When the user sees no results in their admin sidebar query,
we are adding two additional links:
* "Search site settings" - Navigates to the site settings page
with the filter prefilled in the search
* "Admin user list" - Navigates to the user list with the filter
prefilled in the username search
This will bridge the gap until we have a full admin-wide search.
Also make admin site setting search param refresh on filter changes
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This commit ensures that additional keywords for admin
sidebar links (which are also stored in the admin sidebar state
manager) are translated with I18n, which was discussed
in https://meta.discourse.org/t/introducing-experimental-admin-sidebar-navigation/289281/58?u=martin
This also changes the admin sidebar state manager keywords to
not be a TrackedObject -- this is not necessary as keywords are
only set once, and it was causing rendering issues because
the keywords were being set at the same time they were read.
Finally this adds a "theme" keyword to the "Components" link
because we often refer to components as Theme Components
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
To add a components link to the sidebar refactoring was required to create unique URLs for themes and components. Before the query param was used. After changes, we have two URLs `/admin/customize/themes` and `/admin/customize/components`.
Why this change?
Previously, we were preloading the necessary metadata for
`adminCustomizeThemes.show.schema` route in the
`adminCustomizeThemes.show` route. This is wasteful because we're
loading data upfront when the objects setting editor may not be used.
This change also lays the ground work for a future commit where we need
to be shipping down additional metadata which may further add to the
payload.
This commit changes the API for registering the plugin config
page nav configuration from a server-side to a JS one;
there is no need for it to be server-side.
It also makes some changes to allow for 2 different ways of displaying
navigation for plugin pages, depending on complexity:
* TOP - This is the best mode for simple plugins without a lot of different
custom configuration pages, and it reuses the grey horizontal nav bar
already used for admins.
* SIDEBAR - This is better for more complex plugins; likely this won't
be used in the near future, but it's readily available if needed
There is a new AdminPluginConfigNavManager service too to manage which
plugin the admin is actively viewing, otherwise we would have trouble
hiding the main plugin nav for admins when viewing a single plugin.
Currently, a new sidebar link for what's new and reports is going to the main dashboard page and activates the proper tab.
It might be problematic, especially, when the instance has a lot of problems. In that case, it would be difficult for admin to find reports or what’s new which is rendered at the bottom of the page.
Therefore separate pages for reports and what's new were created.
Reports were moved to a component that is shared between a separate page and the dashboard.
This commit fixes an issue where the following happens:
1. You open /admin as a member of the admin_sidebar_enabled_groups
1. You then click the chat icon in the header when you prefer to have
drawer open, or if you just minimise chat into drawer after it opens
fullscreen
1. You lose the admin sidebar panel, and are reset instead to the main
panel
Also included is a bit of refactoring to make it so the forcing of
admin sidebar state is in one place.
This commit makes it so the site settings filter controls and
the list of settings input editors themselves can be used elsewhere
in the admin UI outside of /admin/site_settings
This allows us to provide more targeted groups of settings in different
UI areas where it makes sense to provide them, such as on plugin pages.
You could open a single page for a plugin where you can see information
about that plugin, change settings, and configure it with custom UIs
in the one place.
In future we will do this in "config areas" for other parts of the
admin UI.
With the new admin sidebar restructure, we have a link to "Installed plugins". We would like to ensure that when the admin is searching for a plugin name like "akismet" or "automation" this link will be visible. Also when entering the plugins page, related plugins should be highlighted.
This commit adds new plugin show routes (`/admin/plugins/:plugin_id`) as we move
towards every plugin having a consistent UI/landing page.
As part of this, we are introducing a consistent way for plugins
to show an inner sidebar in their config page, via a new plugin
API `register_admin_config_nav_routes`
This accepts an array of links with a label/text, and an
ember route. Once this commit is merged we can start the process
of conforming other plugins to follow this pattern, as well
as supporting a single-page version of this for simpler plugins
that don't require an inner sidebar.
Part of /t/122841 internally
Why this change?
The `/admin/customize/themes/:id/schema/name` route is a work in
progress but we want to be able to start navigating to it from the
`/admin/customize/themes/:id` route.
What does this change do?
1. Move `adminCustomizeThemes.schema` to a child route of
`adminCustomizeThemes.show`. This is because we need the model
from the parent route and if it isn't a child route we end up
having to load the theme model again from the server.
1. Add the `objects_schema` attribute to `ThemeSettingsSerializer`
1. Refactor `SiteSettingComponent` to be able to render a button
so that we don't have to hardcode the button rendering into the
`SiteSettings::String` component
In this PR, the admin panel remembers the previous state and restores it when the admin panel is deactivated.
https://github.com/discourse/discourse/pull/25781
However, it would be better to have a more generic solution. When the panel is changed, the previous state is saved in the sidebarState. When a user returns to the specific panel, a previously remembered state is restored.
We have separated and combined modes for sidebar panels.
Separated means the panels show only their own sections,
combined means sections from all panels are shown.
The admin sidebar only shows its own panels, so it must set
the mode to separated; however when we navigate to chat or
home we must revert to the initial mode setttings.
Affects the following settings:
delete_all_posts_and_topics_allowed_groups
experimental_new_new_view_groups
enable_experimental_admin_ui_groups
custom_summarization_allowed_groups
pm_tags_allowed_for_groups
chat_allowed_groups
direct_message_enabled_groups
chat_message_flag_allowed_groups
This turns off client: true for these group-based settings,
because there is no guarantee that the current user gets all
their group memberships serialized to the client. Better to check
server-side first.
This commit is the first of a series of commits that will allow themes to define complex settings types by declaring a schema of the setting structure that Discourse core will use to build a UI for the setting automatically. We implement the navigation logic and support for multiple levels of nesting in this commit and we'll continue building this new system gradually in future commits.
Internal topic: t/116870.
When we show the links to installed plugins in the admin
sidebar (for plugins that have custom admin routes) we were
previously only doing this if you opened /admin, not if you
navigated there from the main forum. We should just always
preload this data if the user is admin.
This commit also changes `admin_sidebar_enabled_groups` to
not be sent to the client as part of ongoing efforts to
not check groups on the client, since not all a user's groups
may be serialized.
Having the admin sidebar code in an instance initializer is not
ideal because:
* It runs during app boot which may not even be necessary based on site settings
* It makes it hard for plugins to register additional links in time without resorting
to before/after initializer gymnastics
This PR moves the admin sidebar into a lib and creates the panel
in custom-sections.js, then the sections and links are loaded when
the main sidebar component is rendered, which leaves plugins enough
time to add additional links in an initializer.
---------
Co-authored-by: David Taylor <david@taylorhq.com>
This is v0 of admin sidebar navigation, which moves
all of the top-level admin nav from the top of the page
into a sidebar. This is hidden behind a enable_admin_sidebar_navigation
site setting, and is opt-in for now.
This sidebar is dynamically shown whenever the user enters an
admin route in the UI, and is hidden and replaced with either
the:
* Main forum sidebar
* Chat sidebar
Depending on where they navigate to. For now, custom sections
are not supported in the admin sidebar.
This commit removes the experimental admin sidebar generation rake
task but keeps the experimental sidebar UI for now for further
testing; it just uses the real nav as the default now.
This commit adds an /admin/customize/theme-components route,
that opens the theme page with the components tab pre-selected,
so people can navigate to that directly.
NOTE: Most of this is experimental and will be removed at a later
time, which is why things like translations have not been added.
The new /admin-revamp UI uses a sidebar for admin nav. This initial
step adds a script to generate a map of all the current admin nav
into a format the sidebar to read. Then, people can experiment
with different changes to this structure.
The structure can then be edited from `/admin-revamp/config/sidebar-experiment`,
and it is saved to local storage so people can visually experiment with different ways
of showing the admin sidebar links.
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
As of #23867 this is now a real package, so updating the imports to
use the real package name, rather than relying on the alias. The
name change in the package name is because `I18n` is not a valid
name as NPM packages must be all lowercase.
This commit also introduces an eslint rule to prevent importing from
the old I18n path.
For themes/plugins, the old 'i18n' name remains functional.
- Switch to `@tracked` and native getters
- Remove queryParam defaults which are awkward to work with. Instead, add `resolvedBlah` getters
- Add 'no results found' text
- Use standard 'model' key instead of a custom `setupController` method
- Remove use of `route-action`
- Remove `{{action` helper
Default queryParams in ember controllers are tricky to work with, especially when combined with the new router service. Instead, we can handle defaults ourselves
* DEV: upgrade grant badge modal to glimmer
* DEV: add unit tests for grant badge utils
* DEV: replace grant-badge-controller mixin with grant-badge-utils in admin-user-badges controller
* DEV: remove GrantBadgeController mixin
This commit contains a few improvements:
* Use LinkTo instead of a button with a weird action referencing the
controller to navigate to the filtered settings for a plugin
* Add an AdminPlugin model with tracked properties and use that when
toggling the setting on/off and in the templates
* Make it so the Settings button for a plugin navigates to the correct
site setting category instead of always just going to the generic
"plugins" one if possible
Previously, we had a `showFooter` boolean on the application controller which would be set true/false in various routes by different routes/controllers. A global `routeWillChange` hook would set it `false` before every route transition, and the destination route/controller would have to set it `true` for the footer to show correctly.
This commit replaces that with a new 'declarative' system. Instead of having to set the value true/false manually, UIs which need the footer to be hidden can simply include the `{{hide-application-footer}}` helper in their template when needed. The helper/service will automatically keep track of all the current invocations of that helper, and only show the footer when there are 0 invocations.
This significantly simplifies things, and removes the need for many observers and controller injections, both of which are considered 'code smells' in modern Ember applications.
provide the ability to edit theme settings in the json editor, and also copy them as a text file so they can be pasted into another instance.
Reference: /t/65023
- Convert `admin-incoming-email` modal to component-based API
- Testing that the modal was working in local development was extremely challenging due to the need for `rejected` and `bounced` emails. Something that is not easy to stub in a local dev environment. To make this process more smooth for future developers I have added a new rake task:
```
desc "Creates sample email logs"
task "email_logs:populate" => ["db:load_config"] do |_, args|
DiscourseDev::EmailLog.populate!
end
```
That will generate fully functional email logs in development to be toyed with.
<img width="787" alt="Screenshot 2023-07-20 at 3 27 04 PM" src="https://github.com/discourse/discourse/assets/50783505/47b3fe34-cd7e-49a5-8fe6-768c0fbd1aa2">
011ba5b9 slightly changed the way the staff-action-log route is activated. It's now possible for `deserializeQueryParam` to be called with a null value, so we need to deal with that case.
This route is currently untested - we'll follow-up with another commit to add some.
This PR adds a feature to help admins stay up-to-date with their translations. We already have protections preventing admins from problems when they update their overrides. This change adds some protection in the other direction (where translations change in core due to an upgrade) by creating a notice for admins when defaults have changed.
Terms:
- In the case where Discourse core changes the default translation, the translation override is considered "outdated".
- In the case above where interpolation keys were changed from the ones the override is using, it is considered "invalid".
- If none of the above applies, the override is considered "up to date".
How does it work?
There are a few pieces that makes this work:
- When an admin creates or updates a translation override, we store the original translation at the time of write. (This is used to detect changes later on.)
- There is a background job that runs once every day and checks for outdated and invalid overrides, and marks them as such.
- When there are any outdated or invalid overrides, a notice is shown in admin dashboard with a link to the text customization page.
Known limitations
The link from the dashboard links to the default locale text customization page. Given there might be invalid overrides in multiple languages, I'm not sure what we could do here. Consideration for future improvement.
