What is this change required?
I noticed that actions in `SidebarSectionsController` resulted in
lots of N+1 queries problem and I wanted a solution to
prevent such problems without having to write N+1 queries tests. I have
also used strict loading for `SidebarSection` queries in performance
sensitive spots.
Note that in this commit, I have also set `config.active_record.action_on_strict_loading_violation = :log`
for the production environment so that we have more visibility of
potential N+1 queries problem in the logs. In development and test
environment, we're sticking with the default of raising an error.
When uploading images via direct to S3 upload, we were
assuming that we could not pre-emptively check the file
size because the client may do preprocessing to reduce
the size, and UploadCreator could also further reduce the
size.
This, however, is not true of gifs, so we would have an
issue where you upload a gif > the max_image_size_kb
setting and had to wait until the upload completed for
this error to show.
Now, instead, when we direct upload gifs to S3, we check
the size straight away and present a file size error to
the user rather than making them wait. This will increase
meme efficiency by approximately 1000%.
What is the problem?
In `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search`, the controller actions
was using the `RailsMultisite::ConnectionManagement.with_hostname` API
but `params[:hostname]` was always `nil` because the routes does not
have a `:hostname` param component and the client does not ever pass the
`:hostname` param when making the request. When `RailsMultisite::ConnectionManagement.with_hostname` is
used with a `nil` argument, it ends up connecting to the default
multisite database. Usually this would be bad because we're allowing a
site in a multisite setup to connect to another site but thankfully no
private data is being leaked here.
What is the fix?
Since `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search` are login required route,
there is no need for us to switch database connections. The fix here is
to simply remove the use of `RailsMultisite::ConnectionManagement.with_hostname`.
### What is the problem?
It is possible to pass an arbitrary value to the limit parameter in `TagsController#search`, and have it flow through `DiscourseTagging.filter_allowed_tags` where it will raise an error deep in the database driver. MiniSql ensures there's no injection happening, but that ultimately results in an invalid query.
### How does this fix it?
This change checks more strictly that the parameter can be cleanly converted to an integer by replacing the loose `#to_i` conversion semantics with the stronger `Kernel#Integer` ones.
**Example:**
```ruby
"1; SELECT 1".to_i
#=> 1
Integer("1; SELECT 1")
#=> ArgumentError
```
As part of the change, I also went ahead to disallow a limit of "0", as that doesn't seem to be a useful option. Previously only negative limits were disallowed.
* DEV: move sidebar community section to database
Before, community section was hard-coded. In the future, we are planning to allow admins to edit it. Therefore, it has to be moved to database to `custom_sections` table.
Few steps and simplifications has to be made:
- custom section was hidden behind `enable_custom_sidebar_sections` feature flag. It has to be deleted so all forums, see community section;
- migration to add `section_type` column to sidebar section to show it is a special type;
- migration to add `segment` column to sidebar links to determine if link should be displayed in primary section or in more section;
- simplify more section to have one level only (secondary section links are merged);
- ensure that links like `everything` are correctly tracking state;
- make user an anonymous links position consistence. For example, from now on `faq` link for user and anonymous is visible in more tab;
- delete old community-section template.
We are seeing issues with the composer not being able to close due to the addition of a error message when rescuing from `Draft::OutOfSequence`. This PR will revert to the original solution implemented prior to https://github.com/discourse/discourse/pull/21148 that just silently rescues from `Draft::OutOfSequence`
This PR adds the ability to destroy reviewables for a passed user via the API. This was not possible before as this action was reserved for reviewables for you created only.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a reviewable for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal reviewable and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the reviewable.
This PR adds the ability to destroy drafts for a passed user via the API. This was not possible before as this action was reserved for only your personal drafts.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a draft for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal draft and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the draft.
* FEATURE: add a setting to allowlist DiscourseConnect return path domains
This commit adds a site setting to allowlist DiscourseConnect return
path domains. The setting needs supports exact domain or wildcard
character (*) to allow for any domain as return path.
* Add more specs to clarify what is allowed in site setting
* Update setting description to explain what is allowed
Previously, public custom sections were only visible to logged-in users. In this PR, we are making them visible to anonymous as well.
The reason is that Community Section will be moved into custom section model to be easily editable by admins.
The following are the changes being introduced in this commit:
1. Instead of mapping the query language to various query params on the
client side, we've decided that the benefits of having a more robust
query language far outweighs the benefits of having a more human readable query params in the URL.
As such, the `/filter` route will just accept a single `q` query param
and the query string will be parsed on the server side.
1. On the `/filter` route, the tags filtering query language is now
supported in the input per the example provided below:
```
tags:bug+feature tagged both bug and feature
tags:bug,feature tagged either bug or feature
-tags:bug+feature excluding topics tagged bug and feature
-tags:bug,feature excluding topics tagged bug or feature
```
The `tags` filter can also be specified multiple
times in the query string like so `tags:bug tags:feature` which will
filter topics that contain both the `bug` tag and `feature` tag. More
complex query like `tags:bug+feature -tags:experimental` will also work.
This corrects two issues:
1. We were double serializing topic tracking state (as_json calls were not cached)
2. We were inefficiently serializing items by instantiating extra objects
Why is this change required?
Prior to this change, we would list all group messages that a user
has access to in the user menu messages notifications panel dropdown.
However, this did not respect the topic's notification level setting and
group messages which the user has set to 'normal' notification level were
being displayed
What does this commit do?
With this commit, we no longer display all group messages that a user
has access to. Instead, we only display group messages that a user is
watching in the user menu messages notifications panel dropdown.
Internal Ref: /t/94392
Currently the auto-bump cooldown is hard-coded to 24 hours.
This change makes the highlighted 24 hours part configurable (defaulting to 24 hours), and the rest of the process remains the same.
This uses the new CategorySetting model associated with Category. We decided to add this because we want to move away from custom fields due to the lack of type casting and validations, but we want to keep the loading of these optional as they are not needed for almost all of the flows.
Category settings will be back-filled to all categories as part of this change, and creating a new category will now also create a category setting.
This commit implements many changes to topic and comments embedding. It
deprecates the class_name field from EmbeddableHost and suggests using
the className parameter. discourse_username parameter has been
deprecated and it will fetch it from embedded site from the author or
discourse-username meta.
See the updated code sample from Admin > Customize > Embedding page.
* FEATURE: Add className parameter for Discourse embed
* DEV: Hide class_name from EmbeddableHost
* DEV: Deprecate class_name field of EmbeddableHost
* FEATURE: Use either author or discourse-username meta tag
* DEV: Deprecate discourse_username parameter
* DEV: Improve embed code sample
What does this change do?
This commit the client to override the navigation menu setting
configured by the site temporarily based on the value of the
`navigation_menu` query param. The new query param replaces the old
`enable_sidebar` query param.
Why do we need this change?
The motivation here is to allow theme maintainers to quickly preview
what the site will look like with the various navigation menu site
setting.
Previously, a user avatar redirect had a lifetime of 24h. That means that a change to the S3 CDN URL would take up to 24h to propagate to clients and intermediate CDNs.
This commit reduces the max age to 1 hour, but also introduces a `stale-while-revalidate` directive. This allows clients and CDNs to use a 'stale' value if it was received between 1h and 24h ago, as long as they make a background request to update the cache. This should reduce the impact of S3 URL changes. 1 hour after the change, the CDN will start serving updated values. Plus, if users have cached bad responses, their browser will automatically fetch the correct version and use it on the next page load.
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
When a post is created using the API and goes into the review queue, we
would return a 'null' string in the response which isn't valid JSON.
Internal ref: /t/92419
Co-authored-by: Leonardo Mosquera <ldmosquera@gmail.com>
Improvements for this PR: https://github.com/discourse/discourse/pull/20057
What was fixed:
- [x] Use ember transitions instead of full reload
- [x] Link was inaccurately kept active
- [x] "+ save" renamed to just "save"
- [x] Render emojis in link name
- [x] UI to set icon
- [x] Delete link is trash icon instead of "x"
- [x] Add another link to on the left and rewording
- [x] Raname "link name" -> "name", "points to" -> link
- [x] Add limits to fields
- [x] Move add section button to the bottom
Allows users to configure their own custom sidebar sections with links withing Discourse instance. Links can be passed as relative path, for example "/tags" or full URL.
Only path is saved in DB, so when Discourse domain is changed, links will be still valid.
Feature is hidden behind SiteSetting.enable_custom_sidebar_sections. This hidden setting determines the group which members have access to this new feature.
1. What is the problem here?
When a user's reviewables count changes, the changes are published via
MessageBus in a background Sidekiq job which means there is a delay before the
client receives the MessageBus message with the updated count. During
the time the reviewables count for a user has been updated and the time
when the client receives the MessageBus message with the updated count,
a user may view the reviewables list in the user menu. When that happens, the number of
reviewables in the list may be out of sync with the count shown.
2. What is the fix?
Going forward, the response for the `ReviewablesController#user_menu_list` action will include the user's reviewables count as
the `reviewables_count` attribute. This is then used by the client side
to update the user's reviewables count to ensure that the reviewables
list and count are kept in sync.
## Why do we need this change?
When loading the ember app, [MessageBus does not start polling immediately](f31f0b70f8/app/assets/javascripts/discourse/app/initializers/message-bus.js (L71-L81)) and instead waits for `document.readyState` to be `complete`. What this means is that if there are new messages being created while we have yet to start polling, those messages will not be received by the client.
With sidebar being the default navigation menu, the counts derived from `topic-tracking-state.js` on the client side is prominently displayed on every page. Therefore, we want to ensure that we are not dropping any messages on the channels that `topic-tracking-state.js` subscribes to.
## What does this change do?
This includes the `MessageBus.last_id`s for the MessageBus channels which `topic-tracking-state.js` subscribes to as part of the preloaded data when loading a page. The last ids are then used when we subscribe the MessageBus channels so that messages which are published before MessageBus starts polling will not be missed.
## Review Notes
1. See https://github.com/discourse/message_bus#client-support for documentation about subscribing from a given message id.
Currently `Topic#pm_topic_count` is a count of all personal messages tagged for a given tag. As a result, any user with access to PM tags can poll a sensitive tag to determine if a new personal message has been created using that tag even if the user does not have access to the personal message. We classify this as a minor leak in sensitive information.
With this commit, `Topic#pm_topic_count` is hidden from users by default unless the `display_personal_messages_tag_counts` site setting is enabled.
A while back the definition of TL was changed but many
areas in the codebase still use the term 'Regular user'
despite it having some implicit meaning (TL2).
See 20140905055251_rename_trust_level_badges.rb
When the `tags_listed_by_group` site setting is disable, we were seeing
the N+1 queries problem when multiple `CategoryTag` records are listed.
This commit fixes that by ensuring that we are not filtering through the
category `tags` association after the association has been eager loaded.
* FIX: Ensure soft-deleted topics can be deleted
The topic was not found during the deletion process because it was
deleted and `@post.topic` was nil.
* DEV: Use @topic instead of finding the topic every time
This commit allows us to set the channel slug when creating new chat
channels. As well as this, it introduces a new `SlugsController` which can
generate a slug using `Slug.for` and a name string for input. We call this
after the user finishes typing the channel name (debounced) and fill in
the autogenerated slug in the background, and update the slug input
placeholder.
This autogenerated slug is used by default, but if the user writes anything
else in the input it will be used instead.
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
Our JS files reference sourcemaps relative to their current path. On sites with non-S3 CDN setups, we use a special path for brotli assets (39a524aa). This caused the sourcemap requests to 404.
This commit fixes the issue by allowing the `.map` files to be accessed under `/brotli_asset/*`.
When the `tags_listed_by_group` site setting is enabled, we were seeing
the N+1 queries problem when multiple `TagGroup` records are listed.
This commit fixes that by ensuring that we are not filtering through the
`tags` association after the association has been eager loaded.
This is a very subtle one. Setting the redirect URL is done by passing
a hash through a Discourse event. This is broken on Ruby 2 since the
support for keyword arguments in events was added.
In Ruby 2 the last argument is cast to keyword arguments if it is a
hash. The key point here is that creates a new copy of the hash, so
what the plugin is modifying is not the hash that was passed.
In "GlobalSetting.redirect_avatar_requests" mode, when the application gets
an avatar request it returns a "redirect" to the S3 CDN.
This shields the application from caching avatars and downloading from S3.
However clients will make 2 requests per avatar. (one to get redirect,
second to get avatar)
A one hour cache on a redirect means there may be an increase in CDN
traffic, given more clients will ask for the redirect every hour.
This may also lead to an increase in origin requests to the application.
To mitigate lets cache the CDN URL for 1 day.
The downside is that any changes to S3 CDN need extra care to allow for
the extra 1 day delay. (leave data around for 1 extra day)
Previously, calling `sign_in` would cause the browser to be redirected to `/`, and would cause the Ember app to boot. We would then call `visit()`, causing the app to boot for a second time.
This commit adds a `redirect=false` option to the `/session/username/become` route. This avoids the unnecessary boot of the app, and leads to significantly faster system spec run times.
In local testing, this takes the full system-spec suite for chat from ~6min to ~4min.
We were changing the user's user_option.bookmark_auto_delete_preference
to whatever they changed it to in the bookmark modal to use as default
for future bookmarks. However this was leading to a lot of confusion
since if you wanted to set it for one bookmark you had to remember to
change it back on the next one.
This commit removes that automatic functionality, and instead moves
the bookmark auto delete preference to User Preferences > Interface
in an explicit dropdown.
This commit adds a new notification that gets sent to admins when the site gets new features after an upgrade/deploy. Clicking on the notification takes the admin to the admin dashboard at `/admin` where they can see the new features under the "New Features" section.
Internal topic: t/87166.
1. The events table had broken styling, making each row overflow
2. It had confusing routes: `/:id` for "edit" and `/:id/events` for "show" (now it's `/:id/edit` and `/:id` respectively)
3. There previously was an unused backend action (`#edit`) - now it is used (and `web_hooks/:id/events` route has been removed)
4. There was outdated/misplaced/duplicated CSS
5. And more
* FEATURE: Show similar users when penalizing a user
Moderators will be notified if other users with the same IP address
exist before penalizing a user.
* FEATURE: Allow staff to penalize multiple users
This allows staff members to suspend or silence multiple users belonging
to the same person.
This commit allows us to type # in the UI and present autocomplete
results immediately with the following logic for the topic composer,
and reversed for the chat composer:
* Categories the user can access and has not muted sorted by `topic_count`
* Tags the user can access and has not muted sorted by `topic_count`
* Chat channels the user is a member of sorted by `messages_count`
So in effect, we allow searching for hashtags without a search term.
To do this we add a new `search_without_term` to each data source so
each one can define how it wants to handle this logic.
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
* FEATURE: Show warning if group cannot be mentioned
A similar warning is displayed when the user cannot be mentioned because
they have not been invited to the topic.
* FEATURE: Resolve mentions for new topic
This commit improves several improvements and refactors
/u/is_local_username route to a better /composer/mentions route that
can handle new topics too.
* FEATURE: Show warning if only some are notified
Sometimes users are still notified even if the group that was mentioned
was not invited to the message. This happens because its members were
invited directly or are members of other groups that were invited.
* DEV: Refactor _warnCannotSeeMention
When uploads are stored on S3, by default Discourse will fetch the avatars and proxy them through to the requesting client. This is simple, but it can lead to significant inbound/outbound network load in the hosting environment.
This commit adds an optional redirect_avatar_requests GlobalSetting. When enabled, requests for user avatars will be redirected to the S3 asset instead of being proxied. This adds an extra round-trip for clients, but it should significantly reduce server load. To mitigate that extra round-trip for clients, a CDN with 'follow redirect' capability could be used.
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
While load testing our user creation code path in production, we
identified that executing the DB statement to update the `Group#user_count` column within a
transaction is creating a bottleneck for us. This is because the
creation of a user and addition of the user to the relevant groups are
done in a transaction. When we execute the DB statement to update
`Group#user_count` for the relevant group, a row level lock is held
until the transaction completes. This row level lock acts like a global
lock when the server is creating users that will be added to the same
group in quick succession.
Instead of updating the counter cache within a transaction which the
default ActiveRecord `counter_cache` option does, we simply update the
counter cache outside of the committing transaction.
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
I'm hesitant to call this a performance improvement since claiming a
reviewable is probably rare. However, this commit cuts out two DB
queries each time we have to publish a reviewable claimed message. More
importantly, publishing to groups scales much better than publishing to
users because we esstentially cap the number ids we have to load into
memory.
This adds API scope for the user status. This also adds a get method to the user status controller. We didn't need a dedicated method that returns status before because the server returns status with user objects, but I think we need to provide this method for API clients.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
* FEATURE: API to update user's discourse connect external id
This adds a special handling of updates to DiscourseConnect external_id
in the general user update API endpoint.
Admins can create, update or delete a user SingleSignOn record using
PUT /u/:username.json
{
"external_ids": {
"discourse_connect": "new-external-id"
}
}
When opening the invite acceptance page when the user
was already logged in, we were still showing the Accept
Invitation prompt even if the user had already redeemed
the invitation and was present in the `InvitedUser` table.
This would lead to errors when the user clicked on the button.
This commit fixes the issue by hiding the Accept Invitation
button and showing an error message instead indicating that
the user had already redeemed the invitation. This only applies
to multi-use invite links.
The problem was reported as a problem with changing theme in user preferences, after saving a new theme the previously set user status was disappearing (https://meta.discourse.org/t/user-status/240335/42). Turned out though that the problem was more wide, changing pretty much any setting in user preferences apart from user status itself led to clearing the status.
This commit adds some protections in InviteRedeemer to ensure that email
can never be nil, which could cause issues with inviting the invited
person to private topics since there was an incorrect inner join.
If the email is nil and the invite is scoped to an email, we just use
that invite.email unconditionally. If a redeeming_user (an existing
user) is passed in when redeeming an email, we use their email to
override the passed in email. Otherwise we just use the passed in
email. We now raise an error after all this if the email is still nil.
This commit also adds some tests to catch the private topic fix, and
some general improvements and comments around the invite code.
This commit also includes a migration to delete TopicAllowedUser records
for users who were mistakenly added to topics as part of the invite
redemption process.
Currently, moderators are able to set primary group for users
irrespective of the of the `moderators_manage_categories_and_groups` site
setting value.
This change updates Guardian implementation to honour it.
This commit fixes the issue where the sub-category topic list was not
loading for new-topic routes. Since we do not need to preload topic
lists for new topic/message routes this commit adds a no-op controller
that prevents topic lists pre loading and at the same time fixes the sub
category topics not loading issue.
Previously, we didn't have a site-wide setting to set the default behavior for user profile visibility and user presence features. But we already have a user preference for that.
* DEV: Add a dedicated Admin::StaffController base controller
The current parent(Admin:AdminController) for all admin-related controllers
uses a filter that allows only staff(admin, moderator) users.
This refactor makes Admin::AdminController filter for only admins as the name suggests and
introduces a base controller dedicated for staff-related endpoints.
* DEV: Set staff-only controllers parent to Admin::StaffController
Refactor staff-only controllers to inherit newly introduced
Admin::StaffController abstract controller. This conveys the
purpose of the parent controller better unlike the previously used parent
controller.
* FIX: Follow up fixes for password-reset error page
Pass in `base_url` to the template
Use `.html_safe` since the message now contains html
Follow up to: 9b1536fb83
* Update specs to pass in the base_url
Before this commit, we did not have guardian checks in place to determine if a
topic's title associated with a user badge should be displayed or not.
This means that the topic title of topics with restricted access
could be leaked to anon and users without access if certain conditions
are met. While we will not specify the conditions required, we have internally
assessed that the odds of meeting such conditions are low.
With this commit, we will now apply a guardian check to ensure that the
current user is able to see a topic before the topic's title is included
in the serialized object of a `UserBadge`.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
This commit adds a new `/hashtag/search` endpoint and both
relevant JS and ruby plugin APIs to handle plugins adding their
own data sources and priority orders for types of things to search
when `#` is pressed.
A `context` param is added to `setupHashtagAutocomplete` which
a corresponding chat PR https://github.com/discourse/discourse-chat/pull/1302
will now use.
The UI calls `registerHashtagSearchParam` for each context that will
require a `#` search (e.g. the topic composer), for each type of record that
the context needs to search for, as well as a priority order for that type. Core
uses this call to add the `category` and `tag` data sources to the topic composer.
The `register_hashtag_data_source` ruby plugin API call is for plugins to
add a new data source for the hashtag searching endpoint, e.g. discourse-chat
may add a `channel` data source.
This functionality is hidden behind the `enable_experimental_hashtag_autocomplete`
flag, except for the change to `setupHashtagAutocomplete` since only core and
discourse-chat are using that function. Note this PR does **not** include required
changes for hashtag lookup or new styling.
This commit excludes posts from hidden topics from the latest posts and user activity RSS feeds. Additionally, it also excludes small actions from the first one.
Theme javascript is now minified using Terser, just like our core/plugin JS bundles. This reduces the amount of data sent over the network.
This commit also introduces sourcemaps for theme JS. Browser developer tools will now be able show each source file separately when browsing, and also in backtraces.
For theme test JS, the sourcemap is inlined for simplicity. Network load is not a concern for tests.
This commit introduces a new framework for building user tutorials as
popups using the Tippy JS library. Currently, the new framework is used
to replace the old notification spotlight and tips and show a new one
related to the topic timeline.
All popups follow the same structure and have a title, a description and
two buttons for either dismissing just the current tip or all of them
at once.
The state of all seen popups is stored in a user option. Updating
skip_new_user_tips will automatically update the list of seen popups
accordingly.
* Revert "Revert "FEATURE: Preload resources via link header (#18475)" (#18511)"
This reverts commit 95a57f7e0c.
* put behind feature flag
* env -> global setting
* declare global setting
* forgot one spot
Unless we have specified `override = true` in the DeprecatedSettings
class for an old -> new settings map, we should not allow people
to change the old setting in the UI and have it affect the new
setting.
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
Experiment moving from preload tags in the document head to preload information the the response headers.
While this is a minor improvement in most browsers (headers are parsed before the response body), this allows smart proxies like Cloudflare to "learn" from those headers and build HTTP 103 Early Hints for subsequent requests to the same URI, which will allow the user agent to download and parse our JS/CSS while we are waiting for the server to generate and stream the HTML response.
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Adds a new upload field for a second dark mode category logo.
This alternative will be used when the browser is in dark mode (similar to the global site setting for a dark logo).
This commit makes pending reviewables show up in the main tab (a.k.a. "all notifications" tab). Pending reviewables along with unread notifications are always shown first and they're sorted based on their creation date (most recent comes first).
The dismiss button currently only shows up if there are unread notifications and it doesn't dismiss pending reviewables. We may follow up with another change soon that allows makes the dismiss button work with reviewables and remove them from the list without taking any action on them.
Follow-up to 079450c9e4.
This commit adds non-archived group messages and `group_message_summary` notifications in the messages tab in the user menu. With this change, the messages tab in the user menu now includes 3 types of items:
1. Unread `private_message` notifications (notifications when you receive a reply in a PM)
2. Unread and read `group_message_summary` notifications (notifications when there's a new message in a group inbox that you track)
3. Non-archived personal and group messages
Unread `private_message` notifications are always shown first, followed by unread `group_message_summary` notifications, and then everything else (messages and read `group_message_summary` notifications) sorted by recency (most recent first).
Internal topic: t/72976.
Currently, the reviewables tab in the user menu shows pending reviewables at the top of the menu and fills the remaining space in the menu with old/handled reviewables. This PR makes the revieables tab show only pending reviewables and hides the tab altogether from the menu if there are no pending reviewables. We're going to follow-up with another change soon that will show pending reviewables in the main tab of the user menu.
Internal topic: t/73220.
* SECURITY: moderator shouldn't be able to import a theme via API.
* DEV: apply `AdminConstraint` for all the "themes" routes.
Co-authored-by: Vinoth Kannan <svkn.87@gmail.com>
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
* FEATURE: add composer warning when user haven't been seen in a long time
When a user creates a PM and adds a recipient that hasn't been seen in a
long time then we'll now show a warning in composer indicating that the
user hasn't been seen in a long time.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
The generate RSA key and import theme routes worked separate from each
other. The RSA key returned both the public and private key and it was
the frontend which posted the private key back to the server. With this
commit, only the public key is necessary as the server keeps a map of
public and private keys that is used to get the private key back from
a public key.
`TopicQueryParams` allows for `match_all_tags` to be passed as a query parameter. `TagsController` forces the value to be true.
This change allows a value to be passed, and only sets it to true if no value has been set. It then uses `ActiveModel::Type::Boolean.new.cast` to compare the value.
Previously, this would require manually adding `?safe_mode=...` multiple times during the email-based login flow. `/u/admin-login` is often used when debugging a site, so it makes sense for this to be easier.
This commit introduces a new checkbox on the `/u/admin-login` screen. When checked, it'll set the safe_mode parameter on the `/email-login` link, and then pass it all the way through to the homepage redirect.
- `no_custom` -> `no_themes` (history: before themes existed, we had a similar tool called 'customizations')
- `only_official` -> `no_unofficial_plugins` (matches format of `no_themes` and `no_plugins`, and makes it clear that this doesn't affect themes)
- `?safe_mode=no_themes%2C%no_plugins` -> `?safe_mode=no_themes,no_plugins` (the query portion of a URL does not require commas to be encoded. This is much nicer to read)
- If `no_plugins` is chosen from `/safe-mode` the URL generated will omit the superfluous `no_unofficial_plugins` flag
- Some tweaks to copy on `/safe-mode`
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
Some of the changes in this PR are extracted from https://github.com/discourse/discourse/pull/17379.
Similar to the bookmarks tab in the new user menu, the messages tab also displays a mix of notifications and messages. When there are unread message notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with a list of the user's messages. The bubble/badge count on the messages tab indicates how many unread message notifications there are.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Follow up to 4d3c1ceb44, this commit
shows the SMTP response in the admin email sent list and also moves the
topic/post link into a new column. Reply key is now in its own column.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
Some errors (e.g. InvalidAccess) are rendered with `include_ember: true`. Booting the ember app requires that the 'preload' data is rendered in the HTML.
If a particular route was configured to `skip_before_action :preload_json`, and then went on to raise an InvalidAccess error, then we'd attempt to render the Ember app without the preload json. This led to a blank screen and a client-side error.
This commit ensures that error pages will fallback to the no_ember view if there is no preload data. It also adds a sanity check in `discourse-bootstrap` so that it's easier for us to identify similar errors in future.
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
The idea behind this refactor is to centralise all of the user ignoring / muting / disallow PM checks in a single place, so they can be used consistently in core as well as for plugins like chat, while improving the main bulk of the checks to run in a single fast non-AR query.
Also fixed up the invite error when someone is muting/ignoring the user that is trying to invite them to the topic.
* FIX: Posts can belong to hard-deleted topics
This was a problem when serializing deleted posts because they might
belong to a topic that was permanently deleted. This caused to DB
lookup to fail immediately and raise an exception. In this case, the
endpoint returned a 404.
* FIX: Remove N+1 queries
Deleted topics were not loaded because of the default scope that
filters out all deleted topics. It executed a query for each deleted
topic.
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
When calling the API to delete a user:
```
curl -X DELETE "https://discourse.example.com/admin/users/159.json" \
-H "Content-Type: multipart/form-data;" \
-H "Api-Key: ***" \
-H "Api-Username: ***" \
-F "delete_posts=true" \
-F "block_email=false" \
-F "block_urls=false" \
-F "block_ip=false"
```
Setting the parameters `block_email`, `block_urls` and `block_ip`explicitly to `false` did not work because the values weren't being parsed to boolean.
In certain situations, a logged in user can redeem an invite with an email that
either doesn't match the invite's email or does not adhere to the email domain
restriction of an invite link. The impact of this flaw is aggrevated
when the invite has been configured to add the user that accepts the
invite into restricted groups.
Certain rogue bots such as Yandex may send across invalid CSP reports
when CSP report collection is enabled.
This ensures that invalid reports will not cause log floods and simply
returns a 422 error.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
Presence endpoints are often called asynchronously at the same time as other request, and never need to modify the session. Skipping ensures that an unneeded cookie rotation doesn't race against another request and cause issues.
This change brings presence in line with message-bus's behaviour.
As part of this commit, a bug where updating a tag's notification level on the server side does not update the state of the user's tag notification levels on the client side is fixed too.
The `WebhookController` inherits directly from `ActionController::Base`. Since Rails 5.2, forgery protection has been enabled by default. When we applied those new defaults in 0403a8633b, it took effect on this controller and broke integrations.
This commit explicitly disables CSRF protection on these webhook routes, and updates the specs so they'll catch this kind of regression in future.
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previous to this fix, in production we were getting 500 errors from
bootstrap.json cause script_asset_path can not find plugin-tests
Opted for the simplest fix that is omitting the files in production
Previously we limited Discourse Connect provider to 1 secret per domain.
This made it pretty awkward to cycle secrets in environments where config
takes time to propagate
This change allows for the same domain to have multiple secrets
Also fixes internal implementation on DiscourseConnectProvider which was
not thread safe as it leaned on class variables to ferry data around
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
When searching for PMs or PMs in a group inbox, results in the header search were not being limited to 5 with a "More" link to the full page search. This PR fixes that.
It also simplifies the logic and updates the search API docs to include recently added `in:messages` and `group_messages:groupname` options.
When saving / creating bookmarks, we have code to save
the user's preference of bookmark_auto_delete_preference
to their user_options.
Unfortunately this can cause weirdness when plugins
have code using BookmarkManager to set the auto delete preference for
only a specific bookmark.
This commit introduces a save_user_preferences option (false
by default) so that this user preference is not saved unless
specified by the consumer of BookmarkManager, so plugins will
not have to worry about it.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
