Dismissing admin notices is an admin-only action. This is enforced on the back-end both by a routing constraint and a policy in the relevant service.
However, we still unconditionally display the "Dismiss" button to anyone with access to the admin dashboard. When clicked, it results in a 404 modal (due to the routing constraint.)
With this change we only render the dismiss button for admins.
When a post has some replies, and the user click on the button to show them, we would load ALL the replies. This could lead to DoS if there were a very large number of replies.
This adds support for pagination to these post replies.
Internal ref t/129773
FIX: Duplicated parent posts
DEV: Query refactor
I think the check for the bookmark icon is too optimistic,
so the DB might not be updated by the time we check. Using
try_until_success should fix this, we also don't have a
toast to check against via AJAX success, by design.
After #28603, the options "agree and suspend" and "agree and silence" in the review queue weren't working. This was happening because the optionalService, when used as a decorator, needs a name argument to work properly. We were also lacking tests for this.
his is a new feature that lets admins dismiss notices from the dashboard. This helps with self-service in cases where a notice is "stuck", while we work on provisions to prevent "sticking" in the first place.
Adds support for `input-date` field when calling
`fill_in` on a FormKit field. Capybara supports passing
a Date object to `fill_in(with: value)` for date inputs,
so there is nothing fancy that needs to be done to support this.
Currently, when the custom flag has the same name as the system flag (which is disabled) then it is not displayed. To fix the problem, `custom_` prefix as `name_key` is used to distinguish between the system and the custom flag.
I considered writing a migration to fix existing custom flags name key. However, at the end of migration I would need to run rails code to reset cache `Flag.reset_flag_settings!`. I decided to skip that step as it is a very edge case. If someone has the same flag name as the system flag, then all they have to do is edit the flag and click save.
In addition, I made 2 small fixes:
- edit flag title was missing translation;
- flag form UI was not showing that description is the required field.
### UI changes
All of the UI changes described are gated behind the `use_legacy_pageviews`
site setting.
This commit changes the admin dashboard pageviews report to
use the "Consolidated Pageviews with Browser Detection" report
introduced in 2f2da72747 with
the following changes:
* The report name is changed to "Site traffic"
* The pageview count on the dashboard is counting only using the new method
* The old "Consolidated Pageviews" report is renamed as "Consolidated Legacy Pageviews"
* By default "known crawlers" and "other" sources of pageviews are hidden on the report
When `use_legacy_pageviews` is `true`, we do not show or allow running
the "Site traffic" report for admins. When `use_legacy_pageviews` is `false`,
we do not show or allow running the following legacy reports:
* consolidated_page_views
* consolidated_page_views_browser_detection
* page_view_anon_reqs
* page_view_logged_in_reqs
### Historical data changes
Also part of this change is that, since we introduced our new "Consolidated
Pageviews with Browser Detection" report, some admins are confused at either:
* The lack of data before a certain date , which didn’t exist before
we started collecting it
* Comparing this and the current "Consolidated Pageviews" report data,
which rolls up "Other Pageviews" into "Anonymous Browser" and so it
appears inaccurate
All pageview data in the new report before the date where the _first_
anon or logged in browser pageview was recorded is now hidden.
This upgrade is designed to be fully backwards-compatible. Any icon names which have changed will be automatically remapped to the new name. For now, this will happen silently. In future, once core & official themes/plugins have been updated, we will start raising deprecation errors to help theme/plugin authors update their code.
Extracted from https://github.com/discourse/discourse/pull/28715
Announcement at https://meta.discourse.org/t/were-upgrading-our-icons-to-font-awesome-6/325349
Co-authored-by: awesomerobot <kris.aubuchon@discourse.org>
This commit adds a link to the top of the new /about page, shown to admins only, to allow them to easily navigate to `/admin/config/about` where they can edit the /about page.
Internal topic: t/137546.
A new setting attribute is used to define the areas (separated by `|`).
In addition, endpoint `/admin/config/site_settings.json` accepts new `filter_area` data.
A previous refactor has moved this function in the controller instead of the route making it inaccessible to the modal.
This commit is fixing this and also adding a spec.
This commit introduces a little bit of duplication
since the old plugin UIs not using the new plugin show
page look different from ones like AI and Gamification
which have been converted. We can use the new admin
header component on the plugins list, but for the other
pages we are manually rendering a breadcrumb trail and
the list of plugin tabs.
Over time as we convert more plugins to use the new UI
guidelines and show page we can get rid of this duplication.
We were not updating `searchTerm` when changing the input which was making us always send an empty q parameter.
This commit is also adding tests for:
- initial url with q param
- filtering the bookmarks through the input
Makes it easier to reach the group from the category security
tab, and moves the trash button to the right to avoid misclicks.
Also converts the category permission row to gjs
To test the restricted routing when filling up required fields, we fill up the field and then navigate to the root path and checking that we're not redirected.
This is somewhat flaky, and the screenshot shows we are back at the profile page, without any prompt to fill up fields.
My hypothesis is in cases where the backend is "slow" to respond, we're navigating away from the page before the request finishes (which will redirect back to the profile page.)
This PR adds an expectation after saving, to wait until the unrestricted profile page is rendered, before navigating away.
This commit changes the cutoff number for the admins and mods lists on the new /about page from 12 to 6. If the admins or mods lists are bigger than 6, the about page will display the 6 most recently seen admins/mods, and tuck the rest away behind a "view more" button.
Given we are a single-page-app, we hijack the browser's default behavior
for keyboard shortcuts like End because on long topics (20+ posts) we
need to load the last post before really reaching the end of the page.
However, when the last post is already rendered, the End shortcut
currently does nothing, it takes the user to the start of the last post.
If that post is too long, the user will have to scroll down manually.
This change ensures that if the last post of a topic is already rendered
(whether it is in the viewport or not), pressing End will take the user
to the very bottom of the page.
Note for the reviewer: the test added here is for the general case, it
is too hard to test the case where the last post is already rendered,
that isn't covered here.
Covers the use case of doing this in composer:
```javascript
page.execute_script("document.querySelector('.d-editor-input').setSelectionRange(6, 12);")
```
When searching for site texts for admin using the english
version of the text, previously we would show the english
version in the results _even if_ there was another locale
translated version available when a locale was selected
from the dropdown.
This commit adds a "Only show results in selected locale"
checkbox option which will instead make it so the results
shown are in the target locale, making it easier for translators
to tell when there is actually translations vs. missing tranlsations.
If there is a codec issue or something trying to process a video file
for thumbnail generation, uploads could hang indefinitely. This fix
ensures that we continue the upload process even if we encounter an
error trying to generate a thumbnail for it.
If you’re viewing a tag and you switch to a different tag via the sidebar or the tags dropdown, after expanding the info section of the tag page via the wrench button, the info section keeps showing the previous tag's details instead of the new one.
This happens because the tag info section makes an ajax request to load the tag's details, and this request is made inside the `didInsertElement` hook which is only fired once when the component is rendered. To fix this, we need to set the result from the ajax request to null and add a `didUpdateAttrs` hook to trigger another request to load the info of the new tag.
Internal topic: t/134809.
This change is preventing the "is dirty check" from happening when clicking delete on this form. This was not good UX and was also causing bugs by leaving the form in a unexpected state.
Previous to this change there is no clean way to apply keyboard shortcuts
to things such as "add poll" and other hidden options in the toolbar
This allows shortcuts to be specified similar to how they are on the toolbar
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
If we don't get a `videoWidth` back for a video don't try and generate a
thumbnail for it.
Also as part of this change I switched getImageData, the function
throwing the error, to use video.videoWidth instead of canvas.width
because it's very likely we were setting canvas.width too early before
the width could be read. Now that we are reading the value inside of the
setTimeout hopefully we will actually have a width. Just incase we don't
detect a width we will now exit early instead of throwing an error.
We only need to check for `0` and not null because the value is an
integer and will always return a 0 if it can't be read. https://developer.mozilla.org/en-US/docs/Web/API/HTMLVideoElement/videoWidth
See https://meta.discourse.org/t/322363
This commit implements 2 new metrics/stats in the /about page for the _estimated_ numbers of unique visitors from the EU and the rest of the world. This new feature is currently off by default, but it can be enabled by turning on the hidden `display_eu_visitor_stats` site settings via the rails console.
There are a number of assumptions that we're making here in order to estimate the number of unique visitors, specifically:
1. we're assuming that the average of page views per anonymous visitor is similar to the average number of page views that a logged-in visitor makes, and
2. we're assuming that the ratio of logged in visitors from the EU is similar to the ratio of anonymous visitors from the EU
Discourse keeps track of the number of both logged-in and anonymous page views, and also the number of unique logged-in visitors and where they're from. So with those numbers and the assumptions above, we can estimate the number of unique anonymous visitors from the EU and the rest of the world.
Internal topic: t/128480.
This commit introduces a new frontend API to add custom items to the "Site activity" section in the new /about page. The new API is called `addAboutPageActivity` and it works along side the `register_stat` serve-side API which serializes the data that the frontend API consumes. More details of how the two APIs work together is in the JSDoc comment above the API function definition.
Internal topic: t/128545/9.
This commit fixes a bug where the silence button is incorrectly displayed on the admin page of a staff user. It's not actually possible to silence a staff user because the backend correctly prevents it, but the frontend isn't checking if the button should be displayed.
Another small bug that this commit fixes is the similar users list not showing up inside the silence/suspend modals due to also a bug in the frontend.
I've also changed the way similar users are loaded so that they're not returned by the `admin/users#show` endpoint anymore and moved them into a new endpoint that the penalize modals (suspend and silence) can call directly to retrieve the list of users. This is done because the similar users list is never shown on the admin user page (`/admin/users/:user_id/:username`); they're only needed when the suspend or silence modals are opened.
Internal topic: t/130014.
This commit converts the Backups page in the admin interface
to follow our new admin interface guidelines.
As part of this work, I've also made `AdminPageHeader` and `AdminPageSubheader`
components that can be reused on any admin page for consistency, that handle
the title and action buttons and also breadcrumbs.
Also renamed `AdminPluginFilteredSiteSettings` to `AdminFilteredSiteSettings` since
it can be used generally to show a subset of filtered site settings, not only
settings for a plugin. Not sure if it's ideal to have to define a new route for this
for every config area, but not sure how else to do it right now.
This commit adds a blue dot next to the "What's New"
link in the admin sidebar if the user has not seen the
new features yet, as a followup to 3e5976f843
which removed the tab on the dashboard that had this same
functionality.
When the admin visits the "What's New" page they count
as having seen all the features straight away. This could
be something we want to change, but for now this keeps the
same functionality.
We used to show New Features in a tab on the dashboard,
but this could get pushed down the page especially on
our hosting. In 043117ca13
we made a separate What's New page, so this commit removes
the dashboard tab and changes the admin notification to
send the admin to /admin/whats-new instead of the dashboard
tab.
This commit fixes a bug in the redesigned about page where if there's no banner image configured for the page, the top of the page where the banner goes is occupied with large white space. Additionally, this commit also fixes a related bug in the admin config area for the /about page where it's not possible to remove the uploaded banner image.
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add sections for showing the site admins and moderators.
The lists of admins and moderators display the 10 most recently seen admins/moderators, with a button to display the rest of admins or moderators. Admins or moderators that have not logged in to the site in the last year will not be shown. Clicking on an admin's or moderator's name/avatar will show their user card.
In development, Ember raises an error when previously-used values are updated during a render. This is to avoid 'backtracking', where parts of templates have to be re-rendered multiple times. In general, this kind of pattern should be avoided, and Ember's warning helps us do that.
However, for the deprecation warning banner, it is quite reasonable for some rendering to trigger a deprecation, and thereby require the global-notice to be re-rendered. We can use our `DeferredTrackedSet` to achieve that. Its `.add` method will delay adding an item to the Set until after the current render has completed.
Very similar to move up/down flag problem fixed here - https://github.com/discourse/discourse/pull/28272
Those are the steps to toggle the flag:
1. click toggle - `saving` CSS class is added;
2. request to backend;
3. `saving` CSS class is removed.
And check if the flag was toggle was:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saving")
has_no_css?(".admin-flag-item.#{key}.saving")
end
```
If the save action is very fast, then the saving class is removed before the first check.
Therefore I decided to invert it, and once action is finished add `saved` CSS class.
Then we can have a quick positive check:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saved")
end
```
Those are the steps to move the flag:
1. open menu;
2. click move up - `saving` CSS class is added;
3. request to backend;
4. `saving` CSS class is removed.
To check if the action was finished we are using this method:
```
def move_up(key)
open_flag_menu(key)
find(".admin-flag-item__move-up").click
has_saved_flag?(key)
self
end
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saving")
has_no_css?(".admin-flag-item.#{key}.saving")
end
```
However, sometimes specs were failing with `expected to find CSS ".admin-flag-item.spam.saving" but there were no matches`
I think that the problem is with those 2 lines:
```
find(".admin-flag-item__move-up").click
has_closed_flag_menu?
```
If the save action is very fast, then the `saving` class is removed before the first check.
Therefore, to determine that the move action is finished, I am checking if the menu is closed.
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add the site age and a section on the right hand side to show site activities/statistics such as topics, posts, sign-ups, likes etc.
Admin can create up to 50 custom flags. It is limited for performance reasons.
When the limit is reached "Add button" is disabled and backend is protected by guardian.
In the formkit conversion in 2ca06ba236
we missed setting a type for the UppyImageUploader for badges. Also,
we were not passing down the `image_url` as form data, so when we used
`data.image` for that field the badge was not updating in the UI after
page loads and the image URL was not loading for preview.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
When we show user tips, we immediately send an AJAX request to mark the
tiup as seen. This is done in the background. However, when system tests
are run, sometimes that request is not completed before the test ends.
This causes the test to be flakey.
One way to fix this is to force the system test run to wait for the AJAX
request to complete. However, this is not ideal because it makes the
test suite slower on each run.
Instead, this commit removes the flakey assertion and adds an alternative
assertion in the frontend tests that ensures the background request is
sent when the user tip is shown.
Form Kit is our new form library/framework for unifying the way forms look across Discourse. The admin config area for the /about page is a new form that isn't currently used, so it makes sense for it to be one of the first forms to be migrated to Form Kit to test the library.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
- Ensure main title is set as 'not visible' when removed from DOM
- `deactivate` -> `willTransition` to ensure proper behavior when navigating between multiple topics
Followup to bdec564d14
- Move topic-title on-screen detection to intersection-observer (via new modifier), and add a boolean to header service which indicates whether it's on-screen
- Move scroll-direction from Mixin to dedicated service. Teach it to pause scroll monitoring while transitions are in progress, to avoid reporting false changes in scroll direction. Also resets to a 'neutral' state after each navigation, which indicates the the user has not yet scrolled
- When entering a topic view, notify the header service which post is being targeted. It can then make an educated guess about whether the topic title is likely to be in-view
- Update header service `topicInfoVisible` to be a declarative getter, based on the three refactored sources of truth mentioned above
- Update legacy widget header to use the header service for topic info
All of these changes mean that the header no longer 'flickers' when navigating into topics on mobile. As well as the improved UX, this should also improve our Cumulative Layout Shift (CLS) web vital metrics.
This commit promotes the new topic bulk action
menu introduced in 89883b2f51
to the main method of bulk selecting and performing
actions on topics. The site setting flag gating this
feature is deleted, and the old bulk select code is
deleted as well.
The new modal shows a loading spinner while operations
are taking place, allows selecting the action from a dropdown
instead of having a 2-step modal flow,
and also supports additional options for some operations, e.g.
allowing Close silently.
Replaces the existing topic map with the experimental-topic-map made by @awesomerobot.
---------
Co-authored-by: awesomerobot <kris.aubuchon@discourse.org>
This commit introduces the foundation for a new design for the /about page that we're currently working on. The current version will remain available and still be the default until we finish the new version and are ready to roll out. To opt into the new version right now, add one or more group to the `experimental_redesigned_about_page_groups` site setting and members in those groups will get the new version.
Internal topic: t/128545.
If a user has a required action, e.g. adding a 2FA method or filling in new required fields, we disable client-side routing except to allowed pages.
This led to a situation where a user might navigate away from e.g. the profile page to look at the new ToS, and then being "stuck" due to not knowing how to get back to accept the new terms.
This PR makes it so that if you click any restricted link, instead of doing nothing we transition the user back to the page where they can take the required action.
User actions can trigger functions that render changes to the screen within the same cycle (e.g. pressing the reply button will cause the login modal to pop up), potentially impacting performance and causing some jank on slower devices.
This change inserts runAfterFramePaint where certain actions are triggered. Below are some screenshots indicating an improved INP for some of the buttons affected on controls with the highest INPs. The two places where this is added help with several actions, e.g. user + group cards, generic button action usage.
This PR introduces FormKit, a component-based form library designed to simplify form creation and management. This library provides a single `Form` component, various field components, controls, validation mechanisms, and customization options. Additionally, it includes helpers to facilitate testing and writing specifications for forms.
1. **Form Component**:
- The main component that encapsulates form logic and structure.
- Yields various utilities like `Field`, `Submit`, `Alert`, etc.
**Example Usage**:
```gjs
import Form from "discourse/form";
<template>
<Form as |form|>
<form.Field
@name="username"
@title="Username"
@validation="required"
as |field|
>
<field.Input />
</form.Field>
<form.Field @name="age" @title="Age" as |field|>
<field.Input @type="number" />
</form.Field>
<form.Submit />
</Form>
</template>
```
2. **Validation**:
- Built-in validation rules such as `required`, `number`, `length`, and `url`.
- Custom validation callbacks for more complex validation logic.
**Example Usage**:
```javascript
validateUsername(name, value, data, { addError }) {
if (data.bar / 2 === value) {
addError(name, "That's not how maths work.");
}
}
```
```hbs
<form.Field @name="username" @validate={{this.validateUsername}} />
```
3. **Customization**:
- Plugin outlets for extending form functionality.
- Styling capabilities through propagated attributes.
- Custom controls with properties provided by `form` and `field`.
**Example Usage**:
```hbs
<Form class="my-form" as |form|>
<form.Field class="my-field" as |field|>
<MyCustomControl id={{field.id}} @onChange={{field.set}} />
</form.Field>
</Form>
```
4. **Helpers for Testing**:
- Test assertions for form and field validation.
**Example usage**:
```javascript
assert.form().hasErrors("the form shows errors");
assert.form().field("foo").hasValue("bar", "user has set the value");
```
- Helper for interacting with he form
**Example usage**:
```javascript
await formKit().field("foo").fillIn("bar");
```
5. **Page Object for System Specs**:
- Page objects for interacting with forms in system specs.
- Methods for submitting forms, checking alerts, and interacting with fields.
**Example Usage**:
```ruby
form = PageObjects::Components::FormKit.new(".my-form")
form.submit
expect(form).to have_an_alert("message")
```
**Field Interactions**:
```ruby
field = form.field("foo")
expect(field).to have_value("bar")
field.fill_in("bar")
```
6. **Collections handling**:
- A specific component to handle array of objects
**Example Usage**:
```gjs
<Form @data={{hash foo=(array (hash bar=1) (hash bar=2))}} as |form|>
<form.Collection @name="foo" as |collection|>
<collection.Field @name="bar" @title="Bar" as |field|>
<field.Input />
</collection.Field>
</form.Collection>
</Form>
```
The watch words controller creation function, create_or_update_word(), doesn’t validate the size of the replacement parameter, unlike the word parameter, when creating a replace watched word. So anyone with moderator privileges can create watched words with almost unlimited characters.
Handles the cases where the sections titles are Unicode only strings, allowing them to be expanded separately if the Unicode string contains letters.
Also prevents a sidebar section with the header hidden to be displayed collapsed.
Adds experimental_flags_admin_page_enabled_groups (default "")
to remove the Moderation Flags link from the admin sidebar for now,
there are still a few bugfixes that need to be done before we
are comfortable with turning this on more widely. This is
a _temporary_ flag, we will be removing this once the feature
is more stable.
If an existing user (John) accepts an invite created by Kenny to a group, John may be seen as invited by Kenny, despite already having an account on the site.
This fix removes the bug by excluding invites that determine the invited_by after the user's creation date. The delay buffer in the query accounts for invites that also create the user at the same time.
There's currently a race condition in the following spec:
65be7a7880/spec/system/admin_about_config_area_spec.rb (L70-L95)
where the form can be saved before the image uploader field has finished uploading the selected image and causing the assertion at line 94 to fail with the following error:
```
Failure/Error: expect(SiteSetting.about_banner_image.sha1).to eq(Upload.generate_digest(image_file))
NoMethodError:
undefined method `sha1' for nil
[Screenshot Image]: /__w/discourse/discourse/tmp/capybara/failures_r_spec_example_groups_admin_about_config_area_page_the_general_settings_card_can_saves_its_fields_to_their_corresponding_site_settings_312.png
~~~~~~~ JS LOGS ~~~~~~~
http://localhost:31338/assets/vendor.js 15902:14 "WARNING: uppy needs a unique id, pass one in to the component implementing this mixin"
~~~~~ END JS LOGS ~~~~~
./spec/system/admin_about_config_area_spec.rb:94:in `block (3 levels) in <main>'
./spec/rails_helper.rb:552:in `block (3 levels) in <top (required)>'
./spec/rails_helper.rb:552:in `block (2 levels) in <top (required)>'
./spec/rails_helper.rb:513:in `block (3 levels) in <top (required)>'
./spec/rails_helper.rb:503:in `block (2 levels) in <top (required)>'
./spec/rails_helper.rb:460:in `block (2 levels) in <top (required)>'
./vendor/bundle/ruby/3.3.0/gems/webmock-3.23.1/lib/webmock/rspec.rb:39:in `block (2 levels) in <top (required)>'
```
This PR fixes the problem by making the system test wait for the image to finish uploading (with 10 seconds timeout) before carrying out the rest of the system test.
Before checking if flags were reordered on the topic page, we need to ensure that the reorder action was finished. To achieve it "saving" CSS is added and removed when AJAX call is completed.
Followup 2f2da72747
This commit moves topic view tracking from happening
every time a Topic is requested, which is susceptible
to inflating numbers of views from web crawlers, to
our request tracker middleware.
In this new location, topic views are only tracked when
the following headers are sent:
* HTTP_DISCOURSE_TRACK_VIEW - This is sent on every page navigation when
clicking around the ember app. We count these as browser page views
because we know it comes from the AJAX call in our app. The topic ID
is extracted from HTTP_DISCOURSE_TRACK_VIEW_TOPIC_ID
* HTTP_DISCOURSE_DEFERRED_TRACK_VIEW - Sent when MessageBus initializes
after first loading the page to count the initial page load view. The
topic ID is extracted from HTTP_DISCOURSE_DEFERRED_TRACK_VIEW.
This will bring topic views more in line with the change we
made to page views in the referenced commit and result in
more realistic topic view counts.
I am changing many of these to notes or resolving them as is,
most of these I have not actively worked on in years so someone
else can work on them when we get to these areas again.
