Disabling shared drafts used to leave topics in an inconsistent state
where they were not displayed as shared drafts and thus there was no
way of publishing them. Moreover, they were accessible just to users
who have permissions to create shared drafts.
This commit adds another permission check that is used for most
operations and the old can_create_shared_draft? remains used just when
creating a new shared draft.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
"I18n.t(key, locale: locale)" fails to find the correct translation in some cases. We should always wrap it with the "I18n.with_locale(locale)" method.
Also, reverting an override wasn't always possible because the serializer always used "I18n.locale" as the locale.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
As per @davidtaylorhq 's comment at 6e2be3e#r46069906, this fixes an oversight where if login_required is enabled and an anon user follows a confirm new email link they are forced to login, which is not what the intent of #10830 was.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
This results in some fun disasters if allowed to happen. For now, just issue an oblique error message; a localized message will be added on the client.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
It used to change the category of the topic, instead of the destination
category (topic.category_id instead of topic.shared_draft.category_id).
The shared drafts controls were displayed only if the current category
matched the 'shared drafts category', which was not true for shared
drafts that had their categories changed (affected by the previous bug).
Googlebot handles no-index headers very elegantly. It advises to leave as many routes as possible open and uses headers for high fidelity rules regarding indexes.
Discourse adds special `x-robot-tags` noindex headers to users, badges, groups, search and tag routes.
Following up on b52143feff we now have it so Googlebot gets special handling.
Rest of the crawlers get a far more aggressive disallow list to protect against excessive crawling.
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
25563357 moved the logout redirect logic from the client-side to the server-side. Unfortunately the login_required check was lost during the refactoring which meant that non-login-required sites would redirect to `/login` after redirect, and immediately restart the login process. Depending on the SSO implementation, that can make it impossible for users to log out cleanly.
This commit restores the login_required check, and prevents the potential redirect loop.
We should always hide user_id in response when `hide_email_address_taken` setting is enabled. Currently, it can be used to determine if the email was used or not.
This ensures that users are only served cached content in their own language. This commit also refactors to make use of the `Discourse.cache` framework rather than direct redis access
User directory items are sorted by some activity metric. If those metrics have the same value, postgres does not guarantee the order in which they will be returned. This can cause issues in pagination - some users may appear twice, and some may be missed. To illustrate
```
pry(main)> query = DirectoryItem.where(period_type: DirectoryItem.period_types[:weekly]).order(:likes_received).limit(50);
pry(main)> page1 = query.offset(0).pluck(:id);
pry(main)> page2 = query.offset(50).pluck(:id);
pry(main)> (page1 & page2).count # users on both pages
=> 29
```
If we use the primary key to tie-break matching metrics, things are much more reliable
```
pry(main)> query = DirectoryItem.where(period_type: DirectoryItem.period_types[:weekly]).order(:likes_received, :id).limit(50);
pry(main)> page1 = query.offset(0).pluck(:id);
pry(main)> page2 = query.offset(50).pluck(:id);
pry(main)> (page1 & page2).count # users on both pages
=> 0
```
This most commonly effects new sites where all the directory metrics are zero.
The fact that the ordering is indeterminate makes it difficult to write a reliable test case for this.
- Display reason for validation error when logging in via an authenticator
- Fix email validation handling for 'Discourse SSO', and add a spec
Previously, validation errors (e.g. blocked or already-taken emails) would raise a generic error with no useful information.
At the moment, when filtering by group, the directory will unconditionally return the current user at the top of the list. This is quite unexpected, given that the user is deliberately trying to filter the list. This commit makes sure the 'include current user' logic only triggers for unfiltered directories
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
Allowing the editing of remote themes has been something Discourse has advised against for some time. This commit removes the ability to edit or upload files to remote themes from Admin > Customize to enforce the recommended practice.
Previously, `/u/by-external/{id}` would only work for 'Discourse SSO' systems. This commit adds a new 'provider' parameter to the URL: `/u/by-external/{provider}/{id}`
This is compatible with all auth methods which have migrated to the 'ManagedAuthenticator' pattern. That includes all core providers, and also popular plugins such as discourse-oauth2-basic and discourse-openid-connect.
The new route is admin-only, since some authenticators use sensitive information like email addresses as the external id.
disable_search_queue_threshold needs to be coerced to a float so it is not
treated as a string when sub second values are provided.
Longer term fix is to possibly provide hints in the config so we do the
coersion automatically. However this would be a far more complex change.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Users could be silenced or suspended by two staff members at the same time and
would not be aware of it. This commit shows an error message if another penalty
has been applied.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
This reverts commit e3de45359f.
We need to improve out strategy by adding a cache breaker with this change ... some assets on CDNs and clients may have incorrect CORS headers which can cause stuff to break.
Previously if a onebox timed out we would not present the users in the log
with any information regarding the onebox. This makes it very difficult to
debug.
This adds url/topic/user in the debugging output.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
`BasicGroupSerializer` includes `flair_url` which uses `flair_upload` relation, so the N in N+1 in this case was the number of groups with flair in the forum.
Error messages for exceeded rate limits and invalid parameters always used the English locale instead of the default locale or the current user's locale.
The download link on the lightbox for images was not downloading the image if the upload was marked secure, because the code in the upload controller route was not respecting the dl=1 param for force download.
This PR fixes this so the download link works for secure images as well as regular ligthboxed images.
This allows administrators to stop automatic redirect to an external authenticator. It only takes effect when there is a single authentication method, and the site is login_required
When a category is removed from `auto_watch_category` we are removing
CategoryUser. However, there are still TopicUser with notification level
set to `watching` which was inherited from Category.
We should move them back to `regular` unless they were modified by a user.
These fields are required when using the UI and if `suspend_until`
params isn't used the user never is actually suspended so we should
require these fields when suspending a user.
This commit is addressing an issue where it is possible that there could
be multiple topic timer jobs running to close a topic or a weird race
condition state causing a topic that was just closed to be re-opened.
By removing the logic from the Topic Timer model into the Topic Timer
controller endpoint we isolate the code that is used for setting an
auto-open or an auto-close timer to just that functionality making the
topic timer background jobs safer if multiple are running.
Possibly in the future if we would like this logic back in the model a
refactor will be needed where we actually pass in the auto-close and
auto-open action instead of mixing it with the close and open
action that is currently being passed to the controller.
When someone wants to add > 1000 users at once they will hit a timeout.
Therefore, we should introduce limit and inform the user when limit is exceeded.
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
The category model already has a default value for `color` and
`text_color` so they don't need to be required via the API. The ember UI
already requires that colors be selected.
The name of the category also doesn't need to be required when updating
the category either because we are already passing in the id for the
category we want to change.
These changes improve the api experience because you no longer have to
lookup the category name, color, or text color before updating a single
category attribute. When creating a category the name is still required.
https://meta.discourse.org/t/-/132424/2
Adds functionality to reflect topic delete in Discourse to IMAP inbox (Gmail only for now) and reflecting Gmail deletes in Discourse.
Adding lots of tests, various refactors and code improvements.
When Discourse topic is destroyed in PostDestroyer mark the topic incoming email as imap_sync: true, and do the opposite when post is recovered.
The `/directory_items` route needs to have a .json url, but the rails
url helper `_path` doesn't return the format of the route.
I tried passing in a format options to `directory_items_path`. Which
works in the rails console
```
[8] pry(main)> directory_items_path(params.merge(:format => :json))
=> "/directory_items.json?page=1"
```
but when I added that some logic to the controller it comes out as
```
/directory_items?format=json&page=1
```
(which is actually how I expect it to work based on how you pass in the
format param). Anyways, because I couldn't figure out how to pass a
format to the `_path` helper I just used URI.parse to append `.json`
manually.
When a tab is open but left unattended for a while, the red, green, and blue
pills tend to go out of sync.
So whevener we open the notifications menu, we sync up the notification count
(eg. blue and green pills) with the server.
However, the reviewable count (eg. the red pill) is not a notification and
is located in the hamburger menu. This commit adds a new route on the server
side to retrieve the reviewable count for the current user and a ping
(refreshReviewableCount) from the client side to sync the reviewable count
whenever they open the hamburger menu.
REFACTOR: I also refactored the hamburger-menu widget code to prevent repetitive uses
of "this.".
PERF: I improved the performance of the 'notify_reviewable' job by doing only 1 query
to the database to retrieve all the pending reviewables and then tallying based on the
various rights.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
Apparently latest.json and latest.rss are not routed to the same
controller methods. This change allows for any passed in query
parameters to actually be applied to the rss route.
This came in as a request on meta:
https://meta.discourse.org/t/-/155812/6
Currently, we only reset `email_digests`, `email_level` and `email_messages_level` when the user wants to unsubscribe from all email.
`mailing_list_mode` should be reset as well
* DEV: Show message when cannot invite user to PM
When inviting a user to a PM return a message that says, "Sorry, this
user can't be invited." if they have been muted or are not in a users
allowed pm users list.
* Minor refactor & improved some text
There was a bug that even when `email_digest` was set to false but
`digest_after_minutes` was positive, we were not displaying correct
status.
In addition, the message is improved when the user is unsubscribed +
unsubscribe from all is hidden.
Before this commit if you were bulk removing group members and passed in
a user who wasn't currently a member of that group the whole request
would fail. This change will return a 200 response now listing the users
that were removed and those that were skipped.
This adds an option to "delete on owner reply" to bookmarks. If you select this option in the modal, then reply to the topic the bookmark is in, the bookmark will be deleted on reply.
This PR also changes the checkboxes for these additional bookmark options to an Integer column in the DB with a combobox to select the option you want.
The use cases are:
* Sometimes I will bookmark the topics to read it later. In this case we definitely don’t need to keep the bookmark after I replied to it.
* Sometimes I will read the topic in mobile and I will prefer to reply in PC later. Or I may have to do some research before reply. So I will bookmark it for reply later.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
Category and tag hashtags used to be handled differently even though
most of the code was very similar. This design was the root cause of
multiple issues related to hashtags.
This commit reduces the number of requests (just one and debounced
better), removes the use of CSS classes which marked resolved hashtags,
simplifies a lot of the code as there is a single source of truth and
previous race condition fixes are now useless.
It also includes a very minor security fix which let unauthorized users
to guess hidden tags.
* strip out the href and xlink:href attributes from use element that
are _not_ anchors in svgs which can be used for XSS
* adding the content-disposition: attachment ensures that
uploaded SVGs cannot be opened and executed using the XSS exploit.
svgs embedded using an img tag do not suffer from the same exploit
* FIX: Improve category hashtag lookup
This commit improves support for sub-sub-categories and does not include
the ID of the category in the slug, which fixes the composer preview.
* FIX: Sub-sub-categories can be mentioned using only two levels
* FIX: Remove support for three-level hashtags
* DEV: Simplify code
The previous fix (f43c0a5d85) wasn't working for images that were already uploaded.
The "metadata" (eg. 'for_*' and 'secure' attributes) were not added to existing uploads.
Also used 'Upload.get_from_url' is the admin/site_setting controller to properly retrieve
an upload from its URL.
Fixed the Upload::URL_REGEX to use the \h (hexadecimal) for the SHA
Follow-up-to: f43c0a5d85
* Change S3Helper::DOWNLOAD_URL_EXPIRES_AFTER_SECONDS to 5 minutes, which controls presigned URL expiry and secure-media route cache time.
* This is done because of the composer preview refreshing while typing causes a lot of requests sent to our server because of the short URL expiry. If this ends up being not enough we can always increase the time or explore other avenues (e.g. GitHub has a 7 day validity for secure URLs)
In 91c89df6, I fixed the onebox to support local topics with a slug-less URL.
This commit fixes all the other spots (search, topic links and user badges) where we look up for a local topic.
Follow-up-to: 91c89df6
* FEATURE: Don't display muted/ignored users under "who liked"
Previously, if you clicked on the heart icon below a post
it would show you the avatar for a user even if you ignored or muted
them.
This commit will instead display a (?) icon. The count of likes will
remain correct, but you needn't be reminded of the person you
preferred not to see.
* Use a circle instead of (?) for unknown user
There are two problems I'm trying to tackle here.
1. The site json is cached for anonymous users so readonly mode can be
cached for up to 30 minutes which makes it confusing.
2. We've already checked for readonly mode in the controller so having
to check for readonly mode again in `SiteSerializer` is adding an extra
Redis query on every request.
