This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This feature only was only demuxing stdout, not stderr. That means that stdout and stderr output appears out-of-order, and makes debugging migrations very confusing.
In future we may want to add stderr support to the demuxing. But right now, the concurrency variable is hard-coded to 1. Therefore the easiest fix is to bypass the demuxing.
Incorporates learnings from /t/64227:
* Changes the code to set access control posts in the rake
task to be an efficient UPDATE SQL query.
The original version was timing out with 312017 post uploads,
the new query took ~3s to run.
* Changes the code to mark uploads as secure/not secure in
the rake task to be an efficient UPDATE SQL query rather than
using UploadSecurity. This took a very long time previously,
and now takes only a few seconds.
* Spread out ACL syncing for uploads into jobs with batches of
100 uploads at a time, so they can be parallelized instead
of having to wait ~1.25 seconds for each ACL to be changed
in S3 serially.
One issue that still remains is post rebaking. Doing this serially
is painfully slow. We have a way to do this in sidekiq via PeriodicalUpdates
but this is limited by max_old_rebakes_per_15_minutes. It would
be better to fan this rebaking out into jobs like we did for the
ACL sync, but that should be done in another PR.
22a7905f restructured how we load Ember CLI assets in production. Unfortunately, it also broke sourcemaps for those assets. This commit fixes that regression via a couple of changes:
- It adds the necessary `.map` paths to `config.assets.precompile`
- It swaps Sprockets' default `SourcemappingUrlProcessor` with an extended version which maintains relative URLs of maps
Enabled extensions are not saved in backups and thus not created when
restoring a newer backup (that has a new extension) to an old site
(that does not have the migration).
Latest redis interoduces a block form of multi / pipelined, this was incorrectly
passed through and not namespaced.
Fix also updates logster, we held off on upgrading it due to missing functions
Note this commit also introduce a new {{d-popover}} component, example usage:
```hbs
{{#d-popover |state|}}
{{d-button label="foo.things" class="d-popover-trigger"}}
<div class="d-popover-content">
Some content
<div>
{{/d-popover}}
```
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
1. Sort plugins by name
2. Include plugins that are a symbolic link to a submodule repo (in those cases `.git` isn't a directory but a file that looks like e.g. `gitdir: ../../.git/modules/plugins/name-here`)
1. `test/run-qunit.js` wasn't eslinted (I'm not adding it to the CI workflow for now, just fixed the issues)
2. "…" utf character isn't rendered correctly in Jenkins, replaced with three dots
3. Don't try to lint `tmp` when doing `eslint .` in the root dir
Missing plugin gems are installed when the app is being loaded.
That means when you run `bin/rails plugin:install_all_gems` it first installs missing gems and then reinstalls all gems…
Also, the method these rake tasks were using to install gems was very crude, and the regex there was incorrect which resulted in failures in certain cases. Though that didn't matter since those gems were being installed using a correct method just moments before…
…to avoid repeatedly printed notes:
```
hint: Pulling without specifying how to reconcile divergent branches is
hint: discouraged. You can squelch this message by running one of the following
hint: commands sometime before your next pull:
hint:
hint: git config pull.rebase false # merge (the default strategy)
hint: git config pull.rebase true # rebase
hint: git config pull.ff only # fast-forward only
hint:
hint: You can replace "git config" with "git config --global" to set a default
hint: preference for all repositories. You can also pass --rebase, --no-rebase,
hint: or --ff-only on the command line to override the configured default per
hint: invocation.
```
`Dir.glob` doesn't guarantee any particular order for results. However, it does appear to be consistent on a given machine. This means that specs can consistently pass on one machine while consistently failing on another. This can lead to some very confusing situations!
This commit sorts the spec files alphabetically so that load order is consistent across environments.
Note that the order in which tests are **run** is not affected by this change. Run order is still randomized by RSpec
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
This commit introduces a new environment variable `RAISE_THEME_ERRORS`
that can control what happens when `theme:update` Rake task errors. It
can have three possible values: `0` to always print errors, `1` to
always raise on error, or be absent to use the default behavior which
raises errors only for default sites.
Example error:
```
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: already initialized constant EMBER_CLI
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: previous definition of EMBER_CLI was here
```
The `assets:precompile` rake task loads the full Ruby app, which can consume around 500mb of RAM by itself. Using `exec` to run `ember build` allows us to free up the Ruby memory and make more space for `ember build`
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
Ember CLI gives sourcemaps their own digest. Our `s3.rake` logic assumes that the digest portion of sourcemap filenames remains the same.
The Ember CLI sourcemaps are included in the manifest file, so we can ensure they are uploaded by letting them past the MiniMime check.
Followup to abefb1beff
If no path is supplied, browsers will look for the map on the same path as the JS file itself. This fixes two problems that we see in production:
1. When compiling assets against one CDN, and then re-using them on a site with a different CDN, the sourceMappingUrls would be incorrect and print warnings in the console
2. If both an S3 CDN and an app CDN are configured, we were using the S3 CDN for the JS and the app CDN for the map. This commit will make sure we use the S3 CDN for both.
ember-cli already runs terser on its output. Running it through again provides no benefit, takes longer, and also breaks source mapping of these assets in production.
This can be disabled by setting `EMBER_CLI_PROD_ASSETS=0`, but this option will not be available for long. If your theme/plugin/site has issues under Ember CLI, please open a topic on https://meta.discourse.org
Job arguments go via JSON, and so symbols will appear as strings in the Job's `#execute` method. The latest version of Sidekiq has started warning about this to reduce developer confusion.
Running `update_from_remote` and `save!` cause a number of side-effects, including instructing all clients to reload CSS files. If there are no changes, then this is wasteful, and can even cause a 'flicker' effect on clients as they reload CSS.
This commit checks if any updates are available before triggering `update_from_remote` / `save!`. This should be much faster, and stop the 'flickering' UX from happening on every themes:update run.
It also improves the output of the command to include the from/to commit hashes, which may be useful for debugging issues. For example:
```
Checking 'Alien Night | A Dark Discourse Theme' for 'default'... already up to date
Checking 'Star Wars' for 'default'... updating from d8a170dd to 66b9756f
Checking 'Media Overlay' for 'default'... already up to date
```
`account_created` email contains a URL to `/u/password-reset/TOKEN`
which means that the correct scope for the email token is
`password_reset`, not `signup`.
For now this is still gated behind a `QUNIT_EMBER_CLI=1` environment variable, but will eventually become the default so that we can remove `run-qunit.js`.
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
The `plugin:pull_compatible_all` task is intended to take incompatible plugins and downgrade them to an earlier version. Problem is, when running the rake task in development/production environments, the plugins have already been activated. If an incompatible plugin raises an error in `plugin.rb` then the rake task will be unable to start.
This commit centralises our LOAD_PLUGINS detection, adds support for LOAD_PLUGINS=0 in dev/prod, and adds a warning to `plugin:pull_compatible_all` if it's run with plugins enabled.
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
The rake task deleted here was added back in Feb 2020
when bookmarks were first converted from PostAction
records, it is no longer needed. The ignored columns
were removed in ed83d7573e.
This commit adds API documentation for the new upload
endpoints related to direct + multipart external uploads.
Also included is a rake task which watches the files in
the spec/requests/api directory and calls a script file
(spec/regenerate_swagger_docs) whenever one changes. This
script runs rake rswag:specs:swaggerize and then copies
the openapi.yml file over to the discourse_api_docs repo
directory, and hits a script there to convert the YML to
JSON so the API docs are refreshed while the server is
still running. This makes the loop of making a doc change
and seeing it in the local server much faster.
The rake task is rake autospec:swagger
This commit removes jQuery file uploader from Discourse,
completing the transition to Uppy. The image-uploader
and UploadMixin components are also removed in this commit
as they have already been replaced and are the only things
using jQuery file upload.
.-'~~~`-.
.' `.
| R I P |
| jquery |
| file |
| upload |
| |
\\| 2013-2021 |//
-----------------
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
The discourse base image already contains a postgres installation, so pulling a separate postgres image is a little wasteful. Using the copy of Postgres in the discourse image saves about 20 seconds on every GitHub actions run.
This commit sets up Postgres with a few performance-improving flags, which we were already using for the `rake docker:test` task (used on our internal CI system).
Themes that are imported via a ZIP file do have a `remote_theme` record in the database but the record has a blank value for the `remote_url` field which means attempting to do an update git via will result in an error.
The error handling of the theme:update Rake task has been improved. If
an error occurs while updating the default site, then the exception will
be propagated and the process will exit with non-zero status.
This is a follow-up to commit 3f97f884fe.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
This applies only when a single site exists. If a theme update fails
when there are multiple sites, then it will continue updating the
remaining themes.
* Revert "DEV: increase lock timeout for multisite migration (#14831)"
This partially reverts commit 337ef60303.
We need to revert the mutex around `db:status:json` because the mutex is not available unless the rails environment is loaded which the `db:status:json` doesn't load before the mutex. We can't load the environment before entering the mutex because the mutex is meant to prevent other instances of the task from loading a rails environment while the database is migrating.
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: David Taylor <david@taylorhq.com>
This commit introduces a new s3:ensure_cors_rules rake task
that is run as a prerequisite to s3:upload_assets. This rake
task calls out to the S3CorsRulesets class to ensure that
the 3 relevant sets of CORS rules are applied, depending on
site settings:
* assets
* direct S3 backups
* direct S3 uploads
This works for both Global S3 settings and Database S3 settings
(the latter set directly via SiteSetting).
As it is, only one rule can be applied, which is generally
the assets rule as it is called first. This commit changes
the ensure_cors! method to be able to apply new rules as
well as the existing ones.
This commit also slightly changes the existing rules to cover
direct S3 uploads via uppy, especially multipart, which requires
some more headers.
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
