When replying to a user_private_message email originating from
a group PM that does _not_ have a reply key (e.g. when replying
directly to the group's SMTP address), we were mistakenly linking
the new post created from the reply to the OP and the user who
created the topic, based on the first IncomingEmail message ID in
the topic, rather than using the correct reply to user and post number
that the user actually replied to.
We now use the In-Reply-To header to look up the corresponding EmailLog
record when the user who replied was sent a user_private_message email,
and use the post from that as the reply_to_user/post.
This also removes superfluous filtering of incoming_email records. After
already filtering by message_id and then addressed_to_user (which only
returns incoming emails where the to, from, or cc address includes any
of the user's emails), we were filtering again but in the ruby code for
the exact same conditions. After removing this all existing tests still
pass.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
Setting a key/value pair in DistributedCache involves waiting on the
write to Redis to finish. In most cases, we don't need to wait on the
setting of the cache to finish. We just need to take our return value
and move on.
This allows us to do DISTINCT on the topic_id to remove
duplicates (e.g. in extensions to the report SQL), and
also introduces an additional_join_sql string to allow
extensions to JOIN additional tables.
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
When a topic is fully merged into another topic we close it and schedule its deleting. But, because of a bug, if the merged topic contains some moderator actions or small actions it won't be merged. This change fixes this problem.
An important note: in general, we don't want to close a topic after moving posts if it still contains some regular posts or whispers. But when we are moving posts to a private message we don't want the notice about it to be publicly visible. So we use whispers with action_code == 'split_topic' instead of small_actions in such cases and we should ignore this specific kind of whispers when decide if we should close the merged topic.
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
I merged this PR in yesterday, finally thinking this was done https://github.com/discourse/discourse/pull/12958 but then a wild performance regression occurred. These are the problem methods:
1aa20bd681/app/serializers/topic_tracking_state_serializer.rb (L13-L21)
Turns out date comparison is super expensive on the backend _as well as_ the frontend.
The fix was to just move the `treat_as_new_topic_start_date` into the SQL query rather than using the slower `UserOption#treat_as_new_topic_start_date` method in ruby. After this change, 1% of the total time is spent with the `created_in_new_period` comparison instead of ~20%.
----
History:
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
The default `allow_title` column value is "true" for regular and leader badges. After we disable it in admin side the seed method enabling it again while upgrading. So we shouldn't do it for existing badges.
Previously we would retry push notifications indefinitely for all errors
except for ExpiredSubscription
Under certain conditions other persistent errors may arise such as a persistent
rate limit.
If we track more than 3 errors in a period of time longer than a day we will
delete the subscription
Also performs a bit of internal cleanup to ensure protected methods really
are private.
Admins can visit an approved queued topic from the review queue by clicking their title. We no longer store the created post and topic ids in the reviewable's payload object. Instead, we set the `topic_id` and `target_id` attributes.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
If reload a page after enabling slow mode and open the slow mode dialog again it would show a slow mode interval but wouldn't show Enabled Until value. This PR fixes it.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Under certain conditions admins would miss messages when posting action in
topics where they have permission.
This also fixes an error where we would sometimes explode when publishing to
an empty group.
This is a recent regression introduced by https://github.com/discourse/discourse/pull/12937 which makes it so that when looking at a user profile that is not your own, specifically the category and tag notification settings, you would see your own settings instead of the target user. This is only a problem for admins because regular users cannot see these details for other users.
The issue was that we were using `scope` in the serializer, which refers to the current user, rather than using a scope for the target user via `Guardian.new(user)`.
However, on further inspection the `notification_levels_for` method for `TagUser` and `CategoryUser` did not actually need to be accepting an instance of Guardian, all that it was using it for was to check guardian.anonymous? which is just a fancy way of saying user.blank?. Changed this method to just accept a user instead and send the user in from the serializer.
Recalculating a ReviewableFlaggedPost's score after rejecting or ignoring it sets the score as 0, which means that we can't find them after reviewing. They don't surpass the minimum priority threshold and are hidden.
Additionally, we only want to use agreed flags when calculating the different priority thresholds.
* DEV: add a method of skipping publishing stylesheets afer color scheme save
allows a method to publish all stylesheets if we make changes to many
stylesheets at once
* use after_save_commit for stylesheet change callbacks
This may be more reliable for picking up new stylesheet changes via messagebus
as after_save does not guarantee the updates exists in the DB yet.
* add skip_publish option for create_from_base
The user may have changed their category or tag tracking settings since a topic was tracked/watched based on those settings in the past. In that case we need to alter the reason message we show them otherwise it is very confusing for the end user to be told they are tracking a topic because of a category, when they are no longer tracking that category.
For example: "You will see a count of new replies because you are tracking this category." becomes: "You will see a count of new replies because you were tracking this category in the past."
To do this, it was necessary to add tag and category tracking info to current user serializer. I improved the serializer code so it only does 3 SQL queries instead of 9 to get the tracking information for tags and categories for the current user.
Uncategorized was sometimes visible even if allow_uncategorized_topics
was false. This was especially happening on mobile, if at least one
topic was uncategorized.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
If the associated page of a remote url passed to `TopicEmber.new(remote_url)` contained a malformed link like: `<a href="(http://foo.bar)">Baz</a>` it would raise an uncaught exception:
```
Job exception: Invalid scheme format: (http
```
Checking for remote should cleanup after itself. Currently each check litters
the /tmp filesystem with checkouts. This patch ensures that update checks
keep the system a bit tidier.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
The aim of this PR is to improve the topic tracking state JavaScript code and test coverage so further modifications can be made in plugins and in core. This is focused on making topic tracking state changes easier to respond to with callbacks, and changing it so all state modifications go through a single method instead of modifying `this.state` all over the place. I have also tried to improve documentation, make the code clearer and easier to follow, and make it clear what are public and private methods.
The changes I have made here should not break backwards compatibility, though there is no way to tell for sure if other plugin/theme authors are using tracking state methods that are essentially private methods. Any name changes made in the tracking-state.js code have been reflected in core.
----
We now have a `_trackedTopicLimit` in the tracking state. Previously, if a topic was neither new nor unread it was removed from the tracking state; now it is only removed if we are tracking more than `_trackedTopicLimit` topics (which is set to 4000). This is so plugins/themes adding topics with `TopicTrackingState.register_refine_method` can add topics to track that aren't necessarily new or unread, e.g. for totals counts.
Anywhere where we were doing `tracker.states["t" + data.topic_id] = newObject` has now been changed to flow through central `modifyState` and `modifyStateProp` methods. This is so state objects are not modified until they need to be (e.g. sometimes properties are set based on certain conditions) and also so we can run callback functions when the state is modified.
I added `onStateChange` and `onMessageIncrement` methods to register callbacks that are called when the state is changed and when the message count is incremented, respectively. This was done so we no longer need to do things like `@observes("trackingState.states")` in other Ember classes.
I split up giant functions like `sync` and `establishChannels` into smaller functions for readability and testability, and renamed many small functions to _functionName to designate them as private functions which not be called by consumers of `topicTrackingState`. Public functions are now all documented (well...at least ones that are not immediately obvious).
----
On the backend side, I have changed the MessageBus publish events for TopicTrackingState to send back tags and tag IDs for more channels, and done some extra code cleanup and refactoring. Plugins may override `TopicTrackingState.report` so I have made its footprint as small as possible and externalised the main parts of it into other methods.
If the "use_site_small_logo_as_system_avatar" setting is enabled, the site's small logo is displayed as the selected option by the avatar-selector. Choosing a different avatar disables the setting.
When building the `scss_load_paths`, we were creating a full export of the theme (including uploads), and not cleaning it up. With many uploads, this can be extremely slow (because it downloads every upload from S3), and the lack of cleanup could cause a disk to fill up over time.
This commit updates the ZipExporter to provide a `with_export_dir` API, which takes care of cleanup. It also adds a kwarg which allows exporting only extra_scss fields. This should make things much faster for themes with many uploads.
These endpoints only return one `Theme` row, but the one-many relations were not being preloaded efficiently. This commit moves the `includes` statement to a scope, and makes use of it in `#index`, `#show`, and `#update`.
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
Adds a webhook to notify when a reviewable score is updated.
This is different from created or status changed as additional flags can
roll in and update the score without updating status. Useful for applications
looking to integrate in with Discourse's scores
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
This filter hides reviewables with a score lower than the "reviewable_low_priority_threshold" setting. We only use reviewables that already met this threshold to calculate the Medium and High priority filters.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
When a user flags a post with the “Something Else” option, a PM between
the user and the moderators group is created. If no moderators reply to
the PM, when the flag is handled at /review, an auto-reply is created
for the PM. However, the PM is not archived, it stays in the inbox.
This commit ensures that the PM is archived for moderator group when no
moderator has replied to that PM.
* FEATURE: Review every post using the review queue.
If the `review_every_post` setting is enabled, posts created and edited by regular uses are sent to the review queue so staff can review them. We'll skip PMs and posts created or edited by TL4 or staff users.
Staff can choose to:
- Approve the post (nothing happens)
- Approve and restore the post (if deleted)
- Approve and unhide the post (if hidden)
- Reject and delete it
- Reject and keep deleted (if deleted)
- Reject and suspend the user
- Reject and silence the user
* Update config/locales/server.en.yml
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Rails 6.1.3.1 deprecates a few API and has some internal changes that break our tests suite, so this commit fixes all the deprecations and errors and now Discourse should be fully compatible with Rails 6.1.3.1. We also have a new release of the rails_failover gem that's compatible with Rails 6.1.3.1.
Previously it would pluck 6 categories which the user had posted in, **then** order them. To select the **top 6** categories, we need to perform the ordering in the SQL query before the LIMIT
We used to generate invite keys that were 32-characters long which were
not very friendly and lead to very long links. This commit changes the
generation method to use almost all alphanumeric characters to produce
a 10-character long invite key.
This commit also introduces a rate limit for redeeming invites because
the probability of guessing an invite key has increased.
When invited by email, users will receive an invite URL which contains
a token. If that token is present when the invite is redeemed, their
account will be automatically activated.
* FIX: Use theme color for anchor icon
* FIX: Do not count anchor links
* FIX: Do not count hashtags links either
* DEV: Add tests for link_count
* FIX: Disable anchors in quotes and preview
* FIX: Try building some anchor slugs for unicode
* DEV: Fix tests
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
When posts are moved from one topic to another, the `topic_user.bookmarked` column for all users in the new and the old topic needs to be resynced, for example because a user bookmarks post 12 in topic 1, then it is moved to topic 2, the topic_user record for topic 1 should no longer be bookmarked. A background job has been added to sync the column for a specified topic, or for no topic at all, which does it for all topics like the migration.
Also includes a migration that we have run in the past to fix bad data.
----
This has been addressed in other places in the past:
https://github.com/discourse/discourse/pull/10211https://github.com/discourse/discourse/pull/10188
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to how Discourse processes JavaScript that comes with themes/components, and these refactors may break your JS customizations; see https://meta.discourse.org/t/upcoming-core-changes-that-may-break-some-themes-components-april-12/186252?u=osama for details on how you can check if your themes/components are affected and what you need to do to fix them.
This commit also improves theme error handling in Discourse. We will now be able to catch errors that occur when theme initializers are run and prevent them from breaking the site and other themes/components.
Previously certain images may lead to convert / identify to run for unreasonable
amounts of time
This adds a maximum amount of time these commands can run prior to forcing
them to stop
We introduced a cap on the number of bookmarks the user can add in be145ccf2f. However this has caused unintended side effects; when the `jobs/scheduled/bookmark_reminder_notifications.rb` runs we get this error for users who already had more bookmarks than the limit:
> Job exception: Validation failed: Sorry, you have too many bookmarks, visit #{url}/my/activity/bookmarks to remove some.
This is because the `clear_reminder!` call was triggering a bookmark validation, which raised an error because the user already had to many, holding up other reminders.
This PR also adds `max_bookmarks_per_user` hidden site setting (default 2000). This replaces the BOOKMARK_LIMIT const so we can raise it for certain sites.
Previously, if the upload_id was present, but the upload was missing, the entire site would give a server error.
We have no foreign keys on this relation, so we have to be able to cope with the situation where the upload_id is present, but the actual upload has been deleted.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to internal code that's responsible for processing themes/components in Discourse, most notably:
* `<script type="text/discourse-plugin">` tags are automatically converted to modules.
* The `theme-settings` service is removed in favor of a simple `lib` file responsible for managing theme settings. This was done to allow us to register/lookup theme settings very early in our Ember app lifecycle and because there was no reason for it to be an Ember service.
These refactors should 100% backward compatible and invisible to theme developers.
* DEV: small refactor of the category_moderators method
Used `index_by(&:id)` instead of `map { |u| [u.id, u] }.to_h` thanks to @cvx's recommendation.
Also renamed the `moderators` variable to not clash with method of the same name.
Admins can use bulk invites to pre-populate user fields. The imported
CSV file must have a header with "email" column (first position) and
names of the user fields (exact match).
Under the hood, the bulk invite will create staged users and populate
the user fields of those.
Because bookmarks have both topic and post ID, when the post was moved into another topic the bookmark was still attached to the post but did not show in the UI. This PR makes it so the all topic IDs for bookmarks attached to a post are updated when a post is moved.
Also included is a migration to fix affected records (e.g. on Meta there are 20 affected records).
See: https://meta.discourse.org/t/improved-bookmarks-with-reminders/144542/203
In the about page, we list a certain number of category moderators.
This rewrites the SQL query used to retrieve the most recent category moderators in order
to perform better with a large number of users/categories/category moderators.
TIL: you can ORDER BY inside an ARRAY_AGG in postgres
TIL: you can slide ARRAYS in postgres
When overriding the translation for i18n keys used in user notifications
like user_notifications.reply_by_email, errors were returned for
valid interpolation keys. Keys like topic_title_url_encoded are
supported, so no error should be raised.
https://meta.discourse.org/t/-/50305/7
Find & Replace and Autotag watched words were not completely exported
and import did not work with these either. This commit changes the
input and output format to CSV, which allows for a secondary column.
This change is backwards compatible because a CSV file with only one
column has one value per line.
Users can now pin bookmarks from their bookmark list. This will anchor the bookmark to the top of the list, and show a pin icon next to it. This also applies in the nav bookmarks panel. If there are multiple pinned bookmarks they sort by last updated order.
We previously included this option conditionally when users were replying
or creating a new topic while they had content already in the composer.
This makes the dialog always include three buttons:
- Close and discard
- Close and save draft for later
- Keed editing
This also changes how the backend notifies the frontend when there is
a current draft topic. This is now sent via the `has_topic_draft`
property in the current user serializer.
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
When transitioning from a tag topic list e.g. /tag/alerts
to the / route the topic list was not reloaded because the
same preload key was used for both lists (topic_list_latest).
The topic list was only reloaded when clicking on the / route
a second time because then it is forced to reload.
In the topic list adapter, we call `PreloadStore.getAndRemove` to
get the topic lists:
534777f5fd/app/assets/javascripts/discourse/app/adapters/topic-list.js (L34-L41)
Now instead of both / and /tag/alerts sharing the same preload
key of `topic_list_latest`, the tag has a key of `topic_list_tag/alerts/l/latest`
Staff can send a post to the review queue by clicking the "Flag Post" button next to "Take Action...". Clicking it flags the post using the "Notify moderators" score type and hides it. A custom message will be sent to the user.
This is not recommended. But if you have other protections in place for CSRF mitigation, you may wish to disable Discourse's implementation. This site setting is not visible in the UI, and must be changed via the console.
* FEATURE: Do not delete invite if link was copied
* FIX: Show error to user if invite redeeming fails
The error was only displayed to console.
* UX: Better placement of bulk buttons
Destroy all expired invites should be on the expired tab, not pending.
* FIX: Ensure invited_groups is unique per invite and group
* FIX: Do not refresh topic list if title unchanged
* FIX: Do not close modal on enter
This intereferes with the group and topic chooser.
Wrapping everything in a form disables this behavior.
* FIX: Move link and email options outside advanced section
* FIX: Do not close modal if saving a link invite
User may still want to copy the link.
* FIX: Do not show expired invites under Pending tab
* DEV: Controller action was renamed in previous commit
* FEATURE: Add 'Expired' tab to invites
* FEATURE: Refresh model after removing expired invites
* FEATURE: Do not immediately add invite to the list
Opening the 'create-invite' modal used to automatically generate an
invite to reserve an invite link. If the user did not save it and
closed the modal, the invite would be destroyed. This operations caused
the invite list to change in the background and confuse users.
* FEATURE: Sort redeemed users by creation time
* UX: Improve show / hide advanced options link
* FIX: Show redeemed users even if invites were trashed
* UX: Change modal title when editing invite
* UX: Remove Get Link button
Users can get it from the edit modal
* FEATURE: Add limit for invite links generated by regular users
* FEATURE: Add option to skip email
* UX: Show better error messages
* FIX: Show "Invited by" even if invite was trashed
Follow up to 1fdfa13a099d8e46edd0c481b3aaaafe40455ced.
* FEATURE: Add button to save without sending email
Follow up to c86379a465f28a3cc64a4a8c939cf32cf2931659.
* DEV: Use a buffer to hold all changed data
* FEATURE: Close modal after save
* FEATURE: Rate limit resend invite email
* FEATURE: Make the save buttons smarter
* FEATURE: Do not always send email even for new invites
The Guardian object memoizes a list of allowed user fields. Normally this is fine because Guardian objects only persist for a single request. However, the WebHook class was memoizing a guardian at the class level. This meant that an app restart was required for changes to be reflected. Plus, the Guardian was being shared across all sites in a multisite instance.
Initializing a guardian is cheap, so we can manage without memoization here.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
When `PostCreator` creates a new topic it loads the `allowed_groups` of the topic. `Fabricate` doesn't do that and that's why the existing spec worked even though it should have failed, because `PostAlerter#notify_group_summary` didn't create a notification for a non-fabricated topic.
`Topic#invite_group` added a new `TopicAllowedGroup` record without reloading `Topic.allowed_groups`. A subsequent call to `PostAlerter#notify_group_summary` didn't work because it didn't find the invited group in the topic's `allowed_groups` association.
Fix for: https://meta.discourse.org/t/our-components-stop-working/181580?u=osama.
This fixes an old hidden bug that was exposed in cf0192018e. The bug is that we call the `Stylesheet::Manager.stylesheet_details` method with the `target` arg as `:mobile_theme` when we want to retrieve a theme component's mobile CSS. The problem is that this `target` value will at some point be looked up in the `Theme.targets` enum which doesn't have a `:mobile_theme` key, instead it has `:mobile` key.
This commit adds a step that removes the `_theme` suffix in the `Theme.list_baked_fields` method to fix this problem.
SVG files can have dimensions expressed in inches, centimeters, etc., which may lead to the dimensions being misinterpreted (e.g. “8in” ends up as 8 pixels).
If the file type is `svg`, ask ImageMagick to work out what size the SVG file should be rendered on screen.
NOTE: The `pencil.svg` file was obtained from https://freesvg.org/1534028868, which has placed the file in to the public domain.
Unactivated users that have posts cannot be deleted so we shouldn't
include them in the initial query to try and purge them. Otherwise we
are just loading up sidekiq with pointless work to be doing every day.
Without this change if there are 201 unactivated users to purge, but the
first 200 have posts, the 201st user will never be deleted even though
it is the only user that doesn't have a post and is actually the one
that should be deleted.
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
- removes the option from site settings
- deletes the site setting on existing sites that have it
- marks posts using emojis as requiring a rebake
Note that the actual image files are not removed here, the plan is to
remove them in a few weeks/months (when presumably the rebaking of old
posts has been completed).
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
The API now accepts an array called "ids" to select specific items. This parameter is not present on the UI.
Example usage: "yoursite.com/review.json?ids[]=1&ids[]=2"
though other participants are not in allowed list)
If you create an allowlist of users who can PM you, and use the function
“Only specific users can send me private messages”, then you can’t be
added to group messages unless everyone in that message is already in
your allow list.
This commit allows user to be added to a group message even when other
participants are not in allowed list
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
Default scopes are stored inside a class variable, which shouldn't be modified when a custom scope is added. If this happens, we're no longer to remove the scope when the plugin is disabled.
Some users somehow manage to keep a topic open for a very long time that it causes the post read time to exceed the max integer value (2^31 - 1) which causes errors when we try to update the read time in the database to values above the integer limit.
This PR will cap posts read time at 2^31 - 1 to prevent these errors.
Adding a scope from a plugin was broken. This commit fixes it and adds a test.
It also documents the instance method and renames the serialized "id" attribute to "scope_id" to avoid a conflict when the scope also has a parameter with the same name.
Previously when inheriting category auto-close settings for a topic, those settings were disrupted if another topic timer was assigned or if a topic was closed then manually re-opened.
This PR makes it so that when a topic is manually re-opened the topic auto-close settings are inherited from the category. However, they will now be based on the topic created_at date. As an example, for a topic with a category auto close hours setting of 72 (3 days):
* Topic was created on 2021-02-15 08:00
* Topic was closed on 2021-02-16 10:00
* Topic was opened again on 2021-02-17 06:00
Now, the topic will inherit the auto close timer again and will close automatically at **2021-02-18 08:00**, which is based on the creation date. If the current date and time is greater than the original auto-close time (e.g. we were at 2021-02-20 13:45) then no auto-close timer is created.
Note, this will not happen if the topic category auto-close setting is "based on last post".
Updating a topic's visibility did not increase or decrease the
topic_count of a category, but Category.update_stats does ignore
unlisted topics which resulted in inconsistencies when deleting
such topics.
Original PR was reverted because of broken migration https://github.com/discourse/discourse/pull/12058
I fixed it by adding this line
```
AND topics.id IN(SELECT id FROM topics ORDER BY created_at DESC LIMIT :max_new_topics)
```
This time it is left joining a limited amount of topics. I tested it on few databases and it worked quite smooth
* DEV: Show warning message when using ember css selectors
When editing the theme css via the admin UI a warning message
will be displayed if it detects that the `#emberXXX` or `.ember-view`
css selectors are being used. These are dynamic selectors that ember
generates, but they can change so they should not be used.
* Update error message text to be more helpful
* Display a warning instead of erroring out
This allows the theme to still be saved, but a warning is displayed.
Updated the tests to check for the error message.
Updated the pre tags css so that it wraps for long messages.
Follow up https://github.com/discourse/discourse/pull/11968
Dismiss all new topics using the same DismissTopicService. In addition, MessageBus receives exact topic ids which should be marked as `seen`.
* FEATURE: Ability to dismiss new topics in a specific tag
Follow up of https://github.com/discourse/discourse/pull/11927
Using the same mechanism to disable new topics in a tag.
* FIX: respect when category and tag is selected
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
Using "UrlHelper#absolute" returns the S3 URL, which is fine for the client because it modifies it to use the CDN instead. On the other hand, this replacement doesn't happen when the URL is server-side rendered, returning a 403 for the system's avatar.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Not when doing a site-wide search like we do in the Directory.
This solves the following specfailure:
1) DirectoryItemsController with data finds user by name
Failure/Error: expect(json['directory_items'].length).to eq(1)
expected: 1
got: 0
(compared using ==)
# ./spec/requests/directory_items_controller_spec.rb:88:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:271:in `block (2 levels) in <top (required)>'
# ./bundle/ruby/2.7.0/gems/webmock-3.11.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
When doing a user search (eg. when mentioning a user) we will not prioritie
users who hasn't been seen in over a year.
REFACTOR the user-search specs to be more precise regarding the ordering
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
- Only initialize the S3Helper when needed
- Skip initializing the S3Helper for S3Store#cdn_url
- Allow cook_url to be passed a `local` hint to skip unnecessary checks
These 2 indexes optimise performance on profile pages.
The summary page displays:
1. A list of "Top Link" - links sorted by number of clicks posted by user
2. A list of "Top Replies" - replies made by a user that go the most hearts
These two areas could devolve into full index or table scans, new indexes are there to avoid this cost on large dbs
One minor downside is that storage requirements go a tiny bit up to maintain the new indexes
* DEV: Remove with_deleted workarounds for old Rails version
These workarounds using private APIs are no longer required in the latest version of Rails. The referenced issue (https://github.com/rails/rails/issues/4306) was closed in 2013. The acts_as_paranoid workaround which this was based on was removed for rails > 5.
Switching to using a scope also allows us to use it within a `belongs_to` relation (e.g. in the Poll model). This avoids issues which can be caused by unscoping all `where` clauses.
Predicates are not necessarily strings, so calling `.join(" AND ")` can sometimes cause weird errors. If we use `WhereClause#ast`, and then `.to_sql` we achieve the same thing with fully public APIs, and it will work successfully for all predicates.
If we clear the in-process cache first, it might get re-filled from the
DB before we clear the DB cache. This would be more likely on high-traffic
sites.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
Being that system badges ship with every instance of Discourse, we've opted to define the name, description, and long description in our locales files to promote translation into other languages. When an admin visited the overview page of a system badge in their admin panel, they were met with disabled inputs for these text properties. The problem is that we failed to educate the admin that the text needs to be managed via the site text customization settings.
This change adds a small "Customize Text" link under theses inputs that takes the admin to the specific site text customization where they can make desired changes.
Notification is created by a job. If the job is evaluated before changes are committed to a database, a notification will have an incorrect URL.
Therefore, the job should be lodged in enqueue_jobs method which is triggered after the transaction:
```ruby
Topic.transaction do
move_posts_to topic
end
add_allowed_users(participants) if participants.present? && @move_to_pm
enqueue_jobs(topic)
```
I improved a little bit specs to ensure that the destination topic_id is set. However, that tests are passing even without code improvements. I couldn't find an easy way to "delay" database transaction.
Meta: https://meta.discourse.org/t/bug-with-notifications-for-moved-posts/168937
When the invite was being redeemed and the ReviewableUser record status
for the invited user was not pending an error was being raised.
This commit makes sure that we are only looking for ReviewableUser
record with status pending and updates that to approved.
On category create an exception will be thrown on this job because the
save transaction hasn't completed yet and the job cannot find the
category id. To prevent this we can use the rails 6 `after_save_commit`
hook that will fire after the category save transaction has finished for
both update and create actions.
Previously thumbnails were only preloaded for queries using `TopicQuery#default_results`, which meant that requests for PM topic lists would lead to N+1 queries.
This commit moves the preloading into TopicList#load_topics, along with other similar preloads (e.g. plugin custom fields)
The direct call to `ActiveRecord::Associations::Preloader#preload` is necessary because `@topics` can be an array, not an `ActiveRecord::Relation`
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
* FIX: Store Reviewable's force_review as a boolean.
Using the `force_review` flag raises the score to hit the minimum visibility threshold. This strategy turned out to be ineffective on sites with a high number of flags, where these values could rapidly fluctuate.
This change adds a `force_review` column on the reviewables table and modifies the `Reviewable#list_for` method to show these items when passing the `status: :pending` option, even if the score is not high enough. ReviewableQueuedPosts and ReviewableUsers are always created using this option.
Rapid concurrent SSO attempts is something that happens quite frequently
in the wild at large enough scale.
When this happens conditions such as adding a user to a group could possibly
fire concurrently causing a user to be added to the same group twice and
erroring out.
To avoid all concurrency issues here we protect with a coarse distributed
mutex. This heavily mitigates the risk around concurrent group additions and
concurrent updates to user related records.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
PostDestroyer should accept the option to permanently destroy post from the database. In addition, when the first post is destroyed it destroys the whole topic.
Currently, that feature is limited to private messages and creator of the post. It will be used by discourse-encrypt to explode encrypted private messages.
Ensure we do not respect max_tags_in_filter_list when showing the list of PM tags.
This filter is used on a full page view and there is not point limiting it to a small number.
The expectation is that PM tags are very rarely used, so a hard limit of 1000 should be safe for now.
