow up to: 1b56a55f50
And: e320bbe513
Previously, we didn't have a site-wide setting to set the default behavior for user profile visibility and user presence features. But we already have a user preference for that.
This commit fixes a regression introduced in 8979adc where under certain conditions the groups syncing logic in Discourse Connect would try to add users to groups they're already members of and cause errors when users try to sign in using Discourse Connect.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Before this commit, there was no way for us to efficiently check an
array of topics for which a user can see. Therefore, this commit
introduces the `TopicGuardian#can_see_topic_ids` method which accepts an
array of `Topic#id`s and filters out the ids which the user is not
allowed to see. The `TopicGuardian#can_see_topic_ids` method is meant to
maintain feature parity with `TopicGuardian#can_see_topic?` at all
times so a consistency check has been added in our tests to ensure that
`TopicGuardian#can_see_topic_ids` returns the same result as
`TopicGuardian#can_see_topic?`. In the near future, the plan is for us
to switch to `TopicGuardian#can_see_topic_ids` completely but I'm not
doing that in this commit as we have to be careful with the performance
impact of such a change.
This method is currently not being used in the current commit but will
be relied on in a subsequent commit.
Discourse Connect can be used to manage group memberships of users by including a `add_groups`, `remove_groups` or `groups` attribute in the Discourse Connect payload. However, additions/deletions of users from groups aren't logged to the groups logs (available at `/g/<group>/manage/logs`) which can cause confusions to admins they try to figure out when/how users were added or removed from a group. This commit makes Discourse Connect add entries to the groups logs when it makes changes to users' group memberships.
