When we change upload's sha1 (e.g. when resizing images) it won't match the data in the most recent S3 inventory index. With this change the uploads that have been updated since the inventory has been generated are ignored.
When FinalDestination is given a URL it encodes it before doing anything else. however S3 presigned URLs should not be messed with in any way otherwise we can end up with 400 errors when downloading the URL e.g.
<Error><Code>InvalidToken</Code><Message>The provided token is malformed or otherwise invalid.</Message>
The signature of presigned URLs is very important and is automatically generated and should be preserved.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
Let's say post #2 quotes post number #1. If a user decides to quote the
quote in post #2, it should keep the information of post #1
("user_1, post: 1, topic: X"), instead of replacing with current post
info ("user_2, post: 2, topic: X").
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
This ensures that the user object is created fresh for each example.
This is required for this particular spec as we can not risk having a stale
object, which can lead to a flaky spec.
People rarely want to have their avatars show up as the preview image on social media platforms. Instead, we should fall back to the site opengraph image.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
Meta thread: https://meta.discourse.org/t/sending-a-pm-with-the-following-title-causes-an-error/135654/3
We had an issue where if someone sent a PM with crazy
characters that are stripped and we end up with only
a number, the topic redirect errored because the slug was
a number. so instead we return the default as well if
the slug is a number after prettification
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
This is a slight workaround which helps somewhat now but is pending a larger
fix.
When this spec ran in parallel mode uploads could start cross talking and
an upload you expect to be there may vanish.
This works around the issue by making the upload unique every time it is
created
It also folds up an expensive test into the main one.
* DEV: Add API to alter uploads Markdown
* DEV: Extract data attributes from image / download Markdown
For example '[test|attachment|hello=world]' will generate an 'a' element
with a data attribute: 'data-hello=world'.
This commit also makes MarkdownIt to transform '|attachment' into
'class="attachment"'. This transformation used to be a part of the
process which resolves short URLs (i.e. upload://).
* DEV: Export imageNameFromFileName
Non UTF-8 user_agent requests were bypassing logging due to PG always
wanting UTF-8 strings.
This adds some conversion to ensure we are always dealing with UTF-8
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
