In b8c8909a9d, we introduced a regression
where users may have had their `UserStat.first_unread_pm_at` set
incorrectly. This commit introduces a migration to reset `UserStat.first_unread_pm_at` back to
`User#created_at`.
Follow-up to b8c8909a9d.
Similar to site settings, adds support for `refresh` option to theme settings.
```yaml
super_feature_enabled:
type: bool
default: false
refresh: true
```
We are pushing /notification-alert/#{user_id} and /notification/#{user_id}
messages to MessageBus from both PostAlerter and User#publish_notification_state.
This can cause memory issues on large sites with many users. This commit
stems the bleeding by only sending these alert messages if the user
in question has been seen in the last 30 days, which eliminates a large
chunk of users on some sites.
When rendering the markdown code blocks we replace the
offending characters in the output string with spans highlighting a textual
representation of the character, along with a title attribute with
information about why the character was highlighted.
The list of characters stripped by this fix, which are the bidirectional
characters considered relevant, are:
U+202A
U+202B
U+202C
U+202D
U+202E
U+2066
U+2067
U+2068
U+2069
Previously, incorrect reply counts are displayed in the "top categories" section of the user summary page since we included the `moderator_action` and `small_action` post types.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
When 31035010af
was done it failed to take into account the case where the smtp_enabled
site setting was true, but the topic had no allowed groups / no
incoming email record, which caused errors for topics even with
nothing to do with group SMTP.
Uppy adds the file name as the "name" parameter in the
payload by default, which means that for things like the
emoji uploader which have a name param used by the controller,
that param will be passed as the file name. We already use
the existing file name if the name param is null, so this
commit just does further cleanup of the name param, removing
the extension if it is a filename so we don't end up with
emoji names like blah_png.
When there are multiple groups on a topic, we were selecting
the first from the topic allowed groups to act as the sender
email address when sending group SMTP replies via PostAlerter.
However, this was not ordered, and since there is no created_at
column on TopicAllowedGroup we cannot order this nicely, which
caused just a random group to be used (based on whatever postgres
decided it felt like that morning).
This commit changes the group used for SMTP sending to be the
group using the email_username of the to address of the first
incoming email for the topic, if there are more than one allowed
groups on the topic. Otherwise it just uses the only SMTP enabled
group.
Sometimes, a user may have a malformed email such as
`test@test.com<mailto:test@test.com` their email address,
and as a topic participant will be included as a CC email
when sending a GroupSmtpEmail. This causes the CC parsing to
fail and further down the line in Email::Sender the code
to check the CC addresses expects an array but gets a string
instead because of the parse failure.
Instead, we can just check if the CC addresses are valid
and drop them if they are not in the GroupSmtpEmail job.
This only affects multisite Discourse instances (where multiple forums are served from a single application server). The vast majority of self-hosted Discourse forums do not fall into this category.
On affected instances, this vulnerability could allow encrypted session cookies to be re-used between sites served by the same application instance.
Uppy and Resumable slice up their chunks differently, which causes a difference
in this algorithm. Let's take a 131.6MB file (137951695 bytes) with a 5MB (5242880 bytes)
chunk size. For resumable, there are 26 chunks, and uppy there are 27. This is
controlled by forceChunkSize in resumable which is false by default. The final
chunk size is 6879695 (chunk size + remainder) whereas in uppy it is 1636815 (just remainder).
This means that the current condition of uploaded_file_size + current_chunk_size >= total_size
is hit twice by uppy, because it uses a more correct number of chunks. This
can be solved for both uppy and resumable by checking the _previous_ chunk
number * chunk_size as the uploaded_file_size.
An example of what is happening before that change, using the current
chunk number to calculate uploaded_file_size.
chunk 26: resumable: uploaded_file_size (26 * 5242880) + current_chunk_size (6879695) = 143194575 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (5242880) = 141557760 >= total_size (137951695) ? YES
chunk 27: uppy: uploaded_file_size (27 * 5242880) + current_chunk_size (1636815) = 143194575 >= total_size (137951695) ? YES
An example of what this looks like after the change, using the previous
chunk number to calculate uploaded_file_size:
chunk 26: resumable: uploaded_file_size (25 * 5242880) + current_chunk_size (6879695) = 137951695 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (25 * 5242880) + current_chunk_size (5242880) = 136314880 >= total_size (137951695) ? NO
chunk 27: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (1636815) = 137951695 >= total_size (137951695) ? YES
Same issue as 28b00dc6fc, the
Mocha::ExpectationError inherits from Exception instead
of StandardError so RspecErrorTracker does not show the
actual failed expectation in request specs, the status of
the response is just 500 with no further detail.
This commit adds the RailsMultisite middleware in test mode when Rails.configuration.multisite is true. This allows for much more realistic integration testing. The `multisite_spec.rb` file is rewritten to avoid needing to simulate a middleware stack.
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
Support for invites alongside DiscourseConnect was added in 355d51af. This commit fixes the guardian method so that the bulk invite button functionality also works.
* FIX: Preserve field types when updating revision
When a post was edited quickly twice by the same user, the old post
revision was updated with the newest changes. To check if the change
was reverted (i.e. rename topic A to B and then back to A) a comparison
of the initial value and last value is performed. If the check passes
then the intermediary value is dismissed and only the initial value and
the last ones are preserved. Otherwise, the modification is dismissed
because the field returned to its initial value.
This used to work well for most fields, but failed for "tags" because
the field is an array and the values were transformed to strings to
perform the comparison.
* FIX: Reset last_editor_id if revision is reverted
If a post was revised and then the same revision was reverted,
last_editor_id was still set to the ID of the user who last edited the
post. This was a problem because the same person could then edit the
same post again and because it was the same user and same post, the
system attempted to update the last one (that did not exist anymore).
This commit introduces a new s3:ensure_cors_rules rake task
that is run as a prerequisite to s3:upload_assets. This rake
task calls out to the S3CorsRulesets class to ensure that
the 3 relevant sets of CORS rules are applied, depending on
site settings:
* assets
* direct S3 backups
* direct S3 uploads
This works for both Global S3 settings and Database S3 settings
(the latter set directly via SiteSetting).
As it is, only one rule can be applied, which is generally
the assets rule as it is called first. This commit changes
the ensure_cors! method to be able to apply new rules as
well as the existing ones.
This commit also slightly changes the existing rules to cover
direct S3 uploads via uppy, especially multipart, which requires
some more headers.
FinalDestination's follow_canonical mode used for embedded topics should work when canonical URLs are relative, as specified in [RFC 6596](https://datatracker.ietf.org/doc/html/rfc6596)
Previously, suppressed category topics are included in the digest emails if the user visited that topic before and the `TopicUser` record is created with any notification level except 'muted'.
We are no longer able to display the image returned by Instagram directly within a Discourse site (either in the composer, or within a cooked post within a topic), so:
- Display an image placeholder in the composer preview
- A cooked post should use an iframe to display the Instagram 'embed' content
* DEV: Output webmock errors in request specs
In request specs, if you had not properly mocked an external
HTTP call, you would end up with a 500 error with no further
information instead of your expected response code, with an
rspec output like this:
```
Failures:
1) UploadsController#generate_presigned_put when the store is external generates a presigned URL and creates an external upload stub
Failure/Error: expect(response.status).to eq(200)
expected: 200
got: 500
(compared using ==)
# ./spec/requests/uploads_controller_spec.rb:727:in `block (4 levels) in <top (required)>'
# ./spec/rails_helper.rb:280:in `block (2 levels) in <top (required)>'
```
This is not helpful at all when you want to find what you actually
failed to mock, which is shown straight away in non-request specs.
This commit introduces a rescue_from block in the application
controller to log this error, so we have a much nicer output that
helps the developer find the issue:
```
Failures:
1) UploadsController#generate_presigned_put when the store is external generates a presigned URL and creates an external upload stub
Failure/Error: expect(response.status).to eq(200)
expected: 200
got: 500
(compared using ==)
# ./spec/requests/uploads_controller_spec.rb:727:in `block (4 levels) in <top (required)>'
# ./spec/rails_helper.rb:280:in `block (2 levels) in <top (required)>'
# ------------------
# --- Caused by: ---
# WebMock::NetConnectNotAllowedError:
# Real HTTP connections are disabled. Unregistered request: GET https://s3-upload-bucket.s3.us-west-1.amazonaws.com/?cors with headers {'Accept'=>'*/*', 'Accept-Encoding'=>'', 'Authorization'=>'AWS4-HMAC-SHA256 Credential=some key/20211101/us-west-1/s3/aws4_request, SignedHeaders=host;user-agent;x-amz-content-sha256;x-amz-date, Signature=test', 'Host'=>'s3-upload-bucket.s3.us-west-1.amazonaws.com', 'User-Agent'=>'aws-sdk-ruby3/3.121.2 ruby/2.7.1 x86_64-linux aws-sdk-s3/1.96.1', 'X-Amz-Content-Sha256'=>'test', 'X-Amz-Date'=>'20211101T035113Z'}
#
# You can stub this request with the following snippet:
#
# stub_request(:get, "https://s3-upload-bucket.s3.us-west-1.amazonaws.com/?cors").
# with(
# headers: {
# 'Accept'=>'*/*',
# 'Accept-Encoding'=>'',
# 'Authorization'=>'AWS4-HMAC-SHA256 Credential=some key/20211101/us-west-1/s3/aws4_request, SignedHeaders=host;user-agent;x-amz-content-sha256;x-amz-date, Signature=test',
# 'Host'=>'s3-upload-bucket.s3.us-west-1.amazonaws.com',
# 'User-Agent'=>'aws-sdk-ruby3/3.121.2 ruby/2.7.1 x86_64-linux aws-sdk-s3/1.96.1',
# 'X-Amz-Content-Sha256'=>'test',
# 'X-Amz-Date'=>'20211101T035113Z'
# }).
# to_return(status: 200, body: "", headers: {})
#
# registered request stubs:
#
# stub_request(:head, "https://s3-upload-bucket.s3.us-west-1.amazonaws.com/")
#
# ============================================================
```
* DEV: Require webmock in application controller if rails.env.test
* DEV: Rescue from StandardError and NetConnectNotAllowedError
The `白名单` term becomes `名单 白名单` after it is processed by
cppjieba in :query mode. However, `白名单` is not tokenized as such by cppjieba when it
appears in a string of text. Therefore, this may lead to failed matches as
the search data generated while indexing may not contain all of the
terms generated by :query mode. We've decided to maintain parity for now
such that both indexing and querying uses the same :mix mode. This may
lead to less accurate search but our plan is to properly support CJK
search in the future.
In preparation for adding automatic CORS rules creation
for direct S3 uploads, I am adding tests here and moving the
CORS rule definitions into a dedicated class so they are all
in the one place.
There is a problem with ensure_cors! as well -- if there is
already a CORS rule defined (presumably the asset one) then
we do nothing and do not apply the new rule. This means that
the S3BackupStore.ensure_cors method does nothing right now
if the assets rule is already defined, and it will mean the
same for any direct S3 upload rules I add for uppy. We need
to be able to add more rules, not just one.
This is not a problem on our hosting because we define the
rules at an infra level.
* FIX: allowed_theme_ids should not be persisted in GlobalSettings
It was observed that the memoized value of `GlobalSetting.allowed_theme_ids` would be persisted across requests, which could lead to unpredictable/undesired behaviours in a multisite environment.
This change moves that logic out of GlobalSettings so that the returned theme IDs are correct for the current site.
Uses get_set_cache, which ultimately uses DistributedCache, which will take care of multisite issues for us.
* DEV: Sanitize HTML admin inputs
This PR adds on-save HTML sanitization for:
Client site settings
translation overrides
badges descriptions
user fields descriptions
I used Rails's SafeListSanitizer, which [accepts the following HTML tags and attributes](018cf54073/lib/rails/html/sanitizer.rb (L108))
* Make sure that the sanitization logic doesn't corrupt settings with special characters
This PR doesn't change any behavior, but just removes code that wasn't in use. This is a pretty dangerous place to change, since it gets called during user's registration. At the same time the refactoring is very straightforward, it's clear that this code wasn't doing any work (it still needs to be double-checked during review though). Also, the test coverage of UserNameSuggester is good.
By default, Rails only includes the Vary:Accept header in responses when the Accept: header is included in the request. This means that proxies/browsers may cache a response to a request with a missing Accept header, and then later serve that cached version for a request which **does** supply the Accept header. This can lead to some very unexpected behavior in browsers.
This commit adds the Vary:Accept header for all requests, even if the Accept header is not present in the request. If a format parameter (e.g. `.json` suffix) is included in the path, then the Accept header is still omitted. (The format parameter takes precedence over any Accept: header, so the response is no longer varies based on the Accept header)
Not reseting the registry could lead to assets still being registered for example.
This flakky spec was reprdocible with this call: `bundle exec rspec --seed 9472 spec/components/discourse_plugin_registry_spec.rb spec/components/svg_sprite/svg_sprite_spec.rb`
Which would trigger the following error:
```
Failures:
1) DiscoursePluginRegistry#register_asset registers vendored_core_pretty_text properly
Failure/Error: expect(registry.javascripts.count).to eq(0)
expected: 0
got: 1
(compared using ==)
# ./spec/components/discourse_plugin_registry_spec.rb:248:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:280:in `block (2 levels) in <top (required)>'
# /Users/joffreyjaffeux/.gem/ruby/2.7.3/gems/webmock-3.14.0/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
```
When inviting a group to a topic, there may be members of
the group already in the topic as topic allowed users. These
can be safely removed from the topic, because they are implicitly
allowed in the topic based on their group membership.
Also, this prevents issues with group SMTP emails, which rely
on the topic_allowed_users of the topic to send to and cc's
for emails, and if there are members of the group as topic_allowed_users
then that complicates things and causes odd behaviour.
We also ensure that the OP of the topic is not removed from
the topic_allowed_users when a group they belong to is added,
as it will make it harder to add them back later.
User API keys (not the same thing as admin API keys) are currently
leaked to redis when rate limits are applied to them since redis is the
backend for rate limits in Discourse and the API keys are included in
the redis keys that are used to track usage of user API keys in the last
24 hours.
This commit stops the leak by using a SHA-256 representation of the user
API key instead of the key itself to form the redis key.
We don't need to manually delete the existing redis keys that contain
unhashed user API keys because they're not long-lived and will be
automatically deleted within 48 hours after this commit is deployed to
your Discourse instance.
This is a follow-up to https://github.com/discourse/discourse/pull/14541. This adds a hidden setting for restoring the old behavior for those users who rely on it. We'll likely deprecate this setting at some point in the future.
This commit removes the recipient's username from the
respond to / participants list that is shown at the bottom
of user notification emails. For example if the recipient's
username was jsmith, and there were participants ljones and
bmiller, we currently show this:
> "reply to this email to respond to jsmith, ljones, bmiller"
or
> "Participants: jsmith, ljones, bmiller"
However this is a bit redundant, as you are not replying to
yourself here if you are the recipient user. So we omit the
recipient user's username from this list, which is only used
in the text of the email and not elsewhere.
The method was only used for mega topics but it was redundant as the
first post can be determined from using the condition where
`Post#post_number` equal to one.
* FEATURE: Cache CORS preflight requests for 2h
Browsers will cache this for 5 seconds by default. If using MessageBus
in a different domain, Discourse will issue a new long polling, by
default, every 30s or so. This means we would be issuing a new preflight
request **every time**. This can be incredibly wasteful, so let's cache
the authorization in the client for 2h, which is the maximum Chromium
allows us as of today.
* fix tests
`/u/username/invited.json?filter=expired` and `/u/username/invited.json?filter=pending` APIs are already returning data to admins. However, the `can_see_invite_details?` boolean was false, which prevented the Ember frontend from showing the tabs correctly. This commit updates the guardian method to match reality.
* FIX: do not display add to calendar for past dates
There is no value in saving past dates into calendar
* FIX: remove postId and move ICS to frontend
PostId is not necessary and will make the solution more generic for dates which doesn't belong to a specific post.
Also, ICS file can be generated in JavaScript to avoid calling backend.
Sometimes administrators want to permanently delete posts and topics
from the database. To make sure that this is done for a good reasons,
administrators can do this only after one minute has passed since the
post was deleted or immediately if another administrator does it.
We don't want to be using emails as source for username and name suggestions in cases when it's possible that a user have no chance to intervene and correct a suggested username. It risks exposing email addresses.
Previosuly, quotes from original topics are rendered incorrectly since the moved posts are not rebaked.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FIX: Remove List-Post email header
This header is used for mailing lists and can confuse some email clients
such as Thunderbird to display wrong replying options.
* FIX: Replace reply_key in email custom headers
Admins can add custom email headers from site settings. Email sender
will try to replace the reply key if %{reply_key} exists or remove the
header if a reply key does not exist.
Calling create_notification_alert could still send a notification to a
suspended user. This just moves the check if user is suspended right
before sending the notification.
Invite is used in two contexts, when inviting a new user to the forum
and when inviting an existent user to a topic. The first case is more
complex and it involves permission checks to ensure that new users can
be created. In the second case, it is enough to ensure that the topic
is visible for both users and that all preconditions are met.
One edge case is the invite to topic via email functionality which
checks for both conditions because first the user must be invited to
create an account first and then to the topic.
A side effect of these changes is that all site settings related to
invites refer to inviting new users only now.
We aren't translating these settings, so it makes more sense to move them into the code. I added an instance method so plugins can add mappings for custom reasons.
- Allow the `/presence/get` endpoint to return multiple channels in a single request (limited to 50)
- When multiple presence channels are initialized in a single Ember runloop, batch them into a single GET request
- Introduce the `presence-pretender` to allow easy testing of PresenceChannel-related features
- Introduce a `use_cache` boolean (default true) on the the server-side PresenceChannel initializer. Useful during testing.
Change the type for default_calendar to a string.
The type specified for the default calendar in the api docs wasn't a
valid type. The linting in the api docs repo reports:
```
`type` can be one of the following only: "object", "array", "string", "number", "integer", "boolean", "null".
```
This linting currently is only in the `discourse_api_docs` repo.
* DEV: Add include_subcategories param to api docs
Adding the `include_subcategories=true` query param to the
`/categories.json` api docs.
Follow up to: fe676f334a
* fix spec
This commit fixes the `eval` and `evalsha` commands/methods and any other methods that don't have a wrapper in `DiscourseRedis` and expect keyword arguments. I noticed this problem in Logster when I was trying to fetch some log messages in JSON format using the rails console and saw the messages were missing the `env` field. Logster uses the `eval` command to fetch messages `env`s:
dc351fd00f/lib/logster/redis_store.rb (L250-L253)
and that code was not fetching anything because `DiscourseRedis` didn't pass the `keys` keyword arg to the redis gem.
It allows saving local date to calendar.
Modal is giving option to pick between ics and google. User choice can be remembered as a default for the next actions.
* FEATURE: Return subcategories on categories endpoint
When using the API subcategories will now be returned nested inside of
each category response under the `subcategory_list` param. We already
return all the subcategory ids under the `subcategory_ids` param, but
you then would have to make multiple separate API calls to fetch each of
those subcategories. This way you can get **ALL** of the categories
along with their subcategories in a single API response.
The UI will not be affected by this change because you need to pass in
the `include_subcategories=true` param in order for subcategories to be
returned.
In a follow up PR I'll add the API scoping for fetching categories so
that a readonly API key can be used for the `/categories.json` endpoint. This
endpoint should be used instead of the `/site.json` endpoint for
fetching a sites categories and subcategories.
* Update PR based on feedback
- Have spec check for specific subcategory
- Move comparison check out of loop
- Only populate subcategory list if option present
- Remove empty array initialization
- Update api spec to allow null response
* More PR updates based on feedback
- Use a category serializer for the subcategory_list
- Don't include the subcategory_list param if empty
- For the spec check for the subcategory by id
- Fix spec to account for param not present when empty
Usually, when an email is received a user lookup is performed using the
email address found in the `From` header. When an email has an
`X-Original-From` header, if it is equal to `Reply-To` then it uses that
one instead. The comparison was sensitive to whitespaces and other
insignificant characters such as quotes because it reconstructed the
`From` header.
For the fixture added in this commit, it compared the reconstructed
`From` header `John Doe <johndoe@example.com>` with the `Reply-To`
header `"John Doe" <johndoe@example.com>`.
We relied on backticks to identify and replace site setting names with links. Unfortunately, some translations don't follow this convention, breaking this feature.
Additionally, this lets us linkify `category settings` and `watched words` without using HTML in the translations.
You may notice that I split the texts we want to linkify into two groups. I did this on purpose to emphasize those that should be translated (regular_links) from those who don't (site_settings_link). If you can think of a better solution, I'm open to suggestions.
* DEV: Remove HTML setting type and sanitization logic.
We concluded that we don't want settings to contain HTML, so I'm removing the setting type and sanitization logic. Additionally, we no longer allow the global-notice text to contain HTML.
I searched for usages of this setting type in the `all-the-plugins` repo and found none, so I haven't added a migration for existing settings.
* Mark Global notices containing links as HTML Safe.
FinalDestination now supports the `follow_canonical` option, which will perform an initial GET request, parse the canonical link if present, and perform a HEAD request to it.
We use this mode during embeds to avoid treating URLs with different query parameters as different topics.
Previously, while retrieving each upload urls in a post S3 CDN urls with different path in prefix (external urls technically) are considered as uploaded url. It created issue while checking missing uploads.
This commit resolves refactors can_invite_to? to use
can_invite_to_forum? for checking the site-wide permissions and then
perform topic specific checkups.
Similarly, can_invite_to? is always used with a topic object and this is
now enforced.
There was another problem before when `must_approve_users` site setting
was not checked when inviting users to forum, but was checked when
inviting to a topic.
Another minor security issue was that group owners could invite to
group topics even if they did not have the minimum trust level to do
it.
It was possible to see notifications of other users using routes:
- notifications/responses
- notifications/likes-received
- notifications/mentions
- notifications/edits
We weren't showing anything private (like notifications about private messages), only things that're publicly available in other places. But anyway, it feels strange that it's possible to look at notifications of someone else. Additionally, there is a risk that we can unintentionally leak something on these pages in the future.
This commit restricts these routes.
The all inboxes was introduced in
016efeadf6 but we decided to roll it back
for performance reasons. The main performance challenge here is that PG
has to basically loop through all the PMs that a user is allowed to view
before being able to order by `Topic#bumped_at`. The all inboxes was not
planned as part of the new/unread filter so we've decided not to tackle
the performance issue for the upcoming release.
Follow-up to 016efeadf6
* PERF: Improve database query perf when loading topics for a category.
Instead of left joining the `topics` table against `categories` by filtering with `categories.id`,
we can improve the query plan by filtering against `topics.category_id`
first before joining which helps to reduce the number of rows in the
topics table that has to be joined against the other tables and also
make better use of our existing index.
The following is a before and after of the query plan for a category
with many subcategories.
Before:
```
QUERY PLAN
-------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Limit (cost=1.28..747.09 rows=30 width=12) (actual time=85.502..2453.727 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..566518.36 rows=22788 width=12) (actual time=85.501..2453.722 rows=30 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=1.00..566001.58 rows=22866 width=20) (actual time=85.494..2453.702 rows=30 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((t
opics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Nested Loop (cost=0.57..528561.75 rows=68606 width=24) (actual time=85.472..2453.562 rows=31 loops=1)
Join Filter: ((topics.category_id = categories.id) AND ((categories.topic_id <> topics.id) OR (categories.id = 1
1)))
Rows Removed by Join Filter: 13938306
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..100480.05 rows=715549 width=24) (actual ti
me=0.010..633.015 rows=464623 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text))
Rows Removed by Filter: 105321
-> Materialize (cost=0.14..36.04 rows=30 width=8) (actual time=0.000..0.002 rows=30 loops=464623)
-> Index Scan using categories_pkey on categories (cost=0.14..35.89 rows=30 width=8) (actual time=0.006.
.0.040 rows=30 loops=1)
Index Cond: (id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,1
13,104,98,100,96,108,109,110,111}'::integer[]))
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..0.53 rows=1 width=16) (a
ctual time=0.004..0.004 rows=0 loops=31)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=30)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width
=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
Planning Time: 1.359 ms
Execution Time: 2453.765 ms
(23 rows)
```
After:
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Limit (cost=1.28..438.55 rows=30 width=12) (actual time=38.297..657.215 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..195944.68 rows=13443 width=12) (actual time=38.296..657.211 rows=30 loops=1)
Filter: ((categories.topic_id <> topics.id) OR (topics.category_id = 11))
Rows Removed by Filter: 29
-> Nested Loop Left Join (cost=1.13..193462.59 rows=13443 width=16) (actual time=38.289..657.092 rows=59 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=0.85..193156.79 rows=13489 width=20) (actual time=38.282..657.059 rows=59 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((topics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..134521.06 rows=40470 width=24) (actual time=38.267..656.850 rows=60 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text) AND (category_id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,113,104,98,100,96,108,109,110,111}'::integer[])))
Rows Removed by Filter: 569895
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..1.43 rows=1 width=16) (actual time=0.003..0.003 rows=0 loops=60)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=59)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
-> Index Scan using categories_pkey on categories (cost=0.14..0.17 rows=1 width=8) (actual time=0.001..0.001 rows=1 loops=59)
Index Cond: (id = topics.category_id)
Planning Time: 1.633 ms
Execution Time: 657.255 ms
(22 rows)
```
* PERF: Optimize index on topics bumped_at.
Replace `index_topics_on_bumped_at` index with a partial index on `Topic#bumped_at` filtered by archetype since there is already another index that covers private topics.
In the user bookmark list, when we show the excerpt of the bookmark
(which is usually just the bookmarked post excerpt), we want to show
the first unread post's excerpt instead for for_topic bookmarks. This
is because when the user clicks on that bookmark link, they are taken
to the first unread post in the topic, not the OP, as per:
27699648ef
The file size error messages for max_image_size_kb and
max_attachment_size_kb are shown to the user in the KB
format, regardless of how large the limit is. Since we
are going to support uploading much larger files soon,
this KB-based limit soon becomes unfriendly to the end
user.
For example, if the max attachment size is set to 512000
KB, this is what the user sees:
> Sorry, the file you are trying to upload is too big (maximum
size is 512000KB)
This makes the user do math. In almost all file explorers that
a regular user would be familiar width, the file size is shown
in a format based on the maximum increment (e.g. KB, MB, GB).
This commit changes the behaviour to output a humanized file size
instead of the raw KB. For the above example, it would now say:
> Sorry, the file you are trying to upload is too big (maximum
size is 512 MB)
This humanization also handles decimals, e.g. 1536KB = 1.5 MB
Instead of going to the OP of the topic for topic-level bookmarks
(which are bookmarks where for_topic is true) when clicking on the
bookmark in the quick access menu or on the user bookmark list,
this commit takes the user to the last unread post in
the topic instead. This should be generally more useful than landing
on the unchanging OP.
To make this work nicely, I needed to add the last_read_post_number to
the BookmarkQuery based on the TopicUser association. It should not add
too much extra weight to the query, because it is limited to the user
that we are fetching bookmarks for.
Also fixed an issue where the bookmark serializer highest_post_number was
not taking into account whether the user was staff, which is when we
should use highest_staff_post_number instead.
* DEV: use active record `save!` instead of mini sql.
The "save" method will trigger the before_save callback "match_primary_group_changes" for User model. Else `flair_group_id` won't be removed from the user.
* check whether the method `match_primary_group_changes` called or not.
Allows creating a bookmark with the `for_topic` flag introduced in d1d2298a4c set to true. This happens when clicking on the Bookmark button in the topic footer when no other posts are bookmarked. In a later PR, when clicking on these topic-level bookmarks the user will be taken to the last unread post in the topic, not the OP. Only the OP can have a topic level bookmark, and users can also make a post-level bookmark on the OP of the topic.
I had to do some pretty heavy refactors because most of the bookmark code in the JS topics controller was centred around instances of Post JS models, but the topic level bookmark is not centred around a post. Some refactors were just for readability as well.
Also removes some missed reminderType code from the purge in 41e19adb0d
Due to the way that rswag expands shared components we were getting this
warning when linting our api docs:
```
Component: "user_response" is never used.
```
This change refactors the `api/users_spec.rb` file so that it uses the
new way of doing things with a separate `user_get_response.json` schema
file rather then the old way of loading a shared response inside of the
swagger_helper.rb file.
The display name can have quotes around it, which does not work
with our current comparison of a from field (in this case Reply-To)
and another header (X-Original-From), because we are not comparing
the two values in the same way. This causes an issue where the
commit here: b88d8c8 will not
work properly; the forwarded email gets the From address instead
of the Reply-To address as intended.
After deleting a category, we should soft-delete the category definition topic instead of hard deleting it. Else it causes issues while doing the user merge action if the source user has an orphan post that belongs to the deleted topic.
The color_scheme_id needs to be an integer not a string.
This is one of the failing tests that showed this error:
https://github.com/discourse/discourse/runs/3598414971
It showed this error
`POSSIBLE ISSUE W/: /user_themes/0/color_scheme_id`
And this is part of the site.json response:
```
...
"user_themes"=>[{"theme_id"=>149, "name"=>"Cool theme 111", "default"=>false, "color_scheme_id"=>37}]
...
```
We don't actually use the reminder_type for bookmarks anywhere;
we are just storing it. It has no bearing on the UI. It used
to be relevant with the at_desktop bookmark reminders (see
fa572d3a7a)
This commit marks the column as readonly, ignores it, and removes
the index, and it will be dropped in a later PR. Some plugins
are relying on reminder_type partially so some stubs have been
left in place to avoid errors.
First reported in https://meta.discourse.org/t/-/202482/19
There are two optimizations being applied here:
1. Fetch a user's group ids in a seperate query instead of including it
as a sub-query. When I tried a subquery, the query plan becomes very
inefficient.
1. Join against the `topic_allowed_users` and `topic_allowed_groups`
table instead of doing an IN against a subquery where we UNION the
`topic_id`s from the two tables. From my profiling, this enables PG to
do a backwards index scan on the `index_topics_on_timestamps_private`
index.
This commit fixes a bug where listing all messages was incorrectly
excluding topics if a topic has been archived by a group even if the
user did not belong to the group.
This commit also fixes another bug where dismissing private messages
selectively was subjected to the default limit of 30.
This new column will be used to indicate that a bookmark
is at the topic level. The first post of a topic can be
bookmarked twice after this change -- with for_topic set
to true and with for_topic set to false.
A later PR will use this column for logic to bookmark the
topic, and then topic-level bookmark links will take you
to the last unread post in the topic.
See also 22208836c5
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
Discourse is sending regularly message to admins when potential problems are persisted. Most of the time they have exactly the same content. In that case, when there are no replies, the old one should be trashed before a new one is created.
Administrators can use second factor to confirm granting admin access
without using email. The old method of confirmation via email is still
used as a fallback when second factor is unavailable.
The previous excerpt was a simple truncated raw message. Starting with
this commit, the raw content of the draft is cooked and an excerpt is
extracted from it. The logic for extracting the excerpt mimics the the
`ExcerptParser` class, but does not implement all functionality, being
a much simpler implementation.
The two draft controllers have been merged into one and the /draft.json
route has been changed to /drafts.json to be consistent with the other
route names.
When copying an existing upload stub temporary object
on S3 to its final destination we were not copying across
its additional headers such as content-disposition and
cache-control, which led to issues like attachments not
downloading with their original filename when clicking
the download links in posts.
This is because the metadata_directive = REPLACE option
was not being passed to object.copy_from(), so only the
source object's headers were being used. Added an option
for apply_metadata_to_destination to apply this option
conditionally, because we may not always want to replace
this metadata, but we definitely do when copying a temporary
upload.
When a user archives a personal message, they are redirected back to the
inbox and will refresh the list of the topics for the given filter.
Publishing an event to the user results in an incorrect incoming message
because the list of topics has already been refreshed.
This does mean that if a user has two tabs opened, the non-active tab
will not receive the incoming message but at this point we do not think
the technical trade-offs are worth it to support this feature. We
basically have to somehow exclude a client from an incoming message
which is not easy to do.
Follow-up to fc1fd1b416
Watched words of type 'replace' or 'link' replaced the text inside
mentions or hashtags too, which broke these. These types of watched
words must skip any match that has an @ or # before it.
At this point in time, we do not think supporting unread and new when an
admin is looking at another user's messages is worth supporting.
Follow-up to fc1fd1b416
One of the fields that should be present for openapi docs is the "license"
field.
https://spec.openapis.org/oas/latest.html#infoObject
Our API docs already had a license, so this commit just specifies that
and provides a link to it.
In order to include the new/unread count in the browse more message
under suggested topics, a couple of technical changes have to be made.
1. `PrivateMessageTopicTrackingState` is now auto-injected which is
similar to how it is done for `TopicTrackingState`. This is done so
we don't have to attempt to pass the `PrivateMessageTopicTrackingState`
object multiple levels down into the suggested-topics component. While
the object is auto-injected, we only fetch the initial state and start
tracking when the relevant private messages routes has been hit and only
when a private message's suggested topics is loaded. This is
done as we do not want to add the extra overhead of fetching the inital
state to all page loads but instead wait till the private messages
routes are hit.
2. Previously, we would stop tracking once the `user-private-messages`
route has been deactivated. However, that is not ideal since
navigating out of the route and back means we send an API call to the
server each time. Since `PrivateMessageTopicTrackingState` is kept in
sync cheaply via messageBus, we can just continue to track the state
even if the user has navigated away from the relevant stages.
When forwarding emails into the group inbox, we now use the
original sender email as the from_address since
2ac9fd9dff. However, we have not
been saving the original CC addresses of the forwarded email,
which are needed to include those recipients in on the conversation
when replying via the group inbox.
This commit captures the CC addresses on the incoming email, and
makes sure the emails are created as staged users and added to the
list of topic allowed users so they are included on CC's sent by
the GroupSmtpEmail and other jobs.
When 2ac9fd9dff was done, this
affected the small post that is created when forwarding an email
into the group inbox. Instead of using the name and the email of
the user who forwarded the email, it used the original from email
and name to create the small post. So instead of something like
"Discourse Team forwarded the above email" we ended up with
"John Smith forwarded the above email" which is incorrect.
This fixes the issue by creating a staged user for the forwarding
email address (if such a user does not yet exist) and uses that
for the "forwarded" small post instead.
Other locale characters in file names (e.g. é, ä) as well
as special characters can cause issues on S3, notably the S3
copy object operation does not support these special characters.
Instead of storing the original file name in the key, which is
unnecessary, we now generate a random file name with the original
extension for the temporary file and use that for all external
upload stub operations.
From the openapi spec:
https://spec.openapis.org/oas/latest.html#fixed-fields-7
each endpoint needs to have an `operationId`:
> Unique string used to identify the operation. The id MUST be unique
> among all operations described in the API. The operationId value is
> case-sensitive. Tools and libraries MAY use the operationId to uniquely
> identify an operation, therefore, it is RECOMMENDED to follow common
> programming naming conventions.
Running the linter on our openapi.json file with this command:
`npx @redocly/openapi-cli lint openapi.json`
produced the following warning on all of our endpoints:
> Operation object should contain `operationId` field
This commit resolves these warnings by adding an operationId field to
each endpoint.
DEV: Allow passing cook_method to TopicEmbed.import to override default
This will be used in the rss-polling plugin when we want to have
oneboxes on feed content, like youtube for example.
Previously, a group's `default_notification_level` change will only affect the users added after it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The seed-fu gem resets the sequence on all the tables it touches. In some situations, this can cause primary keys to be re-used. This commit introduces a freedom patch which ensures seed-fu only touches the sequence when it is less than the id of one of the seeded records.
PresenceChannel aims to be a generic system for allow the server, and end-users, to track the number and identity of users performing a specific task on the site. For example, it might be used to track who is currently 'replying' to a specific topic, editing a specific wiki post, etc.
A few key pieces of information about the system:
- PresenceChannels are identified by a name of the format `/prefix/blah`, where `prefix` has been configured by some core/plugin implementation, and `blah` can be any string the implementation wants to use.
- Presence is a boolean thing - each user is either present, or not present. If a user has multiple clients 'present' in a channel, they will be deduplicated so that the user is only counted once
- Developers can configure the existence and configuration of channels 'just in time' using a callback. The result of this is cached for 2 minutes.
- Configuration of a channel can specify permissions in a similar way to MessageBus (public boolean, a list of allowed_user_ids, and a list of allowed_group_ids). A channel can also be placed in 'count_only' mode, where the identity of present users is not revealed to end-users.
- The backend implementation uses redis lua scripts, and is designed to scale well. In the future, hard limits may be introduced on the maximum number of users that can be present in a channel.
- Clients can enter/leave at will. If a client has not marked itself 'present' in the last 60 seconds, they will automatically 'leave' the channel. The JS implementation takes care of this regular check-in.
- On the client-side, PresenceChannel instances can be fetched from the `presence` ember service. Each PresenceChannel can be used entered/left/subscribed/unsubscribed, and the service will automatically deduplicate information before interacting with the server.
- When a client joins a PresenceChannel, the JS implementation will automatically make a GET request for the current channel state. To avoid this, the channel state can be serialized into one of your existing endpoints, and then passed to the `subscribe` method on the channel.
- The PresenceChannel JS object is an ember object. The `users` and `count` property can be used directly in ember templates, and in computed properties.
- It is important to make sure that you `unsubscribe()` and `leave()` any PresenceChannel objects after use
An example implementation may look something like this. On the server:
```ruby
register_presence_channel_prefix("site") do |channel|
next nil unless channel == "/site/online"
PresenceChannel::Config.new(public: true)
end
```
And on the client, a component could be implemented like this:
```javascript
import Component from "@ember/component";
import { inject as service } from "@ember/service";
export default Component.extend({
presence: service(),
init() {
this._super(...arguments);
this.set("presenceChannel", this.presence.getChannel("/site/online"));
},
didInsertElement() {
this.presenceChannel.enter();
this.presenceChannel.subscribe();
},
willDestroyElement() {
this.presenceChannel.leave();
this.presenceChannel.unsubscribe();
},
});
```
With this template:
```handlebars
Online: {{presenceChannel.count}}
<ul>
{{#each presenceChannel.users as |user|}}
<li>{{avatar user imageSize="tiny"}} {{user.username}}</li>
{{/each}}
</ul>
```
The generate_presigned_put endpoint for direct external uploads
(such as the one for the uppy-image-uploader) records allowed
S3 metadata values on the uploaded object. We use this to store
the sha1-checksum generated by the UppyChecksum plugin, for later
comparison in ExternalUploadManager.
However, we were not doing this for the create_multipart endpoint,
so the checksum was never captured and compared correctly.
Also includes a fix to make sure UppyChecksum is the last preprocessor to run.
It is important that the UppyChecksum preprocessor is the last one to
be added; the preprocessors are run in order and since other preprocessors
may modify the file (e.g. the UppyMediaOptimization one), we need to
checksum once we are sure the file data has "settled".
Users can invite people to topic and they will be automatically
redirected to the topic when logging in after signing up. This commit
ensures a "invited_to_topic" notification is created when the invite is
redeemed.
The same notification is used for the "Notify" sharing method that is
found in share topic modal.
This bug was introduced by f66007ec83.
In PostJobsEnqueuer we previously did not fire the after_post_create
event and after_topic_create event for private message topics. This was
changed in the above commit in order to publish message bus messages
for topic tracking state updates. Unfortunately this caused the
NotifyMailingListSubscribers job to be enqueued for all posts including
private messages, and admins and the users involved in the PMs got
emailed the contents of the PMs if they had mailing list mode enabled.
Luckily the impact of this was mitigated by a Guardian#can_see? check
for each mailing list mode user in the NotifyMailingListSubscribers job.
We never want to notify mailing list mode subscribers for private messages
so an early return has been added there, plus the logic in PostJobsEnqueuer
has been fixed, and tests have been added to that class where there were
none before.
Since ad3ec5809f when a user chooses
the Dismiss New... option in the New topic list, we send a request
to topics/reset-new.json with ?tracked=false as the only parameter.
This then uses Topic as the scope for topics to dismiss, with no
other limitations. When we do topic_scope.pluck(:id), it gets the
ID of every single topic in the database (that is not deleted) to
pass to TopicsBulkAction, causing a huge query with severe performance
issues.
This commit changes the default scope to use
`TopicQuery.new(current_user).new_results(limit: false)`
which should only use the topics in the user's New list, which
will be a much smaller list, depending on the user's "new_topic_duration_minutes"
setting.
This is unnecessary, as when the temporary key is created
in S3Store we already include the s3_bucket_folder_path, and
the key will always start with temp/ to assist with lifecycle
rules for multipart uploads.
This was affecting Discourse.store.object_from_path,
Discourse.store.signed_url_for_path, and possibly others.
See also: e0102a5
There are certain design decisions that were made in this commit.
Private messages implements its own version of topic tracking state because there are significant differences between regular and private_message topics. Regular topics have to track categories and tags while private messages do not. It is much easier to design the new topic tracking state if we maintain two different classes, instead of trying to mash this two worlds together.
One MessageBus channel per user and one MessageBus channel per group. This allows each user and each group to have their own channel backlog instead of having one global channel which requires the client to filter away unrelated messages.
Previously we had temp/ in the middle of the S3 key path like so
* /uploads/default/temp/randomstring/test.png (normal site)
* /sitename/uploads/default/temp/randomstring/test.png (s3 folder path site)
* /standard10/uploads/sitename/temp/randomstring/test.png (multisite site)
However this necessitates making a lifecycle rule to clean up incomplete
S3 multipart uploads for every site, something which we cannot do. It makes
much more sense to have a structure with /temp at the start of the key,
which is what this commit does:
* /temp/uploads/default/randomstring/test.png (normal site)
* /temp/sitename/uploads/default/randomstring/test.png (s3 folder path site)
* /temp/standard10/uploads/sitename/randomstring/test.png (multisite site)
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
When emails were forwarded to a group inbox by the email address
of the group, for example when an email ends up in spam and must
be manually forwarded to the group+site@discoursemail.com address,
the OP of the topic ended up being the group's email address instead
of the sender who originally sent the email to the group inbox.
This commit detects that an email has been forwarded using existing
tools, and if the from address matches one of the group incoming
email addresses, then we look at the forwarded email's from address
and use that instead for the incoming email from address as well as
the staged/regular user used for the Topic.user.
This will make it much cleaner to forward emails into a group inbox,
and will prevent issues with PostAlerter where the OP is double-notified
for these emails.
Currently, pinned topics are ordered by the `bumped_at` column. This behavior is not desired because it gives admins no control over the order of pinned topics. This PR makes pinned topics ordered by the `pinned_at` column. A topic that is pinned last appears first in topic lists. If an admin wants an already pinned topic to appear first in the list of pinned topics, they'll have to unpin that topic and pin it again.
Meta topic: https://meta.discourse.org/t/how-do-i-set-the-order-of-pinned-topics/16935/23?u=osama.
* FIX: Revoking admin or moderator status doesn't require refresh to delete/anonymize/merge user
On the /admin/users/<id>/<username> page, there are action buttons that are either visible or hidden depending on a few fields from the AdminDetailsSerializer: `can_be_deleted`, `can_be_anonymized`, `can_be_merged`, `can_delete_all_posts`.
These fields are updated when granting/revoking admin or moderator status. However, those updates were not being reflected on the page. E.g. if a user is granted moderation privileges, the 'anonymize user' and 'merge' buttons still appear on the page, which is inconsistent with the backend state of the user. It requires refreshing the page to update the state.
This commit fixes that issue, by syncing the client model state with the server state when handling a successful response from the server. Now, when revoking privileges, the buttons automatically appear without refreshing the page. Similarly, when granting moderator privileges, the buttons automatically disappear without refreshing the page.
* Add detailed user response to spec for changed routes.
Add tests to verify that the revoke_moderation, grant_moderation, and revoke_admin routes return a response formatted according to the AdminDetailedUserSerializer.
Emails can include the marker in a different language, depending on
site and user settings. The email receiver always looked for the marker
in default language.
This is useful in the DiscourseHub mobile app, currently the app queries
the `about.json` endpoint, which can raise a CORS issue in some cases,
for example when the site only accepts logins from an external provider.
Allow admins to configure exceptions to our Rails rate limiter.
Configuration happens in the environment variables, and work with both
IPs and CIDR blocks.
Example:
```
env:
DISCOURSE_MAX_REQS_PER_IP_EXCEPTIONS: >-
14.15.16.32/27
216.148.1.2
```
`nullable` is no longer a valid type, and types also can't be an empty
string, so just bringing a number of issues with types in compliance
with the openapi spec.
When a staff member clicks on a user's number of flagged posts, we redirect them to the review queue, so it makes sense to count the number of items there to calculate the count.
We used to look at post action items to calculate this number, which doesn't match the number of items in the queue if old flags exist.
