This commit fixes the following scenario:
1. The user is searching for hashtags in chat, where the subcategory
type is not highest-ranked in priority order.
2. There can, but doesn't have to be, a higher-ranked matching chat
channel that has the same slug as the subcategory.
3. Since it is not the highest-ranked type, the subcategory, which
normally has a ref of parent:child, has its ref changed to
child::category, which does not work
This was happening because whenever a hashtag type was not highest
ranked, if _any_ other hashtag results conflicted slugs, we would
append the ::type suffix. Now, we only append this suffix if a
higher-ranked type conflicts with the hashtag, and we use the current ref
to build the new typed ref to preserve this parent:child format as well,
it's more accurate.
When user.last_seen was less than push_notification_time_window_mins we
where delaying the notification for the whole
push_notification_time_window_mins PLUS the time the user was away from.
Originally reported in https://meta.discourse.org/t/-/259688
During search indexing we "stuff" the index with additional keywords for
entities that look like domain names.
This allows searches for `cnn` to find URLs for `www.cnn.com`
The search stuffing attempted to keep indexes aligned at the correct positions
by remapping the indexed terms. However under certain edge cases a single
word can stem into 2 different lexemes. If this happened we had an off by
one which caused the entire indexing to fail.
We work around this edge case (and carry incorrect index positions) for cases
like this. It is unlikely to impact search quality at all given index position
makes almost no difference in the search algorithm.
That column is obsolete since we added the `granted_title_badge_id` column in 2019 (56d3e29a69). Having both columns can lead to inconsistencies (mostly due to old data from before 2019).
For example, `BadgeGranter.revoke_ungranted_titles!` doesn't work correctly if `badge_granted_title` is `false` while `granted_title_badge_id` points to the badge that is used as title.
We currently apply type: :link watched words to custom user fields. This makes the user card pretty ugly because we don't allow html / links there. Additionally, the admin UI also does not say that we apply this to custom user fields, but only words in posts.
So this PR is to remove the replacement of link-type watch words for custom user fields.
* FIX: do not notify admins on suppressed categories
Avoid notifying admins on categories where they are not explicitly members
in cases where SiteSetting.suppress_secured_categories_from_admin is
enabled.
This helps keep notification stream clean and avoids admins mistakenly
being invited to discussions that should be suppressed
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
This PR is a major change to Sass compilation in Discourse.
The new version of sass-ruby moves to dart-sass putting we back on the supported version of Sass. It does so while keeping compatibility with the existing method signatures, so minimal change is needed in Discourse for this change.
This moves us
From:
- sassc 2.0.1 (Feb 2019)
- libsass 3.5.2 (May 2018)
To:
- dart-sass 1.58
This update applies the following breaking changes:
>
> These breaking changes are coming soon or have recently been released:
>
> [Functions are stricter about which units they allow](https://sass-lang.com/documentation/breaking-changes/function-units) beginning in Dart Sass 1.32.0.
>
> [Selectors with invalid combinators are invalid](https://sass-lang.com/documentation/breaking-changes/bogus-combinators) beginning in Dart Sass 1.54.0.
>
> [/ is changing from a division operation to a list separator](https://sass-lang.com/documentation/breaking-changes/slash-div) beginning in Dart Sass 1.33.0.
>
> [Parsing the special syntax of @-moz-document will be invalid](https://sass-lang.com/documentation/breaking-changes/moz-document) beginning in Dart Sass 1.7.2.
>
> [Compound selectors could not be extended](https://sass-lang.com/documentation/breaking-changes/extend-compound) in Dart Sass 1.0.0 and Ruby Sass 4.0.0.
SCSS files have been migrated automatically using `sass-migrator division app/assets/stylesheets/**/*.scss`
The algorithm failed to find the correct category by slug when there are multiple sub-sub-categories with the same child-category name and the first child doesn't have the correct grandchild.
So, searching for "child / grandchild" worked in the following case, it found (3):
- (1) parent 1
- (2) child
- (3) grandchild
- (4) parent 2
- (5) child
- (6) grandchild
But it failed to find the grandchild in the following case:
- (1) parent 1
- (2) child
- (4) parent 2
- (5) child
- (6) grandchild
And this also fixes a flaky spec by forcing categories to always order by by `parent_category_id` and `id`.
This makes it possible to partly revert 60990aab55
If a post contains domain with a word that stems to a non prefix single
words will not match it.
For example: in happy.com, `happy` stems to `happi`. Thus searches for happy
will not find URLs with it included.
This bloats the index a tiny bit, but impact is limited.
Will require a full reindex of search to take effect.
When we are done refining search we can consider a full version bump.
Posts with self-mentions aren't updated with username updates. This happens
because mention `UserAction` entries aren't logged for self-mentions.
This change updates the lookup of `Post` and `PostRevision` with mentions to bypass
`UserAction` entries.
Previous regex did not allow for cases where a lexeme contains a : (colon)
This can happen when parsing URLs. New algorithm allows for this.
Test was amended to more clearly call out index problems
* FEATURE: allow restricting duplication in search index
This introduces the site setting `max_duplicate_search_index_terms`.
Using this number we limit the amount of duplication in our search index.
This allows us to more correctly weight title searches, so bloated posts
don't unfairly bump to the top of search results.
This feature is completely disabled by default and behind a site setting
We will experiment with it first. Note entire search index must be rebuilt
for it to take effect.
---------
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Using a shared channel with per-message permissions means that every client is updated with the channel's 'last_id', even if there are no messages available to them. Per-user channel names avoid this problem - the last_id will only be incremented when there is a message for the given user.
There was an issue where if hashtag-cooked HTML was sent
to the ExcerptParser without the keep_svg option, we would
end up with empty </use> and </svg> tags on the parts of the
excerpt where the hashtag was, in this case when a post
push notification was sent.
Fixed this, and also added a way to only display a plaintext
version of the hashtag for cases like this via PrettyText#excerpt.
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
We've been doing some work to support new keyword argument semantics in Ruby 3. As part of that we made some changes to `DiscourseEvent::TestHelper`. The backwards compatibility fix doesn't work if the method is called with an empty hash as the final argument. This fix adds a valid option to the final hash in the particular test.
We were using the `for_input: true` param when calling
DiscourseTagging, which is really meant for selecting tags
in the UI, which often need a parent tag selected first
before the child tags in tag group will show. We just
want to show all tags regardless of grouping in hashtag
search.`
We generally do not return muted child categories to the user
if they have muted the parent category, this commit respects that
rule for CategoryHashtagDataSource
* DEV: Skip push notifications for active online users
Currently, users with active push subscriptions get push notifications
regardless of their "presence" on the site.
This change introduces a `push_notification_time_window_mins`
site setting which is used in conjunction with a user's `last_seen_at` to
determine if push notifications should be sent. A user is considered to
be actively online if their `last_seen_at` is within `push_notification_time_window_mins`
minutes. `push_notification_time_window_mins` is set to 10 by default.
* DEV: Remove client param for push_notification_time_window_mins site setting
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
* UX: added fadeout + hashtag styling
UX: add full name to autocomplete
UX: autocomplete mentions styling
UX: emoji styling user status
UX: autocomplete emoji
* DEV: Move hashtag tag counts into new secondary_text prop
* FIX: Add is-online style to mention users via chat
UX: make is-online avatar styling globally available
* DEV: Fix specs
* DEV: Test fix
Co-authored-by: Martin Brennan <martin@discourse.org>
Follow up to a review in #18937, this commit changes the HashtagAutocompleteService to no longer use class variables to register hashtag data sources or types in context priority order. This is to address multisite concerns, where one site could e.g. have chat disabled and another might not. The filtered plugin registers I added will not be included if the plugin is disabled.
This introduces another "section" of queries to the
hashtag autocomplete search, which returns results for
each type that start with the search term. So now results
will be in this order, and within these sections ordered
by the types in priority order:
1. Exact matches sorted by type
2. "starts with" sorted by type
3. Everything else sorted by type then name within type
When user is watching category or tag (watching or watching first post) notifications are moved to other tab.
To achieve that and distinguish between post create to directly watched topics and indirectly watched topics, new notification type called `watching_category_or_tag` was introduced.
This sometimes got the Uncategorized category and
sometimes not, because it also had a topic count
of 0 same as the "fun" category. Giving the "fun"
category a higher count will fix the issue.
* FIX: Use Category.secured(guardian) for hashtag datasource
Follow up to comments in #19219, changing the category
hashtag datasource to use Category.secured(guardian) instead
of Site.new(guardian).categories here since the latter does
more work for not much benefit, and the query time is the
same. Also eliminates some Hash -> Model back and forth
busywork. Add some more specs too.
* FIX: Server-side hashtag lookup cooking user loading
When we were using the PrettyText.options.currentUser
and parsing back and forth with JSON for the hashtag
lookups server-side, we had a bug where the user's
secure categories were not loaded since we never actually
loaded a User model from the database, only parsed it
from JSON.
This commit fixes the issue by instead using the
PretyText.options.userId and looking up the user directly
from the database when calling hashtag_lookup via the
PrettyText::Helpers code when cooking server-side. Added
the missing spec to check for this as well.
This commit allows us to type # in the UI and present autocomplete
results immediately with the following logic for the topic composer,
and reversed for the chat composer:
* Categories the user can access and has not muted sorted by `topic_count`
* Tags the user can access and has not muted sorted by `topic_count`
* Chat channels the user is a member of sorted by `messages_count`
So in effect, we allow searching for hashtags without a search term.
To do this we add a new `search_without_term` to each data source so
each one can define how it wants to handle this logic.
When looking up hashtags which were conflicting (e.g.
management::tag and management) where the user did
not have permission for one of them, we ended up returning
the one they did have permission to (e.g. the tag) twice
because of the way the lookup fallback code worked. This
fixes the issue, and another related one where the
::type was not added to the found item's .ref, and
so the hashtag replacement on the client was not working
correctly.
* FIX: Save only visible fields from the sidebar page
* FIX: Do not reset seen popups when set to false
If the option was unchecked, but it was not changed at all by the user
it was still sent to the server as a 'false' value which reset all seen
popups. This removes that behavior and resetting the list of seen popups
must be done using the "skip new user tips" button.
When searching for categories it is possible for
a child category to have a slug that matches the term
exactly, but will not be found by .lookup since we
don't return these categories unless the ref matches
parent:child.
Introduces a search_sort method to each hashtag data
source so they can provide their custom sort logic of
results, in category's case putting all matching slugs
to the top regardless of parent/child relationship
then sorting by text.
This changes the hashtag search to first do a lookup to find
results where the slug exactly matches the
search term. Now when we search for hashtags, the
exact matches will be found first and put at the top of
the results.
`ChatChannelFetcher` has also been modified here to allow
for more options for performance -- we do not need to
query DM channels for secured IDs when looking up or searching
channels for hashtags, since they should never show in
results there (they have no slugs). Nor do we need to include
the channel archive records.
Also changes the limit of hashtag results to 20 by default
with a hidden site setting, and makes it so the scroll for the
results is overflowed.
The user attributes are not updated between clients and that is a
problem with user tips because the same user tip will be displayed
multiple times, once for every client.
The tag ordering was inconsistent, because we were not
passing the correct order option to DiscourseTagging.filter_allowed_tags.
The order would change based on the limit provided. Now,
we can have a consistent order which is term exact match -> topic count ->
name.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Related to aeee7ed.
Before the change in aeee7ed, notifications for direct replies to your posts and notifications for replies in watched topics looked the same in the notifications menu -- they both used the arrow icon.
We decided in aeee7ed to distinguish them by changing "watched topics" notifications to use the bell icon because it was confusing for users who watch topics to see the same icon for direct replies and "watched topics". However, that change also means that non-power/new users who receive replies to topics _they create_ will get notifications with the bell icon because technically they're watching the topic, but the arrow icon is more appropriate for this case because we use it throughout the app to indicate "replies".
This commit adds a special-case so that if a user is watching a topic AND the topic is created by them, they receive notifications with the arrow icon (type `replied`) instead of the bell icon (type `posted`) for new posts in the topic.
Internal topic: t/79051.
Adds sorting for the HashtagAutocompleteService to
sort the results by case-insensitive text _within_
the type sort order specified by the params. This
should fix some flaky specs as well.
This commit adds a new `/hashtag/search` endpoint and both
relevant JS and ruby plugin APIs to handle plugins adding their
own data sources and priority orders for types of things to search
when `#` is pressed.
A `context` param is added to `setupHashtagAutocomplete` which
a corresponding chat PR https://github.com/discourse/discourse-chat/pull/1302
will now use.
The UI calls `registerHashtagSearchParam` for each context that will
require a `#` search (e.g. the topic composer), for each type of record that
the context needs to search for, as well as a priority order for that type. Core
uses this call to add the `category` and `tag` data sources to the topic composer.
The `register_hashtag_data_source` ruby plugin API call is for plugins to
add a new data source for the hashtag searching endpoint, e.g. discourse-chat
may add a `channel` data source.
This functionality is hidden behind the `enable_experimental_hashtag_autocomplete`
flag, except for the change to `setupHashtagAutocomplete` since only core and
discourse-chat are using that function. Note this PR does **not** include required
changes for hashtag lookup or new styling.
This commit introduces a new framework for building user tutorials as
popups using the Tippy JS library. Currently, the new framework is used
to replace the old notification spotlight and tips and show a new one
related to the topic timeline.
All popups follow the same structure and have a title, a description and
two buttons for either dismissing just the current tip or all of them
at once.
The state of all seen popups is stored in a user option. Updating
skip_new_user_tips will automatically update the list of seen popups
accordingly.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
A user could receive more than a notification for the same post if they
watched both the categories and tags at different levels. This commit
makes sure that only the watching notification is created.
* Add DiscourseEvent before post notifications are created
If a user was granted a trust level, joined a group that granted a trust
level and left the group, the trust level was reset. This commit tries
to restore the last known trust level before joining the group by
looking into staff logs.
This commit also migrates old :change_trust_level user history records
to use previous_value and new_value fields.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
The previous method for reused the PrettyText logic which applied the
watched word logic, but had the unwanted effect of cooking the text too.
This meant that regular text values were converted to HTML.
Follow up to commit 5a4c35f627.
This is so we can join the Notification table onto the
Bookmark table. A slight refactor was needed to ensure
that the required values are always included and the
consumer does not need to think about this.
The discourse-chat and discourse-data-explorer plugins
will be updated to take advantage of this commit.
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
Due to some changes we started notifying via push notifications on other
families of notifications. There are a total of about 30 or so possible
notification you could get, some can be pushed.
This fallback means that if for any reason we are unable to find an icon
for a push notification we just fallback to the Discourse logo.
Also go with a simple reply icon for watching first post.
Note, that in production `image_url` can return an exception if an image is
missing. This is not the case in test / development.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
This makes it easier to find PMs involving a particular user, for
example by searching for `in:messages thisUser` (previously, that query
would only return results in posts where `thisUser` was in the post body).
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
7a284164 previously switched the UserDestroyer to use find_each when iterating over UserHistory records. Unfortunately, since this logic is wrapped in a transaction, this didn't actually solve the memory usage problem. ActiveRecord maintains references to all modified models within a transaction.
This commit updates the logic to use a single SQL query, rather than updating models one-by-one
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
This commit improves the logic for rolling up IPv4 screened IP
addresses and extending it for IPv6. IPv4 addresses will roll up only
up to /24. IPv6 can rollup to /48 at most. The log message that is
generated contains the list of original IPs and new subnet.
All users are members of the EVERYONE group, but this group is special and
is omitted from the group_users table. When checking permission we need to
make sure we also add a bypass.
This also fixes a very buggy test in post_alerter, it was confirming the
broken behavior due to fabricator flow.
When it defined the tag group the everyone group automatically had full access
then the additional permission fabricated just added one more group. After
fix was made to code the test started failing. Fabricators can be risky.
When emailing a group inbox and including other support-type
emails (or even just regular ones with autoresponders) in the
CC field, each automated reply to the group inbox triggered
more emails to be sent out to all CC addresses to notify them
of the new reply, which in turn caused more automated emails
to be sent to the group inbox.
This commit fixes the issue by preventing any emails being sent
by the PostAlerter when the new post has an incoming email record
which is_auto_generated, which we detect in Email::Receiver.
Fixes the issue where making a user x as owner of a post doesn't
cause the concerned topic to be listed in new owner's `My Posts`
top menu filter
per https://meta.discourse.org/t/199369
Under some conditions, replacing an `<img` with `![]()` can break rendering, and make the image disappear.
Context at https://meta.discourse.org/t/152801
The search_ignore_accents site setting can be used to make the search
indexer remove the accents before indexing the content. The unaccent
function from PostgreSQL is better than Ruby's unicode_normalize(:nfkd).
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
In ab5361d69a, we rescue from the PG error
but the transaction is already aborted causing any DB query after to
fail. As such, we avoid triggering the error in the first place by
checking that we would not be insertin a negative number into the
counter cache.
Follow-up to ab5361d69a
There are still spots in the code base which results in us trying to turn the post and topic count negative. However,
we have a job that runs on a daily basis which will correct the count. Therefore, avoid raising an error for now
and log the exception instead.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
This commit fixes a bug where we our `HTMLScrubber` was only searching
for emoji img tags which contains only the "emoji" class. However, our emoji image tags
may contain more than just the "emoji" class like "only-emoji" when an
emoji exists by itself on a single line.
* FIX: Tag watching for everyone tag groups
Tags in tag groups that have permissions set to everyone were not able
to be saved correctly. A user on their preferences page would mark the
tags that they wanted to save, but the watched_tags in the response
would be empty. This did not apply to admins, just regular users. Even
though the watched tags were being saved in the db, the user serializer
response was filtering them out. When a user refreshed their preferences
pages it would show zero watched tags.
This appears to be a regression introduced by:
0f598ca51e
The issue that needed to be fixed is that we don't track the "everyone"
group (which has an id of 0) in the group_users table. This is because
everyone has access to it, so why fill a row for every single user, that
would be a lot. The fix was to update the query to include tag groups
that had permissions set to the "everyone" group (group_id 0).
I also added another check to the existing spec for updating
watched tags for tags that aren't in a tag group so that it checks the
response body. I then added a new spec which updates watched tags for
tags in a tag group which has permissions set to everyone.
* Resolve failing tests
Improve SQL query syntax for including the "everyone" group with the id
of 0.
This commit also fixes a few failing tests that were introduced. It
turns out that the Fabrication of the Tag Group Permissions was faulty.
What happens when creating the tag groups without any permissions is
that it sets the permission to "everyone". If we then follow up with
fabricating a tag group permission on the tag group instead of having a
single permission it will have 2 (everyone + the group specified)! We
don't want this. To fix it I removed the fabrication of tag group
permissions and just set the permissions directly when creating the tag
group.
* Use response.parsed_body instead of JSON.parse
You can add callbacks that get called before updating an already consolidated notification or creating a consolidated one.
Instances of this rule can add callbacks to access the old notifications about to be destroyed or the consolidated one and add additional data inside the data hash versus having to execute extra queries when adding this logic inside the `set_mutations` block.
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
We previously used ConsolidateNotifications with a threshold of 1 to re-use an existing notification and bump it to the top instead of creating a new one. It produces some jumpiness in the user notification list, and it relies on updating the `created_at` attribute, which is a bit hacky.
As a better alternative, we're introducing a new plan that deletes all the previous versions of the notification, then creates a new one.
* REFACTOR: Improve support for consolidating notifications.
Before this commit, we didn't have a single way of consolidating notifications. For notifications like group summaries, we manually removed old ones before creating a new one. On the other hand, we used an after_create callback for likes and group membership requests, which caused unnecessary work, as we need to delete the record we created to replace it with a consolidated one.
We now have all the consolidation rules centralized in a single place: the consolidation planner class. Other parts of the app looking to create a consolidable notification can do so by calling Notification#consolidate_or_save!, instead of the default Notification#create! method.
Finally, we added two more rules: one for re-using existing group summaries and another for deleting duplicated dashboard problems PMs notifications when the user is tracking the moderator's inbox. Setting the threshold to one forces the planner to apply this rule every time.
I plan to add plugin support for adding custom rules in another PR to keep this one relatively small.
* DEV: Introduces a plugin API for consolidating notifications.
This commit removes the `Notification#filter_by_consolidation_data` scope since plugins could have to define their criteria. The Plan class now receives two blocks, one to query for an already consolidated notification, which we'll try to update, and another to query for existing ones to consolidate.
It also receives a consolidation window, which accepts an ActiveSupport::Duration object, and filter notifications created since that value.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
Use @here to mention all users that were allowed to topic directly or
through group, who liked topics or read the topic. Only first 10 users
will be notified.
We are pushing /notification-alert/#{user_id} and /notification/#{user_id}
messages to MessageBus from both PostAlerter and User#publish_notification_state.
This can cause memory issues on large sites with many users. This commit
stems the bleeding by only sending these alert messages if the user
in question has been seen in the last 30 days, which eliminates a large
chunk of users on some sites.
When 31035010af
was done it failed to take into account the case where the smtp_enabled
site setting was true, but the topic had no allowed groups / no
incoming email record, which caused errors for topics even with
nothing to do with group SMTP.
When there are multiple groups on a topic, we were selecting
the first from the topic allowed groups to act as the sender
email address when sending group SMTP replies via PostAlerter.
However, this was not ordered, and since there is no created_at
column on TopicAllowedGroup we cannot order this nicely, which
caused just a random group to be used (based on whatever postgres
decided it felt like that morning).
This commit changes the group used for SMTP sending to be the
group using the email_username of the to address of the first
incoming email for the topic, if there are more than one allowed
groups on the topic. Otherwise it just uses the only SMTP enabled
group.
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
Calling create_notification_alert could still send a notification to a
suspended user. This just moves the check if user is suspended right
before sending the notification.
The file size error messages for max_image_size_kb and
max_attachment_size_kb are shown to the user in the KB
format, regardless of how large the limit is. Since we
are going to support uploading much larger files soon,
this KB-based limit soon becomes unfriendly to the end
user.
For example, if the max attachment size is set to 512000
KB, this is what the user sees:
> Sorry, the file you are trying to upload is too big (maximum
size is 512000KB)
This makes the user do math. In almost all file explorers that
a regular user would be familiar width, the file size is shown
in a format based on the maximum increment (e.g. KB, MB, GB).
This commit changes the behaviour to output a humanized file size
instead of the raw KB. For the above example, it would now say:
> Sorry, the file you are trying to upload is too big (maximum
size is 512 MB)
This humanization also handles decimals, e.g. 1536KB = 1.5 MB
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
While merging two user accounts don't merge the source user's email address if the target user is not a human.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
We shouldn't be checking if a user is allowed to do an action in the logger. We should be checking it just before we perform the action. In fact, guardians in the logger can make things even worse in case of a security bug. Let's say we forgot to check user's permissions before performing some action, but we still have a call to the guardian in the logger. In this case, a user would perform the action anyway, and this action wouldn't even be logged!
I've checked all cases and I confirm that we're safe to delete this calls from the logger.
I've added two calls to guardians in admin/user_controller. We didn't have security bugs there, because regular users can't access admin/... routes at all. But it's good to have calls to guardian in these methods anyway, neighboring methods have them.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
In badge queries for 'First Share' and 'Nice/Good/Great Share' badges,
check that the user exists.
For 'Nice+ Share' badges, also grant badges if the number of shares is
equal to the threshhold count to better match the descriptions.
Configuring staged users to watch categories and tags is a way to sign
them up to get many emails. These emails may be unwanted and get marked
as spam, hurting the site's email deliverability.
Users can opt-in to email notifications by logging on to their
account and configuring their own preferences.
If staff need to be able to configure these preferences on behalf of
staged users, the "allow changing staged user tracking" site setting
can be enabled. Default is to not allow it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
There was a bug with changing timestamps using the topic wrench button. Under some circumstances, a topic was disappearing from the top of the latest tab after changing timestamps. Steps to reproduce:
- Choose a topic on the latest tab (the topic should be created some time ago, but has recent posts)
- Change topic timestamps (for example, move them one day forward):
- Go back to the latest tab and see that topic has disappeared.
This PR fixes this. We were setting topic.bumped_at to the timestamp user specified on the modal. This is incorrect. Instead, we should be setting topic.bumped_at to the created_at timestamp of the last regular (not a whisper and so on) post on the topic.
