When returning the customRenderFn from within buildCustomMarkdownCookFunction
for custom markdown engines (such as the one used by the [chat] transcripts)
we were not hoisting/unhoisting the `html_raw` tokens created by the
transcript, which meant that opts.discourse.hoisted could end up in
a state where it was null, and which caused errors and general unpleasantness.
Instead, we can just call the `cook` function that is already exported
from discourse-markdown-it, that takes care of what we did previously
plus the hoisting.
There is a companion chat commit that adds tests for this, there are
no custom markdown engine usages in core to test with.
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
This commit handles the edge case where a draft is lost with no warnings if the user edits the title (or category/tags) of a topic while they're replying.to the same topic. Repro steps are as follows:
1. Start replying to a topic and type enough to get a draft saved.
2. Scroll up to the topic title and click the pencil icon next to the topic title, change the title, category and/or tags, and then save the changes.
3. Reload the page and you'll see that the draft is gone.
This happens because we only allow 1 draft per topic per user and when you edit the title of a topic that you're replying to, from the server perspective it'll look like as if you've submitted your reply so it will advance the draft sequence for the topic and delete the draft.
The fix in this commit makes `PostRevisor` skip advancing the draft sequence when a topic's title is edited using the pencil button next to the title.
Internal ticket: t60854.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Meta topic: https://meta.discourse.org/t/rtl-direction-is-broken-in-quotes/217639?u=osama.
Posts in Discourse are by default always rendered in the same direction as the rest of site, for example if the site is RTL, a post in that site is always rendered RTL even if it's made of an LTR language entirely. However, this behavior can be changed by enabling the `support mixed text direction` site setting which makes our posts rendering engine consider each "paragraph" in the post and apply an appropriate direction (using the `dir` attribute) on it based on its content/language.
I put paragraph in quotes because technically we only loop through the immediate children of the HTML element that contains the post cooked HTML and do this direction check on them. Most of the time the immediate children are actually paragraphs, but not always. The direction of an element is determined by checking its `textContent` property against a regular expression that checks all characters are RTL characters and based on the regular expression result the `dir` attribute is set on the element.
This technique doesn't work so well on quotes because they may contain multiple paragraphs which may be in different languages/directions. For example: if a site's language is Arabic (RTL language) and the `support mixed text direction` setting is enabled, regular paragraphs outside quotes are rendered as expected with the right direction depending on the paragraph's language. However, paragraphs within a quote are all (incorrectly) rendered in a single direction, LTR or RTL, regardless of whether they're of different languages/directions or not.
The reason for this is that when we're determining the direction for the quote, it's considered as one element and the direction is set on the whole quote. But for complex quotes that contain mixed paragraphs, we need to be more surgical and apply direction on individual paragraphs/elements within the quote.
This commit adds special handling for quotes to ensure that:
* the quote top bar (the avatar plus the chevron and arrow) always match the site direction
* each immediate paragraph (`<p>` elements) under `<blockquote>` in the quote gets a direction based on its content.
For before/after screenshots, see PR #16004.
This option will make it so the [quote] bbcode will always
include the HTML link to the quoted post, even if a topic_id
is not provided in the PrettyText#cook options. This is so
[quote] bbcode can be used in other places, like chat messages,
that always need the link and do not have an "off-topic" ID
to use.
The 'new' tab doesn't exist for anonymous users. Every 'new' topic also publishes a message on the `/latest` channel, so the blue banner at the top of the topic-list will still be functional
* DEV: remove duplicate code in button component template
* DEV: refactor is-loading state of d-button component
Before this change on initialisation `forceDisabled` is set `false` and then might change to `undefined` - depending on the use of the button component. This change ensures a boolean value for `forceDisabled`.
The added test works with and without the new change. The test is added as it represents the default use case for most buttons.
Previously we were publishing one messagebus message per user which was 'tracking' a topic. On large sites, this can easily be 1000+ messages. The important information in the message is common between all users, so we can manage with a single message on a shared channel, which will be much more efficient.
For user-specific values (notification_level and last_read_post_number), the JS app can infer values which are 'good enough'. Correct values will be loaded as soon as a topic-list containing the topic is visited.
This will only work under Ember CLI, and a small hack is required to make the Resolver work in development mode. In future, when we move to a more recent version of the Ember Resolver, this hack will not be required.
The use of a `/g` regex was causing some surprising, seemingly random, behavior. (https://stackoverflow.com/a/1520853/5913559)
There was also a known issue which would cause inconsistent class behavior when running the 'loading slider' theme component.
This commit takes the opportunity to refactor the component to remove the use of observers and remove the regex-based class parsing.
This commit moves _getMultilineContents and _applySurround into
TextareaTextManipulation, so other text area components using
that mixin can benefit from them (such as the chat composer).
It also creates a public function wrapper for many TextareaTextManipulation
functions that should not have underscore prefixes because they are
used outside the file. Will make follow-up PRs for each plugin/theme using
those functions then a final follow-up core PR to fix these up.
After leaving a group, it is trying to reload its member list. Previously, when the members_visibility_level attribute has a value of 2 or higher, it displayed an error popup since the can_see_members attribute was not updated.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
This was deprecated in Discourse 2.4, but no end version was put on the deprecation. Many plugins/themes are still using it. This commit restores it under ember-cli so that it does not block the Ember CLI rollout, and can be removed in a future commit.
To make this possible in development mode, the `sourceURL=` implementation needs to include something plugin-specific. This has no effect on production.
The asset version is bumped in order to trigger a re-compilation of plugin JS assets.
The old choose-topic component did not have the same style as the rest
of the create invite modal and was not very suitable to use in the modal
because it introduced the search results in modal's body.
The new topic-chooser is built using select-kit and provides a more
polished user experience.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
The chat quoting mechanism will need to be able to generate
markdown for all kinds of uploads. The UploadMarkdown class
was missing generation for video and audio uploads. This
commit adds that in, and also expands the server-side regex
recognition of FileHelper types to match those in uploads.js,
and adds a spec for UploadMarkdown
Another use case for focusComposer() is if the user is
already inside a topic but another component (such as the
floating chat window) needs to open the composer. This
commit also fixes the appendText option to only prepend
2 new lines if there is text before the text to be appended.
Follow up 7850ee318f
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
accept HTML attribute is not fully supported on iOS yet and can contain
only MIME types. This changes the input to allow all files and the
extension check is performed later in JavaScript.
Instead of relaying on /timings request, we should cache last read post number. That should protect from having incorrect unread counter when going back to topic list.
This additional cache is very temporary as once /timings request is finished, serializer will have a correct result.
Simplified flow is:
1. Store in cache information about last seen post number before /timings request is sent
2. When getting back to topic list compare value of last seen post number returned by /latest request and information in cache. If cache number is higher, than use it instead of information returned by /latest. In addition delete cache item as there is high chance that `/timings` request already finished.
3. Optionally, delete cache when timings request is done and topic list was not yet visited.
Keeping cache reasonably small should not affect performance.
TopicTrackingState should correctly set filterCategory and filterTag for all different configurations.
When filterTag exists and new_topic message arrives, it ensures that filterTag is included in payload tags
If filterTag is part of payload tags, message that new topics are available is displayed and after click, new topics are included in the list.
Allows to write custom code blocks:
```
```mermaid height=200,foo=bar
test
```
```
Which will then get converted to:
```
<pre data-code-wrap="mermaid" data-code-height="200" data-code-foo="bar">
<code class="lang-nohighlight">
test
</code>
</pre>
```
We need this in other places, this commit moves clipboardCopy
to the utilities.js lib. Had to remove use of Promise as well because
lib/utilities cannot import it, otherwise it will cause a mini racer error.
This commit adds a new helpful function to the composer controller
which can be used to focus the composer and insert text, regardless
of whether the consumer knows whether the composer is open or has
a draft. This is good for cases where an action needs to copy text
to the composer or open it with text after navigating to a URL.
The inspiration for this addition is the discourse-chat plugin,
which needs to be able to copy quoted markdown from the chat
and insert it into the composer, and unlike in the topic controller
we have no idea of the state of the composer from chat.
Under ember-cli, we rely on the `ember-export-application-global` addon to make `window.Discourse` available. This happens in an initializer. Previously this inititalizer would run after `auto-load-modules`, and so any widget/helper modules would not be able to access it. This commit sets some `after` parameters on the `auto-load-modules` and `inject-objects` initializers to ensure that `export-application-global` is run first.
This reverts commit f4c6a61855 and a8325c9016
This update of ember-auto-import and webpack causes significantly higher memory use during rebuilds. This made ember-cli totally unusable on 1GB RAM / 2GB swap environments. We don't have a specific need for this upgrade right now, so reverting for now.
In the commit d8bf2810ff we hoisted
the userOptionFields array to a module-level variable, but kept
the code inside save() the same. This causes an issue where if
save() is called twice on the same user with some array of user
option fields, the userOptionFields array is mutated, which means
the second save is likely not saving the fields intended.
This commit fixes the issue by not mutating the array. We cannot
change them into consts though, because we have an API to add more
items to the array.
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ember tests follows a convention where test files have a postfix of
`-test.js`. This ensures that any files in the tests folder which
follows this pattern is included.
When uploading an image, we change the uploading placeholder several times. Every time, we correct the position of the cursor after replacing. But we schedule repositioning of cursor to the afterRender queue in Ember Run Loop. As a result, sometimes we replace the placeholder several times but correct the cursor position only once at the end.
It just cannot work correctly with scheduling, we'll always be dealing with cumulative error. Removing scheduling fixes the problem.
Sadly, I cannot make the test work, I skipped it for now, going to give it another try later.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks
This commit adds a requestCustomMarkdownCookFunction function
to the `helper` that is provided to custom markdown rules
via their `setup` function.
The way this works is that once the default markdown engine that
we use for cooking posts has been set up, we loop through all
of the callbacks registered by `requestCustomMarkdownCookFunction`
and call `_buildCustomMarkdownCookFunction`. This creates
a new markdown engine using many of the same settings as the
default one, but will allow for the following options to be
changed by the markdown rule requesting the custom function:
* featuresOverride - The markdown-it features to allow for the engine
* markdownItRules - The markdown-it rules to allow for the engine
After this engine is set up a render function which renders + sanitizes
the output is returned for use by the markdown rule.
The use case for this API is mainly for block BBCode markdown rules
which want to render their content with a limited subset of the
markdown features/rules. Our initial use case for this is chat message
quoting.
This commit also does some minor refactoring of discourse-markdown-it
to accommodate this new engine building.
When changing to uppy for file uploads we forgot to add
these conditions to the paste event from 9c96511ec4
Basically, if you are pasting more than just a file (e.g. text,
html, rtf), then we should not handle the file and upload it, and
instead just paste in the text. This causes issues with spreadsheet
tools, that will copy the text representation and also an image
representation of cells to the user's clipboard.
This also moves the paste event for composer-upload-uppy to the
element found by the `editorClass` property, so it shares the paste
event with d-editor (via TextareaTextManipulation), which makes testing
this possible as the ember paste bindings are not picked up unless both
paste events are on the same element.
Adds up and down buttons next to the inputs of value lists when there is more than 1 item present. This helps to re-order the items in the value lists if necessary.
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
In our legacy environment, Ember RFC176 shims are included in `discourse-loader.js` which is part of the `vendor.js` bundle. This meant that the module shims were available as soon as the vendor.js asset was loaded.
Under Ember CLI, we were defining these shims in `discourse-boot.js`. This is loaded by the browser much later, and meant that the shims were not available to themes/plugins that call `require()` before Discourse has booted. This was causing errors under some circumstances.
This commit refactors the Ember CLI implementation so that the shims are included in the vendor.js bundle. This is done via an addon which leans on the ember-rfc176-data NPM package. This will ensure we have all the definitions, without the need for manual copy/paste.
In our legacy environment, Ember RFC176 shims are included in `discourse-loader.js` which is part of the `vendor.js` bundle. This meant that the module shims were available as soon as the vendor.js asset was loaded.
Under Ember CLI, we were defining these shims in `discourse-boot.js`. This is loaded by the browser much later, and meant that the shims were not available to themes/plugins that call `require()` before Discourse has booted. This was causing errors under some circumstances.
This commit refactors the Ember CLI implementation so that the shims are included in the vendor.js bundle. This is done via an addon which leans on the ember-rfc176-data NPM package. This will ensure we have all the definitions, without the need for manual copy/paste.
Previously, `resetSite()` would immediately generate a new `Site` instance, and run all the initialization logic within the model. This included initializing Category objects.
This was problematic because `resetSite()` is called before any initializers have been run. That means that any modifications to the Site or Category classes would not have any effect on the already-initialized Site/Category instances.
This commit makes two main changes so so that the test environment is more production-like:
1. Update `resetSite` so that it simply stores the new data in the PreloadStore, and destroys the old Site instance. Initialization of a new site instance happens 'just in time' (normally during the `inject-discourse-objects` initializer)
2. Update the `helperContext` in tests to use getters. This avoids the need to look up `Site.current()` before initializers have run
It also makes a minor adjustment to one test which was relying on a side-effect of the previous behavior.
This should resolve the failing tests for discourse-category-expert under Ember-CLI: https://github.com/discourse/discourse-category-experts/pull/69
This also switches to using the NPM package for better build stability. And adds a clearer label in the alert that is displayed to show your current timezone (when changing timezones).
* Some are no longer flaky or easily fixed
* Some are out of date or test things we can't do accurately (scroll
position) and are removed.
* Unwinds some uppy tests and makes sure all promises and runloops are
resolved.
Everything has been run in legacy/ember cli multiple times to ensure no
obvious suite regressions.
When the record is not saved, we should display a proper message.
One potential reason can be plugins for example discourse-calendar is specifying that only first post can contain event
This fixes rare cases of layout shift caused by images appearing slightly smaller after being loaded.
For example, a 371x1031 image is uploaded. It gets lightboxed, with the generated thumbnail of size 179x500. `height: auto` changes that thumbnail's size (only after being loaded) to 179x497, causing a 3px shift.
I did not observe any regressions with this change.
We don't need raw to decide if we can fast edit or not, we will fetch the raw later when we do the replacement, but this step can be done directly from innerHTML.
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
This reverts commit f43bba8d59.
Adding randomness has introduced a lot of flakiness in our ember-cli tests. We should fix those issues at the source. However, given the upcoming stable release, this randomness has been reverted so that the stable release includes a stable test suite. Having a stable test suite on stable will make backporting future commits much easier.
When staff visits the user profile of another user, the `email` field
in the model is empty. In this case, staff cannot send the reset email
password because nothing is passed in the `login` field.
This commit changes the behavior for staff users to allow resetting
password by username instead.
The topic ID portion of the topic URL is optional in Discourse as long as the topic slug is unique across the site. If you navigate to a topic without the ID in the URL, Discourse will redirect you to the canonical version of the URL that includes the ID.
However, we have a now regression where the client app doesn't correctly handle ID-less topic URLs displays an error message when the user clicks on such URL. The regression was introduced b537d591b3 when we switched from `DiscourseURL.routeTo` to using Ember's router to perform the redirecting to the canonical version of the URL, but the problem is that the canonical version comes from the server and it contains the hostname which the Ember router doesn't understand because it expects a relative URL.
This PR fixes the problem by constructing a relative URL that contains the topic slug and ID and passing that to the Ember route.
