The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
* FEATURE: Replace existing badge owners when using the bulk award feature
* Use ActiveRecord to sanitize title update query, Change replace checkbox text
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
group membership and `CategoryUser` notification level should be
respected to determine whether to notify staged users about activity in
private categories, instead of only ever generating notifications for staged
users' own topics (which has been the behaviour since
0c4ac2a7bc)
Let's say post #2 quotes post number #1. If a user decides to quote the
quote in post #2, it should keep the information of post #1
("user_1, post: 1, topic: X"), instead of replacing with current post
info ("user_2, post: 2, topic: X").
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
On some customer forums we are randomly getting a "You must select a valid user" error when sending a PM even when all parameters seem to be OK. This is an attempt to track it down with more data.
There is a feature, that when tag or category is added to the topic,
customers who are watching that category or tag are notified.
The problem is that it is using default notification type "new post"
It would be better to use "new post" only when there really is a new
post and "edited" when categories or tags were modified.
Previously if local login via email was disabled because of the site setting or because SSO was enabled, we were raising a 500 error. We now raise a 403 error instead; we shouldn't raise 500 errors on purpose, instead keeping that code for unhandled errors. It doesn't make sense in the context of what we are validating either to raise a 500.
This fix allows a user to remove their currently assigned primary group
if the Site Setting `user selected primary groups` is enabled.
Before this fix, if a user selected "none" for their primary group it
would silently fail and never be updated.
Custom emoji, profile background, and card background were being set to secure, which we do not want as they are always in a public context and result in a 403 error from the ACL if linked directly.
* When we refactored away the admin-login route we introduced a bug where admins could not log into an SSO enabled site, because of a check in the email_login route that disallowed this.
* Allow admin to get around this check.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
Some specs use psql to test database restores and dropping the table after the test needs to happen outside of rspec because of transactions. The previous attempt lead to some changes to be stored in the test database.
FIX: raised a proper NotFound exception when filtering groups by username with invalid username.
FIX: properly filter the groups based on current user visibility when viewing another user's groups.
DEV: Guardian.can_see_group?(group) is now using Guardian.can_see_groups(groups) instead of duplicating the same code.
FIX: spec for groups_controller#index when group directory is disabled for logged in user.
FIX: groups_controller.sortable specs to actually test all sorting combinations.
DEV: s/response_body/body/g for slightly shorter spec code.
FIX: rewrote the "view another user's groups" specs to test all group_visibility and members_group_visibility combinations.
DEV: Various refactoring for cleaner and more consistent code.
* UI: Mass grant a badge from the admin ui
* Send the uploaded CSV and badge ID to the backend
* Read the CSV and grant badge in batches
* UX: Communicate the result to the user
* Don't award if badge is disabled
* Create a 'send_notification' method to remove duplicated code, slightly shrink badge image. Replace router transition with href.
* Dynamically discover current route
When using the login confirmation screen, the referrer URL is `/auth/{provider}`. That means that the user is redirected back to the confirmation screen after logging in, even though login was successful. This is very confusing. Instead, they should be redirected to the homepage.
if SiteSetting.secure_media is disabled we still want to
redirect to the signed url for uploads that are marked as
secure because their ACLs are probably still private
* Add a rake task to disable secure media. This sets all uploads to `secure: false`, changes the upload ACL to public, and rebakes all the posts using the uploads to make sure they point to the correct URLs. This is in a transaction for each upload with the upload being updated the last step, so if the task fails it can be resumed.
* Also allow viewing media via the secure url if secure media is disabled, redirecting to the normal CDN url, because otherwise media links will be broken while we go and rebake all the posts + update ACLs
6e1fe22 introduced the possiblity for category_users to have a NULL notification_level, so that we can store `last_seen_at` dates without locking the notification level. At the time, this did not affect the topic-tracking-state query. However, the query changes in f434de2 introduced a slight change in behavior.
Previously, a subquery would look for a category_user with notification_level=mute. f434de2 refactored this to remove the subquery, and inverted some of the logic to suit.
The new query checked for `notification_level <> :muted`. If `notification_level` is NULL, this comparison will return NULL. In this scenario, notification_level=NULL means that we should fall back to the default tracking level (regular), and so we want the expression to resolve as true, not false. There was already a check for the existence of the category_users row, but it did not check for the existence of a NOT NULL notification_level.
This commit amends the expression so that the notification_level will only be compared if it is non-null.
* FIX: bulk insert to create application requests
* FIX: bulk insert to create topics
* FIX: no need to create separate user for each topic, post etc.
* FIX: Another bulk_insert of ApplicationRequests
* FIX: dont create user and topic instances when not neccessary
* FIX: merge examples with expensive setup into one example
This ensures that the user object is created fresh for each example.
This is required for this particular spec as we can not risk having a stale
object, which can lead to a flaky spec.
Providing invalid dates as the end_date or start_date param causes a 500 error and creates noise in the logs. This will handle the error and returns a proper 400 response to the client with a message that explains what the problem is.
This is required for people using apps with custom protocols. We still verify the entire URL (including protocol) against the site setting value.
Refactored wildcard_url_checker so that it always returns a boolean, rather than sometimes returning a regex match.
Added a fix to gracefully error with a Webauthn::SecurityKeyError if somehow a user provides an unkown COSE algorithm when logging in with a security key.
If `COSE::Algorithm.find` returns nil we now fail gracefully and log the algorithm used along with the user ID and the security key params for debugging, as this will help us find other common algorithms to implement for webauthn
- Refactor source_url to avoid using eval in development
- Precompile handlebars in development
- Include template compilers when running qunit
- Remove unsafe-eval in development CSP
- Include unsafe-eval only for qunit routes in development
Previously, categories without any topics were being excluded from the UPDATE query. This means the counter gets stuck, and the category cannot be deleted. This change ensures that the counters get correctly set to zero.
Restore tl3 reachability by calculating penalty counts vs unsuspend/unsilence.
Only count unsuspend or unsilences that have been made by a user other than
the Discourse system user.
People rarely want to have their avatars show up as the preview image on social media platforms. Instead, we should fall back to the site opengraph image.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
A small fix for Basic User Serializers where some downstream serializers do not correctly set user objects. This caused some issues in certain plugins that depend on the user method to return a user.
Meta thread: https://meta.discourse.org/t/sending-a-pm-with-the-following-title-causes-an-error/135654/3
We had an issue where if someone sent a PM with crazy
characters that are stripped and we end up with only
a number, the topic redirect errored because the slug was
a number. so instead we return the default as well if
the slug is a number after prettification
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
This should catch a few scenarios which can waste a lot of time in development
- Forgetting to run migrations
- Missing plugin migrations
- Missing post_deploy migrations
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
Hide old bookmark post-menu item if the site setting for the new bookmark reminders is enabled and change icon for the new bookmark functionality to the same as the old bookmark button
Fix null @topic_view error in post serializer for post_bookmark, as new posts do not have a @topic_view
This is a slight workaround which helps somewhat now but is pending a larger
fix.
When this spec ran in parallel mode uploads could start cross talking and
an upload you expect to be there may vanish.
This works around the issue by making the upload unique every time it is
created
It also folds up an expensive test into the main one.
The following methods have long been deprecated in ruby due to flaws in their implementation per http://blade.nagaokaut.ac.jp/cgi-bin/vframe.rb/ruby/ruby-core/29293?29179-31097:
URI.escape
URI.unescape
URI.encode
URI.unencode
escape/encode are just aliases for one another. This PR uses the Addressable gem to replace these methods with its own encode, unencode, and encode_component methods where appropriate.
I have put all references to Addressable::URI here into the UrlHelper to keep them corralled in one place to make changes to this implementation easier.
Addressable is now also an explicit gem dependency.
Note: All of this functionality is hidden behind a hidden, default false, site setting called `enable_bookmarks_with_reminders`. Also, any feedback on Ember code would be greatly appreciated!
This is part 1 of the bookmark improvements. The next PR will address the backend logic to send reminder notifications for bookmarked posts to users. This PR adds the following functionality:
* We are adding a new `bookmarks` table and `Bookmark` model to make the bookmarks a first-class citizen and to allow attaching reminders to them.
* Posts now have a new button in their actions menu that has the icon of an actual book
* Clicking the button opens the new bookmark modal.
* Both name and the reminder type are optional.
* If you close the modal without doing anything, the bookmark is saved with no reminder.
* If you click the Cancel button, no bookmark is saved at all.
* All of the reminder type tiles are dynamic and the times they show will be based on your user timezone set in your profile (this should already be set for you).
* If for some reason a user does not have their timezone set they will not be able to set a reminder, but they will still be able to create a bookmark.
* A bookmark can be deleted by clicking on the book icon again which will be red if the post is bookmarked.
This PR does NOT do anything to migrate or change existing bookmarks in the form of `PostActions`, the two features live side-by-side here. Also this does nothing to the topic bookmarking.
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
When the tag is muted and topic contains that tag, we should not mark that message as NEW.
There are 3 possible settings which site admin can set.
remove_muted_tags_from_latest - always
It means that if the topic got at least one muted tag, we should not mark that topic as NEW
remove_muted_tags_from_latest - only muted
Similar to above, however, if at least one tag is not muted, the topic is marked as NEW
remove_muted_tags_from_latest - never
Basically, mute tag setting is ignored and all topics are set as NEW
* DEV: Add API to alter uploads Markdown
* DEV: Extract data attributes from image / download Markdown
For example '[test|attachment|hello=world]' will generate an 'a' element
with a data attribute: 'data-hello=world'.
This commit also makes MarkdownIt to transform '|attachment' into
'class="attachment"'. This transformation used to be a part of the
process which resolves short URLs (i.e. upload://).
* DEV: Export imageNameFromFileName
Non UTF-8 user_agent requests were bypassing logging due to PG always
wanting UTF-8 strings.
This adds some conversion to ensure we are always dealing with UTF-8
Previously it was unclear why certain gems are being held back cause Gemfile
had no comment explaining it.
I tried to add some explanation from memory and remove some exceptions that
seemed to be superfluous.
This upgrades shoulda to latest, it appears to work once a couple of assertions
are removed
Also update http accept language used to auto detect language from http header
this is tested
Zeitwerk small update seems fine
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
This bug was causing some unusual behavior when the last post is filtered (e.g. from an ignored user). In some situations this would cause suggested topics to be omitted from the payload.
The next_page specs have been updated to remove most of the stubs
Some endpoints are returning i18n keys instead of translated messages
and with these changes, the site_texts endpoint can help translating
those.
Pagination part is needed for better wildcard support. For example,
looking for 'js.notifications' would set 'has_more' to true, but return
only the first 50 messages with no way of fetching the remaining.
* Support for custom messages and redirects when creating posts
When a post/topic is created Discourse serializes a `NewPostResult`
object. Normally this contains a status like `created_post` or
errors describing why the post could not be created.
There are times when a plugin might want to take the inputted post
and do something in the background. In this case, the plugin
can return a custom `message` and `route_to` attribute in the
`NewPostResult`.
If present, the message will be displayed in an alert, and when "Ok" is
clicked the user will be routed to the new URL.
* Destroy the draft in parallel
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
We already cache failed onebox URL requests client-side, we now want to cache this on the server-side for extra protection. failed onebox previews will be cached for 1 hour, and any more requests for that URL will fail with a 404 status. Forcing a rebake via the Rebake HTML action will delete the failed URL cache (like how the oneboxer preview cache is deleted).
When uploading a file to a theme component, and that file is existing and has already been marked as secure, we now automatically mark the file as secure: false, change the ACL, and log the action as the user (also rebake the posts for the upload)
If a user has more than 60 active sessions, the oldest sessions will be terminated automatically. This protects performance when logging in and when loading the list of recently used devices.
This is a bottom up rewrite of Discourse cache to support faster performance
and a limited surface area.
ActiveSupport::Cache::Store accepts many options we do not use, this partial
implementation only picks the bits out that we do use and want to support.
Additionally params are named which avoids typos such as "expires_at" vs "expires_in"
This also moves a few spots in Discourse to use Discourse.cache over setex
Performance of setex and Discourse.cache.write is similar.
Discourse.cache is a more consistent method to use and offers clean fallback
if you are skipping redis
This is part of a larger change that both optimizes Discoruse.cache and omits
use of setex on $redis in favor of consistently using discourse cache
Bench does reveal that use of Rails.cache and Discourse.cache is 1.25x slower
than redis.setex / get so a re-implementation will follow prior to porting
This amends our API so we provide it with the draft key when saving a post
this means post creator can clean up the draft consistently even if we are
doing fancy stuff like replying to a new topic or new pm or whatever.
There will be some followup work to clean it up so client never calls destroy
on draft during normal operation and the #create/#update endpoints takes care of it
every time
PG 12 changes internals in a subtle way, time jitter is noticed in a few new
spots (which is normal) and default ordering is a bit different which is meant
to be random anyway.
If current value is nil we should use `&.` combined with `dig` to protect diff from erroring
It is happening when for example theme is delete (new value is empty)
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
When category is dismissed, `dismiss_new` message is sent to fronted to clean state.
In addition, I noticed that when old dismiss new button is clicked, no message is sent so I decided to kill two birds with one stone.
There was an issue on dev where when uploading secure media, the href of the media was correctly being replaced in the CookedPostProcessor, but the srcset urls were not being replaced correctly. This is because UrlHelper.cook_url was returning the asset host URL for the media for secure media instead of returning early with the proxied secure proxy url.
