* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
* FIX: flaky specs after topic view custom filters
When ensuring TopicView class variables return to the original state it should use empty Hash instead of empty Array. That
https://github.com/discourse/discourse/blob/master/lib/topic_view.rb#L60
* FIX: convert to string for topic view custom filter
We have found when receiving and posting inbound emails to the handle_mail route, it is better to POST the payload as a base64 encoded string to avoid strange encoding issues. This introduces a new param of `email_encoded` and maintains the legacy param of email, showing a deprecation warning. Eventually the old param of `email` will be dropped and the new one `email_encoded` will be the only way to handle_mail.
It's been awhile since we have supported IE11 so it should be safe to remove
IntersectionObserver now.
From a TODO task in this repo:
> drop when we eventually drop IE11
Announcement of when we removed IE11 support:
https://meta.discourse.org/t/137984/40?u=blake
nil was converted to "" and the matching regex would return [] and then be converted to nil with max usage.
Example exception:
```
NoMethodError (undefined method `<=' for nil:NilClass)
lib/text_sentinel.rb:71:in `seems_unpretentious?'
lib/validators/quality_title_validator.rb:13:in `validate_each'
lib/topic_creator.rb:25:in `valid?'
```
Previous refactors have lost usage of read_timeout in `FileHelper.download` and `FinalDestination` was incorrectly using `Net::HTTP.start` by setting `open_timeout` in the block instead of directly during the invocation.
Couldn't figure how to write a good test for this without slowing the spec.
This commit makes a few changes to improve boot time in development environments. It will have no effect on production boot times.
- Skip the SchemaCache warmup. In development mode, the SchemaCache is refreshed every time there is a code change, so warmup is of limited use.
- Skip warming up PrettyText. This adds ~2s to each web worker's boot time. The vast majority of requests do not use PrettyText, so it is more efficient to defer its warmup until it's needed
- Skip the intentional 1 second pause during Unicorn worker forking. The comment (which also exists in Unicorn's documentation) suggests this works around a Unix signal handling bug, but I haven't been able to locate any more information. Skipping it in dev will significantly speed up boot. If we start to see issues, we can revert this change.
On my machine, this improves `/bin/unicorn` boot time from >10s to ~4s
Sometimes, parts of the application pass in the locale as a string, not a symbol. This was causing the translate_accelerator to cache two versions of the locale separately: one cache for the symbol version, and one cache for the string version. For example, in a running production process:
```
irb(main):001:0> I18n.instance_variable_get(:@loaded_locales)
=> [:en, "en"]
```
This commit ensures the `locale` key is always converted to a symbol, and adds a spec to ensure the same locale cannot appear twice in `@loaded_locales`
In development we regularly restart/reload Rails, which wipes out the schema cache. This then has to be regenerated using DDL queries on the database.
Instead, we can make use of the `rake db:schema:cache:dump` command. This will dump the schema cache to a YAML file, and then load it when needed. This is significantly faster than rebuilding the cache from DDL queries every time.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
Plugins always store their stylesheets under `/assets/stylesheets`, so we can make the glob pattern much more specific. In my local development environment, this increases the speed of `Stylesheet::Manager.max_file_mtime` from ~65ms to ~3ms (20x faster). This significantly improves stylesheet regeneration time, and the responsiveness of the theme admin UI.
Note that this will have negligible effect in production, because in production the value of `max_file_mtime` is aggressively cached.
This setting allows admin to de/activate automatic trimming of incoming email.
There are instances where it does wonders in trimming all the garbage content and other
instances where it's so bad that it trims the most important part of the email.
FIX: don't remove hidden content using the style attribute when converting HTML to Markdown.
The regexp used was doing more harm than good. It was way too broad.
FIX: properly elide signatures from emails sent with Front App.
This is fairly safe as Front App nicely identifies signatures in the HTML part.
The aim of this PR is to improve the topic tracking state JavaScript code and test coverage so further modifications can be made in plugins and in core. This is focused on making topic tracking state changes easier to respond to with callbacks, and changing it so all state modifications go through a single method instead of modifying `this.state` all over the place. I have also tried to improve documentation, make the code clearer and easier to follow, and make it clear what are public and private methods.
The changes I have made here should not break backwards compatibility, though there is no way to tell for sure if other plugin/theme authors are using tracking state methods that are essentially private methods. Any name changes made in the tracking-state.js code have been reflected in core.
----
We now have a `_trackedTopicLimit` in the tracking state. Previously, if a topic was neither new nor unread it was removed from the tracking state; now it is only removed if we are tracking more than `_trackedTopicLimit` topics (which is set to 4000). This is so plugins/themes adding topics with `TopicTrackingState.register_refine_method` can add topics to track that aren't necessarily new or unread, e.g. for totals counts.
Anywhere where we were doing `tracker.states["t" + data.topic_id] = newObject` has now been changed to flow through central `modifyState` and `modifyStateProp` methods. This is so state objects are not modified until they need to be (e.g. sometimes properties are set based on certain conditions) and also so we can run callback functions when the state is modified.
I added `onStateChange` and `onMessageIncrement` methods to register callbacks that are called when the state is changed and when the message count is incremented, respectively. This was done so we no longer need to do things like `@observes("trackingState.states")` in other Ember classes.
I split up giant functions like `sync` and `establishChannels` into smaller functions for readability and testability, and renamed many small functions to _functionName to designate them as private functions which not be called by consumers of `topicTrackingState`. Public functions are now all documented (well...at least ones that are not immediately obvious).
----
On the backend side, I have changed the MessageBus publish events for TopicTrackingState to send back tags and tag IDs for more channels, and done some extra code cleanup and refactoring. Plugins may override `TopicTrackingState.report` so I have made its footprint as small as possible and externalised the main parts of it into other methods.
When building the `scss_load_paths`, we were creating a full export of the theme (including uploads), and not cleaning it up. With many uploads, this can be extremely slow (because it downloads every upload from S3), and the lack of cleanup could cause a disk to fill up over time.
This commit updates the ZipExporter to provide a `with_export_dir` API, which takes care of cleanup. It also adds a kwarg which allows exporting only extra_scss fields. This should make things much faster for themes with many uploads.
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
For sites with login_required set to true, counting anonymous pageviews is
confusing. Requests to /login and other pages would make it look like
anonymous users have access to site's content.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
* DEV: Give a nicer error when `--proxy` argument is missing
* DEV: Improve Ember CLI's bootstrap logic
Instead of having Ember CLI know which URLs to proxy or not, have it try
the URL with a special header `HTTP_X_DISCOURSE_EMBER_CLI`. If present,
and Discourse thinks we should bootstrap the application, it will
instead stop rendering and return a HTTP HEAD with a response header
telling Ember CLI to bootstrap.
In other words, any time Rails would otherwise serve up the HTML for the
Ember app, it stops and says "no, you do it."
* DEV: Support asset filters by path using a new options object
Without this, Ember CLI's bootstrap would not get the assets it wants
because the path it was requesting was different than the browser path.
This adds an optional request header to fix it.
So far this is only used by the styleguide.
Note that this commit is also fixing various mistakes in emojis.
Some of them have been fixed manually in db.json/data.js/groups.json and will need to be fixed in emoji-db gem.
* FEATURE: Review every post using the review queue.
If the `review_every_post` setting is enabled, posts created and edited by regular uses are sent to the review queue so staff can review them. We'll skip PMs and posts created or edited by TL4 or staff users.
Staff can choose to:
- Approve the post (nothing happens)
- Approve and restore the post (if deleted)
- Approve and unhide the post (if hidden)
- Reject and delete it
- Reject and keep deleted (if deleted)
- Reject and suspend the user
- Reject and silence the user
* Update config/locales/server.en.yml
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Rails 6.1.3.1 deprecates a few API and has some internal changes that break our tests suite, so this commit fixes all the deprecations and errors and now Discourse should be fully compatible with Rails 6.1.3.1. We also have a new release of the rails_failover gem that's compatible with Rails 6.1.3.1.
There is a category setting that enforces 1 or more tags must be added to a topic from a specific tag group before creating it. This validation was not being run before the topic was being sent to a review queue for categories that have that setting enabled.
There was an existing validation in `TopicCreator` but it was not correct; it was only validating when the tags did _not_ exist and also only happened on `create`. I now run the validation in `TopicCreator.valid?`
I also improved the error message shown to the user when they have not added the tags required (showing the tag names from the tag group), and changed the composer tag selector to not show "optional" if there are N tags required from a certain group.
* DEV: ensures stylesheet watcher isn't crashing with gems plugins
This bug has been exhibited since discourse_dev is now including an auth plugin which was loaded as a relative path instead of an absolute path, eg:
`Users/bob/.gem/ruby/2.6.6/gems/discourse_dev-0.1.0/auth/plugin.rb`
Instead of
`/Users/bob/.gem/ruby/2.6.6/gems/discourse_dev-0.1.0/auth/plugin.rb`
Let's say you want to use a gem in a plugin that has a dependencie.
You would write something like this:
```ruby
gem 'dependency-gem', '1.2.3'
gem 'amazing-gem', '4.5.6'
```
However, since when we install a plugin gem we install it in the `gems`
directory created inside the plugins directory, when it comes the time
to install the `amazing-gem`, it won't be able to find the `dependency-gem`.
This fixes that issue by adding the `gems` plugins directory to the global gem path.
Also fixed a frozen string error when specifying a source.
CookedPostProcessor used Loofah to parse the cooked content of a post
and Nokogiri to parse cooked Oneboxes. Even though Loofah is built on
top of Nokogiri, replacing an element from the cooked post (a Nokogiri
node) with a parsed onebox (a Loofah node) produced a strange result
which included XML namespaces. Removing the mix and using Loofah
to parse Oneboxes fixed the problem.
* FIX: Use theme color for anchor icon
* FIX: Do not count anchor links
* FIX: Do not count hashtags links either
* DEV: Add tests for link_count
* FIX: Disable anchors in quotes and preview
* FIX: Try building some anchor slugs for unicode
* DEV: Fix tests
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
Followup to 5deda5ef3e
The first argument to `Open3.capture3` can be an environment variable hash. In this case, we need to insert the `timeout` command after the env hash.
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to how Discourse processes JavaScript that comes with themes/components, and these refactors may break your JS customizations; see https://meta.discourse.org/t/upcoming-core-changes-that-may-break-some-themes-components-april-12/186252?u=osama for details on how you can check if your themes/components are affected and what you need to do to fix them.
This commit also improves theme error handling in Discourse. We will now be able to catch errors that occur when theme initializers are run and prevent them from breaking the site and other themes/components.
`GlobalSetting.relative_url_root` comes from the destination site. We
can't be sure whether it was the same on the original site. It's safer
to use a wildcard here, so we can backup/restore sites with different
relative_url_root values.
Previously certain images may lead to convert / identify to run for unreasonable
amounts of time
This adds a maximum amount of time these commands can run prior to forcing
them to stop
Previously we used the raw data indexed to generate blurbs even for cases
when Chinese/Korean/Japanese text was used.
This caused superfluous spaces to show up in excerpts.
To add an extra layer of security, we sanitize settings before shipping them to the client. We don't sanitize those that have the "html" type.
The CookedPostProcessor already uses Loofah for sanitization, so I chose to also use it for this. I added it to our gemfile since we installed it as a transitive dependency.
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to internal code that's responsible for processing themes/components in Discourse, most notably:
* `<script type="text/discourse-plugin">` tags are automatically converted to modules.
* The `theme-settings` service is removed in favor of a simple `lib` file responsible for managing theme settings. This was done to allow us to register/lookup theme settings very early in our Ember app lifecycle and because there was no reason for it to be an Ember service.
These refactors should 100% backward compatible and invisible to theme developers.
This feature used to be controlled by two site settings
enable_personal_email_messages and min_trust_to_send_email_messages.
I removed enable_personal_email_messages and unhide
min_trust_to_send_email_messages to simplify the process of
enabling / disabling this feature.
* FEATURE: Cache successful HTTP GET requests during Oneboxing
Some oneboxes may fail if when making excessive and/or odd requests against the target domains. This change provides a simple mechanism to cache the results of succesful GET requests as part of the oneboxing process, with the goal of reducing repeated requests and ultimately improving the rate of successful oneboxing.
To enable:
Set `SiteSetting.cache_onebox_response_body` to `true`
Add the domains you’re interesting in caching to `SiteSetting. cache_onebox_response_body_domains` e.g. `example.com|example.org|example.net`
Optionally set `SiteSetting.cache_onebox_user_agent` to a user agent string of your choice to use when making requests against domains in the above list.
* FIX: Swap order of duration and value in redis call
The correct order for `setex` arguments is `key`, `duration`, and `value`.
Duration and value had been flipped, however the code would not have thrown an error because we were caching the value of `1.day.to_i` for a period of 1 seconds… The intention appears to be to set a value of 1 (purely as a flag) for a period of 1 day.
This is called in DiscourseTagging.tag_topic_by_names only after
all the validations etc. have been passed, and after topic.tags = X
has been called (because this is when the associations are created/
destroyed). The event has the topic, then a second param with the
old and new tag names in arrays for easy inspection.
I was adding specs to ensure that post actions and uploads are removed for permanently deleted posts.
I noticed that post revisions were not permanently destroyed. I added a migration to fix old data.
The instance of the PostRevisor is passed to the post_edited
event. It is useful to know what has happened to the topic in
this event (we already pass a boolean for topic_changed? but that
is not so helpful by itself).
* DEV: upgrade mini_sql
Even though we are not planning on using this quite yet, mini_sql now supports
prepared statements.
Would like this upgrade merged so we can do some benchmarking.
Note, this will not work with pg_bouncer, but sites that are not using it
may benefit from the feature.
* implement multisite friendly prepared statements
Fixes `Rack::Lint::LintError: a header value must be a String, but the value of 'Retry-After' is a Integer`. (see: 14a236b4f0/lib/rack/lint.rb (L676))
I found it when I got flooded by those warning a while back in a test-related accident 😉 (ember CLI tests were hitting a local rails server at a fast rate)
browser-update script does not work correctly in some very old browsers
because the contents of <noscript> is not accessible in JavaScript.
For these browsers, the server can display the crawler page and add the
browser update notice.
Simply loading the browser-update script in the crawler view is not a
solution because that means all crawlers will also see it.
The regular expression to detect private IP addresses did not always detect them successfully.
Changed to use ruby's in-built IPAddr.new(ip_address).private? method instead
which does the same thing but covers all cases.
Users can now pin bookmarks from their bookmark list. This will anchor the bookmark to the top of the list, and show a pin icon next to it. This also applies in the nav bookmarks panel. If there are multiple pinned bookmarks they sort by last updated order.
This PR adds MethodProfiler.output_sql_to_stderr! for easier debugging of SQL queries and their timings from the console.
This is almost the same as ensure_discourse_instrumentation! but should not
be used in production (save for debugging in the console), and is only instrumenting
PostgresSQL queries.
This is almost the same as ensure_discourse_instrumentation! but should not
be used in production. This logs all SQL queries run and their durations
between start and stop.
It also works for super long running queries. If you interrupt the long-running
query the latest query data will still be logged after stopping the profiler.
Usage:
```
MethodProfiler.output_sql_to_stderr!(filter_transactions: true)
MethodProfiler.start
# some code that runs queries
timings = MethodProfiler.stop
```
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
Highlight.js changed their default branch from master to main. This switches to the @highlightjs/cdn-assets package, thus sidestepping the problem. It's a slightly cleaner integration though (no need to build locally anymore).
Component SCSS compilation should use the current theme's SCSS color
variables as a fallback before using the default core colors.
This is mostly a backwards-compatibility fix, new themes and components
should use CSS custom properties, which offer better support for on-the-fly
color scheme changes (dark mode support, etc.).
This is not a security issue because regular users are not allowed to insert FA icons anywhere in the app. Admins can insert icons via custom badges, but they do have the ability to create themes with JS.
Get rid of deprecation related to Zeitwerk autoloader.
Original PR was reverted because of multisite bug #12381 - thank you @davidtaylorhq for fixing it.
I added the last commit to fix that multisite problem.
Previosly, if the topic embed request had a missing username parameter,
and SiteSetting.embed_by_username was empty we would fail to create the
new topic and not show any errors.
Now we will fallback using the priority:
1. Username parameter
2. SiteSetting.embed_by_username
3. SiteSetting.site_contact_username
4. system user
Staff can send a post to the review queue by clicking the "Flag Post" button next to "Take Action...". Clicking it flags the post using the "Notify moderators" score type and hides it. A custom message will be sent to the user.
It has been observed that doing a HEAD against an Amazon store URL may result in a 405 error being returned.
Skipping the HEAD request may result in an improved oneboxing experience when requesting these URLs.
The user and an admin could create multiple email change requests for
the same user. If any of the requests was validated and it became
primary, the other request could not be deleted anymore.
Added a new task to test if indexes are coherent with a blank database
This allows us to detect for cases where somehow indexes are out of sync
FIX_INDEXES=1 or `rake db:validate_indexes[fix]` to correct the issues it finds.
Detects:
- Badly named indexes that need to be renamed
- Missing indexes
- Extra indexes
Can correct all 3 with the fix option
* FEATURE: allow category group moderators to pin/unpin topics
Category group moderators should be able to pin/unpin any topics within a category where they have appropraite category group moderator permissions.
Prior to this change, we had weights for very_high, high, low and
very_low. This means there were 4 weights to tweak and what weights to
use for `very_high/high` and `very_low/low` pair was hard to explain.
This change makes it such that `very_high` search priority will always
ensure that the posts are ranked at the top while `very_low` search
priority will ensure that the posts are ranked at the very bottom.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
We were sending 2 emails for user silencing if a message was provided in the UI. Also always send email for user silence and user suspend with reason regardless of whether message provided.
SVG files can have dimensions expressed in inches, centimeters, etc., which may lead to the dimensions being misinterpreted (e.g. “8in” ends up as 8 pixels).
If the file type is `svg`, ask ImageMagick to work out what size the SVG file should be rendered on screen.
NOTE: The `pencil.svg` file was obtained from https://freesvg.org/1534028868, which has placed the file in to the public domain.
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
- removes the option from site settings
- deletes the site setting on existing sites that have it
- marks posts using emojis as requiring a rebake
Note that the actual image files are not removed here, the plan is to
remove them in a few weeks/months (when presumably the rebaking of old
posts has been completed).
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
`Onebox.preview` can return 0-to-n errors, where the errors are missing OpenGraph attributes (e.g. title, description, image, etc.). If any of these attributes are missing, we construct an error message and attach it to the Oneboxer preview HTML. The error message is something like:
“Sorry, we were unable to generate a preview for this web page, because the following oEmbed / OpenGraph tags could not be found: description, image”
However, if the only missing tag is `image` we don’t need to display the error, as we have enough other data (title, description, etc.) to construct a useful/complete Onebox.
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
Uses discourse/onebox@ff9ec90
Adds a hidden site setting called disable_onebox_media_download_controls which will add controlslist="nodownload" to video and audio oneboxes, and also to the local video and audio oneboxes within Discourse.
`rake emails:test` task was always sending `localhost` as the domain name rather than using `smtp[:domain]` (aka `DISCOURSE_SMTP_DOMAIN`. `discourse-setup` has recently been modified to always set `DISCOURSE_SMTP_DOMAIN`, so it's important that this test rake task actually use the value.
I tested this change on a standard production install, and it's working as expected. Hopefully I managed not to bungle the copy/paste of the single line here in the github edit window.
Co-authored-by: Jay Pfaffman <jay@literatecomputing.com>
Previously we were checking truthiness in some places, and `== true` in
others. That can lead to some inconsistent UX where the interface says
the email is valid, but account creation fails.
This commit ensures values are boolean when set, and raises an error for
other value types.
If this safety check is triggered, it means the specific auth provider
needs to be updated to pass booleans.
Version 2.8 brings some changes to how address fields are handled and
this commits updates that and should also include a fix which handles
encoded attachment filenames.
The fork contains a bugfix to correctly decode mail attachments.
NewPostManager’s `post_needs_approval_in_its_category` method should allow category group moderators to create topics/reply to topics that where they have appropraite permissions.
(ie, if a user has permission to moderate a post, any posts made by them shouldn’t be sent to moderation)
`UX` is the officially supported prefix per https://meta.discourse.org/t/19392, but sometimes `UI` is used instead. We should still include those commits.
Adding a scope from a plugin was broken. This commit fixes it and adds a test.
It also documents the instance method and renames the serialized "id" attribute to "scope_id" to avoid a conflict when the scope also has a parameter with the same name.
`convert_to_jpeg!` is only called if `convert_png_to_jpeg?` and/or `should_alter_quality?` is true.
`convert_png_to_jpeg?` can be disabled by setting `SiteSetting.png_to_jpg_quality` to 100.
However, `should_alter_quality?` could be true if `SiteSetting.recompress_original_jpg_quality` was lower than the quality of the uploaded file, regardless of file type.
This commits changes `should_alter_quality?` so that uploaded png files will use the `SiteSetting.png_to_jpg_quality` value, rather than ``SiteSetting.recompress_original_jpg_quality` value.
Still excludes GitHub avatars. Those were the original reason for adding
this broad exclusion. Context at https://meta.discourse.org/t/165713/4
If we find more oneboxes which are unsuitable for thumbnails, we can add
them to this selector.
If no email is provided, email_valid should be set false, so that
Discourse can prompt the user for an email and verify it.
This fixes signups via twitter for accounts with no email address.
Previously we would always take the first image in a post to use as the
thumbnail. On media-heavy sites, users may want to manually select a
specific image as the topic thumbnail. This commit allows this to be
done via a `|thumbnail` attribute in markdown.
For example, in this case, bbb would be chosen as the thumbnail:
```
```
Using our testing Docker image (`discourse/discourse_test:release`) allows us to drop "Update imagemagick" step which shaves ~10 minutes from all runs.
The bug was mentioned on meta https://meta.discourse.org/t/users-are-seeing-handling-of-unhandled-tag-again/155367
It was related to users who are watching a specific topic. In that case, when the hidden tag was added or removed to the topic they were notified by `NotifyTagChangeJob`.
That job should take hidden tags into consideration. If all changed tags are in a hidden group, it should exclude user not belong to that group.
At the same time, if visible to anyone tag is added or removed users watching topic should be notified.
You can use `discourse restore --location=local FILENAME` if you want to restore a backup that is stored locally even though the `backup_location` has the value `s3`.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
Previous markup used to be
```
<div>
<div>
<li>
```
Instead we will now have:
```
<ul>
<li>
<div>
```
Note this commit also adds two things:
- ability to override tagName of a widget when attaching it
- ability to pass opts and otherOpts to {{attach}}, it could be useful in templates but is mostly useful to test `tagName` for now
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This encompasses a lot of work done over the last year, much of which
has already been merged into master. This is the final set of changes
required to get Ember CLI running locally for development.
From here on it will be bug fixes / enhancements.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
To prevent opaque cache files, now all the CDN files will be requested in 'cors' mode if the cdn_cors_enabled global setting is enabled. Before enabling the setting, should enable the cors in the CDN server by adding the response header `access-control-allow-origin: *` or `access-control-allow-origin: https://discourse.example.com.`
And other external file requests other than CDN will not be cached if the response type is opaque.
Disabling shared drafts used to leave topics in an inconsistent state
where they were not displayed as shared drafts and thus there was no
way of publishing them. Moreover, they were accessible just to users
who have permissions to create shared drafts.
This commit adds another permission check that is used for most
operations and the old can_create_shared_draft? remains used just when
creating a new shared draft.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
A simplified version of the logic used in the function before my fix is as follow:
```ruby
result = []
things = [0,1,2,3]
max_values = 2
every = (things.size.to_f / max_values).ceil
things.each_with_index do |t, index|
next unless (t % every) === 0
result << t
end
p result # [0, 2]
# 3 doesn’t get included
```
The problem is that if you get unlucky two times you won't get last tuple(s) and might get a very erroneous date.
Double unlucky:
- last tuple index % computed every !== 0 and you don't get the last tuple
- the last tuple is related to a post with a very different date than the previous tuples (on year difference in our case)
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
It returned a 429 error code with a 'Retry-After' header if a
RateLimiter::LimitExceeded was raised and unhandled, but the header was
missing if the request was limited in the 'RequestTracker' middleware.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
Transient errors in migration are ignored, silently corrupting
data, and the migration is incomplete and misses many sources of
uploads, which will lead to an incorrect expectation of independence
from the remote object storage after announcing that the migration
was successful, regardles of whether transient errors permanently
corrupted the data.
Remove this migration until such time as it is re-written to
follow the same pattern has the migration to s3, moving the
core logic out of the task.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
This PR adds functionality for the IMAP sync code to detect if a UID that is missing from the mail group mailbox is in the Spam/Junk folder for the mail account, and if so delete the associated Discourse topic. This is identical to what we do for emails that are moved for Trash.
If an email is missing but not in Spam or Trash, then we mark the incoming email record with imap_missing: true. This may be used in future to further filter or identify these emails, and perhaps go hunting for them in the email account in bulk.
Note: This adds some code duplication because the trash and spam email detection and handling is very similar. I intend to do more refactors/improvements to the IMAP sync code in time because there is a lot of room for improvement.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
If the sliding window size is N seconds, then a moment at the Nth second
should be considered as the moment outside of the sliding window.
Otherwise, if the sliding window is already full, at the Nth second,
a new call wouldn't be allowed, but a time to wait before the next call
would be equal to zero, which is confusing.
In other words, the end of the time range shouldn't be included in the
sliding window.
Let's say we start at the second 0, and the sliding window size is 10
seconds. In the current version of rate limiter, this sliding window will
be considered as a time range [0, 10] (including the end of the range),
which actually is 11 seconds in length.
After this fix, the time range will be considered as [0, 10)
(excluding the end of the range), which is exactly 10 seconds in length.
It was a problem because during this operation only the first frame
is kept. This commit removes the alternative solution to check if a GIF
image is animated.
* DEV: TopicTrackingState calls should happen in the background
It was observed that calling TopicTrackingState on popular topics could result in a large number of calls to redis, resulting in slow response times when posting replies.
These calls should be moved to a background job.
* DEV: PostUpdateTopicTrackingState should execute on default queue
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
* FIX: Inline onebox should use encoding from Content-Type header when present
* Use Regexp.last_match(1)
Signed-off-by: OsamaSayegh <asooomaasoooma90@gmail.com>
