Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
Same issue as 28b00dc6fc, the
Mocha::ExpectationError inherits from Exception instead
of StandardError so RspecErrorTracker does not show the
actual failed expectation in request specs, the status of
the response is just 500 with no further detail.
This commit adds the RailsMultisite middleware in test mode when Rails.configuration.multisite is true. This allows for much more realistic integration testing. The `multisite_spec.rb` file is rewritten to avoid needing to simulate a middleware stack.
* DEV: Output webmock errors in request specs
In request specs, if you had not properly mocked an external
HTTP call, you would end up with a 500 error with no further
information instead of your expected response code, with an
rspec output like this:
```
Failures:
1) UploadsController#generate_presigned_put when the store is external generates a presigned URL and creates an external upload stub
Failure/Error: expect(response.status).to eq(200)
expected: 200
got: 500
(compared using ==)
# ./spec/requests/uploads_controller_spec.rb:727:in `block (4 levels) in <top (required)>'
# ./spec/rails_helper.rb:280:in `block (2 levels) in <top (required)>'
```
This is not helpful at all when you want to find what you actually
failed to mock, which is shown straight away in non-request specs.
This commit introduces a rescue_from block in the application
controller to log this error, so we have a much nicer output that
helps the developer find the issue:
```
Failures:
1) UploadsController#generate_presigned_put when the store is external generates a presigned URL and creates an external upload stub
Failure/Error: expect(response.status).to eq(200)
expected: 200
got: 500
(compared using ==)
# ./spec/requests/uploads_controller_spec.rb:727:in `block (4 levels) in <top (required)>'
# ./spec/rails_helper.rb:280:in `block (2 levels) in <top (required)>'
# ------------------
# --- Caused by: ---
# WebMock::NetConnectNotAllowedError:
# Real HTTP connections are disabled. Unregistered request: GET https://s3-upload-bucket.s3.us-west-1.amazonaws.com/?cors with headers {'Accept'=>'*/*', 'Accept-Encoding'=>'', 'Authorization'=>'AWS4-HMAC-SHA256 Credential=some key/20211101/us-west-1/s3/aws4_request, SignedHeaders=host;user-agent;x-amz-content-sha256;x-amz-date, Signature=test', 'Host'=>'s3-upload-bucket.s3.us-west-1.amazonaws.com', 'User-Agent'=>'aws-sdk-ruby3/3.121.2 ruby/2.7.1 x86_64-linux aws-sdk-s3/1.96.1', 'X-Amz-Content-Sha256'=>'test', 'X-Amz-Date'=>'20211101T035113Z'}
#
# You can stub this request with the following snippet:
#
# stub_request(:get, "https://s3-upload-bucket.s3.us-west-1.amazonaws.com/?cors").
# with(
# headers: {
# 'Accept'=>'*/*',
# 'Accept-Encoding'=>'',
# 'Authorization'=>'AWS4-HMAC-SHA256 Credential=some key/20211101/us-west-1/s3/aws4_request, SignedHeaders=host;user-agent;x-amz-content-sha256;x-amz-date, Signature=test',
# 'Host'=>'s3-upload-bucket.s3.us-west-1.amazonaws.com',
# 'User-Agent'=>'aws-sdk-ruby3/3.121.2 ruby/2.7.1 x86_64-linux aws-sdk-s3/1.96.1',
# 'X-Amz-Content-Sha256'=>'test',
# 'X-Amz-Date'=>'20211101T035113Z'
# }).
# to_return(status: 200, body: "", headers: {})
#
# registered request stubs:
#
# stub_request(:head, "https://s3-upload-bucket.s3.us-west-1.amazonaws.com/")
#
# ============================================================
```
* DEV: Require webmock in application controller if rails.env.test
* DEV: Rescue from StandardError and NetConnectNotAllowedError
We weren't calling clear_all! for the rate limiter which
was the first problem, and the second problem was that it
is very odd to do state cleanup before tests instead of after,
so moved the disabling and clear_all! to after.
* Move onebox gem in core library
* Update template file path
* Remove warning for onebox gem caching
* Remove onebox version file
* Remove onebox gem
* Add sanitize gem
* Require onebox library in lazy-yt plugin
* Remove onebox web specific code
This code was used in standalone onebox Sinatra application
* Merge Discourse specific AllowlistedGenericOnebox engine in core
* Fix onebox engine filenames to match class name casing
* Move onebox specs from gem into core
* DEV: Rename `response` helper to `onebox_response`
Fixes a naming collision.
* Require rails_helper
* Don't use `before/after(:all)`
* Whitespace
* Remove fakeweb
* Remove poor unit tests
* DEV: Re-add fakeweb, plugins are using it
* Move onebox helpers
* Stub Instagram API
* FIX: Follow additional redirect status codes (#476)
Don’t throw errors if we encounter 303, 307 or 308 HTTP status codes in responses
* Remove an empty file
* DEV: Update the license file
Using the copy from https://choosealicense.com/licenses/gpl-2.0/#
Hopefully this will enable GitHub to show the license UI?
* DEV: Update embedded copyrights
* DEV: Add Onebox copyright notice
* DEV: Add MIT license, convert COPYRIGHT.txt to md
* DEV: Remove an incorrect copyright claim
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: jbrw <jamie@goatforce5.org>
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
It makes SimpleCov work with turbo_rspec and uses the default Rails
configuration (with some changes) to groups files by their type
(models, controllers, etc).
Previously it matched the behavior of standard ActiveRecord after_commit callbacks. They do not work well within `joinable: false` nested transactions. Now `DB.after_commit` callbacks will only be run when the outermost transaction has been committed.
Tests always run inside transactions, so this also introduces some logic to run callbacks once the test-wrapping transaction is reached.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
We removed pry-nav a while back because it is not up to date with pry but it is super useful. Luckily pry-byebug is here to save us all from Satan's power.
To get this to work you need to add the following to your $HOME/.pryrc file.
```
if defined?(PryByebug)
Pry.commands.alias_command 'c', 'continue'
Pry.commands.alias_command 's', 'step'
Pry.commands.alias_command 'n', 'next'
Pry.commands.alias_command 'f', 'finish'
end
Pry::Commands.command /^$/, "repeat last command" do
pry_instance.run_command Pry.history.to_a.last
end
```
The require-ing of pry, pry-rails, and pry-byebug in specs is controlled by the IMPROVED_SPEC_DEBUGGING flag (disabled by default).
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* FIX: randomize file name when created from fixtures
When a temporary file is created from fixtures it should have a unique name.
It is to prevent a collision in parallel specs evaluation
* FIX: use /tmp/pid folder to keep fixture files
Use a helper method to simplify creating a new register. Previously this would require creating lots of different methods manually, and adding every register to the clear/reset functions
Latest version of Rails contains compatibility fixes for Ruby 2.7 and some
minor security fixes we would like to have
It also broke some of the multisite tests.
Rails tries to use the same connection for reading from a replica as writing
to the leader during tests, because, with everything happening in a
transaction, changes to the DB wouldn't otherwise be reflected in the
replica connection.
The difference now is that Rails tries to do this for connections opened
after the test has started which affected rails multisite connections.
The upshot of this is that, as things stand, you are likely to
experience problems if you try to connect to a different multisite DB in
a test when the `current_db` is not 'default'.
This should catch a few scenarios which can waste a lot of time in development
- Forgetting to run migrations
- Missing plugin migrations
- Missing post_deploy migrations
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
* Updated test-prof
* Made rails_helper.rb use new test-prof APIs
Instead of the previous temporary hacks.
* Added environment option to disable prefabrication
It was removed mistakenly
Before: 6:05
After: 5:42
Featuring topics for `list/categories` is a very expensive operation that
happened each time we created a topic. This introduces a test only bypass
* Introduced fab!, a helper that creates database state for a group
It's almost identical to let_it_be, except:
1. It creates a new object for each test by default,
2. You can disable it using PREFABRICATION=0
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
Previously we would bypass touching `Topic.updated_at` for whispers and post
recovery / deletions.
This meant that certain types of caching can not be done where we rely on
this information for cache accuracy.
For example if we know we have zero unread topics as of yesterday and whisper
is made I need to bump this date so the cache remains accurate
This is only half of a larger change but provides the groundwork.
Confirmed none of our serializers leak out Topic.updated_at so this is safe
spot for this info
At the moment edits still do not change this but it is not relevant for the
unread cache.
This commit also cleans up some specs to use the new `eq_time` matcher for
millisecond fidelity comparison of times
Previously `freeze_time` would fudge this which is not that clean.
It is not a setting, and only relevant in specs. The new API is:
```
Jobs.run_later! # jobs will be thrown on the queue
Jobs.run_immediately! # jobs will run right away, avoid the queue
```
SiteSettingExtension triggers message bus which re-establishes a
DB connection in `SiteSettingExtension#process_message`. That happens
concurrently and a test that requires a connection to the db will
fail when the reconnection is happening.
