Migrate deprecated decorateCooked to decorateCookedElement for audio cloak-prevention.
This might give a minimal performance boost: running audio cloak-prevention for 20 (non-audio) posts takes 1 ms and not 15 ms.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
It was impossible to select the 'all' filter for categories that have
the default list filter set to 'no subcategories'. This happens because
'/all' was not appended to the URL and in the absence of any list filter
('all' or 'none'), the default list filter ('none') was automatically
selected.
Before 6e0e6014, the flow looked something like:
1. `discovery/topics` controller (which extends `discovery` controller) `afterRefresh()` calls `.send("loadingComplete")`
2. Bubbles to [`discovery` route](554ff07786/app/assets/javascripts/discourse/app/routes/discovery.js (L58))
3. Discovery route calls `controllerFor('discovery').loadingComplete()`. `loading` is set false, and the spinner disappears
Now that `discovery/topics` defines `loadingComplete` as an action, the `discovery/topics` controller runs its own `loadingComplete` handler logic in step 1, and the action does not bubble any further.
This commit adds action overrides in `discovery/topics`, so that the new actions only apply to the main `discovery` controller. The need for this does suggest some more radical refactoring is required, but these are very critical routes, and we are very close to a major release.
It is too close to release of 2.8 for incomplete
feature shenanigans. Ignores and drops the columns and drops
the trigger/function introduced in
e21c640a3c.
Will pick this feature back up post-release.
This commit should be a no-op for all existing core outlets. Outlets which are introduced by themes/plugins may see a change in behavior, and should follow the steps below if they want to maintain their previous behavior.
`tagName="" connectorTagName=""` is almost always the correct choice for plugin outlets. 40eba8cd introduced a `noTags=true` shortcut which achieved this, and left a comment saying it should be the future default. This commit does exactly that. To avoid any breaking changes for plugins, all existing plugin outlets have been reviewed and adjusted by following this logic:
1) If `noTags=true`, remove the `noTags` parameter, and do not complete any further steps
2) If `tagName` is not specified, set `tagName="span"` (the previous default)
3) If `connectorTagName` is not specified, set `selectorTagName="div"` (the previous default)
4) If `tagName=""`, remove it
5) If `connectorTagName=""`, remove it
The updates were accomplished with the help of a ruby script:
```ruby
def removeAttr(tag, attribute)
tag = tag.sub /\s#{attribute}="?\w*"? /, " "
tag = tag.sub /\s#{attribute}="?\w*"?}}/, "}}"
tag = tag.sub /^\s*#{attribute}="?\w*"?\n/, ""
tag
end
files = Dir.glob("app/assets/javascripts/**/*.hbs")
puts "Checking #{files.count} files..."
files.each do |f|
content = File.read(f)
count = 0
edits = 0
content.gsub!(/{{\s*plugin-outlet.*?}}/m) do |match|
count += 1
result = match
noTags = result.include?("noTags=true")
tagName = result[/tagName="(\w*)"/, 1]
connectorTagName = result[/connectorTagName="(\w*)"/, 1]
if noTags
result = removeAttr(result, "noTags")
else
if connectorTagName == ""
result = removeAttr(result, "connectorTagName")
elsif connectorTagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} connectorTagName=\"div\"" }
end
if tagName == ""
result = removeAttr(result, "tagName")
elsif tagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} tagName=\"span\"" }
end
end
edits += 1 if match != result
result
end
puts "#{count} outlets, #{edits} edited -> #{f}"
File.write(f, content)
end
```
This workaround was introduced before we had the ability to render components with no wrapper element. Now we can pass `tagName=""` to `plugin-outlet`.
We are planning on attaching bookmarks to more and
more other models, so it makes sense to make a polymorphic
relationship to handle this. This commit adds the new
columns and backfills them in the bookmark table, and
makes sure that any new bookmark changes fill in the columns
via DB triggers.
This way we can gradually change the frontend and backend
to use these new columns, and eventually delete the
old post_id and for_topic columns in `bookmarks`.
da6edc1 introduced the `lookupView` method, which initialized a fresh resolver, and used it to directly look up raw-views (with no caching). This worked well, but was not a clean solution. It required initializing an entirely new resolver, and did not have any caching.
This commit updates the `helperContext` to include access to the registry, and uses it to perform raw-view lookups. As well as re-using the registry, this also means we're making use of the resolver's built-in cache.
I haven't been able to measure any noticeable performance impact from this change, but there is certainly less work being done, so it may be beneficial on older devices.
Co-authored-by: Ayke Halder <rr-it@users.noreply.github.com>
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
The rake task deleted here was added back in Feb 2020
when bookmarks were first converted from PostAction
records, it is no longer needed. The ignored columns
were removed in ed83d7573e.
If a theme/plugin raises an error while decorating post content, the decorator will be skipped, and the error reported on the console. Additionally, administrators will be shown a red warning at the top of the screen.
This commit refactors and re-uses some of the logic from the theme-initializer-error-reporting logic. In future, new error reports can be added by doing something like:
```
document.dispatchEvent(
new CustomEvent("discourse-error", {
detail: { messageKey: "some.translation.key", error },
})
);
```
- switches to a raster image QR code so it can be long-pressed (or right
clicked) and added to iCloud keychain
- adds `autocomplete="one-time-code"` to the 2FA input for better
discoverability
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
Meta topic: https://meta.discourse.org/t/cant-pin-unpin-topic-from-the-title/213444?u=osama.
I know there is an inconsistency between the category of the linked topic (#bug) and the title prefix of this PR, but I really couldn't find anything in the code base that suggested this ever worked before, so I'm categorizing this PR as a feature.
Running in production mode is useful when doing performance-sensitive work.
- Set the `exportApplicationGlobal` flag, so we get the `Discourse` global in production mode. It defaults to only adding the global in development mode. Note that, when generating ember-cli assets via rails, we set this in `ApplicationHelper#discourse_config_environment`.
- Disable SRI - Ember CLI adds this to index.html when in production mode. We don't use SRI in production, so disable here to match.
- Refactor the `AssetRev` logic in `ember-cli-build.js`, so that our custom bundle hashes are find/replaced into index.html. Without this change, our custom bundles (e.g. `start-discourse.js`) remain without their hash in `index.html`, and do not function.
I have confirmed that the only diff in the `/dist` out following this change is to the `index.html` file. All other filenames and contents remain identical.
You can add callbacks that get called before updating an already consolidated notification or creating a consolidated one.
Instances of this rule can add callbacks to access the old notifications about to be destroyed or the consolidated one and add additional data inside the data hash versus having to execute extra queries when adding this logic inside the `set_mutations` block.
Centralizes calculations in a helper under the site header component.
This also reverts a small CSS change to the composer: since ac79c5ef,
the composer height was not including the grippie, which means that the
composer height was off by 11 pixels, and the topic progress widget was
sometimes being displayed cut off by 11 pixels.
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
A follow-up to #15117 and #15141. Applies the previous changes to PM-specific fields, makes the preview area take the all the available height of the composer, and unifies more spacing between composer elements.
This PR moves the behavior from the PostAlerter. We delete an existing liked notification and set the `username2` attribute to the previous `display_username`. We repeat this process unless the last one is old enough or it's not in the most recent ones.
The new draft sequence is returned after the draft is saved and usually
it is the old draft sequence plus one and this way the new draft
sequence can be predicted.
Sometimes drafts are saved at odd times or the request is slower than
usual which can create a race condition. This prediction can fix this
problem.
This commit removes jQuery file uploader from Discourse,
completing the transition to Uppy. The image-uploader
and UploadMixin components are also removed in this commit
as they have already been replaced and are the only things
using jQuery file upload.
.-'~~~`-.
.' `.
| R I P |
| jquery |
| file |
| upload |
| |
\\| 2013-2021 |//
-----------------
The `fancy_title` column in the `topics` table currently has a constraint that limits the column to 400 characters. We need to remove that constraint because it causes some automatic topics/PMs from the system to fail when using Discourse in locales that need more than 400 characters to the translate the content of those automatic messages.
Internal ticket: t58030.
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
Occasionally there will be a misconfigured CORS rule or a different
network failure when loading one of the media optimization WASM scripts.
This commit handles load failures and sends a new installFailed message
from the service worker, so that we don't error and hold up the rest
of the uploads if this occurs; the worker will just not process anything
and will keep trying to install itself with subsequent uploads until it succeeds.
This commit also removes the redundant useUppy variable in the worker
this should have been removed a while ago in f70e6c302f
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
* FEATURE: hide_email_address_taken forces use of email in forgot password form
This strengthens this site setting which is meant to be used to harden sites
that are experiencing abuse on forgot password routes.
Previously we would only deny letting people know if forgot password worked on not
New change also bans usage of username for forgot password when enabled
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
Some time ago, we made this fix to external authentication – https://github.com/discourse/discourse/pull/13706. We didn't address Discourse Connect (https://meta.discourse.org/t/discourseconnect-official-single-sign-on-for-discourse-sso/13045) at that moment, so I wanted to fix it for Discourse Connect as well.
Turned out though that Discourse Connect doesn't contain this problem and already handles staged users correctly. This PR adds tests that confirm it. Also, I've extracted two functions in Discourse Connect implementation along the way and decided to merge this refactoring too (the refactoring is supported with tests).
A plugin API that allows customizing existing topic-backed static pages, like:
faq, tos, privacy (see: StaticController) The block passed to this
method has to return a SiteSetting name that contains a topic id.
```
add_topic_static_page("faq") do |controller|
current_user&.locale == "pl" ? "polish_faq_topic_id" : "faq_topic_id"
end
```
You can also add new pages in a plugin, but remember to add a route,
for example:
```
get "contact" => "static#show", id: "contact"
```
* Remove _calculateTopOffset entirely
* Show group card with animated loading state
Showing the animated loading state before rending the actual content prevents an
awkward scroll position jump when displaying this card.
This mimics the behaviour of the user card (which uses the same `CardContentsBase` mixin).
* Fix two user card issues
1. A JS console error (with no consequences) when clicking a group mention
2. User cards weren't being loaded from the header (for example, for PMs)
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
If the Ember OnError validation test is added, it breaks the "no tests were run" detection (since at least 1 test is always run). This is particularly important when running tests scoped to a single plugin, because there is no indication that you have typo'd the `qunit_single_plugin` query parameter.
This is so the target element for file drag + drop is
not always just this.element for the component, and
provides a way to hook into onDragOver and onDragLeave.
By default also adds a .uppy-is-drag-over class to the target
element.
In the composer, we already only allow for S3 multipart uploads
if enable_direct_s3_uploads is true, so in the backups uploader
that is based on Uppy we want to do the same thing. In future
if self-hosters need some way to not use S3 multipart in these
scenarios for whatever reason we can revisit this then (which
should be as simple as adding a enable_multipart_s3_uploads site
setting).
We cannot use any of the uppy mixins or core code, because
the code there is not shared with the wizard, and to move
it all to discourse-common would be a task almost equal
difficulty to taking the ring to Mordor.
Therefore, we can just use the uppy vendor libraries in the
wizard, and do a quick-n-dirty version of the uppy upload
code for the wizard-field-image uploader.
This commit allows for using Tab and Shift+Tab to indent
and de-indent selected text in the composer. The selected
text is searched for the most occurrences of either tabs (\t)
or spaces at the start of each line, and that character is
used for indentation of all lines.
We previously used ConsolidateNotifications with a threshold of 1 to re-use an existing notification and bump it to the top instead of creating a new one. It produces some jumpiness in the user notification list, and it relies on updating the `created_at` attribute, which is a bit hacky.
As a better alternative, we're introducing a new plan that deletes all the previous versions of the notification, then creates a new one.
We send the reminder using the GroupMessage class, which supports removing previous messages. We can't match them by raw because they could mention different moderators. Also, I had to change the subject to remove dynamically generated values, which is necessary for finding them.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Previously, it was based on the container of the avatar. However, the
container of the avatar can be extended to contain more than just the
avatar itself. This resulted in the positioning of the avatar flair to
be off.
We don't need it anymore. Actually, I removed using of it on the client side a long time ago, when I was working on improving blank page syndrome on user activity pages (see https://github.com/discourse/discourse/pull/14311).
This PR also removes some old resource strings that we don't use anymore. We have new strings for blank pages.
Previously the discourse-presence plugin was using a `position: absolute` hack to display the 'replying...' users in the top right of the composer. This commit adds a more suitable plugin outlet, and updates the discourse-presence styling so it slots into the flex-box layout at the top of the composer
The `ReviewableScore` model was defining class methods on `self.class`
from a singleton context so instead of defining methods on
`ReviewableScore` it was defining them on `Class`, so basically on every
existing class.
This patch resolves this issue. Using `enum` from `ActiveRecord` in the
future will avoid this kind of problems.
This allows consumers to vary the parameters on a per-channel basis. e.g. if you wanted a channel to consider someone 'away' after 10 minutes, and another channel to consider someone 'away' after 1 minute, that is now possible.
Currently we display pending posts in topics (both for author and staff
members) but the feature is only enabled when there’s an enabled global site
setting related to moderation.
This patch allows to have the same behavior for a site where there’s
nothing enabled globally but where a moderated category exists. So when
browsing a topic of a moderated category, the presence of pending posts
will be checked whereas nothing will happen in a normal category.
Currently the Message-IDs we send out for outbound email
are not unique; for a post they look like:
topic/TOPIC_ID/POST_ID@HOST
And for a topic they look like:
topic/TOPIC_ID@HOST
This commit changes the outbound Message-IDs to also have
a random suffix before the host, so the new format is
like this:
topic/TOPIC_ID/POST_ID.RANDOM_SUFFIX@HOST
Or:
topic/TOPIC_ID.RANDOM_SUFFIX@HOST
This should help with email deliverability. This change
is backwards-compatible, the old Message-ID format will
still be recognized in the mail receiver flow, so people
will still be able to reply using Message-IDs, In-Reply-To,
and References headers that have already been sent.
This commit also refactors Message-ID related logic
to a central location, and adds judicious amounts of
tests and documentation.
* FIX: allows more precise placement strategy on mobile
- default to absolute on mobile, fixed on desktop
- allows to set a global `placementStrategy` or a specific to each view `mobilePlacementStrategy` `desktopPlacementStrategy`
This is mainly used to allow a proper composer-actions positioning in mobile.
Note this commit also fixes a mouseDown event which could propagate quote-button event and cause the composer to close full screen on mobile
* mobile only
Before this, if you were composing a new topic and then switched the mode to "New Message", the dropdown would disappear.
So if you changed your mind, you'd have to copy the text you typed, cancel, click "New Topic" again, and then paste the text. (and if you already had a title entered too, things would be more complicated…)
When redirecting to login, we store a destination_url cookie, which the user is then redirected to after login. We never want the user to be redirected to a JSON URL. Instead, we should return a 403 in these situations.
This should also be much less confusing for API consumers - a 403 is a better representation than a 302.
1b3d124a introduced a logic change which meant that we attempted to bootstrap, even on pages without any `preloadJson` (i.e. non-ember HTML pages from Discourse). This commit restores the original logic, making sure to avoid `?.`.
Old OnceOff job could perform pretty slowly on sites with millions of emails
New implementation operates in batches in a migration, minimizing locking.
