This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
This PR adds functionality for the IMAP sync code to detect if a UID that is missing from the mail group mailbox is in the Spam/Junk folder for the mail account, and if so delete the associated Discourse topic. This is identical to what we do for emails that are moved for Trash.
If an email is missing but not in Spam or Trash, then we mark the incoming email record with imap_missing: true. This may be used in future to further filter or identify these emails, and perhaps go hunting for them in the email account in bulk.
Note: This adds some code duplication because the trash and spam email detection and handling is very similar. I intend to do more refactors/improvements to the IMAP sync code in time because there is a lot of room for improvement.
These 2 indexes optimise performance on profile pages.
The summary page displays:
1. A list of "Top Link" - links sorted by number of clicks posted by user
2. A list of "Top Replies" - replies made by a user that go the most hearts
These two areas could devolve into full index or table scans, new indexes are there to avoid this cost on large dbs
One minor downside is that storage requirements go a tiny bit up to maintain the new indexes
There have been production instances where the migrations has run but the records
that were meant to be deleted have not been deleted. The root cause is
unknown but the migration is safe and simple to re-run. The problem is
not reproducible locally so we're not spending too much time on digging
up the root. Time vs business cost tradeoff.
Follow-up fb15da43da
This will only happen if the user_associated_accounts table is currently empty. It's useful for people that may be depending on primary key values in data explorer queries. This change will only have an effect on sites which have not already run this migration.
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
* FIX: Store Reviewable's force_review as a boolean.
Using the `force_review` flag raises the score to hit the minimum visibility threshold. This strategy turned out to be ineffective on sites with a high number of flags, where these values could rapidly fluctuate.
This change adds a `force_review` column on the reviewables table and modifies the `Reviewable#list_for` method to show these items when passing the `status: :pending` option, even if the score is not high enough. ReviewableQueuedPosts and ReviewableUsers are always created using this option.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
This code is a no-op on all sites, even though it looks rather dangerous
this migration has long run prior to people trying exploit it.
That said ... hygiene here ... is not good.
Remove this legacy, we do not want it, even in historical migrations.
Previously, Jobs::EnqueueDigestEmails would enqueue a digest job for every user, even if there are no topics to send. The digest job would exit, no email would send, and last_emailed_at would not change. 30 minutes later, Jobs::EnqueueDigestEmails would run again and re-enqueue jobs for the same users.
120fa8ad introduced a temporary mitigation for this issue, by randomly selecting a subset of those users each time.
This commit adds a new `digest_attempted_at` column to the `user_stats` table. This column is updated every time a digest job completes for a user. Using this, we can avoid scheduling digest jobs for the same user every 30 minutes. This also removes the random user selection in 120fa8ad, and instead prioritizes users who had digests attempted the longest time ago.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
The reviewable was updated despite the user not being approved because a u.id = r.target_id condition is missing. It only affected user reviewables that were pending when the migration ran. Users were not auto-approved.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
On the topic view route we query for reviewables of each post in the stream,
using a query that filters on two unindexed columns. This results in a Parallel Seq Scan
over all rows, which can take quite some time (~20ms was seen) on forums with lots of flags
After index is added PostgreSQL planner opts for a simple Index Scan and runs in sub 1ms.
Before:
```
QUERY PLAN
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Finalize GroupAggregate (cost=11401.08..11404.87 rows=20 width=28) (actual time=19.209..19.209 rows=1 loops=1)
Group Key: r.target_id
-> Gather Merge (cost=11401.08..11404.41 rows=26 width=28) (actual time=19.202..20.419 rows=1 loops=1)
Workers Planned: 2
Workers Launched: 2
-> Partial GroupAggregate (cost=10401.06..10401.38 rows=13 width=28) (actual time=16.958..16.958 rows=0 loops=3)
Group Key: r.target_id
-> Sort (cost=10401.06..10401.09 rows=13 width=16) (actual time=16.956..16.956 rows=0 loops=3)
Sort Key: r.target_id
Sort Method: quicksort Memory: 25kB
Worker 0: Sort Method: quicksort Memory: 25kB
Worker 1: Sort Method: quicksort Memory: 25kB
-> Nested Loop (cost=0.42..10400.82 rows=13 width=16) (actual time=15.894..16.938 rows=0 loops=3)
-> Parallel Seq Scan on reviewables r (cost=0.00..10302.47 rows=8 width=12) (actual time=15.882..16.927 rows=0 loops=3)
Filter: (((target_type)::text = 'Post'::text) AND (target_id = ANY ('{7565483,7565563,7565566,7565567,7565568,7565569,7565579,7565580,7565583,7565586,7565588,7565589,7565601,7565602,7565603,7565613,7565620,7565623,7565624,7565626}'::integer[])))
Rows Removed by Filter: 49183
-> Index Scan using index_reviewable_scores_on_reviewable_id on reviewable_scores s (cost=0.42..12.27 rows=2 width=8) (actual time=0.029..0.030 rows=1 loops=1)
Index Cond: (reviewable_id = r.id)
Planning Time: 0.318 ms
Execution Time: 20.470 ms
```
After:
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GroupAggregate (cost=0.84..342.54 rows=20 width=28) (actual time=0.038..0.038 rows=1 loops=1)
Group Key: r.target_id
-> Nested Loop (cost=0.84..341.95 rows=31 width=16) (actual time=0.020..0.033 rows=1 loops=1)
-> Index Scan using index_reviewables_on_target_id on reviewables r (cost=0.42..96.07 rows=20 width=12) (actual time=0.013..0.026 rows=1 loops=1)
Index Cond: (target_id = ANY ('{7565483,7565563,7565566,7565567,7565568,7565569,7565579,7565580,7565583,7565586,7565588,7565589,7565601,7565602,7565603,7565613,7565620,7565623,7565624,7565626}'::integer[]))
-> Index Scan using index_reviewable_scores_on_reviewable_id on reviewable_scores s (cost=0.42..12.27 rows=2 width=8) (actual time=0.005..0.005 rows=1 loops=1)
Index Cond: (reviewable_id = r.id)
Planning Time: 0.253 ms
Execution Time: 0.067 ms
```
The problem with this index is that on sites with a high non-pm to pm
posts ratio, the index is esstentially duplicating the existing index on
`PostSearchData#search_data`. If the site is huge, the index ends up
taking up more diskspace.
Very large batches can take an enormous amount of time due to churn
Limiting to 200k changes at a time gives us a far larger chance of finishing
the job without timing out or deadlocking.
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
A giant transaction in a post migration can be very risky.
This splits the large amount of work this migration needs to do into 2 parts:
1. A re-runnable cleanup job prior to transaction
2. A minimally sized transaction to add the database constraint
This avoids large amounts of churn on the table
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
When we run the S3 inventory, mark uploads that exist as verified true, those that don't as verified false, and uploads not included in the check / not yet checked as verified nil.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
Adds a imap_group_id column to IncomingEmail to deal with an issue where we were trying to update emails in the mailbox, calling IncomingEmail.where(imap_sync: true). However UID and UIDVALIDITY could be the same across accounts. So if group A used IMAP details for Gmail account A, and group B used IMAP details for Gmail account B, and both tried to sync changes to an email with UID of 3 (e.g. changing Labels), one account could affect the other. This even applied to Archiving!
Also in this PR:
* Fix error occurring if we do a uid_fetch and no emails are returned
* Allow for creating labels within the target mailbox (previously we would not do this, only use existing labels)
* Improve consistency for log messages
* Add specs for generic IMAP provider (Gmail specs still to come)
* Add custom archiving support for Gmail
* Only use Message-ID for uniqueness of IncomingEmail if it was generated by us
* Various refactors and improvements
For the following conditions, the TopicUser.bookmarked column was not updated correctly:
* When a bookmark was auto-deleted because the reminder was sent
* When a bookmark was auto-deleted because the owner of the bookmark replied to the topic
This adds another migration to fix the out-of-sync column and also some refactors to BookmarkManager to allow for more of these delete cases. BookmarkManager is used instead of directly destroying the bookmark in PostCreator and BookmarkReminderNotificationHandler.
Because previous migration was already deployed and some databases were already migrated, I needed to add some conditions to the migration.
Previous migration - https://github.com/discourse/discourse/blob/master/db/post_migrate/20200629232159_rename_path_whitelist_to_allowed_paths.rb
What will happen in a scenario when previous migration was not run.
1. column allowed_paths will be created
2. allowed_path will be populated with data from path_whitelist
3. path_whitelist column will be dropped
What will happen in a scenario when previous migration was already run.
1. column allowed_paths will not be created because already exists - `unless column_exists?(:embeddable_hosts, :allowed_paths)`
2. Data will not be copied because path_whitelist is missing - `if column_exists?(:embeddable_hosts, :path_whitelist) && column_exists?(:embeddable_hosts, :allowed_paths)`
3. path_whitelist column deletion will be skipped - `if column_exists?(:embeddable_hosts, :path_whitelist)`
This adds an option to "delete on owner reply" to bookmarks. If you select this option in the modal, then reply to the topic the bookmark is in, the bookmark will be deleted on reply.
This PR also changes the checkboxes for these additional bookmark options to an Integer column in the DB with a combobox to select the option you want.
The use cases are:
* Sometimes I will bookmark the topics to read it later. In this case we definitely don’t need to keep the bookmark after I replied to it.
* Sometimes I will read the topic in mobile and I will prefer to reply in PC later. Or I may have to do some research before reply. So I will bookmark it for reply later.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
* Remove unneeded bookmark name index.
* Change bookmark search query to use post_search_data. This allows searching on topic title and post content
* Tweak the style/layout of the bookmark list so the search looks better and the whole page fits better on mobile.
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
Follow up to https://github.com/discourse/discourse/pull/10188/files
There are still TopicUser records where bookmarked is true even though there are no Bookmark or PostAction records with the type of bookmark for the associated topic and user. This migration corrects this issue by setting bookmarked to false for these cases.
We have a couple of examples of enormous amounts of text being entered in the name column of bookmarks. This is not desirable...it is just meant to be a short note / reminder of why you bookmarked this.
This PR caps the column at 100 characters and truncates existing names in the database to 100 characters.
* This is causing issues where sometimes bookmarked is out of sync with what is in the Bookmark table. The BookmarkManager handles updating this column now.
* Add migration to fix bookmarked column that is incorrectly marked false when a Bookmark record exists.
A future-dated migration was accidently introduced by me in 45c399f0. This was removed in b9762afc, but other migrations had already been generated based on its incorrect date. This commit removes the offending data in the schema_migrations table, and corrects the version in the published_pages migration.
This commit also adds a check to db:migrate which raises an error when invalid migration timestamps are used.
Badge and user_badge tables were created using add_column index: true
When the migration was written, `index: true` was a no-op for non-reference columns
Since then, rails made it work 9a0d35e820
This migration adds the index to very old sites, so that we have a consistent state
This is a no-op for modern installations. It only affects older sites.
Follow-up to f7d676dce1
This needs to be done in a transaction, because we need to drop and recreate the badge_posts view.
This migration was added to master temporarily, then removed. This resulted in some sites being in an inconsistent state. Adding the migration back for now. If we decide the column is unneeded, then we should add a second migration to remove the column.
This reverts part of commit e1af91f5ae.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* FIX: Emit web hooks for flags
* FEATURE: Remove 'flag' web hook in favor of 'reviewable' web hook
* FEATURE: Remove 'queued post' web hook in favor of 'reviewable' web hook
* FIX: Do not set a default value for web hooks with no events
* the post_actions table has no FK to users, so if a user has been
deleted we may end up with dangling post_action records, which then
interferes with the bookmarks migration because bookmarks DO have
an FK to users
* PERF: Dematerialize topic_reply_count
It's only ever used for trust level promotions that run daily, or compared to 0. We don't need to track it on every post creation.
* UX: Add symbol in TL3 report if topic reply count is capped
* DEV: Drop user_stats.topic_reply_count column
It was using ActiveRecord which broke migrating a new site. The groups
table now has a unique constraint on group name so this migration from
2014 should not be necessary anymore.
Previously we only changed sequence on ownership change, this
cause a race condition between tabs where user could type for a
long time without being warned of an out of date draft.
This change is a radical change and we should watch closely.
Code was already in place to track sequence on the client so no
changes are needed there.
posts and topics tables can be huge, this migration change
ensures the migration performs less work in one giant transaction
reducing risk of deadlocks
Migration is re-runnable thanks to NOT EXISTS checks
We now show an options gear icon next to the bookmark name.
When expanded we show the "delete bookmark when reminder sent" option. The value of this checkbox is saved in local storage for the user.
If this is ticked, when a reminder is sent for the bookmark the bookmark itself is deleted. This is so people can use the reminder functionality by itself.
Also remove the blue alert reminder section from the "Edit Bookmark" modal as it just added clutter, because the user can already see they had a reminder set:
Adds a default false boolean column `delete_when_reminder_sent` to bookmarks.
When using pgbouncer without a transaction, it's possible for the connection to change between statements in a migration. Instead, create a real table, and drop it when the migration is finished
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
* FEATURE: add category banner for why a user cannot post
Adds a category banner for why a user is unable to post in a category.
Also adds an extra alert for the user when a user is unable to create a topic in a
category and they still try and click on the disabled-looking new topic
button.
We need to recreate the badge_posts view each time we change
column on the posts table.
The p.* is auto expanded on view create, cascade should not have
been used
avg_time on posts and topics have not been used in a year.
This uses a re-runnable ddl transaction diasabled migration to
drop the column, cause it touchs very high traffic table and may
deadlock
* Rename all instances of bookmarkWithReminder and bookmark_with_reminder to just bookmark
* Delete old bookmark code at the same time
* Add migration to remove the bookmarkWithReminder post menu item if people have it set in site settings
Make sure the topic_user.bookmarked column is set correctly when user bookmarks/unbookmarks any post in a topic. For example, you bookmarked a post in the topic that was not the OP, the bookmark icon in the topic list would not be shown. Same if deleting a bookmark for the last bookmarked post in a topic, the bookmark icon in the topic list would not be removed.
Previously this was only setting it to true if bookmarking the OP/topic, which was not correct -- we want to show the icon on the topic list if any post is bookmarked.
Also set to false if unbookmarking the last bookmarked post in the topic.
Also in this PR is a migration to correct any out of sync topic_user.bookmarked columns, based on the new logic.
This reverts commit 6f9177e2ed.
We decided on a completely different approach to the problem.
Instead we will let blocked emails be treated as canonical.
The main thrust of this PR is to take all the conditional checks based on the `enable_bookmarks_with_reminders` away and only keep the code from the `true` path, making bookmarks with reminders the core bookmarks feature. There is also a migration to create `Bookmark` records out of `PostAction` bookmarks for a site.
### Summary
* Remove logic based on whether enable_bookmarks_with_reminders is true. This site setting is now obsolete, the old bookmark functionality is being removed. Retain the setting and set the value to `true` in a migration.
* Use the code from the rake task to create a database migration that creates bookmarks from post actions.
* Change the bookmark report to read from the new table.
* Get rid of old endpoints for bookmarks
* Link to the new bookmarks list from the user summary page
* FEATURE: Add created_at column to user_badges
This makes scraping for newly granted badges easier.
Patch from @eviltrout applied.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
In development and test mode you don't care about email domains. Now
that `rake db:migrate` outputs a lot less this felt like an error when
it's really a warning.
The new `enforce_canonical_emails` site setting ensures that emails in the
canonical form are unique.
This mean that if `s.a.m+1@gmail.com` is registered `sam@gmail.com` will
not be allowed.
The commit contains a blanket "tag strip" (stripping everything after +)
it also contains special handling of a "dot strip" for googlemail and gmail.
The setting only impacts new registrations after `enforce_canonical_emails`
The setting is default false so it will not impact any existing installs.
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
Some DBs failed on this migration, possibly due to new records being added, with the error
ActiveRecord::NotNullViolation: PG::NotNullViolation: ERROR: column "high_priority" contains null values
Luckily, the migration is retryable as is.
Introduce the concept of "high priority notifications" which include PM and bookmark reminder notifications. Now bookmark reminder notifications act in the same way as PM notifications (float to top of recent list, show in the green bubble) and most instances of unread_private_messages in the UI have been replaced with unread_high_priority_notifications.
The user email digest is changed to just have a section about unread high priority notifications, the unread PM section has been removed.
A high_priority boolean column has been added to the Notification table and relevant indices added to account for it.
unread_private_messages has been kept on the User model purely for backwards compat, but now just returns unread_high_priority_notifications count so this may cause some inconsistencies in the UI.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
There are three modifiers:
- serialize_topic_excerpts (boolean)
- csp_extensions (array of strings)
- svg_icons (array of strings)
When multiple themes are active, the values will be combined. The combination method varies based on the setting. CSP/SVG arrays will be combined. serialize_topic_excerpts will use `Enumerable#any`.
* DEV: Reserve webhook event types to be used in plugins
Based on feedback on the following PR's:
https://github.com/discourse/discourse-solved/pull/85https://github.com/discourse/discourse-assign/pull/61
This commit reserves ID's to be used for webhook event types to ensure
that some other webhook or plugin doesn't end up using the same ID.
* Fix broken test
I don't think this test has to test ALL event types to verify that this
feature is working. Now that we added some event types that plugins are
using this test was failing for missing fabricators that exist in the
respective plugins.
* remove loop and just test first record
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
This syncs the value of the `reply_id` column into the `reply_post_id` column until all servers have been deployed and the post migrations ran.
Follow-up to ab07b945c2
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
Note: All of this functionality is hidden behind a hidden, default false, site setting called `enable_bookmarks_with_reminders`. Also, any feedback on Ember code would be greatly appreciated!
This is part 1 of the bookmark improvements. The next PR will address the backend logic to send reminder notifications for bookmarked posts to users. This PR adds the following functionality:
* We are adding a new `bookmarks` table and `Bookmark` model to make the bookmarks a first-class citizen and to allow attaching reminders to them.
* Posts now have a new button in their actions menu that has the icon of an actual book
* Clicking the button opens the new bookmark modal.
* Both name and the reminder type are optional.
* If you close the modal without doing anything, the bookmark is saved with no reminder.
* If you click the Cancel button, no bookmark is saved at all.
* All of the reminder type tiles are dynamic and the times they show will be based on your user timezone set in your profile (this should already be set for you).
* If for some reason a user does not have their timezone set they will not be able to set a reminder, but they will still be able to create a bookmark.
* A bookmark can be deleted by clicking on the book icon again which will be red if the post is bookmarked.
This PR does NOT do anything to migrate or change existing bookmarks in the form of `PostActions`, the two features live side-by-side here. Also this does nothing to the topic bookmarking.
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
Previously our index was non unique, causing situations where a user could
have multiple drafts stored in the table for the same exact entity.
This does not properly reflect reality and needed to change as in certain
cases duplicate drafts could be created causing internal data inconsistency
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This ensures we can very quickly figure out which topics are banners if
a banner is set.
Previously you would have to scan an entire table to find banners
In a category's settings, the Tags tab has two new fields to
specify the number of tags that must be added to a topic
from a tag group. When creating a new topic, an error will be
shown to the user if the requirement isn't met.
This is a major change to draft internals. Previously there were quite a
few cases where the draft system would say "draft saved", when in fact
we just skipped saving.
This commit ensures the draft system deals with draft ownership handover in
a predictable way.
For example:
- Window 1 editing draft
- Window 2 editing same draft at the same time
Previously we would allow window 1 and 2 to just fight on the same draft
each window overwriting the same draft over an over.
This commit introduces an ownership concept where either window 1 or 2 win
and user is prompted on the loser window to reload screen to correct the issue
This also corrects edge cases where a user could have multiple browser windows
open and posts in 1 window, later to post in the second window. Previously
drafts would break in the second window, this corrects it.
Certain DBs have duplicates already, if we want to ensure uniqueness here
we need to decide first how to clean up existing data and confirm all the
plugins expect this.
Under exceptional situations the automatic draft feature can fail.
This new **hidden, default off** site setting
`backup_drafts_to_pm_length` will automatically backup any draft that is
saved by the system to a dedicated PM (originating from self)
The body of that PM will contain the text of the reply.
We can enable this feature strategically on sites exhibiting issues to
diagnose issues with the draft system and offer a recourse to users who
appear to lose drafts. We automatically checkpoint these drafts every 5
minutes forcing a new revision each 5 minutes so you can revert to old
content.
Longer term we are considering automatically enabling this kind of feature
for extremely long drafts where the risk is really high one could lose
days of writing.
Slugs can be the empty string, but the added index didn't account for
that. This commit changes the migration, stopping it from being unique
so that it can be applied everywhere and adds another migration that
recreates the index properly.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
* Adjustments to pass specs on Rails 6.0.0
* Use classic autoloader instead of Zeitwerk
* Update Rails 6.0.0 deprecated methods
* Rails 6.0.0 not allowing column with integer name
* Drop freedom_patches/rails6.rb
* Default value for trigger_transactional_callbacks? is true
* Bump rspec-rails version to 4.0.0.beta2
If a user amended edit_time_limit keep the behavior as is, instead of introducing a potentially tighter time for tl2 edit time than what they had set in the past.
Start tracking the date an api key was last used. This has already been
the case for user_api_keys.
This information can provide us with the ability to automatically expire
unused api keys after N days.
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
If enabled, this will fire a webhook whenever a user's notification has
been created. This could potentially be a lot of data depending on your
forum, and should be used carefully since it includes everything all users
will see in their feeds.
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
Temporarily recreate already dropped functions in the discourse_functions schema in order to allow restoring of backups which still reference dropped functions.
* REFACTOR: Rename SiteSetting.disable_edit_notifications to disable_system_edit_notifications
- The older name could cause some confusion because the setting does not disable all edit notifications, only system ones.
* FIX: Add frozen_string_literal: true in the migration
* DEV: Deprecate 'disable_edit_notifications'
* DEV: group_list site settings should store IDs instead of group names
* Ship site setting to know when we should migrate group_list settings
* Migrate existing group_list site settings
* Bump migration timestamp and don't set null when migrating is not possible.
DEV: deprecate `invite.via_email` in favor of `invite.emailed_status`
This commit adds a new column `emailed_status` in `invites` table for
tracking email sending status.
0 - not required
1 - pending
2 - bulk pending
3 - sending
4 - sent
For normal email invites, invite record is created with emailed_status
set to 'pending'.
When bulk invites are sent invite record is created with emailed_status
set to 'bulk pending'.
For invites that generates link, invite record is created with
emailed_status set to 'not required'.
When invite email is in queue emailed_status is updated to 'sending'
Once the email is sent via `InviteEmail` job the invite emailed_status
is updated to 'sent'.
- adds a migration renaming FA4 icon names in badges
- allows all icons to be used in badges (previously was limited to icons prefixed with fa-)
- renames remaining FA 4.7 icons equivalents
In order for this to work the Backuper stores a couple of site settings
in the new backup_metadata table, because the old setting values might
not be available on restore anymore.
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
This allows you to temporarily disable components without having to remove them from a theme.
This feature is very handy when doing quick fix engineering.
Adds a second factor landing page that centralizes a user's second factor configuration.
This contains both TOTP and Backup, and also allows multiple TOTP tokens to be registered and organized by a name. Access to this page is authenticated via password, and cached for 30 minutes via a secure session.
* Remove unused method
* Prefabricate user in category_user_spec.rb
* FIX: Remove notification_level from category_users unique indexes
* FIX: CategoryUser#batch_set wasn't updating pre-existing records
* Improve tests for CategoryUser#batch_set
* FIX: changed was being reported incorrectly
* DEV: Rewrote query to do a bulk insert
* DEV: remove unnecessary parentheses
You can now add javascript files under `/javascripts/*` in a theme, and they will be loaded as if they were included in core, or a plugin. If you give something the same name as a core/plugin file, it will be overridden. Support file extensions are `.js.es6`, `.hbs` and `.raw.hbs`.
This feature allows end users to "defer" topics by marking them unread
The functionality is default disabled. This also introduces the new site
setting default_other_enable_defer: to enable this by default on new user
accounts.
Previously we used custom fields to denote a user was anonymous, this was
risky in that custom fields are prone to race conditions and are not
properly dedicated, missing constraints and so on.
The new table `anonymous_users` is properly protected. There is only one
possible shadow account per user, which is enforced using a constraint.
Every anonymous user will have a unique row in the new table.
The migration for the ToS signup field happend in 2014. Everyone who hasn't updated yet needs to live with the English text "Terms of Service". There's no need to keep these unused translations forever.
User.publish_notifications_state is called every time a notification is
created, this can become a very critical code path.
On some heavy notification related sites this can be a major CPU user on PG
This index makes it much cheaper to publish notification state, cause a
simple index lookup does the trick.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
This is a feature that used to be present in discourse-assign but is
much easier to implement in core. It also allows a topic to be assigned
without it claiming for review and vice versa and allows it to work with
category group reviewers.
This change shows a notification number besides the flag icon in the
post menu if there is reviewable content associated with the post.
Additionally, if there is pending stuff to review, the icon has a red
background.
We have also removed the list of links below a post with the flag
status. A reviewer is meant to click the number beside the flag icon to
view the flags. As a consequence of losing those links, we've removed
the ability to undo or ignore flags below a post.
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
This is a regression as a result of 7896c74c2b. Most instances would have ran the migrations and some might have run this migration with the incorrect query. Impact of this is small for now but I'm fixing this for correctness purposes.
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
All these columns must never include duplicates for a single post
otherwise code breaks. All are defined in post.rb in the top in constants
but we usually prefer not to ref constants in case they change and migration
becomes inconsistent.
This commit adds some improvements to native app banners for iOS and Android
- iOS and Android now have separate settings for native app banners
- app banners will now only show for users on TL1 and up
- app ids are now in a hidden site setting to allow sites to switch to their own app, if desired
- iOS only: the site URL is passed to the app arguments
A scheduled job runs `Post.rebake_old` with a limit of 80 which does a
look up for the latest posts that have not been baked to the latest
version. Before this commit, the query would run using the primary key's
index and does a reverse scan. However the query performance quicky
becomes bad as more and more of the latest posts have been baked to the
latest version.
This optimisation avoids large scans joining the topics table with the
topic_users table.
Previously when a user carried a lot of read state we would have to join
the entire read state with the topics table. This operation would slow down
home page and every topic page. The more read state you accumulated the
larger the impact.
The optimisation helps people who clean up unread, however if you carry
unread from years ago it will only have minimal impact.
A new checkbox has been added to the Tags tab of the category settings modal
which is used when some tags and/or tag groups are restricted to the category,
and all other unrestricted tags should also be allowed.
Default is the same as the previous behaviour: only allow the specified set of
tags and tag groups in the category.
"Rejecting" a user in the queue is equivalent to deleting them, which
would then making it impossible to review rejected users. Now we store
information about the user in the payload so if they are deleted things
still display in the Rejected view.
Secondly, if a user is destroyed outside of the review queue, it will
now automatically "Reject" that queue item.
Conversely, if a user is deactivated the reviewable should automatically
be rejected.
Before this fix, if a user was not active they'd still show in the
review queue but without an "Approve" button which was confusing.
This functionality was never supported but before the new review queue
it didn't have any errors. Now the combination of settings is prevented
and existing sites with sso enabled will be migrated to remove invite
only.
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
- s3_force_path_style was added as a Minio specific url scheme but it has never been well supported in our code base.
- Our new migrate_to_s3 rake task does not work reliably with path style urls too
- Minio has also added support for virtual style requests i.e the same scheme as AWS S3/DO Spaces so we can rely on that instead of using path style requests.
- Add migration to drop s3_force_path_style from the site_settings table
Migrates email user options to a new data structure, where `email_always`, `email_direct` and `email_private_messages` are replace by
* `email_messages_level`, with options: `always`, `only_when_away` and `never` (defaults to `always`)
* `email_level`, with options: `always`, `only_when_away` and `never` (defaults to `only_when_away`)
Previous instagram records didn’t have unique index, as a result it's seems like in some cases we have duplicate ids, which is causing issues with the associated_accounts which does have unique index.
It's sorted by `updated_at DESC` on the thought that the most recent one is more likely to be the one we want to keep.
For some reason, setting a text site setting to empty in the past can
result in either an empty string or null as the value. This migration
is a follow up to 1981add261.
If the depercated SiteSetting.logo_url was set to "" previously, it will
not have been migrated by the onceoff job which we added. As such, we
need a migration to migrate the blank override so that the default for
certain upload site settings will not be used.
* FEATURE: Add `IgnoredUsersSummary` daily job
## Why?
This is part of the [Ability to ignore a user feature](https://meta.discourse.org/t/ability-to-ignore-a-user/110254/8).
We want to:
1. Send an automatic group PM that goes out to moderators
2. When {x} users have Ignored the same user, threshold defined by a site setting, default of 5
3. Only send this message every X days which is defined by another site setting
* Adds warnings to the "Edit Category" dialog
* Doesn't hide the "Security" tab on the "Edit Category" dialog anymore. Instead, it shows an explanation why permissions can't be changed.
* Makes the category name translatable
* Hides the category name from the edit dialog (it can be customized by overriding the translation)
* Creates a translation override if the category has been renamed in the past
Generally we should never be touching AR objects in migrations, this is
super risky as we may end up with invalid schema cache.
This code from 2013 did it unconditionally. This change amends it so:
1. We only load up schema if we have no choice
2. We flush the cache before and after
This makes this migration far less risky.
This commit copies `login_required.welcome_message` translation override to `login_required.welcome_message_invite_only` if the `login_required.welcome_message_invite_only` override is blank. This is done so as to ensure that login page customization remains same after [this commit](93eb0a0690).
New `about.json` fields (all optional):
- `authors`: An arbitrary string describing the theme authors
- `theme_version`: An arbitrary string describing the theme version
- `minimum_discourse_version`: Theme will be auto-disabled for lower versions. Must be a valid version descriptor.
- `maximum_discourse_version`: Theme will be auto-disabled for lower versions. Must be a valid version descriptor.
A localized description for a theme can be provided in the language files under the `theme_metadata.description` key
The admin UI has been re-arranged to display this new information, and give more prominence to the remote theme options.
Some badges always appeared in the "Other" group (the default group) and some badges were always moved back into the original group during seeding.
Now badges are either in the correct, seeded group or stay in a custom group if the admin moved the badge into a custom group.
- Themes can supply translation files in a format like `/locales/{locale}.yml`. These files should be valid YAML, with a single top level key equal to the locale being defined. For now these can only be defined using the `discourse_theme` CLI, importing a `.tar.gz`, or from a GIT repository.
- Fallback is handled on a global level (if the locale is not defined in the theme), as well as on individual keys (if some keys are missing from the selected interface language).
- Administrators can override individual keys on a per-theme basis in the /admin/customize/themes user interface.
- Theme developers should access defined translations using the new theme prefix variables:
JavaScript: `I18n.t(themePrefix("my_translation_key"))`
Handlebars: `{{theme-i18n "my_translation_key"}}` or `{{i18n (theme-prefix "my_translation_key")}}`
- To design for backwards compatibility, theme developers can check for the presence of the `themePrefix` variable in JavaScript
- As part of this, the old `{{themeSetting.setting_name}}` syntax is deprecated in favour of `{{theme-setting "setting_name"}}`
- adds migration to enable CSP for new sites
- removes "EXPERIMENTAL" labels from setting names
- sets CSP violation report to default off
- adds CSP-related note to GTM setting
We query this table when getting composer messages with the queries
such as:
```
SELECT 1 AS one FROM "user_histories"
WHERE "user_histories"."target_user_id" = 1 AND
"user_histories"."action" = 9 AND
"user_histories"."topic_id" = 105794
LIMIT 1
```
This index ensures this query remains very quick, regardless of user
history size.
This was done to pick up 3 changes
1. New pngquant which will result in much smaller images
2. Placeholder images which are missing from old posts
3. Retina images missing from old posts
Also picks up on Image Magick upgrade which slightly alters resize algorithm.
Rebake trickles per: `rebake_old_posts_count` site setting. (100 per 15 minutes)
Previously we had no idea what algorithm generated thumbnails, this starts tracking the version.
We also bumped up the version to force all optimized images to be generated. This is important cause we recently introduced pngquant which results in much smaller images.
Do not send an activation email to users invited via email. They
already confirmed their email address by clicking the invite link.
Users invited via link will need to confirm their email address before
they can login.
Changes to functionality
- Removed syncing of user metadata including gender, location etc.
These are no longer available to standard Facebook applications.
- Removed the remote 'revoke' functionality. No other providers have
it, and it does not appear to be standard practice in other apps.
- The 'facebook_no_email' event is no longer logged. The system can
cope fine with a missing email address.
Data is migrated to the new user_associated_accounts table.
facebook_user_infos can be dropped once we are confident the data has
been migrated successfully.
A generic implementation of Auth::Authenticator which stores data in the
new UserAssociatedAccount model. This should help significantly reduce the duplicated
logic across different auth providers.
* Doing it in a post migration was a bad idea
because the migration will fail if the site
is down while trying to download uploads
which points to the instance. This mainly
affects self-hosters using `discourse_docker`
where `./launcher rebuild` will take the
existing container down.
This splits off the logic between SSO keys used incoming vs outgoing, it allows to far better restrict who is allowed to log in using a site.
This allows for better auditing of the SSO provider feature
* FEATURE: add branch option to remote theme import
* FIX: Add missing variable in params
* FIX: Add missing param for import_theme method
* SPEC: Add test methods for branch support in git import
* FIX: Add missing space to scss style
* Do not assume default branch as master
* Change branch field placeholder
* FIX: add missing div start tag
This moves us away from the delayed drops pattern which
was problematic on two counts. First, it uses a hardcoded "delay for"
duration which may be too short for certain deployment strategies.
Second, delayed drop doesn't ensure that it only runs after
the latest application code has been deployed. If the migration runs
and the application code fails to deploy, running the migration after
"delay for" has been met will cause the application to blow up.
The new strategy allows post deployment migrations to be skipped if the
env `SKIP_POST_DEPLOYMENT_MIGRATIONS` is provided.
```
SKIP_POST_DEPLOYMENT_MIGRATIONS=1 rake db:migrate
-> deploy app servers
SKIP_POST_DEPLOYMENT_MIGRATIONS=0 rake db:migrate
```
To aid with the generation of a post deployment migration, a generator
has been added. Simply run `rails generate post_migration`.
