This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
* FIX: Clear stale status of reloaded reviewables
Navigating away from and back to the reviewables reloaded Reviewable
records, but did not clear the "stale" attribute.
* FEATURE: Show user who last acted on reviewable
When a user acts on a reviewable, all other clients are notified and a
generic "reviewable was resolved by someone" notice was shown instead of
the buttons. There is no need to keep secret the username of the acting
user.
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
This PR fixes a couple of issues related to group SMTP:
1. When running the group SMTP job, we were exiting early if the email was for the OP because of an IMAP race condition. However this causes issues when replying as a new topic for an existing SMTP topic, as the recipient does not get the OP email which can cause threading problems.
2. When sending emails for a new topic spun out like the issue in 1., we are not maintaining the original subject/topic title because that is based on the incoming email record, which we were not doing because the group SMTP email was never sent because of issue 1.
There was an issue with the TopicTimerEnqueuer where any timer
that failed to enqueue_typed_job with an error would prevent
all other pending timers after the one that errored from running.
To mitigate this we just capture the error and log it (so we can
still fix it if needed for bug crushing) and proceed with the
rest of the timer enqueues.
The commit https://github.com/discourse/discourse/pull/13544 highlighted
this issue originally in hosted sites.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Use the `sidekiq_retry_in` code from Jobs::UserEmail in group SMTP. Also we don't need to keep `seconds_to_delay` -- sidekiq uses the default delay calculation if you return 0 or nil from the block. See 3330df0ee3/lib/sidekiq/job_retry.rb (L216-L234) for sidekiq default retry delay logic.
I experimented with extracting this into a concern or a module, but `sidekiq_retry_in` is quite magic and it would not allow me to abstract away into a module that calls some method specificall in the child job class.
I would love to write tests for this, but it does not seem possible (not sure if its because of our test
setup) to write tests that test sidekiq's retry capability, and I am not sure if we should be anyway. Initial addition
to UserEmail did not test this functionality
d224966a0e
Skip group SMTP email (and add log) if:
* topic is deleted
* post is deleted
* smtp has been disabled for the group
Skip without log if:
* enable_smtp site setting is false
* disable_emails site setting is yes
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This PR backtracks a fair bit on this one https://github.com/discourse/discourse/pull/13220/files.
Instead of sending the group SMTP email for each user via `UserNotifications`, we are changing to send only one email with the existing `Jobs::GroupSmtpEmail` job and `GroupSmtpMailer`. We are changing this job and mailer along with `PostAlerter` to make the first topic allowed user the `to_address` for the email and any other `topic_allowed_users` to be the CC address on the email. This is to cut down on emails sent via SMTP, which is subject to daily limits from providers such as Gmail. We log these details in the `EmailLog` table now.
In addition to this, we have changed `PostAlerter` to no longer rely on incoming email email addresses for sending the `GroupSmtpEmail` job. This was unreliable as a user's email could have changed in the meantime. Also it was a little overcomplicated to use the incoming email records -- it is far simpler to reason about to just use topic allowed users.
This also adds a fix to include cc_addresses in the EmailLog.addressed_to_user scope.
* FEATURE: Staff can receive pending user reminders more frequently.
We now express the "pending_users_reminder_delay" in minutes instead of hours so staff can have finer control over the delay.
We need to keep in mind that the reminders could still take up to 20 minutes, even when using a lower value. We send them from a scheduled job.
* Migrate to a new site setting for the reminders delay
ATM it only implements server side of it, as my need is for automation purposes. However it should probably be added in the UI too as it's unexpected to have pinned_until and no bannered_until.
Anonymizing a user changed their email address, destroyed all
associated InvitedUser records, but did not destroy the invites
associated to user's email.
When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
Notifying about a tag change sometimes resulted in loading a large
number of users in memory just to perform an exclusion. This commit
prefers to do inclusion (i.e. instead of exclude users X, do include
users in groups Y) and does it in SQL to avoid fetching unnecessary
data that is later discarded.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Email change requests are never deleted no matter if they completed
successfully or not. The abandoned requests have the disadvantage of
showing up as unconfirmed emails in user's preferences page.
Recalculating a ReviewableFlaggedPost's score after rejecting or ignoring it sets the score as 0, which means that we can't find them after reviewing. They don't surpass the minimum priority threshold and are hidden.
Additionally, we only want to use agreed flags when calculating the different priority thresholds.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
This filter hides reviewables with a score lower than the "reviewable_low_priority_threshold" setting. We only use reviewables that already met this threshold to calculate the Medium and High priority filters.
It used to check if an upload record exists, which is wrong because an
invalid upload record exists even if the upload was not created.
The other improvement is a better log message.
Previously watched words ignored topic titles when applying auto tagging rules.
Also copy has been improved to reflect how the system behaves.
The text hints that we are only watching first post now
scopes are incredibly annoying to preload, simply adding :user_emails is not
enough.
Instead of relying on scopes simply iterate through user_emails which is
properly preloaded.
This removes 2 * N+1 when generating user reports.
When posts are moved from one topic to another, the `topic_user.bookmarked` column for all users in the new and the old topic needs to be resynced, for example because a user bookmarks post 12 in topic 1, then it is moved to topic 2, the topic_user record for topic 1 should no longer be bookmarked. A background job has been added to sync the column for a specified topic, or for no topic at all, which does it for all topics like the migration.
Also includes a migration that we have run in the past to fix bad data.
----
This has been addressed in other places in the past:
https://github.com/discourse/discourse/pull/10211https://github.com/discourse/discourse/pull/10188
When bulk inviting, the uploaded CSV file may contain wrong values for
the user fields. This tries to automatically correct them by finding
the most similar option (by ignoring the case).
Admins can use bulk invites to pre-populate user fields. The imported
CSV file must have a header with "email" column (first position) and
names of the user fields (exact match).
Under the hood, the bulk invite will create staged users and populate
the user fields of those.
The user mailing list mode continued to be silently enabled and
UserEmail job checked just that ignoring site setting
disable_mailing_list_mode.
An additional migrate was added to set disable_mailing_list_mode
to false if any users enabled the mailing list mode already.
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
Onebox content may only be resolved during the process_post job. Onebox content could change the content of the excerpt, so we need to make sure the excerpt is updated accordingly.
The urls that we generate for mobile post notifications don't take into
account the subfolder url if a site happens to have one configured. When
this happens when you tap on a new mobile notification it takes you to
a url that doesn't work because it is missing the subfolder portion.
I honestly think this should be handled in the Post model like we do
with the Topic model. `Post.url` should know how to handle subfolder
installs, but that seemed like a very risky change because there are
lots of other places in the codebase where we tack on the base_path and
I didn't want to risk duplicating it.
I also found a small typo in the topics controller spec.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
