Given we are a single-page-app, we hijack the browser's default behavior
for keyboard shortcuts like End because on long topics (20+ posts) we
need to load the last post before really reaching the end of the page.
However, when the last post is already rendered, the End shortcut
currently does nothing, it takes the user to the start of the last post.
If that post is too long, the user will have to scroll down manually.
This change ensures that if the last post of a topic is already rendered
(whether it is in the viewport or not), pressing End will take the user
to the very bottom of the page.
Note for the reviewer: the test added here is for the general case, it
is too hard to test the case where the last post is already rendered,
that isn't covered here.
Follow-up to e3ae57ea7a
The previous commit added an `after_create` callback that triggers a refresh for the user directory whenever a `User` record is created. Theoretically, this approach should work, however, there's a gotcha in practice, because during a real user registration, when the `User` record is created in the database, it's not marked as active until the user verifies their email address and the user directory excludes inactive users, so the initial directory refresh triggered by the `after_create` callback becomes pointless.
To make a new user appear in the user directory immediately after sign up, we need to trigger a refresh via an `after_save` callback when they verify their email address and become active.
Currently, `FlagSerializer#short_description` properly provides
`base_path` to its translations, but `FlagSerializer#description` does
not. This breaks the link to guidelines when flagging a post, for
example.
This patch provides `base_path` for `FlagSerializer#description` too.
Prior this fix a topic created in the future could generate this exception:
```
Job exception: ERROR: a negative number raised to a non-integer power yields a complex result
```
This fix and spec should ensure we don't consider topics in the future as the rest of the `update_scores` function is doing at other places.
This check was checking the wrong scope, causing problems in certain edge conditions, for example:
1. Admin adds an "on signup" field that isn't editable after signup.
2. Admin adds a "for all users" field.
3. User goes and fills up the "for all users" field from 2.
4. User is now stuck on the required fields page without any fields showing.
With this change, we only consider "for all users" fields when asking if required custom fields are filled in.
Covers the use case of doing this in composer:
```javascript
page.execute_script("document.querySelector('.d-editor-input').setSelectionRange(6, 12);")
```
When searching for site texts for admin using the english
version of the text, previously we would show the english
version in the results _even if_ there was another locale
translated version available when a locale was selected
from the dropdown.
This commit adds a "Only show results in selected locale"
checkbox option which will instead make it so the results
shown are in the target locale, making it easier for translators
to tell when there is actually translations vs. missing tranlsations.
Followup 76c56c8284
The change introduced above made it so the expired
bookmark reminders were cleared when using the bulk
action menu for bookmarks. However this also affected
clearing reminders for bookmarks when sending notifications.
When clearing bookmark reminders after sending notifications,
we take into account the auto delete preference:
* never - The bookmark `reminder_at` date should not be cleared,
and the bookmark is kept.
* clear_reminder - The bookmark `reminder_at` date is cleared and
the bookmark is kept
The `never` option made it so "expired" bookmark reminder show
on the user's bookmark list.
This commit fixes the change from the other commit and only
forces clearing of `reminder_at` if using the bookmark bulk
action service.
If there is a codec issue or something trying to process a video file
for thumbnail generation, uploads could hang indefinitely. This fix
ensures that we continue the upload process even if we encounter an
error trying to generate a thumbnail for it.
If you’re viewing a tag and you switch to a different tag via the sidebar or the tags dropdown, after expanding the info section of the tag page via the wrench button, the info section keeps showing the previous tag's details instead of the new one.
This happens because the tag info section makes an ajax request to load the tag's details, and this request is made inside the `didInsertElement` hook which is only fired once when the component is rendered. To fix this, we need to set the result from the ajax request to null and add a `didUpdateAttrs` hook to trigger another request to load the info of the new tag.
Internal topic: t/134809.
This change is preventing the "is dirty check" from happening when clicking delete on this form. This was not good UX and was also causing bugs by leaving the form in a unexpected state.
This commit improves `TopicsController#show` to not load suggested and
related topics unless it is the last page of the topic's view.
Previously, we avoided loading suggested and related topics by the use
of conditionals in the `TopicViewSerializer` to avoid calling
`TopicView#suggested_topics` and `TopicView#related_topics`. However,
this pattern is not reliable as the methods can still be called from
other spots in the code base. Instead, we ensure that
`TopicView#include_suggested` and `TopicView#include_related` is set
correctly on the instance of `TopicView` which ensures that for the
given instance, `TopicView#suggested_topics` and
`TopicView#related_topics` will be a noop.
Previous to this change there is no clean way to apply keyboard shortcuts
to things such as "add poll" and other hidden options in the toolbar
This allows shortcuts to be specified similar to how they are on the toolbar
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
If we don't get a `videoWidth` back for a video don't try and generate a
thumbnail for it.
Also as part of this change I switched getImageData, the function
throwing the error, to use video.videoWidth instead of canvas.width
because it's very likely we were setting canvas.width too early before
the width could be read. Now that we are reading the value inside of the
setTimeout hopefully we will actually have a width. Just incase we don't
detect a width we will now exit early instead of throwing an error.
We only need to check for `0` and not null because the value is an
integer and will always return a 0 if it can't be read. https://developer.mozilla.org/en-US/docs/Web/API/HTMLVideoElement/videoWidth
See https://meta.discourse.org/t/322363
What did this fix?
===============
Previously, we only triggered this event in the `user.logged_out` method.
This resulted in the event being triggered only when the user was logged
out by the administrator or the site had strict logout mode enabled.
This bug affected customers who managed user status via webhooks.
meta topic: https://meta.discourse.org/t/user-log-out-event-not-triggered-in-webhooks/249464
This commit moves the business logic in the `Admin::UsersController#suspend` and `Admin::UsersController#silence` actions to dedicated service classes. There's no functional changes in this commit.
Internal topic: t/130014.
This commit implements 2 new metrics/stats in the /about page for the _estimated_ numbers of unique visitors from the EU and the rest of the world. This new feature is currently off by default, but it can be enabled by turning on the hidden `display_eu_visitor_stats` site settings via the rails console.
There are a number of assumptions that we're making here in order to estimate the number of unique visitors, specifically:
1. we're assuming that the average of page views per anonymous visitor is similar to the average number of page views that a logged-in visitor makes, and
2. we're assuming that the ratio of logged in visitors from the EU is similar to the ratio of anonymous visitors from the EU
Discourse keeps track of the number of both logged-in and anonymous page views, and also the number of unique logged-in visitors and where they're from. So with those numbers and the assumptions above, we can estimate the number of unique anonymous visitors from the EU and the rest of the world.
Internal topic: t/128480.
We need a way to disable certain checks programatically, e.g. on Discourse hosting. This PR adds a configuration option for this, and makes it so that disabled checks aren't run as part of #run_all.
This patch allows using an AR relation as a model in services without
fetching associated records. It will just check if the relation is empty
or not. In the former case, the execution will stop at that point, as
expected.
This commit introduces a new frontend API to add custom items to the "Site activity" section in the new /about page. The new API is called `addAboutPageActivity` and it works along side the `register_stat` serve-side API which serializes the data that the frontend API consumes. More details of how the two APIs work together is in the JSDoc comment above the API function definition.
Internal topic: t/128545/9.
This commit fixes a bug where the silence button is incorrectly displayed on the admin page of a staff user. It's not actually possible to silence a staff user because the backend correctly prevents it, but the frontend isn't checking if the button should be displayed.
Another small bug that this commit fixes is the similar users list not showing up inside the silence/suspend modals due to also a bug in the frontend.
I've also changed the way similar users are loaded so that they're not returned by the `admin/users#show` endpoint anymore and moved them into a new endpoint that the penalize modals (suspend and silence) can call directly to retrieve the list of users. This is done because the similar users list is never shown on the admin user page (`/admin/users/:user_id/:username`); they're only needed when the suspend or silence modals are opened.
Internal topic: t/130014.
Currently the push_notification_time_window_mins is set to 10
minutes by default. We want to change this to 1 minute, which is the
delay it has been set to on meta and our internal site already for over
a year now.
This conforms to the expectation users have that notifications are
delivered close to immediately.
This commit converts the Backups page in the admin interface
to follow our new admin interface guidelines.
As part of this work, I've also made `AdminPageHeader` and `AdminPageSubheader`
components that can be reused on any admin page for consistency, that handle
the title and action buttons and also breadcrumbs.
Also renamed `AdminPluginFilteredSiteSettings` to `AdminFilteredSiteSettings` since
it can be used generally to show a subset of filtered site settings, not only
settings for a plugin. Not sure if it's ideal to have to define a new route for this
for every config area, but not sure how else to do it right now.
This commit fixes two codepaths which where incorrectly working with capitalized usernames as we were doing a mix of username_lower and non lower username.
Also adds two specs for these cases.
This patch removes two freedom patches:
- `mail_disable_starttls.rb`: this has been fixed in the 2.8 release of
the mail gem, so we don’t need it anymore.
- `rails4.rb`: those methods have been deprecated for a while now and
should have been dropped with Discourse v3.2.
This commit adds a blue dot next to the "What's New"
link in the admin sidebar if the user has not seen the
new features yet, as a followup to 3e5976f843
which removed the tab on the dashboard that had this same
functionality.
When the admin visits the "What's New" page they count
as having seen all the features straight away. This could
be something we want to change, but for now this keeps the
same functionality.
* System user attachment size WIP
* spec check
* controller update
* add max to system_user_max_attachment_size_kb
* DEV: update to use static method for `max_attachment_size_for_user`
add test to use large image.
add check for failure.
* DEV: update `system_user_max_attachment_size_kb` default value to 0
remove unecessary test.
update tests to reflect the new default value of `system_user_max_attachment_size_kb`
* DEV: update maximum_file_size to check when is an attachment made by a system user
Add tests for when `system_user_max_attachment_size_kb` is over and under the limit
Add test for checking interaction with `max_attachment_size_kb`
* DEV: move `max_attachment_size_for_user` to private methods
* DEV: turn `max_attachment_size_for_user` into a static method
* DEV: typo in test case
* DEV: move max_attachment_size_for_user to private class method
* Revert "DEV: move max_attachment_size_for_user to private class method"
This reverts commit 5d5ae0b715.
---------
Co-authored-by: Gabriel Grubba <gabriel@discourse.org>
This has been split out from https://github.com/discourse/discourse/pull/28051
so we can use this same code in plugin specs before merging the core PR,
adds some helpers for creating local backup temp files
and cleaning them up.
We used to show New Features in a tab on the dashboard,
but this could get pushed down the page especially on
our hosting. In 043117ca13
we made a separate What's New page, so this commit removes
the dashboard tab and changes the admin notification to
send the admin to /admin/whats-new instead of the dashboard
tab.
* DEV: Removal of create_post_for_category_and_tag_changes setting
reverting commit: #65f35e1
and adding a migration to remove the setting
ref: t/132320
* DEV: change checks for zeros to check for nils
* DEV: remove create_post_for_category_and_tag_changes migration file
If anything goes wrong, we can always revert back to the previous state.
This commit fixes a bug in the redesigned about page where if there's no banner image configured for the page, the top of the page where the banner goes is occupied with large white space. Additionally, this commit also fixes a related bug in the admin config area for the /about page where it's not possible to remove the uploaded banner image.
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
When upgrading to Rails 7.1, we had some problems because we were using
several tagged loggers at the same time. They were all added to the main
broadcast logger shipped with Rails, but the Rails 7.1 codebase contains
a bug making a request being run as many times as there are tagged loggers.
The fix was to use the code from the Rails 7.2 codebase.
This patch adds a small spec to ensure the behavior will stay the proper
one in the future.
This change ensures native push notifications respect the site setting for push_notification_time_window_mins. Previously only web push notifications would account for the delay, now we can bring more consistency between Discourse in browser vs Hub, by applying the same delay strategy to both forms of push notifications.
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
Adds a new statistics (hidden from the UI, but available via the API) that tracks daily participating users.
A user is considered as "participating" if they have
- Reacted to a post
- Replied to a topic
- Created a new topic
- Created a new PM
- Sent a chat message
- Reacted to a chat message
Internal ref - t/131013
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add sections for showing the site admins and moderators.
The lists of admins and moderators display the 10 most recently seen admins/moderators, with a button to display the rest of admins or moderators. Admins or moderators that have not logged in to the site in the last year will not be shown. Clicking on an admin's or moderator's name/avatar will show their user card.
In development, Ember raises an error when previously-used values are updated during a render. This is to avoid 'backtracking', where parts of templates have to be re-rendered multiple times. In general, this kind of pattern should be avoided, and Ember's warning helps us do that.
However, for the deprecation warning banner, it is quite reasonable for some rendering to trigger a deprecation, and thereby require the global-notice to be re-rendered. We can use our `DeferredTrackedSet` to achieve that. Its `.add` method will delay adding an item to the Set until after the current render has completed.
Very similar to move up/down flag problem fixed here - https://github.com/discourse/discourse/pull/28272
Those are the steps to toggle the flag:
1. click toggle - `saving` CSS class is added;
2. request to backend;
3. `saving` CSS class is removed.
And check if the flag was toggle was:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saving")
has_no_css?(".admin-flag-item.#{key}.saving")
end
```
If the save action is very fast, then the saving class is removed before the first check.
Therefore I decided to invert it, and once action is finished add `saved` CSS class.
Then we can have a quick positive check:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saved")
end
```
