* FEATURE: Show similar users when penalizing a user
Moderators will be notified if other users with the same IP address
exist before penalizing a user.
* FEATURE: Allow staff to penalize multiple users
This allows staff members to suspend or silence multiple users belonging
to the same person.
Previously if a specific plugin route was not available (e.g. there was an error loading the plugin's JS due to an ad blocker), the entire page would fail to load. This commit updates the behavior to catch this kind of issue and display a user-friendly message at the top of the screen.
Lone hbs files in the `/components` are automatically assumed to be template-only Glimmer components. The `templateOnly()` stub is only required when templates are in the `/templates/components` directory.
This PR enables the [`no-action-modifiers`](https://github.com/ember-template-lint/ember-template-lint/blob/master/docs/rule/no-action-modifiers.md) template lint rule and removes all usages of the `{{action}}` modifier in core.
In general, instances of `{{action "x"}}` have been replaced with `{{on "click" (action "x")}}`.
In many cases, such as for `a` elements, we also need to prevent default event handling to avoid unwanted side effects. While the `{{action}}` modifier internally calls `event.preventDefault()`, we need to handle these cases more explicitly. For this purpose, this PR also adds the [ember-event-helpers](https://github.com/buschtoens/ember-event-helpers) dependency so we can use the `prevent-default` handler. For instance:
```
<a href {{on "click" (prevent-default (action "x"))}}>Do X</a>
```
Note that `action` has not in general been refactored away as a helper yet. In general, all event handlers should be methods on the corresponding component and referenced directly (e.g. `{{on "click" this.doSomething}}`). However, the `action` helper is used extensively throughout the codebase and often references methods in the `actions` hash on controllers or routes. Thus this refactor will also be extensive and probably deserves a separate PR.
Note: This work was done to complement #17767 by minimizing the potential impact of the `action` modifier override, which uses private API and arguably should be replaced with an AST transform.
This is a followup to #18333, which had to be reverted because it did not account for the default treatment of modifier keys by the {{action}} modifier.
Commits:
* Enable `no-action-modifiers` template lint rule
* Replace {{action "x"}} with {{on "click" (action "x")}}
* Remove unnecessary action helper usage
* Remove ctl+click tests for user-menu
These tests now break in Chrome when used with addEventListener. As per the comment, they can probably be safely removed.
* Prevent default event handlers to avoid unwanted side effects
Uses `event.preventDefault()` in event handlers to prevent default event handling. This had been done automatically by the `action` modifier, but is not always desirable or necessary.
* Restore UserCardContents#showUser action to avoid regression
By keeping the `showUser` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showUser` argument that's been passed.
* Revert EditCategoryTab#selectTab -> EditCategoryTab#select
Avoid potential breaking change in themes / plugins
* Restore GroupCardContents#showGroup action to avoid regression
By keeping the `showGroup` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showGroup` argument that's been passed.
* Restore SecondFactorAddTotp#showSecondFactorKey action to avoid regression
By keeping the `showSecondFactorKey` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showSecondFactorKey` property that's maintained on the controller.
* Refactor away from `actions` hash in ChooseMessage component
* Modernize EmojiPicker#onCategorySelection usage
* Modernize SearchResultEntry#logClick usage
* Modernize Discovery::Categories#showInserted usage
* Modernize Preferences::Account#resendConfirmationEmail usage
* Modernize MultiSelect::SelectedCategory#onSelectedNameClick usage
* Favor fn over action in SelectedChoice component
* Modernize WizardStep event handlers
* Favor fn over action usage in buttons
* Restore Login#forgotPassword action to avoid possible regression
* Introduce modKeysPressed utility
Returns an array of modifier keys that are pressed during a given `MouseEvent` or `KeyboardEvent`.
* Don't interfere with click events on links with `href` values when modifier keys are pressed
This PR enables the [`no-action-modifiers`](https://github.com/ember-template-lint/ember-template-lint/blob/master/docs/rule/no-action-modifiers.md) template lint rule and removes all usages of the `{{action}}` modifier in core.
In general, instances of `{{action "x"}}` have been replaced with `{{on "click" (action "x")}}`.
In many cases, such as for `a` elements, we also need to prevent default event handling to avoid unwanted side effects. While the `{{action}}` modifier internally calls `event.preventDefault()`, we need to handle these cases more explicitly. For this purpose, this PR also adds the [ember-event-helpers](https://github.com/buschtoens/ember-event-helpers) dependency so we can use the `prevent-default` handler. For instance:
```
<a href {{on "click" (prevent-default (action "x"))}}>Do X</a>
```
Note that `action` has not in general been refactored away as a helper yet. In general, all event handlers should be methods on the corresponding component and referenced directly (e.g. `{{on "click" this.doSomething}}`). However, the `action` helper is used extensively throughout the codebase and often references methods in the `actions` hash on controllers or routes. Thus this refactor will also be extensive and probably deserves a separate PR.
Note: This work was done to complement #17767 by minimizing the potential impact of the `action` modifier override, which uses private API and arguably should be replaced with an AST transform.
Commits:
* Enable `no-action-modifiers` template lint rule
* Replace {{action "x"}} with {{on "click" (action "x")}}
* Remove unnecessary action helper usage
* Remove ctl+click tests for user-menu
These tests now break in Chrome when used with addEventListener. As per the comment, they can probably be safely removed.
* Prevent default event handlers to avoid unwanted side effects
Uses `event.preventDefault()` in event handlers to prevent default event handling. This had been done automatically by the `action` modifier, but is not always desirable or necessary.
* Restore UserCardContents#showUser action to avoid regression
By keeping the `showUser` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showUser` argument that's been passed.
* Revert EditCategoryTab#selectTab -> EditCategoryTab#select
Avoid potential breaking change in themes / plugins
* Restore GroupCardContents#showGroup action to avoid regression
By keeping the `showGroup` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showGroup` argument that's been passed.
* Restore SecondFactorAddTotp#showSecondFactorKey action to avoid regression
By keeping the `showSecondFactorKey` action, we can avoid a breaking change for plugins that rely upon it, while not interfering with the `showSecondFactorKey` property that's maintained on the controller.
* Refactor away from `actions` hash in ChooseMessage component
* Modernize EmojiPicker#onCategorySelection usage
* Modernize SearchResultEntry#logClick usage
* Modernize Discovery::Categories#showInserted usage
* Modernize Preferences::Account#resendConfirmationEmail usage
* Modernize MultiSelect::SelectedCategory#onSelectedNameClick usage
* Favor fn over action in SelectedChoice component
* Modernize WizardStep event handlers
* Favor fn over action usage in buttons
* Restore Login#forgotPassword action to avoid possible regression
1. Replace `{{did-insert` with the builtin `{{on` modifier
2. Move the i18n call into the template
With both of those changes, there is no logic left in the backing class, so we can switch to `templateOnly()` which is significantly faster. (granted, not a big deal for a component like this, but it makes for a good demonstration)
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Follow up to 4d3c1ceb44, this commit
shows the SMTP response in the admin email sent list and also moves the
topic/post link into a new column. Reply key is now in its own column.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
7caaee2 introduced a duplicate definition of the component JS. This likely happened because we had the template defined under `javascripts/discourse`, and the component JS defined under `javascript/admin`. This commit removes the duplicate definition, and moves the template to the admin addon
Twitter does not allow SVGs to be used for twitter:image
metadata (see https://developer.twitter.com/en/docs/twitter-for-websites/cards/overview/markup)
so we should fall back to the site logo if the image option
provided to `crawlable_meta_data` or SiteSetting.site_twitter_summary_large_image_url
is an SVG, and do not add the meta tag for twitter:image at all
if the site logo is an SVG.
Adds up and down buttons next to the inputs of value lists when there is more than 1 item present. This helps to re-order the items in the value lists if necessary.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
This commit should be a no-op for all existing core outlets. Outlets which are introduced by themes/plugins may see a change in behavior, and should follow the steps below if they want to maintain their previous behavior.
`tagName="" connectorTagName=""` is almost always the correct choice for plugin outlets. 40eba8cd introduced a `noTags=true` shortcut which achieved this, and left a comment saying it should be the future default. This commit does exactly that. To avoid any breaking changes for plugins, all existing plugin outlets have been reviewed and adjusted by following this logic:
1) If `noTags=true`, remove the `noTags` parameter, and do not complete any further steps
2) If `tagName` is not specified, set `tagName="span"` (the previous default)
3) If `connectorTagName` is not specified, set `selectorTagName="div"` (the previous default)
4) If `tagName=""`, remove it
5) If `connectorTagName=""`, remove it
The updates were accomplished with the help of a ruby script:
```ruby
def removeAttr(tag, attribute)
tag = tag.sub /\s#{attribute}="?\w*"? /, " "
tag = tag.sub /\s#{attribute}="?\w*"?}}/, "}}"
tag = tag.sub /^\s*#{attribute}="?\w*"?\n/, ""
tag
end
files = Dir.glob("app/assets/javascripts/**/*.hbs")
puts "Checking #{files.count} files..."
files.each do |f|
content = File.read(f)
count = 0
edits = 0
content.gsub!(/{{\s*plugin-outlet.*?}}/m) do |match|
count += 1
result = match
noTags = result.include?("noTags=true")
tagName = result[/tagName="(\w*)"/, 1]
connectorTagName = result[/connectorTagName="(\w*)"/, 1]
if noTags
result = removeAttr(result, "noTags")
else
if connectorTagName == ""
result = removeAttr(result, "connectorTagName")
elsif connectorTagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} connectorTagName=\"div\"" }
end
if tagName == ""
result = removeAttr(result, "tagName")
elsif tagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} tagName=\"span\"" }
end
end
edits += 1 if match != result
result
end
puts "#{count} outlets, #{edits} edited -> #{f}"
File.write(f, content)
end
```
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
In the composer, we already only allow for S3 multipart uploads
if enable_direct_s3_uploads is true, so in the backups uploader
that is based on Uppy we want to do the same thing. In future
if self-hosters need some way to not use S3 multipart in these
scenarios for whatever reason we can revisit this then (which
should be as simple as adding a enable_multipart_s3_uploads site
setting).
This takes the uppy chunking algorithm and combines it with some
form submission from resumable.js for parity with the current
backup controller to make local backup uploads work with uppy.
We can then use this to replace the resumable-upload component
and the resumable.js library from our codebase, once stable.
This is disabled by default, so people using local backups will not
be affected. The enable_experimental_backup_uploader site setting
must be enabled for this to work.
- Removes jquery
- Removes a not unregistered listener and uses component event
- Removes external-url class as it was only valid in one case of the dropdown
- Uses @action
- Tagless
- Other minor changes
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
Instead of using image-uploader, which relies on the old
UploadMixin, we can now use the uppy-image-uploader which
uses the new UppyUploadMixin which is stable enough and
supports both regular XHR uploads and direct S3 uploads,
controlled by a site setting (default to XHR).
At some point it may make sense to rename uppy-image-uploader
back to image-uploader, once we have gone through plugins
etc. and given a bit of deprecation time period.
This commit also fixes `for_private_message`, `for_site_setting`,
and `pasted` flags not being sent via uppy uploads onto the
UploadCreator, both via regular XHR uploads and also through
external/multipart uploads.
The uploaders changed are:
* site setting images
* badge images
* category logo
* category background
* group flair
* profile background
* profile card background
The host's category was successfully updated on the database, but the category property was not properly set when rendering the component for the first time.
* DEV: Remove HTML setting type and sanitization logic.
We concluded that we don't want settings to contain HTML, so I'm removing the setting type and sanitization logic. Additionally, we no longer allow the global-notice text to contain HTML.
I searched for usages of this setting type in the `all-the-plugins` repo and found none, so I haven't added a migration for existing settings.
* Mark Global notices containing links as HTML Safe.
Administrators can use second factor to confirm granting admin access
without using email. The old method of confirmation via email is still
used as a fallback when second factor is unavailable.
Major changes included:
- better support for screen readers
- trapping focus in modals
- better tabbing order in composer
- alerts on no content found/number of items found
- better autofocus in modals
- mini-tag-chooser is now a multi-select component
- each multi-select-component will now display selection on one row
This PR adds a hover title to a few columns on the admin users' page
/admin/users/list/active
The hover title will show the date in full format on those columns with shortened dates
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
* FEATURE: add penalty history when silencing a user
Display penalty history (last 6 months) when silencing/suspending a user
* FEATURE: allow default penalty values to be chosen
Adds a site setting that designates default penalty values in hours.
Silence/suspend modals will auto-fill in the default values, but otherwise
will still allow moderators to pick and overwrite values as normal.
First silence/suspend: first value
Second silence/suspend: second value
etc.
Penalty counts are forgiven at the same rate as tl3 promotion requirements do.
Co-authored-by: jjaffeux <j.jaffeux@gmail.com>
There is a big difference between regular watched words and regular
expressions and this has been confusing in the past. This notice adds
an explanation.
This commit also reorganizes the code of the test modal.
Note that this commit will also disable daily grouping for datasets with more than 30 data points. This will also smartly do the grouping by month when grouping a full year.
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
When editing the files for a theme in the admin dashboard, typing "cmd+s" (a common key-binding to save in most text editors) used to engage the browser's default "save page" dialogue.
This commit adds a key-binding to the ace editor that saves the file.
Now, the "cmd+s" (and "ctrl+s" for windows) key-binding does the same action as the save button.
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
To add an extra layer of security, we sanitize settings before shipping them to the client. We don't sanitize those that have the "html" type.
The CookedPostProcessor already uses Loofah for sanitization, so I chose to also use it for this. I added it to our gemfile since we installed it as a transitive dependency.
Find & Replace and Autotag watched words were not completely exported
and import did not work with these either. This commit changes the
input and output format to CSV, which allows for a secondary column.
This change is backwards compatible because a CSV file with only one
column has one value per line.
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR is the first step towards replacing our `{{user-selector}}` and eventually deprecating and removing it from our codebase. Some of `{{user-selector}}` problems are:
1. It's called `{{user-selector}}`, but in reality in can also select groups and emails.
2. It's an Ember component, yet it doesn't have a handlebars template and uses jQuery to render itself and modify the DOM. An example of this problem is when you want to clear the selected users programmatically, see [this](6c155dba77/app/assets/javascripts/discourse/app/components/user-selector.js (L179-L185)).
3. We now have select kit which does very similar things but a lot better.
This PR introduces `{{email-group-user-chooser}}` which is meant to replace `{{user-selector}}`. It extends select kit and has the same features that `{{user-selector}}` has. `{{user-selector}}` is still used in a few places in core, but they'll all be replaced with the new component in a separate commit.
Once `{{user-selector}}` is not used anywhere in core, it'll be deprecated and then removed after the 2.7 release.
- Improve warning message.
- Only display the warning if the language has a fallback and either "allow_user_locale", or "set_locale_from_accept_language_header" are enabled.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
Installing multiple copies of the same theme/component is possible, but you rarely need to actually have multiple copies installed. We've seen many times new admins installing duplicates of components because they were unaware it was already installed. This PR makes the theme installer modal loop through the existing themes when you click on 'install', and if there is a theme with a URL that matches the URL you entered, a warning will show up and you will need to click 'install' again to proceed.
Being that system badges ship with every instance of Discourse, we've opted to define the name, description, and long description in our locales files to promote translation into other languages. When an admin visited the overview page of a system badge in their admin panel, they were met with disabled inputs for these text properties. The problem is that we failed to educate the admin that the text needs to be managed via the site text customization settings.
This change adds a small "Customize Text" link under theses inputs that takes the admin to the specific site text customization where they can make desired changes.
Force pushing a commit to a theme repository used to break the updater,
because the system was not able to count the commits behind the old and
new version. This operation failed because a force push deleted the old
commits.
The user was prompted with a simple "500 server error" message.
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
Allowing the editing of remote themes has been something Discourse has advised against for some time. This commit removes the ability to edit or upload files to remote themes from Admin > Customize to enforce the recommended practice.
This makes it much easier to check the staff action logs for a specific site setting. A small history icon will appear when hovering over a site setting name. On click, you will be taken to the pre-filtered staff action log for the site setting.
Users could be silenced or suspended by two staff members at the same time and
would not be aware of it. This commit shows an error message if another penalty
has been applied.
Prior to this fix, weekly could be 8 days and we could have differences between period chooser text and actual results in the chart.
A good followup to this PR would be to add custom date ranges in period-chooser component.