The previous excerpt was a simple truncated raw message. Starting with
this commit, the raw content of the draft is cooked and an excerpt is
extracted from it. The logic for extracting the excerpt mimics the the
`ExcerptParser` class, but does not implement all functionality, being
a much simpler implementation.
The two draft controllers have been merged into one and the /draft.json
route has been changed to /drafts.json to be consistent with the other
route names.
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This moves all the rate limiting for user second factor (based on `params[:second_factor_token]` existing) to the one place, which rate limits by IP and also by username if a user is found.
25563357 moved the logout redirect logic from the client-side to the server-side. Unfortunately the login_required check was lost during the refactoring which meant that non-login-required sites would redirect to `/login` after redirect, and immediately restart the login process. Depending on the SSO implementation, that can make it impossible for users to log out cleanly.
This commit restores the login_required check, and prevents the potential redirect loop.
- Display reason for validation error when logging in via an authenticator
- Fix email validation handling for 'Discourse SSO', and add a spec
Previously, validation errors (e.g. blocked or already-taken emails) would raise a generic error with no useful information.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
This commit prevents a 500 error from occurring if someone is trying to
setup their discourse instance as a sso provider and they don't pass in
a `return_sso_url` in their payload.
1. Total 6 attempts per day per user
2. Total of 5 per unique email/login that is not found per hour
3. If an admin blocks an IP that IP can not request a reset
Timezone is guessed by moment.js if unset upon a normal login, but was not when
logging in via an email link. This adds logic to update a guessed
timezone upon email login so timezones don't end up blank.
Previously we were only updating group membership when a user record was
first created in an SSO setting.
This corrects it so we also update it if SSO changes the email
This commit adds support for an optional "logout" parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a "logout=true" parameter to the encoded/signed "sso" payload,
then Discourse will treat the request as a logout request instead
of an authentication request. The logout flow works something like
this:
* User requests logout at SSO-Consumer site (e.g., clicks "Log me out!"
on web browser).
* SSO-Consumer site does whatever it does to destroy User's session on
the SSO-Consumer site.
* SSO-Consumer then redirects browser to the Discourse sso_provider
endpoint, with a signed request bearing "logout=true" in addition
to the usual nonce and the "return_sso_url".
* Discourse destroys User's discourse session and redirects browser back
to the "return_sso_url".
* SSO-Consumer site does whatever it does --- notably, it cannot request
SSO credentials from Discourse without the User being prompted to login
again.
Previously if local login via email was disabled because of the site setting or because SSO was enabled, we were raising a 500 error. We now raise a 403 error instead; we shouldn't raise 500 errors on purpose, instead keeping that code for unhandled errors. It doesn't make sense in the context of what we are validating either to raise a 500.
* When we refactored away the admin-login route we introduced a bug where admins could not log into an SSO enabled site, because of a check in the email_login route that disallowed this.
* Allow admin to get around this check.
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
* FIX: Better error when SSO fails due to blank secret
* Update spec/requests/session_controller_spec.rb
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
* SECURITY: Add confirmation screen when logging in via email link
* SECURITY: Add confirmation screen when logging in via user-api OTP
* FIX: Correct translation key in session controller specs
* FIX: Use .email-login class for page
We now treat any external_id of blank string (" " or " " or "", etc) or a
invalid word (none, nil, blank, null) - case insensitive - as invalid.
In this case the client will see "please contact admin" the logs will explain
the reason clearly.
* Introduced fab!, a helper that creates database state for a group
It's almost identical to let_it_be, except:
1. It creates a new object for each test by default,
2. You can disable it using PREFABRICATION=0
This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
If you turn it on now, default all users to approved since they were
previously. Also support approving a user that doesn't have a reviewable
record (it will be created first.)
This also includes a refactor to move class method calls to
`DiscourseEvent` into an initializer. Otherwise the load order of
classes makes a difference in the test environment and some settings
might be triggered and others not, randomly.
