The `deprecate_column` helper would change its behavior based on the current `Discourse::VERSION`. This means that 'finalizing' a stable release introduces a previously untested behavior change.
Much better to keep it as a deprecation until manual action is taken to introduce the breaking change.
Internal links always notify and add internal connections in topics.
This adds a special feature that lets you append `?silent=true` to a link
to have it excluded from:
1. Notifications - users will not be notified for these links
2. Post links below posts in the UI
This is specifically useful for large reports where adding all these connections
just results in noise.
Running Discourse 3.2 stable under Ember 3 will technically be possible, but is only intended as a short-term migration point. This commit adds an admin warning for sites which are using this configuration, to make it clear that themes and plugins are unlikely to support the configuration.
https://meta.discourse.org/t/287211
We want to exclude the system user from group user counts, since intuitively admins wouldn't include them.
Originally this was accomplished by booting said system user from the groups, but this is causing problems, because the system user needs TL group membership to perform certain tasks.
After this PR, system user is still in the TL groups, but excluded when refreshing the user count.
Some preparatory refactoring as we're working on TL groups for the system user. On User we have a scope #human_users to exclude the system user, DiscoBot, etc. This PR adds the same scope (delegated to User) on Group.
We added support for radar type charts in #24274. However, radar charts work with three variables, meaning we can't display any report that way.
Unfortunately, by adding `:radar` to the `Report#modes` variable, I made them widely available.
Related bug report: https://meta.discourse.org/t/report-radar-graph-uncaught-typeerror/292360
This is a temporary fix to address an issue where the
system user is losing its automatic groups when the server
is running. If any auto groups are provided, and the user is
a system user, then we return true. The system user is admin,
moderator, and TL4, so they usually have all auto groups.
We can remove this when we get to the bottom of why the auto
groups are being deleted.
The old strategy used to load 25 categories at a time, including the
subcategories. The new strategy loads 20 parent categories and at most
5 subcategories for each parent category, for a maximum of 120
categories in total.
- Decrease gravity, we come in too hot prioritizing too many new topics
- Remove all muted topics / categories and tags from the hot list
- Punish topics with zero likes in algorithm
This introduces a new experimental hot sort ordering.
It attempts to float top conversations by first prioritizing a topics with lots of recent activity (likes and users responding)
The schedule that updates hot topics is disabled unless the hidden site setting: `experimental_hot_topics` is enabled.
You can control "decay" with `hot_topic_gravity` and `recency` with `hot_topics_recent_days`
Data is stored in the new `topic_hot_scores` table and you can check it out on the `/hot` route once
enabled.
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Previously only Sidekiq was allowed to generate more than one optimized image at the same time per machine. This adds an easy mechanism to allow the same in rake tasks and other tools.
Why this change?
Currently, is it hard to iteratively write a theme settings migrations
because our theme migrations system does not rollback. Therefore, we
want to allow theme developers to be able to write QUnit tests for their
theme migrations files enabling them to iteratively write their theme
migrations.
What does this change do?
1. Update `Theme#baked_js_tests_with_digest` to include all `ThemeField`
records of `ThemeField#target` equal to `migrations`. Note that we do
not include the `settings` and `themePrefix` variables for migration files.
2. Don't minify JavaScript test files becasue it makes debugging in
development hard.
Why this change?
We have been chasing a problem with our flaky system test where the user
is logged out when it should never be.
What does this change do?
1. Logs the request path when lookup a user auth token.
2. Logs the request path and also the current thread's object id in
ActiveRecord query logs.
* FIX: respect creation date when paginating group activity posts
There are scenarios where the chronological order of posts doesn't match the order of their IDs. For instance, when moving the first post from one topic or PM to another, a new post (with a higher ID) will be created, but it will retain the original creation time.
This PR changes the group activity page and endpoint to paginate posts using created_at instead of relying on ID ordering.
Why this change?
Importing theme with the `bundle` params is used mainly by
`discourse_theme` CLI in the development environment. However, we do not
want migrations to automatically run in the development environment
and instead want the developer to be intentional about running theme
migrations. As such, this commit adds support for a
`skip_migrations` param when importing a theme with the `bundle` params.
This commit also adds a `migrated` attribute for migrations theme fields
to indicate whether a migrations theme field has been migrated or not.
The query that is now a subquery could return a long list of category
IDs, which slowed down the query considerably. This improvement reduces
the execution time from over 2 seconds down to about 100ms.
* FEATURE: Cache embed contents in the database
This will be useful for features that rely on the semantic content of topics, like the many AI features
Co-authored-by: Roman Rizzi <rizziromanalejandro@gmail.com>
- Convert group based `experimental_search_menu_groups_enabled` site setting to be a _hidden_ boolean `experimental_search_menu` setting.
- Make default `true`
- Remove widget search menu tests
Discourse Encrypt Test Failure Fix - https://github.com/discourse/discourse-encrypt/pull/301
Followup to b92993fcee
I ran out of time to get this working for that fix,
also here I am making the post.url method have parity
with post.shareUrl in JS, which omits the post number
for the first post.
Currently, the reviewable queue includes ReviewableFlaggedPost with posts that have already been hidden. This allows for such hidden posts to be cleared up by the auto-tool.
Categories will no longer be preloaded when `lazy_load_categories` is
enabled through PreloadStore.
Instead, the list of site categories will continue to be populated
by `Site.updateCategory` as more and more categories are being loaded
from different sources (topic lists, category selectors, etc).
When setting an old TL based site setting in the console e.g.:
SiteSetting.min_trust_level_to_allow_ignore = TrustLevel[3]
We will silently convert this to the corresponding Group::AUTO_GROUP. And vice-versa, when we read the value on the old setting, we will automatically get the lowest trust level corresponding to the lowest auto group for the new setting in the database.
When updating the position of a category, the server correctly updates the position in the database, but the response sent back to the client still contains the old position, causing it to "flip back" in the UI when saving. Only reloading the page will reveal the new, correct value.
The Positionable concern correctly positions the record and updates the database, but we don't assign the new position to the already instantiated model.
This change just assigns self.position after the database update. 😎
Adds an API scope for accessing Logster's routes. This one is a bit
different than routes from core because it is mounted like
```
mount Logster::Web => "/logs"
```
and doesn't have all the route info a traditional rails app/engine does.
Settings that are using the new `file_size_restriction` types like the
`max_image_size_kb` setting need to have their values saved as integers.
This was a recent regression in 00209f03e6
that caused these values to be saved as strings.
This change also removes negatives from the validation regex because
file sizes can't be negative anyways.
Bug report: https://meta.discourse.org/t/289037
This commit refactor CategoryList to remove usage of EmberObject,
hopefully make the code more readable and fixes various edge cases with
lazy loaded categories (third level subcategories not being visible,
subcategories not being visible on category page, requesting for more
pages even if the last one did not return any results, etc).
The problems have always been here, but were not visible because a lot
of the processing was handled by the server and then the result was
serialized. With more of these being moved to the client side for the
lazy category loading, the problems became more obvious.
This is v0 of admin sidebar navigation, which moves
all of the top-level admin nav from the top of the page
into a sidebar. This is hidden behind a enable_admin_sidebar_navigation
site setting, and is opt-in for now.
This sidebar is dynamically shown whenever the user enters an
admin route in the UI, and is hidden and replaced with either
the:
* Main forum sidebar
* Chat sidebar
Depending on where they navigate to. For now, custom sections
are not supported in the admin sidebar.
This commit removes the experimental admin sidebar generation rake
task but keeps the experimental sidebar UI for now for further
testing; it just uses the real nav as the default now.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_to_edit_post site setting to edit_post_allowed_groups.
The old implementation will co-exist for a short period while I update any references in plugins and themes.
Applies the embed_unlisted site setting consistently across topic embeds, including those created via the WP Discourse plugin. Relatedly, adds a embed exception to can_create_unlisted_topic? check. Users creating embedded topics are not always staff.
When `lazy_load_categories` is enabled, the categories are no longer
preloaded in the `Site` object, but instead they are being requested
on a need basis.
The categories page still loaded all categories at once, which was not
ideal for sites with many categories because ti would take a lot of
time to build and parse the response.
This commit adds pagination to the categories page using the LoadMore
helper. As the user scrolls through the categories page, more categories
are requested from the server and appended to the page.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This script preprocesses all uploads within a intermediate DB (output of converters) and uploads those files to S3. It does the same for optimized images. This speeds up migrations when you have to run them multiple times, because you only have to preprocess and upload the files once.
This script is very hacky and mostly undocumented for now. That will change in the future.
A lot of work has been put in the select kits used for selecting
categories: CategorySelector, CategoryChooser, CategoryDrop, however
they still do not work as expected when these selectors already have
values set, because the category were still looked up in the list of
categories stored on the client-side Categrories.list().
This PR fixes that by looking up the categories when the selector is
initialized. This required altering the /categories/find.json endpoint
to accept a list of IDs that need to be looked up. The API is called
using Category.asyncFindByIds on the client-side.
CategorySelector was also updated to receive a list of category IDs as
attribute, instead of the list of categories, because the list of
categories may have not been loaded.
During this development, I noticed that SiteCategorySerializer did not
serializer all fields (such as permission and notification_level)
which are not a property of category, but a property of the relationship
between users and categories. To make this more efficient, the
preload_user_fields! method was implemented that can be used to
preload these attributes for a user and a list of categories.
When rebaking and in various other places for posts, we
run through the uploads and call `update_secure_status` on
each of them.
However, if the secure status didn't change, we were still
calling S3 to change the ACL, which would have been a noop
in many cases and takes ~1 second per call, slowing things
down a lot.
Also, we didn't account for the s3_acls_enabled site setting
being false here, and in the specs doing an assertion
that `Discourse.store.update_ACL` is not called doesn't
work; `Discourse.store` isn't a singleton, it re-initializes
`FileStore::S3Store.new` every single time.
The category drop was rerendered after every category async change
because it updated the categories list. This is not necessary and
categories can be referenced indirectly by ID instead.
This value is included when generating static asset URLs. Updating the value will allow site operators to invalidate all asset urls to recover from configuration issues which may have been cached by CDNs/browsers.
When we check upload security, one of the checks is to
run `access_control_post.with_secure_uploads?`. The problem
here is that the `topic` for the post could be deleted,
which would make the check return `nil` sometimes instead
of false because of safe navigation. We just need to be
more explicit.
Admin can add tag description up to 1000 characters.
Full description is displayed on tag page, however on topic list it is truncated to 80 characters.
Followup to 2443446e62
We introduced video placeholders which prevent preloading
metadata for videos in posts. The structure looks like this
in HTML when the post is cooked:
```
<div class="video-placeholder-container" data-video-src="http://some-url.com/video.mp4" dir="ltr" style="cursor: pointer;">
<div class="video-placeholder-wrapper">
<div class="video-placeholder-overlay">
<svg class="fa d-icon d-icon-play svg-icon svg-string" xmlns="http://www.w3.org/2000/svg">
<use href="#play"></use>
</svg>
</div>
</div>
</div>
```
However, we did not update the code that links post uploads
to the post via UploadReference, so any videos uploaded since
this change are essentially dangling and liable to be deleted.
This also causes some uploads to be marked secure when they
shouldn't be, because they are not picked up and analysed in the
CookedPostProcessor flow.
The parent category needs to be serialized before the child category
because they are parsed in order. Otherwise the client will not build
the parent-child relationship correctly.
Operate a key at a time, to make it clearer what's going on.
This also fixes a bug where array integer fields would get re-written
even when there wasn't a change.
Array custom fields use separate rows for each value, but whenever we
update an array, we have always destroy the existing rows and create new
ones. Therefore, there's no benefit over using the json type.
This commit adds a new `search_default_sort_order` site setting,
set to "relevance" by default, that controls the default sort order
for the full page /search route.
If the user changes the order in the dropdown on that page, we remember
their preference automatically, and it takes precedence over the site
setting as a default from then on. This way people who prefer e.g.
Latest Post as their default can make it so.
en is the only fallback locale we use, so there's no need to invalidate everything when other languages change. Limiting this also helps to prevent circular dependent_field relations which could cause issues in some situations.
Followup to eda79186ee
Why this change?
As the number of themes which the Discourse team supports officially
grows, we want to ensure that changes made to Discourse core do not
break the plugins. As such, we are adding a step to our Github actions
test job to run the QUnit tests for all official themes.
What does this change do?
This change adds a new job to our tests Github actions workflow to run the QUnit
tests for all official plugins. This is achieved with the following
changes:
1. Update `testem.js` to rely on the `THEME_TEST_PAGES` env variable to set the
`test_page` option when running theme QUnit tests with testem. The
`test_page` option [allows an array to be specified](https://github.com/testem/testem#multiple-test-pages) such that tests for
multiple pages can be run at the same time. We are relying on a ENV variable
because the `testem` CLI does not support passing a list of pages
to the `--test_page` option.
2. Support a `/testem-theme-qunit/:testem_id/theme-qunit` Rails route in the development environment. This
is done because testem prefixes the path with a unique ID to the configured `test_page` URL.
This is problematic for us because we proxy all testem requests to the
Rails server and testem's proxy configuration option does not allow us
to easily rewrite the URL to remove the prefix. Therefore, we configure a proxy in testem to prefix `theme-qunit` requests with
`/testem-theme-qunit` which can then be easily identified by the Rails server and routed accordingly.
3. Update `qunit:test` to support a `THEME_IDS` environment variable
which will allow it to run QUnit tests for multiple themes at the
same time.
4. Support `bin/rake themes:qunit[ids,"<theme_id>|<theme_id>"]` to run
the QUnit tests for multiple themes at the same time.
5. Adds a `themes:qunit_all_official` Rake task which runs the QUnit
tests for all the official themes.
Previously we would only recompile a theme locale when its own data changes. However, the output also includes fallback data from other locales, so we need to invalidate all locales when fallback locale data is changed. Building a list of dependent locales is tricky, so let's just invalidate them all.
Followup to fe05fdae24
For consistency with other S3 settings, make the global setting
the same name as the site setting and use SiteSetting.Upload
too so it reads from the correct place.
This adds the ability to collect stats without exposing them
among other stats via API.
The most important thing I wanted to achieve is to provide
an API where stats are not exposed by default, and a developer
has to explicitly specify that they should be
exposed (`expose_via_api: true`). Implementing an opposite
solution would be simpler, but that's less safe in terms of
potential security issues.
When working on this, I had to refactor the current solution.
I would go even further with the refactoring, but the next steps
seem to be going too far in changing the solution we have,
and that would also take more time. Two things that can be
improved in the future:
1. Data structures for holding stats can be further improved
2. Core stats are hard-coded in the About template (it's hard
to fix it without correcting data structures first, see point 1):
63a0700d45/app/views/about/index.html.erb (L61-L101)
The most significant refactorings are:
1. Introducing the `Stat` model
2. Aligning the way the core and the plugin stats' are registered
There was a registry for preloaded site categories and a new one has
been introduced recently for categories serialized through a
CategoryList.
Having two registries created a lot of friction for developers and this
commit merges them into a single one, providing a unified API.
There is an edge case where the following occurs:
1. The user sets a bookmark reminder on a post/topic
2. The post/topic is changed to a PM before or after the reminder
fires, and the notification remains unread by the user
3. The user opens their bookmark reminder notification list
and they can still see the notification even though they cannot
access the topic anymore
There is a very low chance for information leaking here, since
the only thing that could be exposed is the topic title if it
changes to something sensitive.
This commit filters the bookmark unread notifications by using
the bookmarkable can_see? methods and also prevents sending
reminder notifications for bookmarks the user can no longer see.
When quoting a chat message in a post, if that message contains a mention,
that mention should be ignored. But we've been detecting them and sending
notifications to users. This PR fixes the problem. Since this fix is for
the chat plugin, I had to introduce a new API for plugins:
# We strip posts before detecting mentions, oneboxes, attachments etc.
# We strip those elements that shouldn't be detected. For example,
# a mention inside a quote should be ignored, so we strip it off.
# Using this API plugins can register their own post strippers.
def register_post_stripper(&block)
end
We updated scheduled admin checks to run concurrently in their own jobs. The main reason for this was so that we can implement re-check functionality for especially flaky checks (e.g. group e-mail credentials check.)
This works in the following way:
1. The check declares its retry policy using class methods.
2. A block can be yielded to if there are problems, but before they are committed to Redis.
3. The job uses this block to either a) schedule a retry if there are any remaining or b) do nothing and let the check commit.
This PR does some preparatory refactoring of scheduled admin checks in order for us to be able to do custom retry strategies for some of them.
Instead of running all checks in sequence inside a single, scheduled job, the scheduled job spawns one new job per check.
In order to be concurrency-safe, we need to change the existing Redis data structure from a string (of serialized JSON) to a list of strings (of serialized JSON).
This commit introduces a new feature that allows theme developers to manage the transformation of theme settings over time. Similar to Rails migrations, the theme settings migration system enables developers to write and execute migrations for theme settings, ensuring a smooth transition when changes are required in the format or structure of setting values.
Example use cases for the theme settings migration system:
1. Renaming a theme setting.
2. Changing the data type of a theme setting (e.g., transforming a string setting containing comma-separated values into a proper list setting).
3. Altering the format of data stored in a theme setting.
All of these use cases and more are now possible while preserving theme setting values for sites that have already modified their theme settings.
Usage:
1. Create a top-level directory called `migrations` in your theme/component, and then within the `migrations` directory create another directory called `settings`.
2. Inside the `migrations/settings` directory, create a JavaScript file using the format `XXXX-some-name.js`, where `XXXX` is a unique 4-digit number, and `some-name` is a descriptor of your choice that describes the migration.
3. Within the JavaScript file, define and export (as the default) a function called `migrate`. This function will receive a `Map` object and must also return a `Map` object (it's acceptable to return the same `Map` object that the function received).
4. The `Map` object received by the `migrate` function will include settings that have been overridden or changed by site administrators. Settings that have never been changed from the default will not be included.
5. The keys and values contained in the `Map` object that the `migrate` function returns will replace all the currently changed settings of the theme.
6. Migrations are executed in numerical order based on the XXXX segment in the migration filenames. For instance, `0001-some-migration.js` will be executed before `0002-another-migration.js`.
Here's a complete example migration script that renames a setting from `setting_with_old_name` to `setting_with_new_name`:
```js
// File name: 0001-rename-setting.js
export default function migrate(settings) {
if (settings.has("setting_with_old_name")) {
settings.set("setting_with_new_name", settings.get("setting_with_old_name"));
}
return settings;
}
```
Internal topic: t/109980
The User#flag_level column has not been in use for a very long time. The "new" reviewable system dynamically calculates flag scores based on past performance of the user.
This PR removes flag_level from the admin user serializer (since it isn't displayed anywhere in admin user lists) and marks the column as deprecated and targeted for removal in the next minor version.
The message: :signup_not_allowed option to the IP address validator does nothing, because the AllowedIpAddressValidator chooses one of either:
- ip_address.blocked or
- ip_address.max_new_accounts_per_registration_ip
internally. This means that the translation for this was also never used.
This PR removes the ineffectual option and the unused translation. It also moves the translated error messages for blocked and max_new_accounts_per_registration_ip into the correct location so we can pass a symbol to ActiveModel::Errors#add.
There is no actual change in behaviour.
Followup to 9762e65758. This
original commit did not take into account the fact that
new topics can end up in the approval queue as a
ReviewableQueuedPost, and so there was a 500 error raised
when accessing `self.topic` when sending a PM to the user.
Using SiteSetting.queue_jobs= to configure job asynchronicity was deprecated here four years ago and marked for removal in version 2.9.0. This PR removes the fallback method we kept since then. The method was there because it was still being used in a bunch of plugin tests (now fixed.)
The PostAction.remove_act class method has been deprecated and replaced by PostActionDestroyer. It was marked for removal in version 2.9.0. This PR removes the method.
Why this change?
Currently, we do not have a method to easily retrieve a theme setting's
value on the server side. Such a method can be useful in the test
environment where we need to retrieve the theme's setting and use its
value in assertions.
What does this change do?
This change introduces the `Theme#get_setting` instance method.
This change adds a new event trigger (new_post_moved) when the first post in a topic is moved to a new topic.
Plugins that listen for the new_post_moved event now have an easy way to update old data based on the post id.
There are a few PUT requests that users can do in their preferences tab that aren't going through the standard `user#update` action.
This commit adds all the "trivial" ones (aka. except the security-related one, username and email changes) so you can now change the badge title, the avatar or featured topic of a user via the API.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
* FIX: Secure upload post processing race condition
This commit fixes a couple of issues.
A little background -- when uploads are created in the composer
for posts, regardless of whether the upload will eventually be
marked secure or not, if secure_uploads is enabled we always mark
the upload secure at first. This is so the upload is by default
protected, regardless of post type (regular or PM) or category.
This was causing issues in some rare occasions though because
of the order of operations of our post creation and processing
pipeline. When creating a post, we enqueue a sidekiq job to
post-process the post which does various things including
converting images to lightboxes. We were also enqueuing a job
to update the secure status for all uploads in that post.
Sometimes the secure status job would run before the post process
job, marking uploads as _not secure_ in the background and changing
their ACL before the post processor ran, which meant the users
would see a broken image in their posts. This commit fixes that issue
by always running the upload security changes inline _within_ the
cooked_post_processor job.
The other issue was that the lightbox wrapper link for images in
the post would end up with a URL like this:
```
href="/secure-uploads/original/2X/4/4e1f00a40b6c952198bbdacae383ba77932fc542.jpeg"
```
Since we weren't actually using the `upload.url` to pass to
`UrlHelper.cook_url` here, we weren't converting this href to the CDN
URL if the post was not in a secure context (the UrlHelper does not
know how to convert a secure-uploads URL to a CDN one). Now we
always end up with the correct lightbox href. This was less of an issue
than the other one, since the secure-uploads URL works even when the
upload has become non-secure, but it was a good inconsistency to fix
anyway.
This reverts commit 5f0bc4557f.
Through extensive internal discussion we have decided to revert
this change, as it significantly impacted moderation flow for
some Discourse site moderators, especially around "something else"
flags. We need to re-approach how flags are counted holistically,
so to that end this change is being reverted.
Site data is preloaded on the first page load, which includes categories
data. For sites with many categories, site data takes a long time to
serialize and to transfer.
In the future, preloaded category data will be completely removed.
The category style site setting is being deprecated. This commit will
show a warning on the admin dashboard if a site isn't using the default
category style (bullet).
At this moment, this feature is under a site setting named
lazy_load_categories.
In the future, categories will no longer be preloaded through site data.
This commit add information about categories in topic list and ensures
that data is used to display topic list items.
Parent categories are serialized too because they are necessary to
render {{category-link}}.
There are cases where a user can copy image markdown from a public
post (such as via the discourse-templates plugin) into a PM which
is then sent via an email. Since a PM is a secure context (via the
.with_secure_uploads? check on Post), the image will get a secure
URL in the PM post even though the backing upload is not secure.
This fixes the bug in that case where the image would be stripped
from the email (since it had a /secure-uploads/ URL) but not re-attached
further down the line using the secure_uploads_allow_embed_images_in_emails
setting because the upload itself was not secure.
The flow in Email::Sender for doing this is still not ideal, but
there are chicken and egg problems around when to strip the images,
how to fit in with other attachments and email size limits, and
when to apply the images inline via Email::Styles. It's convoluted,
but at least this fixes the Template use case for now.
Why this change?
The `PostsController#create` action allows arbitrary topic custom fields
to be set by any user that can create a topic. Without any restrictions,
this opens us up to potential security issues where plugins may be using
topic custom fields in security sensitive areas.
What does this change do?
1. This change introduces the `register_editable_topic_custom_field` plugin
API which allows plugins to register topic custom fields that are
editable either by staff users only or all users. The registered
editable topic custom fields are stored in `DiscoursePluginRegistry` and
is called by a new method `Topic#editable_custom_fields` which is then
used in the `PostsController#create` controller action. When an unpermitted custom fields is present in the `meta_data` params,
a 400 response code is returned.
2. Removes all reference to `meta_data` on a topic as it is confusing
since we actually mean topic custom fields instead.
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
We run the ember-this-fallback transformation on plugin and theme code so that they can continue omitting `this.` in `.hbs` templates. A bug in the implementation meant that it was incorrectly transforming things like `{{dir/some-component}}` into `<DirSomeComponent />` (rather than `<Dir::SomeComponent />`).
This commit uses patch-package to apply the fix from https://github.com/tildeio/ember-this-fallback/pull/56
When a user creates or edits a post, we already were updating
the security of uploads in the post based on site settings and
their access control post, which is important since these uploads
may be switched from secure/not secure based on configuration.
The `with_secure_uploads?` method on a post is used to determine
whether to use the secure-uploads URL for all uploads in the post,
regardless of their individual security, so if this is false and
some of the posts are still secure when rebaking, we end up with
broken URLs.
This commit just makes it so rebaking via the UI also re-evaluates
upload security so that when the post is loaded again after processing,
all of the uploads have the correct security.
Why this change?
Back in May 17 2023 along with the release of Discourse 3.1, we announced
on meta that the legacy hamburger dropdown navigation menu is
deprecated and will be dropped in Discourse 3.2. This is the link to the announcement
on meta: https://meta.discourse.org/t/removing-the-legacy-hamburger-navigation-menu-option/265274
## What does this change do?
This change removes the `legacy` option from the `navigation_menu` site
setting and migrates existing sites on the `legacy` option to the
`header dropdown` option.
All references to the `legacy` option in code and tests have been
removed as well.
This is part 1 of 3, split up of PR #23529. This PR refactors the
webauthn code to support passkey authentication/registration.
Passkeys aren't used yet, that is coming in PRs 2 and 3.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Some sites have a large number of categories and fetching the category
IDs or category topic IDs just to build another query can take a long
time or resources (i.e. memory).
Meta topic: https://meta.discourse.org/t/suppress-these-tags-from-summary-emails-settings-is-not-working-in-preview-digest-email/279196?u=osama
Follow-up to 477a5dd371
The `digest_suppress_tags` setting is designed to be a list of pipe-delimited tag names, but the tag-based topic suppression logic assumes (incorrectly) that the setting contains pipe-delimited tag IDs. This mismatch in expectations led to the setting not working as expected.
This PR adds a step that converts the list of tag names in the setting to their corresponding IDs, which is then used to suppress topics tagged with those specific tags.
This commit adds limits to themes and theme components on the:
- file size of about.json and .discourse-compatibility
- file size of theme assets
- number of files in a theme
The hidden site setting max_drafts_per_user defaults to 10_000 drafts per user.
The longest key should be "topic_<MAX_BIG_INT>" which is 25 characters.
In #20135 we prevented invalid inputs from being accepted in category setting form fields on the front-end. We didn't do anything on the back-end at that time, because we were still discussing which path we wanted to take. Eventually we decided we want to move this to a new CategorySetting model.
This PR moves the require_topic_approval and require_reply_approval from custom fields to the new CategorySetting model.
This PR is nearly identical to #20580, which migrated num_auto_bump_daily, but since these are slightly more sensitive, they are moved after the previous one is verified.
Why this change?
Currently, we do not have an easy way to test themes and theme components
using Rails system tests. While we support QUnit acceptance tests for
themes and theme components, QUnit acceptance tests stubs out the server
and setting up the fixtures for server responses is difficult and can lead to a
frustrating experience. System tests on the other hand allow authors to
set up the test fixtures using our fabricator system which is much
easier to use.
What does this change do?
In order for us to allow authors to run system tests with their themes
installed, we are adding a `upload_theme` helper that is made available
when writing system tests. The `upload_theme` helper requires a single
`directory` parameter where `directory` is the directory of the theme
locally and returns a `Theme` record.
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
They're both constant per-instance values, there is no need to store them
in the session. This also makes the code a bit more readable by moving
the `session_challenge_key` method up to the `DiscourseWebauthn` module.
Follow-up to #23199 in which we moved the "delete user" options under the relevant action menu for flagged post. This change does the same, but to queued posts.
As per discussion, we want to move the options to delete the user under the "Yes" menu of the review queue, since these options are often the most recommended, but also frequently missed because they are tucked away under their own menu.
In addition to the move, I removed the title case of the options so that it matches the other options in the "Yes" menu.
Reverts e2705df and re-lands #23187 and #23219.
The issue was incorrect order of execution of Rails' `assets:precompile` task in our own precompilation stack.
Co-authored-by: David Taylor <david@taylorhq.com>
Manipulating theme module paths means that the paths you author are not the ones used at runtime. This can lead to some very unexpected behavior and potential module name clashes. It also meant that the refactor in 16c6ab8661 was unable to correctly match up theme connector js/templates.
While this could technically be a breaking change, I think it is reasonably safe because:
1. Themes are already forced to use relative paths when referencing their own modules (since they're namespaced based on the site-specific id). The only time this might be problematic is when theme tests reference modules in the theme's main `javascripts` directory
2. For things like components/services/controllers/etc. our custom Ember resolver works backwards from the end of the path, so adding `discourse/` in the middle will not affect resolution.
This is a bug that happens only when the current date is less than 90 days from a date on which the time zone transitions into or out of Daylight Savings Time.
In these conditions, bulk invites show the time of day of their expiration as being 1 hour later than the current time.
Whereas it should match the time of day the invite was generated.
This is because the server has not been using the user's timezone in calculating the expiration time of day. This PR fixes issue by considering the user's timezone when doing the date math.
https://meta.discourse.org/t/bulk-invite-logic-to-generate-expire-date-bug/274689
`ReviewableQueuedPost` got refactored a while back to use the more
appropriate `target_created_by` for the user of the post being queued
instead of `created_by`. The change was not extended to the `DELETE
/review/:id` endpoint leading to error responses for a user attempting
to deleting their own queued post.
This fix extends the `Reviewable` lookup implementation in
`ReviewablesController#destroy` and Guardian implementation to account
for this change.
Previously we were discovering plugin outlets by checking first for dedicated template files, and then looking for classes to match them. This doesn't work for components which are entirely defined in JS (e.g. those authored with gjs, or those which are re-exports of a colocated component).
This commit refactors our detection logic to look for both class and template modules in a single pass. It also refactors things so that the modules themselves are required lazily when needd, rather than all being loaded during app boot.
When hiding a post (essentially updating hidden, hidden_at, and hidden_reason_id) our callbacks are running the whole battery of post validations. This can cause the hiding to fail in a number of edge cases. The issue is similar to the one fixed in #11680, but applies to all post validations, none of which should apply when hiding a post.
After some code reading and discussion, none of the validations in PostValidator seem to be relevant when hiding posts, so instead of just skipping unique check, we skip all post validator checks.
* scrub non-a html tags from tag descriptions on create, strips all tags from tag description when displayed in tag hover
* test for tag description links
* UX: basic render-tag test
* UX: fix linting
* UX: fix linting
* fix broken tests
* Update spec/models/tag_spec.rb
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
* UX: use has_sanitizable_fields instead of has_scrubbable_fields to ensafen tag.description
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Currently when we decide we're going to drop a column in the future we just mark it with a TODO comment and add it to ignored_columns. This makes it instantly unavailable, and we mostly forget about the TODO in the end. 😬
This change adds a HasDeprecatedColumns concern which offers a little bit more flexibility. We can still simulate the old behaviour by setting drop_from to the current version, but we can also set it to a future version, causing it to raise a deprecation warning until then if used.
This commit removes any logic in the app and in specs around
enable_experimental_hashtag_autocomplete and deletes some
old category hashtag code that is no longer necessary.
It also adds a `slug_ref` category instance method, which
will generate a reference like `parent:child` for a category,
with an optional depth, which hashtags use. Also refactors
PostRevisor which was using CategoryHashtagDataSource directly
which is a no-no.
Deletes the old hashtag markdown rule as well.
This brings the theme development experience (via the discourse_theme cli) closer to the experience of making javascript changes in Discourse core/plugins via Ember CLI. Whenever a change is made to a non-css theme field, all clients will be instructed to immediately refresh via message-bus.
In #20135 we prevented invalid inputs from being accepted in category setting form fields on the front-end. We didn't do anything on the back-end at that time, because we were still discussing which path we wanted to take. Eventually we decided we want to move this to a new CategorySetting model.
This PR moves the num_auto_bump_daily from custom fields to the new CategorySetting model.
In addition it sets the default value to 0, which exhibits the same behaviour as when the value is NULL.
* FIX Add 'Ignored' flags to Moderator Activity report
The Moderator Activity query didn’t include the number of deferred flags in the Flags Reviewed totals. As this number is designed to reflect how many flags a moderator has seen, reviewed, and made a judgement on, the Ignored ones should also be included.
* Apply suggestions from code review
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
FEATURE: Only approved flags for post counters
* Why was this change necessary?
The counters for flagged posts in the user's profile and user index from
the admin view include flags that were rejected, ignored or pending
review. This introduces unnecessary noise. Also the flagged posts
counter in the user's profile includes custom flags which add further
noise to this signal.
* How does it address the problem?
* Modifying User#flags_received_count to return posts with only approved
standard flags
* Refactoring User#number_of_flagged_posts to alias to
User#flags_received_count
* Updating the flagged post staff counter hyperlink to navigate to a
filtered view of that user's approved flagged posts to maintain
consistency with the counter
* Adding system tests for the profile page to cover the flagged posts
staff counter
In the query generated by `TopicTrackingState.report`, there are two
subqueies being executed. The first subquery fetches all the topics
that are new for a given user while the second subquery fetches all the topics with
unread posts for a given user. For the second subquery, there is a
filter `topics.updated_at >= user_stats.first_unread_at` which is used
as a performance optimisation to reduce the number of rows that PG has
to scan through the `topics` table.
However, we started to notice in production that the PG planner doesn't
always execute the filter first to reduce the number of rows that it has
to scan through. Running the following query in one of our production
instance,
```
EXPLAIN ANALYZE
SELECT
DISTINCT topics.id as topic_id,
u.id as user_id,
topics.created_at,
topics.updated_at,
topics.highest_staff_post_number AS highest_post_number,
last_read_post_number,
c.id as category_id,
c.topic_id AS category_topic_id,
tu.notification_level,
us.first_unread_at,
GREATEST(
CASE
WHEN COALESCE(uo.new_topic_duration_minutes, 2880) = -1 THEN u.created_at
WHEN COALESCE(uo.new_topic_duration_minutes, 2880) = -2 THEN COALESCE(
u.previous_visit_at,u.created_at
)
ELSE ('2023-07-31 03:29:45.737630'::timestamp - INTERVAL '1 MINUTE' * COALESCE(uo.new_topic_duration_minutes, 2880))
END, u.created_at, '2023-07-25 15:06:44'
) AS treat_as_new_topic_start_date
FROM topics
JOIN users u on u.id = 13455
JOIN user_stats AS us ON us.user_id = u.id
JOIN user_options AS uo ON uo.user_id = u.id
JOIN categories c ON c.id = topics.category_id
LEFT JOIN topic_users tu ON tu.topic_id = topics.id AND tu.user_id = u.id
WHERE u.id = 13455 AND
topics.updated_at >= us.first_unread_at AND
topics.archetype <> 'private_message' AND
(("topics"."deleted_at" IS NULL AND (tu.last_read_post_number < topics.highest_staff_post_number) AND (COALESCE(tu.notification_level, 1) >= 2)) OR (1=0)) AND
NOT (
COALESCE((select array_agg(tag_id) from topic_tags where topic_tags.topic_id = topics.id), ARRAY[]::int[]) && ARRAY[451,452,453]
) AND
topics.deleted_at IS NULL AND
NOT (
last_read_post_number IS NULL AND
(
topics.category_id IN (SELECT "categories"."id" FROM "categories" LEFT JOIN categories categories2 ON categories2.id = categories.parent_category_id LEFT JOIN category_users ON category_users.category_id = categories.id AND category_users.user_id = 13455 LEFT JOIN category_users category_users2 ON category_users2.category_id = categories2.id AND category_users2.user_id = 13455 WHERE ((category_users.id IS NULL AND COALESCE(category_users2.notification_level, 1) = 0) OR COALESCE(category_users.notification_level, 1) = 0))
AND tu.notification_level <= 1
)
)
```
we get the following
```
QUERY PLAN
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Unique (cost=201606.06..201608.15 rows=76 width=60) (actual time=91.279..91.294 rows=14 loops=1)
-> Sort (cost=201606.06..201606.25 rows=76 width=60) (actual time=91.278..91.284 rows=14 loops=1)
Sort Key: topics.id, topics.created_at, topics.updated_at, topics.highest_staff_post_number, tu.last_read_post_number, c.id, c.topic_id, tu.notification_level, us.first_unread_at, (GREATEST(CASE WHEN (COALESCE(uo.new_topic_duration_minutes, 2880) = '-1'::integer) THEN u.created_at WHEN (COALESCE(uo.new_topic_duration_minutes, 2880) = '-2'::integer) THEN COALESCE(u.previous_visit_at, u.created_at) ELSE ('2023-07-31 03:29:45.73763'::timestamp without time zone - ('00:01:00'::interval * (COALESCE(uo.new_topic_duration_minutes, 2880))::double precision)) END, u.created_at, '2023-07-25 15:06:44'::timestamp without time zone))
Sort Method: quicksort Memory: 26kB
-> Hash Join (cost=97519.51..201603.69 rows=76 width=60) (actual time=87.662..91.268 rows=14 loops=1)
Hash Cond: (topics.id = tu.topic_id)
Join Filter: ((tu.last_read_post_number < topics.highest_staff_post_number) AND ((tu.last_read_post_number IS NOT NULL) OR (NOT (hashed SubPlan 2)) OR (tu.notification_level > 1)))
Rows Removed by Join Filter: 10
-> Nested Loop (cost=1.54..104075.36 rows=3511 width=68) (actual time=0.055..3.609 rows=548 loops=1)
-> Nested Loop (cost=1.13..25.20 rows=1 width=32) (actual time=0.027..0.033 rows=1 loops=1)
-> Nested Loop (cost=0.71..16.76 rows=1 width=28) (actual time=0.020..0.023 rows=1 loops=1)
-> Index Scan using users_pkey on users u (cost=0.42..8.44 rows=1 width=20) (actual time=0.010..0.012 rows=1 loops=1)
Index Cond: (id = 13455)
-> Index Scan using user_stats_pkey on user_stats us (cost=0.29..8.31 rows=1 width=12) (actual time=0.008..0.010 rows=1 loops=1)
Index Cond: (user_id = 13455)
-> Index Scan using index_user_options_on_user_id_and_default_calendar on user_options uo (cost=0.42..8.44 rows=1 width=8) (actual time=0.007..0.008 rows=1 loops=1)
Index Cond: (user_id = 13455)
-> Nested Loop (cost=0.41..104015.12 rows=3504 width=36) (actual time=0.026..3.503 rows=548 loops=1)
-> Seq Scan on categories c (cost=0.00..13.73 rows=73 width=8) (actual time=0.003..0.039 rows=73 loops=1)
-> Index Only Scan using index_topics_on_updated_at_public on topics (cost=0.41..1424.20 rows=48 width=28) (actual time=0.012..0.046 rows=8 loops=73)
Index Cond: ((updated_at >= us.first_unread_at) AND (category_id = c.id))
Filter: (NOT (COALESCE((SubPlan 1), '{}'::integer[]) && '{451,452,453}'::integer[]))
Heap Fetches: 553
SubPlan 1
-> Aggregate (cost=4.31..4.32 rows=1 width=32) (actual time=0.002..0.002 rows=1 loops=548)
-> Index Only Scan using index_topic_tags_on_topic_id_and_tag_id on topic_tags (cost=0.29..4.31 rows=1 width=4) (actual time=0.002..0.002 rows=1 loops=548)
Index Cond: (topic_id = topics.id)
Heap Fetches: 178
-> Hash (cost=97222.14..97222.14 rows=19914 width=16) (actual time=87.545..87.546 rows=42884 loops=1)
Buckets: 65536 (originally 32768) Batches: 1 (originally 1) Memory Usage: 2387kB
-> Bitmap Heap Scan on topic_users tu (cost=1217.47..97222.14 rows=19914 width=16) (actual time=14.419..78.286 rows=42884 loops=1)
Recheck Cond: (user_id = 13455)
Filter: (COALESCE(notification_level, 1) >= 2)
Rows Removed by Filter: 15839
Heap Blocks: exact=45285
-> Bitmap Index Scan on index_topic_users_on_user_id_and_topic_id (cost=0.00..1212.49 rows=59741 width=0) (actual time=6.448..6.448 rows=58723 loops=1)
Index Cond: (user_id = 13455)
SubPlan 2
-> Nested Loop Left Join (cost=0.74..46.90 rows=1 width=4) (never executed)
Join Filter: (category_users2.category_id = categories2.id)
Filter: (((category_users.id IS NULL) AND (COALESCE(category_users2.notification_level, 1) = 0)) OR (COALESCE(category_users.notification_level, 1) = 0))
-> Nested Loop Left Join (cost=0.45..32.31 rows=73 width=16) (never executed)
Join Filter: (category_users.category_id = categories.id)
-> Nested Loop Left Join (cost=0.15..18.45 rows=73 width=8) (never executed)
-> Seq Scan on categories (cost=0.00..13.73 rows=73 width=8) (never executed)
-> Memoize (cost=0.15..0.28 rows=1 width=4) (never executed)
Cache Key: categories.parent_category_id
Cache Mode: logical
-> Index Only Scan using categories_pkey on categories categories2 (cost=0.14..0.27 rows=1 width=4) (never executed)
Index Cond: (id = categories.parent_category_id)
Heap Fetches: 0
-> Materialize (cost=0.29..11.69 rows=2 width=12) (never executed)
-> Index Scan using idx_category_users_user_id_category_id on category_users (cost=0.29..11.68 rows=2 width=12) (never executed)
Index Cond: (user_id = 13455)
-> Materialize (cost=0.29..11.69 rows=2 width=8) (never executed)
-> Index Scan using idx_category_users_user_id_category_id on category_users category_users2 (cost=0.29..11.68 rows=2 width=8) (never executed)
Index Cond: (user_id = 13455)
Planning Time: 1.740 ms
Execution Time: 91.414 ms
(59 rows)
```
From the execution plan, we can see the most of the time is spent
joining about 42888 rows in the `topics` table to the `topic_users` table.
However, we know that we only have to scan through a
subset of the `topics` table because the user's last unread at is '2023-07-20 11:33:05'.
If we filter the `topics` table with `topics.updated_at >= '2023-07-20 11:33:05'`, this would only
return about 1500 rows.
From our testing in production, the PG planner is able to execute a
better query plan when we avoid the unnecessary joins on `user_stats` just to be
able to get the user's `UserStat#first_unread_at`. Instead, we can just
pass the value of `UserStat#first_unread_at` directly as a query
parameter.
```
EXPLAIN ANALYZE
SELECT
DISTINCT topics.id as topic_id,
u.id as user_id,
topics.created_at,
topics.updated_at,
topics.highest_staff_post_number AS highest_post_number,
last_read_post_number,
c.id as category_id,
c.topic_id AS category_topic_id,
tu.notification_level,
GREATEST(
CASE
WHEN COALESCE(uo.new_topic_duration_minutes, 2880) = -1 THEN u.created_at
WHEN COALESCE(uo.new_topic_duration_minutes, 2880) = -2 THEN COALESCE(
u.previous_visit_at,u.created_at
)
ELSE ('2023-07-31 03:29:45.737630'::timestamp - INTERVAL '1 MINUTE' * COALESCE(uo.new_topic_duration_minutes, 2880))
END, u.created_at, '2023-07-25 15:06:44'
) AS treat_as_new_topic_start_date
FROM topics
JOIN users u on u.id = 13455
JOIN user_options AS uo ON uo.user_id = u.id
JOIN categories c ON c.id = topics.category_id
LEFT JOIN topic_users tu ON tu.topic_id = topics.id AND tu.user_id = u.id
WHERE u.id = 13455 AND
topics.updated_at >= '2023-07-20 11:33:05' AND
topics.archetype <> 'private_message' AND
(("topics"."deleted_at" IS NULL AND (tu.last_read_post_number < topics.highest_staff_post_number) AND (COALESCE(tu.notification_level, 1) >= 2)) OR (1=0)) AND
NOT (
COALESCE((select array_agg(tag_id) from topic_tags where topic_tags.topic_id = topics.id), ARRAY[]::int[]) && ARRAY[451,452,453]
) AND
topics.deleted_at IS NULL AND
NOT (
last_read_post_number IS NULL AND
(
topics.category_id IN (SELECT "categories"."id" FROM "categories" LEFT JOIN categories categories2 ON categories2.id = categories.parent_category_id LEFT JOIN category_users ON category_users.category_id = categories.id AND category_users.user_id = 13455 LEFT JOIN category_users category_users2 ON category_users2.category_id = categories2.id AND category_users2.user_id = 13455 WHERE ((category_users.id IS NULL AND COALESCE(category_users2.notification_level, 1) = 0) OR COALESCE(category_users.notification_level, 1) = 0))
AND tu.notification_level <= 1
)
);
```
Note how the filter is now `topics.updated_at >= '2023-07-20 11:33:05'`
instead of `topics.updated_at >= us.first_unread_at`. The modified query
above generates the following execution plan.
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Unique (cost=5189.86..5189.88 rows=1 width=52) (actual time=4.991..5.002 rows=14 loops=1)
-> Sort (cost=5189.86..5189.86 rows=1 width=52) (actual time=4.990..4.994 rows=14 loops=1)
Sort Key: topics.id, topics.created_at, topics.updated_at, topics.highest_staff_post_number, tu.last_read_post_number, c.id, c.topic_id, tu.notification_level, (GREATEST(CASE WHEN (COALESCE(uo.new_topic_duration_minutes, 2880) = '-1'::integer) THEN u.created_at WHEN (COALESCE(uo.new_topic_duration_minutes, 2880) = '-2'::integer) THEN COALESCE(u.previous_visit_at, u.created_at) ELSE ('2023-07-31 03:29:45.73763'::timestamp without time zone - ('00:01:00'::interval * (COALESCE(uo.new_topic_duration_minutes, 2880))::double precision)) END, u.created_at, '2023-07-25 15:06:44'::timestamp without time zone))
Sort Method: quicksort Memory: 26kB
-> Nested Loop (cost=52.11..5189.85 rows=1 width=52) (actual time=0.093..4.974 rows=14 loops=1)
-> Nested Loop (cost=51.70..5181.39 rows=1 width=60) (actual time=0.084..4.931 rows=14 loops=1)
-> Nested Loop (cost=51.28..5172.94 rows=1 width=44) (actual time=0.076..4.887 rows=14 loops=1)
-> Nested Loop (cost=0.41..1698.46 rows=59 width=36) (actual time=0.029..3.537 rows=548 loops=1)
-> Seq Scan on categories c (cost=0.00..13.73 rows=73 width=8) (actual time=0.005..0.039 rows=73 loops=1)
-> Index Only Scan using index_topics_on_updated_at_public on topics (cost=0.41..23.07 rows=1 width=28) (actual time=0.012..0.047 rows=8 loops=73)
Index Cond: ((updated_at >= '2023-07-20 11:33:05'::timestamp without time zone) AND (category_id = c.id))
Filter: (NOT (COALESCE((SubPlan 1), '{}'::integer[]) && '{451,452,453}'::integer[]))
Heap Fetches: 552
SubPlan 1
-> Aggregate (cost=4.31..4.32 rows=1 width=32) (actual time=0.002..0.002 rows=1 loops=548)
-> Index Only Scan using index_topic_tags_on_topic_id_and_tag_id on topic_tags (cost=0.29..4.31 rows=1 width=4) (actual time=0.002..0.002 rows=1 loops=548)
Index Cond: (topic_id = topics.id)
Heap Fetches: 178
-> Index Scan using index_topic_users_on_user_id_and_topic_id on topic_users tu (cost=50.86..58.88 rows=1 width=16) (actual time=0.002..0.002 rows=0 loops=548)
Index Cond: ((user_id = 13455) AND (topic_id = topics.id))
Filter: ((COALESCE(notification_level, 1) >= 2) AND (last_read_post_number < topics.highest_staff_post_number) AND ((last_read_post_number IS NOT NULL) OR (NOT (hashed SubPlan 2)) OR (notification_level > 1)))
Rows Removed by Filter: 0
SubPlan 2
-> Nested Loop Left Join (cost=0.74..50.43 rows=1 width=4) (never executed)
Join Filter: (category_users2.category_id = categories2.id)
Filter: (((category_users.id IS NULL) AND (COALESCE(category_users2.notification_level, 1) = 0)) OR (COALESCE(category_users.notification_level, 1) = 0))
-> Nested Loop Left Join (cost=0.45..35.84 rows=73 width=16) (never executed)
Join Filter: (category_users.category_id = categories.id)
-> Nested Loop Left Join (cost=0.15..21.97 rows=73 width=8) (never executed)
-> Seq Scan on categories (cost=0.00..13.73 rows=73 width=8) (never executed)
-> Memoize (cost=0.15..0.61 rows=1 width=4) (never executed)
Cache Key: categories.parent_category_id
Cache Mode: logical
-> Index Only Scan using categories_pkey on categories categories2 (cost=0.14..0.60 rows=1 width=4) (never executed)
Index Cond: (id = categories.parent_category_id)
Heap Fetches: 0
-> Materialize (cost=0.29..11.69 rows=2 width=12) (never executed)
-> Index Scan using idx_category_users_user_id_category_id on category_users (cost=0.29..11.68 rows=2 width=12) (never executed)
Index Cond: (user_id = 13455)
-> Materialize (cost=0.29..11.69 rows=2 width=8) (never executed)
-> Index Scan using idx_category_users_user_id_category_id on category_users category_users2 (cost=0.29..11.68 rows=2 width=8) (never executed)
Index Cond: (user_id = 13455)
-> Index Scan using users_pkey on users u (cost=0.42..8.44 rows=1 width=20) (actual time=0.003..0.003 rows=1 loops=14)
Index Cond: (id = 13455)
-> Index Scan using index_user_options_on_user_id_and_default_calendar on user_options uo (cost=0.42..8.44 rows=1 width=8) (actual time=0.002..0.002 rows=1 loops=14)
Index Cond: (user_id = 13455)
Planning Time: 1.281 ms
Execution Time: 5.092 ms
(48 rows)
```
With the new query, PG first does an index scan using the `index_topics_on_updated_at_public` index to filter away most of the topics making the subsequent joins much cheaper. Total query time has been reduced from ~90ms to ~5ms.
This optimisation will mostly affect users with very few/recent unread topics since a large `UserStat#firsts_unread_at` value will still mean scanning through a large portion of the `topics` table.
We currently are accumulating orphaned upload references whenever drafts are deleted.
This change deals with future cases by adding a dependent strategy of delete_all on the Draft#upload_references association. (We don't really need destroy strategy here, since UploadReference is a simple data bag and there are no validations or callbacks on the model.)
It deals with existing cases through a migration that deletes all existing, orphaned draft upload references.
A previous change updated `ReviewableQueuedPost`'s `created_by`
to be consistent with other reviewable types. It assigns
the the creator of the post being queued to `target_created_by` and sets
the `created_by` to the creator of the reviewable itself.
This fix updates some of the `created_by` references missed during the
intial fix.
What is the problem here?
In multiple controllers, we are accepting a `limit` params but do not
impose any upper bound on the values being accepted. Without an upper
bound, we may be allowing arbituary users from generating DB queries
which may end up exhausing the resources on the server.
What is the fix here?
A new `fetch_limit_from_params` helper method is introduced in
`ApplicationController` that can be used by controller actions to safely
get the limit from the params as a default limit and maximum limit has
to be set. When an invalid limit params is encountered, the server will
respond with the 400 response code.
This is happening because despite the user already existing in the forum, the `SingleSignOnRecord` doesn't exist and "require_activation" is set on the provider, causing us to skip looking for the email, and resulting in us creating a new User then seeing Validation failed: Primary email has already been taken when DiscourseConnect is attempting to make a new account.
Why this change?
In `PostDestroyer#make_previous_post_the_last_one` and
`Topic.reset_highest`, we have a query that looks something like this:
```
SELECT user_id FROM posts
WHERE topic_id = :topic_id AND
deleted_at IS NULL AND
post_type <> 4
#{post_type}
ORDER BY created_at desc
LIMIT 1
```
However, we currently don't have an index that caters directly to this
query. As a result, we have seen this query performing poorly on large
sites if the PG planner ends up using an index that is suboptimal for
the query.
This commit adds an index to the `posts` table on `topic_id` and then
`created_at`. For the query above, PG will be able to do a backwards
index scan efficiently.
Context of this change:
There are two site settings which an admin can configured to set the
default categories and tags that are shown for a new user. `default_navigation_menu_categories`
is used to determine the default categories while
`default_navigation_menu_tags` is used to determine the default tags.
Prior to this change when seeding the defaults, we will filter out the
categories/tags that the user do not have permission to see. However,
this means that when the user does eventually gain permission down the
line, the default categories and tags do not appear.
What does this change do?
With this commit, we have changed it such that all the categories and tags
configured in the `default_navigation_menu_categories` and
`default_navigation_menu_tags` site settings are seeded regardless of
whether the user's visibility of the categories or tags. During
serialization, we will then filter out the categories and tags which the
user does not have visibility of.
These methods were deprecated and marked for removal in 2.6. This change deletes them.
These deprecations use raise_error: true, so the fallbacks are at this point unreachable and can't be used anyway.
Recently we started giving admins a notice in the advice panel when their translations have become outdated due to changes in core. However, we didn't include any additional information.
This PR adds more information about the outdated translation inside the site text edit page, together with an option to dismiss the warning.
Performing a `Delete User`/`Delete and Block User` reviewable actions for a
queued post reviewable from the `review.show` route results in an error
popup even if the action completes successfully.
This happens because unlike other reviewable types, a user delete action
on a queued post reviewable results in the deletion of the reviewable
itself. A subsequent attempt to reload the reviewable record results in
404. The deletion happens as part of the call to `UserDestroyer` which
includes a step for destroying reviewables created by the user being
destroyed. At the root of this is the creator of the queued post
being set as the creator of the reviewable as instead of the system
user.
This change assigns the creator of the reviewable to the system user and
uses the more approapriate `target_created_by` column for the creator of the
post being queued.
Adding a filter without a type parameter has been deprecated for the last three years, and was marked for removal in 2.9.0.
During this time we have had a few deprecation warnings in logs coming from Reports::Bookmarks.
The fallback was to set the type to the name of the filter. This change just passes the type (same as name) explicitly instead, and removes the deprecation fallback.
We have a number of raw comments indicating that certain methods and classes are deprecated and marked for removal. This change turn those comments into deprecation warnings so that we can 1) see them in the logs of our own hosting and 2) give some warning to self hosters.
Why this change?
The `legacy` navigation menu option for the `navigation_menu` site
setting will be removed shortly after the release of Discourse 3.1 in
the first beta release of Discourse 3.2. Therefore, we're adding an
admin dashboard warning to give sites on the `legacy` navigation menu a
heads up.
We recently introduced this advice to admins when some translation overrides are outdated or using unknown interpolation keys:
However we missed the case where the original translation key has been renamed or altogether removed. When this happens they are no longer visible in the admin interface, leading to the confusing situation where we say there are outdated translations, but none are shown.
Because we don't explicitly handle this case, some deleted translations were incorrectly marked as having unknown interpolation keys. (This is because I18n.t will return a string like "Translation missing: foo", which obviously has no interpolation keys inside.)
This change adds an additional status, deprecated for TranslationOverride, and the job that checks them will check for this status first, taking precedence over invalid_interpolation_keys. Since the advice only checks for the outdated and invalid_interpolation_keys statuses, this fixes the problem.
The attribute Reviewable#post_options was deprecated (and replaced by #payload) four years ago, and marked for deletion in 2.9.0. This commit removes it.
Why this change?
Prior to this change, dismissing unreads posts did not publish the
changes across clients for the same user. As a result, users can end up
seeing an unread count being present but saw no topics being loaded when
visiting the `/unread` route.
Simplified query based on SiteSettings to join only relevant user_options rows.
In addition, index was added to 'watched_precedence_over_muted` column in `user_options` table to speed up query
Instead of having to remember every time, just always wait until the
current transaction (if it exists) has committed before clearing any
DistributedCache.
The only exception to this is caches that aren't caching things from
postgres.
This means we have to do the test setup after setting the test
transaction, because doing the test setup involves clearing caches.
Reapplying this - it now doesn't use after_commit if skip_db is set
This PR adds a feature to help admins stay up-to-date with their translations. We already have protections preventing admins from problems when they update their overrides. This change adds some protection in the other direction (where translations change in core due to an upgrade) by creating a notice for admins when defaults have changed.
Terms:
- In the case where Discourse core changes the default translation, the translation override is considered "outdated".
- In the case above where interpolation keys were changed from the ones the override is using, it is considered "invalid".
- If none of the above applies, the override is considered "up to date".
How does it work?
There are a few pieces that makes this work:
- When an admin creates or updates a translation override, we store the original translation at the time of write. (This is used to detect changes later on.)
- There is a background job that runs once every day and checks for outdated and invalid overrides, and marks them as such.
- When there are any outdated or invalid overrides, a notice is shown in admin dashboard with a link to the text customization page.
Known limitations
The link from the dashboard links to the default locale text customization page. Given there might be invalid overrides in multiple languages, I'm not sure what we could do here. Consideration for future improvement.
Instead of having to remember every time, just always wait until the
current transaction (if it exists) has committed before clearing any
DistributedCache.
The only exception to this is caches that aren't caching things from
postgres.
This means we have to do the test setup after setting the test
transaction, because doing the test setup involves clearing caches.
Follow-up to b27e12445d
This commit adds 2 new site settings `default_sidebar_link_to_filtered_list` and `default_sidebar_show_count_of_new_items` to control the default values for the navigation menu preferences that were added in the linked commit (`sidebar_link_to_filtered_list` and `sidebar_show_count_of_new_items` respectively).
Recently, site setting watched_precedence_over_muted was introduced - https://github.com/discourse/discourse/pull/22252
In this PR, we are allowing users to override it. The option is only displayed when the user has watched categories and muted tags, or vice versa.
Recently, we added the option for watched tag/categories to take precedence over muted tag/categories. Therefore, `remove_muted_tags` is using `category_users` to check if categories are not watched. There was missing join in CategoryList which was causing an error.
This is the first of a number of PRs aimed at helping admins manage their translation overrides. It simply adds a list of available interpolation keys below the input field when editing an override.
It also includes custom interpolation key.
Why this change?
We are currently not fully satisfied with the current way to edit the
categories and tags that appears in the sidebar where the user is
redirected to the tracking preferences tab in the user's profile causing
the user to lose context of the current page. In addition, the dropdown
to select categories or tags limits the amount of information we can
display.
Since editing or adding a custom categories section is already using a
modal, we have decided to switch editing the categories and tags that
appear in the sidebar to use a modal as well.
This commit removes the `new_edit_sidebar_categories_tags_interface_groups` site setting and
make the modals the default for all users.
Updates the interface for implementing summarization strategies and adds a cache layer to summarize topics once.
The cache stores the final summary and each chunk used to build it, which will be useful when we have to extend or rebuild it.
While we are unable to support OAUTH2 with pop3 (due to upstream dependency ruby/net-pop#16), we are adding the support for mail pollers plugin. Doing so, it would be possible to write a plugin which then uses other ways (microsoft graph sdk for example) to poll emails from a mailbox.
The idea is that a plugin would define a class which inherits from Email::Poller and defines a poll_mailbox static method which returns an array of strings. Then the plugin could call register_mail_poller(<class_name>) to have it registered. All the configuration (oauth2 tokens, email, etc) could be managed by sitesettings defined in the plugin.
This change adds support retroactively updating display names in the new quote format when the user's name is changed. It happens through a background job that is triggered by a callback when a user is saved with a new name.
This PR splits up the preference that controls the count vs dot and destination of sidebar links, which is really hard to understand, into 2 simpler checkboxes:
The new preferences/checkboxes are off by default, but there are database migrations to switch the old preference to the new ones so that existing users don't have to update their preferences to keep their preferred behavior of sidebar links when this changed is rolled out.
Internal topic: t/103529.
Don't cache user_fields on users separately from custom_fields, since they can get out of sync.
---------
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
https://meta.discourse.org/t/markdown-preview-and-result-differ/263878
The result of this markdown had different results in the composer preview and the post. This is solved by updating Loofah to the latest version and using html5 fragments like our user had reported. While the change was only needed in cooked_post_processor.rb for this fix, other areas also had to be updated due to various side effects.
# Top level view
This PR is the first version of converting the search menu and its logic from (deprecated) widgets to glimmer components. The changes are hidden behind a group based feature flag. This will give us the ability to test the new implementation in a production setting before fully committing to the new search menu.
# What has changed
The majority of the logic from the widget implementation has been updated to fit within the context of a glimmer component, but it has not fundamentally changed. Instead of having a single widget - [search-menu.js](https://github.com/discourse/discourse/blob/main/app/assets/javascripts/discourse/app/widgets/search-menu.js) - that built the bulk of the search menu logic, we split the logic into (20+) bite size components. This greatly increases the readability and makes extending a component in the search menu much more straightforward.
That being said, certain pieces needed to be rewritten from scratch as they did not translate from widget -> glimmer, or there was a general code upgraded needed. There are a few of these changes worth noting:
### Search Service
**Search Term** -> In the widget implementation we had a overly complex way of managing the current search term. We tracked the search term across multiple different states (`term`, `opts.term`, `searchData.term`) causing headaches. This PR introduces a single source of truth:
```js
this.search.activeGlobalSearchTerm
```
This tracked value is available anywhere the `search` service is injected. In the case the search term should be needs to be updated you can call
```js
this.search.activeGlobalSearchTerm = "foo"
```
**event listeners** -> In the widget implementation we defined event listeners **only** on the search input to handle things such as
- keyboard navigation / shortcuts
- closing the search menu
- performing a search with "enter"
Having this in one place caused a lot of bloat in our logic as we had to handle multiple different cases in one location. Do _x_ if it is this element, but do _y_ if it is another. This PR updates the event listeners to be attached to individual components, allowing for a more fine tuned set of actions per element. To not duplicate logic across multiple components, we have condensed shared logic to actions on the search service to be reused. For example - `this.search.handleArrowUpOrDown` - to handle keyboard navigation.
### Search Context
We have unique logic based on the current search context (topic / tag / category / user / etc). This context is set within a models route file. We have updated the search service with a tracked value `searchContext` that can be utilized and updated from any component where the search service is injected.
```js
# before
this.searchService.set("searchContext", user.searchContext);
# after
this.searchService.searchContext = user.searchContext;
```
# Views
<img width="434" alt="Screenshot 2023-06-15 at 11 01 01 AM" src="https://github.com/discourse/discourse/assets/50783505/ef57e8e6-4e7b-4ba0-a770-8f2ed6310569">
<img width="418" alt="Screenshot 2023-06-15 at 11 04 11 AM" src="https://github.com/discourse/discourse/assets/50783505/2c1e0b38-d12c-4339-a1d5-04f0c1932b08">
<img width="413" alt="Screenshot 2023-06-15 at 11 04 34 AM" src="https://github.com/discourse/discourse/assets/50783505/b871d164-88cb-405e-9b78-d326a6f63686">
<img width="419" alt="Screenshot 2023-06-15 at 11 07 51 AM" src="https://github.com/discourse/discourse/assets/50783505/c7309a19-f541-47f4-94ef-10fa65658d8c">
<img width="424" alt="Screenshot 2023-06-15 at 11 04 48 AM" src="https://github.com/discourse/discourse/assets/50783505/f3dba06e-b029-431c-b3d0-36727b9e6dce">
<img width="415" alt="Screenshot 2023-06-15 at 11 08 57 AM" src="https://github.com/discourse/discourse/assets/50783505/ad4e7250-040c-4d06-bf06-99652f4c7b7c">
Communities can use sidebar or header dropdown, therefore navigation menu is a better name settings in 2 places:
- Old user sidebar preferences;
- Site setting about default tags and categories.
Currently, groups owned by moderators are not visible to them on the
groups page. This happens because, the group visibility queries don't
account for non-admin staff user group ownership.
This change updates the group visibility scope queries to account for a
moderator(non-admin staff user) group ownership.
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
This patch sets some limits on custom fields:
- an entity can’t have more than 100 custom fields defined on it
- a custom field can’t hold a value greater than 10,000,000 characters
The current implementation of custom fields is relatively complex and
does an upsert in SQL at some point, thus preventing to simply add an
`ActiveRecord` validation on the custom field model without having to
rewrite a part of the existing logic.
That’s one of the reasons this patch is implementing validations in the
`HasCustomField` module adding them to the model including the module.
* DEV: Implement staff logs for user columns edits
* deleted extra space in staff logger detail string, deleted string when no changes are made, added basic test coverage for EditDirectoryColumnsController
* fixed change made to #self.staff_actions un UserHistory
* implemented a method that builds the details, previous_values and new_values in a dynamic way
* removed details of changes
* refactored small merge
What this change?
We are currently not fully satisfied with the current way to edit the
categories and tags that appears in the sidebar where the user is
redirected to the tracking preferences tab in the user's profile causing
the user to lose context of the current page. In addition, the dropdown
to select categories or tags limits the amount of information we can
display.
Since editing or adding a custom categories section is already using a
modal, we have decided to switch editing the categories and tags that
appear in the sidebar to use a modal as well.
This commit ships a first pass of the edit categories modal such that we
can keep the commit small and reviewable. The incomplete nature of the
feature is also reflected in the fact that the feature is hidden behind
a new `new_edit_sidebar_categories_tags_interface_groups` site setting.
* FEATURE: reduce avatar sizes to 6 from 20
This PR introduces 3 changes:
1. SiteSetting.avatar_sizes, now does what is says on the tin.
previously it would introduce a large number of extra sizes, to allow for
various DPIs. Instead we now trust the admin with the size list.
2. When `avatar_sizes` changes, we ensure consistency and remove resized
avatars that are not longer allowed per site setting. This happens on the
12 hourly job and limited out of the box to 20k cleanups per cycle, given
this may reach out to AWS 20k times to remove things.
3.Our default avatar sizes are now "24|48|72|96|144|288" these sizes were
very specifically picked to limit amount of bluriness introduced by webkit.
Our avatars are already blurry due to 1px border, so this corrects old blur.
This change heavily reduces storage required by forums which simplifies
site moves and more.
Co-authored-by: David Taylor <david@taylorhq.com>
This commit adds modifiers that allow plugins to change how categories and groups are prefetched into the application and listed in the respective controllers.
Possible use cases:
- prevent some categories/groups from being prefetched when the application loads for performance reasons.
- prevent some categories/groups from being listed in their respective index pages.
When a user chooses to move a topic/message to an existing topic/message, they can now opt to merge the posts chronologically (using a checkbox in the UI).
What is this change required?
I noticed that actions in `SidebarSectionsController` resulted in
lots of N+1 queries problem and I wanted a solution to
prevent such problems without having to write N+1 queries tests. I have
also used strict loading for `SidebarSection` queries in performance
sensitive spots.
Note that in this commit, I have also set `config.active_record.action_on_strict_loading_violation = :log`
for the production environment so that we have more visibility of
potential N+1 queries problem in the logs. In development and test
environment, we're sticking with the default of raising an error.
What is the problem?
In the test environement, we were calling `SiteSetting.setting` directly
to introduce new site settings. However, this leads to changes in state of the SiteSettings
hash that is stored in memory as test runs. Changing or leaking states
when running tests is one of the major contributors of test flakiness.
An example of how this resulted in test flakiness is our `spec/integrity/i18n_spec.rb` spec file which
had a test case that would fail because a new "plugin_setting" site
setting was registered in another test case but the site setting did not
have translations for the site setting set.
What is the fix?
There are a couple of changes being introduced in this commit:
1. Make `SiteSetting.setting` a private method as it is not safe to be
exposed as a public method of the `SiteSetting` class
2. Change test cases to use existing site settings in Discourse instead
of creating custom site settings. Existing site settings are not
removed often so we don't really need to dynamically add new site
settings in test cases. Even if the site settings being used in test
cases are removed, updating the test cases to rely on other site
settings is a very easy change.
3. Set up a plugin instance in the test environment as a "fixture"
instead of having each test create its own plugin instance.
This patch is a followup of
https://github.com/discourse/discourse/pull/21504 where limits on custom
message for an invite were introduced.
This had a side effect of making some existing invites invalid and with
the current code, they can’t be invalidated anymore.
This patch takes the approach of skipping the validations when invites
are invalidated since the important thing here is to mark the invite as
invalidated regardless of its actual state in the DB. (no other
attributes are updated at the same time anyway)
* FIX: Video thumbnails can have duplicates
It's possible that a duplicate video or even a very similar video could
generate the same video thumbnail. Because video thumbnails are mapped
to their corresponding video by using the video sha1 in the thumbnail
filename we need to allow for duplicate thumbnails otherwise even when a
thumbnail has been generated for a topic it will not be mapped
correctly.
This will also allow you to re-upload a video on the same topic to
regenerate the thumbnail.
* fix typo
The welcome topic user tip was for admins only, but in general, user
tips should be used for guiding new users through the features that
Discourse offers. For this reason, we decided to remove the user tip.
This commit also includes a few more copy tweaks to the welcome topic.
The old method updated only existing records, without considering that
new tags might have been created or some tags might not exist anymore.
This was usually not a problem because the stats were also updated by
other code paths.
However, the ensure consistency job should be more solid and help when
other code paths fail or after importing data.
Also, update category tag stats too should happen when updating other
category stats as well.
### What is this change?
The lounge category was replaced with the general category in https://github.com/discourse/discourse/pull/18097.
However, there are still a few references to the lounge category in code. In particular, `Category#seeded?` is erroring out in production looking for `SiteSetting.lounge_category_id`.
In #21498, we split `BaseStore#download` into a "safe" version which returns nil on errors, and an "unsafe" version which raises an exception, which was the old behaviour of `#download`.
This change updates call sites that used the old `#download`, which raised exceptions, to use the new `#download!` to preserve behaviour (and silence deprecation warnings.)
It also silences the deprecation warning in tests.
