We changed (https://github.com/discourse/discourse/pull/13407) behaviour of the topic level bookmark button recently. That PR made the button be opening the edit bookmark modal when there is only one bookmark on the topic instead of just removing that bookmark as it was before.
This PR fixes the next problems that weren't taken into account in the previous PR:
1. Everything should work fine even on very big topics when a bookmarked post is unloaded from the post stream. I've added code that loads the post we need and makes everything work as expected
2. When at least one bookmark on the topic has a reminder, we should always be showing the icon with a clock on the topic level bookmark button
3. We should show correct tooltips for the topic level bookmark button
We do not want to show the In Reply To section of the
group SMTP email template, it is similar to Context Posts
which we removed and is unnecessary.
This PR also removes the link to staged user profiles in
the email; their email addresses will just be converted
to regular mailto: links.
This PR makes several changes to the group SMTP email contents to make it look more like a support inbox message.
* Remove the context posts, they only add clutter to the email and replies
* Display email addresses of staged users instead of odd generated usernames
* Add a "please reply above this line" message to sent emails
This PR backtracks a fair bit on this one https://github.com/discourse/discourse/pull/13220/files.
Instead of sending the group SMTP email for each user via `UserNotifications`, we are changing to send only one email with the existing `Jobs::GroupSmtpEmail` job and `GroupSmtpMailer`. We are changing this job and mailer along with `PostAlerter` to make the first topic allowed user the `to_address` for the email and any other `topic_allowed_users` to be the CC address on the email. This is to cut down on emails sent via SMTP, which is subject to daily limits from providers such as Gmail. We log these details in the `EmailLog` table now.
In addition to this, we have changed `PostAlerter` to no longer rely on incoming email email addresses for sending the `GroupSmtpEmail` job. This was unreliable as a user's email could have changed in the meantime. Also it was a little overcomplicated to use the incoming email records -- it is far simpler to reason about to just use topic allowed users.
This also adds a fix to include cc_addresses in the EmailLog.addressed_to_user scope.
* FEATURE: Staff can receive pending user reminders more frequently.
We now express the "pending_users_reminder_delay" in minutes instead of hours so staff can have finer control over the delay.
We need to keep in mind that the reminders could still take up to 20 minutes, even when using a lower value. We send them from a scheduled job.
* Migrate to a new site setting for the reminders delay
ATM it only implements server side of it, as my need is for automation purposes. However it should probably be added in the UI too as it's unexpected to have pinned_until and no bannered_until.
Badges that are awarded multiple times can be favorite and not favorite
at the same time. This caused few problems when users tried to favorite
them as they were counted multiple times or their state was incorrectly
displayed.
Previously, we were storing custom svg sprite paths in the cache. This is a problem because sprites in themes get stored as uploads, and the returned paths were files in the temporary download cache which could sometimes be cleaned up, resulting in a broken cache.
I previously tried to fix this by skipping the missing files and clearing the cache, but that didn't work out well with CDNs. This PR stores the contents of the files in the custom_svg_sprites cache to avoid the problem of missing temp files.
Also, plugin custom icons are only included if the plugin is enabled.
In #12841, we started setting the ReviewableQueuedPost's target and topic after approving it instead of storing them in the payload. As a result, the reviewable_counts query started to include queued posts.
When a category is set to require approval, every post has an associated reviewable. Pointing that each post has an associated queued post is not necessary in this case, so I added a WHERE clause to skip them.
This adds the following columns to EmailLog:
* cc_addresses
* cc_user_ids
* topic_id
* raw
This is to bring the EmailLog table closer in parity to
IncomingEmail so it can be better utilized for Group SMTP
and IMAP mailing.
The raw column contains the full content of the outbound email,
but _only_ if the new hidden site setting
enable_raw_outbound_email_logging is enabled. Most sites do not
need it, and it's mostly required for IMAP and SMTP sending.
In the next pull request, there will be a migration to backfill
topic_id on the EmailLog table, at which point we can remove the
topic fallback method on EmailLog.
Before this change, calling `StyleSheet::Manager.stylesheet_details`
for the first time resulted in multiple queries to the database. This is
because the code was modelled in a way where each `Theme` was loaded
from the database one at a time.
This PR restructures the code such that it allows us to load all the
theme records in a single query. It also allows us to eager load the
required associations upfront. In order to achieve this, I removed the
support of loading multiple themes per request. It was initially added
to support user selectable theme components but the feature was never
completed and abandoned because it wasn't a feature that we thought was
worth building.
We already reject email replies to public topics via `SiteSetting.disallow_reply_by_email_after_days` and raising the `OldDestinationError`. This PR introduces similar behaviour for group inboxes, but without the rejection, and **only when SMTP is enabled for the group**.
If a reply is sent via email and the post is older than `SiteSetting.disallow_reply_by_email_after_days` days ago, then we create a new topic instead of making a reply in the old one and link back to the original topic. This is done to prevent long running group inbox discussions.
If a user posted a URL that appeared inside a Onebox, then the user
got a duplicate link notice. This was fixed by skipping those links in
Ruby.
If a user posted a URL that was Oneboxes and contained other links that
appeared in previous posts, then the user got a duplicate link notice.
This was fixed by skipping those links in JavaScript.
The generated regular expressions did not contain \b which matched
every text that contained the word, even if it was only a substring of
a word.
For example, if "art" was a watched word a post containing word
"artist" matched.
When we are emailing people from a group inbox, we are having
a PM conversation with them, as a support account would. In this
case mailing list headers do not make sense. It is not like a forum
topic where you may have tens or hundreds of participants -- it is a
conversation between the group and a small handful of people
directly contacting the group, often just one person.
The only header left in tact was List-Unsubsribe which is important
for letting people opt out to notifications.
* FIX: Allow SVG uploads if dimensions are a fraction of a unit
`UploadCreator` counts the number of pixels in an file to determine if it is valid. `pixels` is calculated by multiplying the width and height of the image, as determined by FastImage.
SVG files can have their width/height expressed in a variety of different units of measurement. For example, ‘px’, ‘in’, ‘cm’, ‘mm’, ‘pt’, ‘pc’, etc are all valid within SVG files. If an image has a width of `0.5in`, FastImage may interpret this as being a width of `0`, meaning it will report the `size` as being `0`.
However, we don’t need to concern ourselves with the number of ‘pixels’ in a SVG files, as that is irrelevant for this file format, so we can skip over the check for `pixels == 0` when processing this file type.
* DEV: Speed up getting SVG dimensions
The `-ping` flag prevents the entire image from being rasterized before a result is returned. See:
https://imagemagick.org/script/command-line-options.php#ping
The first thing we needed here was an enum rather than a boolean to determine how a directory_column was created. Now we have `automatic`, `user_field` and `plugin` directory columns.
This plugin API is assuming that the plugin has added a migration to a column to the `directory_items` table.
This was created to be initially used by discourse-solved. PR with API usage - https://github.com/discourse/discourse-solved/pull/137/
Anonymizing a user changed their email address, destroyed all
associated InvitedUser records, but did not destroy the invites
associated to user's email.
Profiling showed that we were roughly 10% of a request time creating all
the ActiveRecord objects for categories in the `Site` model on a site with 61 categories.
Instead of querying for the categories each time based on which categories the user can see,
we can just preload all of the categories upfront and filter out the
categories that the user can not see.
When dismissing new topics for the Tracked filter, the dismiss was
limited to 30 topics which is the default per page count for TopicQuery.
This happened even if you specified which topic IDs you were
selectively dismissing. This PR fixes that bug, and also moves
the per_page_count into a DEFAULT_PER_PAGE_COUNT for the TopicQuery
so it can be stubbed in tests.
Also moves the unused stub_const method into the spec helpers
for cases like this; it is much better to handle this in one place
with an ensure. In a follow up PR I will clean up other specs that
do the same thing and make them use stub_const.
When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
Leaking state and non-obvious order (before :all runs *before* RailsHelper.test_setup) are not worth it.
A replacement PR for #13370. Fixes some flaky specs, e.g.
```
bin/rspec './spec/components/freedom_patches/translate_accelerator_spec.rb[1:3]' './spec/jobs/clean_up_user_export_topics_spec.rb[1:1]' --tag ~type:multisite --seed 35994
```
Also included:
* DEV: No need for locale reset (we do it anyway in rails_helper in `test_setup`)
Since we use the event to perform additional validations on the file, we should check if it added any errors to the upload before saving it. This change makes the UploadCreator more consistent since we no longer have to rely on exceptions.
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
When replying to a user_private_message email originating from
a group PM that does _not_ have a reply key (e.g. when replying
directly to the group's SMTP address), we were mistakenly linking
the new post created from the reply to the OP and the user who
created the topic, based on the first IncomingEmail message ID in
the topic, rather than using the correct reply to user and post number
that the user actually replied to.
We now use the In-Reply-To header to look up the corresponding EmailLog
record when the user who replied was sent a user_private_message email,
and use the post from that as the reply_to_user/post.
This also removes superfluous filtering of incoming_email records. After
already filtering by message_id and then addressed_to_user (which only
returns incoming emails where the to, from, or cc address includes any
of the user's emails), we were filtering again but in the ruby code for
the exact same conditions. After removing this all existing tests still
pass.
If force_https is enabled all resource (including markdown preview and so on) will be accessed using HTTPS
If for any reason you attempt to link to non HTTPS reachable content content may appear broken
The `ember_jquery` bundle contains production builds of Ember and jQuery
which doesn't work with tests. This commits introduces a new
`theme_qunit_vendor` bundle which is copy of the `vendor` bundle but
doesn't contain `ember_jquery`.
This commit is a partial revert of
409c8585e4
The error was:
```
Jobs::Onceoff can run all once off jobs without errors
Failure/Error: j.new.execute_onceoff(nil)
TypeError:
can't create instance of singleton class
# ./spec/integrity/onceoff_integrity_spec.rb:13:in `new'
# ./spec/integrity/onceoff_integrity_spec.rb:13:in `block (3 levels) in <main>'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `each'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `block (2 levels) in <main>'
# ./spec/rails_helper.rb:279:in `block (2 levels) in <top (required)>'
# ./bundle/ruby/2.7.0/gems/webmock-3.13.0/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
```
Sometimes the class found by `ObjectSpace.each_object(Class)` would be e.g:
`#<Class:#<Jobs::MigrateBadgeImageToUploads:0x00007f96f8277400>>`
…instead of e.g:
`#<Jobs::MigrateBadgeImageToUploads:0x00007f96ffa59540>`
This commit changes the `#select` to filter out those classes.
* FIX: Quoting Oneboxed content should exclude formatting
When a post is quoted that includes Oneboxed content, we should not include the formatting generated by the Onebox. Rather, we should attempt to collapse the link referenced by the Onebox to a single line text link.
* DEV: fix tests
Over the years we have found that a few communities never discovered tags.
Instead of having them default off we now have them default on, ensuring
that everyone finds out about them.
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
IMDb movie links were being rendered as posters. This was because
IMDb was sending `og:type` as `image` randomly in some cases. To
fix this we'll now default all IMDb links as article type. This will
ensure that the IMDb onebox link includes all the information instead
of showing just a poster without any context.
When a group only has SMTP enabled and not IMAP, we do not
want to enqueue the :group_smtp_email job because using the group's
SMTP credentials for sending user_private_message emails is
handled by the UserNotifications class.
We do not want the :group_smtp_email job to be enqueued because
that uses a reply key instead of the group.email_username
for the reply-to address which is not what we want for SMTP
only, and also creates an IncomingEmail record to prevent IMAP
double syncing which we do not need either.
There is an open question about what happens when IMAP is
enabled after SMTP has been enabled for a while, and also questions
around whether we could do away with :group_smtp_email altogether
and handle everything via EmailLog and UserNotifications, adding
additional columns to the former and modifying the Imap::Sync
class to take this into account...a lot more further testing
for IMAP needs to be done to answer those questions.
For now, this fix should be sufficient to get the correct
reply-to address for user_private_response messages sent in
response to emails sent directly to the group's
email_username SMTP address.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
In Ember CLI addons get put into the vendor bundle, as opposed to their
own bundle like we're doing in the Rails app. We never use pretty-text
without our vendor bundle so this should have no difference on
performance.
We need to keep the pretty-text bundle for server side cooking.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
This improves the display of available tags in categories that are
configured to require at least (x) tags from a tag group.
There are two changes included:
- regular users will now see all the available tags in the required tag
group (previously they could see a max. of 5 tags)
- staff users will now see the tags from the required tag group when
the tag group contains more tags than the default limit (also set to 5)
Both changes only apply to the default query (i.e. no search terms).
It used to require SiteSetting.min_trust_level_to_allow_invite to
invite a user to a group, even if the user existed and the inviter was
a group owner.
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
When a topic is fully merged into another topic we close it and schedule its deleting. But, because of a bug, if the merged topic contains some moderator actions or small actions it won't be merged. This change fixes this problem.
An important note: in general, we don't want to close a topic after moving posts if it still contains some regular posts or whispers. But when we are moving posts to a private message we don't want the notice about it to be publicly visible. So we use whispers with action_code == 'split_topic' instead of small_actions in such cases and we should ignore this specific kind of whispers when decide if we should close the merged topic.
