* pretender wasn't catching the request because it ran after this test finished
* restore wasn't needed, we do `sinon.restore()` after each test
The error was:
```
↪ Unit | Model | user::resolvedTimezone [✔]
↪ Unit | Utility | url::routeTo with prefixUnhandled request in test environment: /forum/u/chuck.json (PUT)
Error: Unhandled request in test environment: /forum/u/chuck.json (PUT)
at Pretender.server.unhandledRequest (discourse/tests/setup-tests:173:15)
at Pretender.handleRequest (pretender:400:14)
at FakeRequest.send (pretender:169:21)
at Object.send (jquery:10100:10)
at Function.ajax (jquery:9683:15)
at performAjax (discourse/app/lib/ajax:174:19)
at eval (discourse/app/lib/ajax:183:11)
at invokeCallback (ember:63104:17)
at publish (ember:63087:9)
at eval (ember:57463:16)
[✘]
```
A minimal reproduction:
`http://localhost:3001/qunit?seed=3&testId=da76996b&testId=e52a53e7`
This adds the following columns to EmailLog:
* cc_addresses
* cc_user_ids
* topic_id
* raw
This is to bring the EmailLog table closer in parity to
IncomingEmail so it can be better utilized for Group SMTP
and IMAP mailing.
The raw column contains the full content of the outbound email,
but _only_ if the new hidden site setting
enable_raw_outbound_email_logging is enabled. Most sites do not
need it, and it's mostly required for IMAP and SMTP sending.
In the next pull request, there will be a migration to backfill
topic_id on the EmailLog table, at which point we can remove the
topic fallback method on EmailLog.
The exception page is shown before Ember can actually figure out what the final destination URL we're going to is.
This means that the new page is not present in the history stack, so if we attempt to use the history stack to go back, we will actually navigate back by two steps.
By instead forcing a navigation to the current URL, we achieve the goal of going "back" with no history mucking.
Unfortunately, the actual URL that was attempted is not available. Additionally, this only works for the on-screen back button and not the browser back.
Additionally, several modernizations of the exception page code were made.
This was previously broken by 59ef48c0b9 (#11425, #11424).
Centralize the logic into the exception controller, which avoids the problematic bug and makes it easy to add additional detailed 404 pages in the future.
Sometimes oneboxes contain the same link multiple times and the link
count was shown for each of them. This commit adds link count only to
the most important link, that being either a heading or the header of
the onebox.
Before this change, calling `StyleSheet::Manager.stylesheet_details`
for the first time resulted in multiple queries to the database. This is
because the code was modelled in a way where each `Theme` was loaded
from the database one at a time.
This PR restructures the code such that it allows us to load all the
theme records in a single query. It also allows us to eager load the
required associations upfront. In order to achieve this, I removed the
support of loading multiple themes per request. It was initially added
to support user selectable theme components but the feature was never
completed and abandoned because it wasn't a feature that we thought was
worth building.
If a user posted a URL that appeared inside a Onebox, then the user
got a duplicate link notice. This was fixed by skipping those links in
Ruby.
If a user posted a URL that was Oneboxes and contained other links that
appeared in previous posts, then the user got a duplicate link notice.
This was fixed by skipping those links in JavaScript.
The generated regular expressions did not contain \b which matched
every text that contained the word, even if it was only a substring of
a word.
For example, if "art" was a watched word a post containing word
"artist" matched.
The dismiss new keyboard shortcut (x,r) has been broken since
7a79bd7da3. A fix was done and JS
tests were added in 006d52f32b
and b01e4738ab but the test was not
quite correct and so the bottom dismiss new button was not clicked.
This also fixes an issue with our keyboard shortcut click handling.
If multiple elements matched the selector they were all clicked. Now
we just click the first match.
If you click on a bookmark in the post stream you get an Edit Bookmark modal. This does not happen if you click the topic bookmark button.
We want to open the Edit modal too if there is only one bookmark on a topic (it doesn't matter on the first post or not). The other behaviour if there are > 1 bookmarks in the topic is to prompt the user to confirm delete of all the bookmarks in the topic. This behaviour will stay as-is.
I have done some refactoring in this PR, and still, there is a place for improvement. For example, we don't call post.deleteBookmark() method when deleting several bookmarks. I just don't want to refactor too much in one PR.
The first thing we needed here was an enum rather than a boolean to determine how a directory_column was created. Now we have `automatic`, `user_field` and `plugin` directory columns.
This plugin API is assuming that the plugin has added a migration to a column to the `directory_items` table.
This was created to be initially used by discourse-solved. PR with API usage - https://github.com/discourse/discourse-solved/pull/137/
Anonymizing a user changed their email address, destroyed all
associated InvitedUser records, but did not destroy the invites
associated to user's email.
Note that this commit will also disable daily grouping for datasets with more than 30 data points. This will also smartly do the grouping by month when grouping a full year.
Profiling showed that we were roughly 10% of a request time creating all
the ActiveRecord objects for categories in the `Site` model on a site with 61 categories.
Instead of querying for the categories each time based on which categories the user can see,
we can just preload all of the categories upfront and filter out the
categories that the user can not see.
Adds the last updated at and by SMTP/IMAP fields to the UI, we were already storing them in the DB. Also makes sure that `imap_mailbox_name` being changed makes the last_updated_at/by field update for IMAP.
When dismissing new topics for the Tracked filter, the dismiss was
limited to 30 topics which is the default per page count for TopicQuery.
This happened even if you specified which topic IDs you were
selectively dismissing. This PR fixes that bug, and also moves
the per_page_count into a DEFAULT_PER_PAGE_COUNT for the TopicQuery
so it can be stubbed in tests.
Also moves the unused stub_const method into the spec helpers
for cases like this; it is much better to handle this in one place
with an ensure. In a follow up PR I will clean up other specs that
do the same thing and make them use stub_const.
The `bootstrap.json` contains most preloaded information but some routes
provide extra information, such as invites.
This fixes the issue by having the preload request pass on the preloaded
data from the source page, which is then merged with the bootstrap's
preloaded data for the final HTML payload.
Steps to reproduce the bug:
- Create bookmarks for several posts on a topic
- Click the topic level bookmark button, it’ll open the modal that asks to confirm clearing all bookmarks from the topic
- Choose No
- Try to push the topic level bookmark button again - it won’t work
And it's fixed with this commit
This can happen when an avatar-flair component is rendered to an anonymous user on a login_required site (e.g. when they are redeeming an invite). The lack of group information was causing an error to be raised. With this commit, it now simple skips rendering the flair.
* Revert "DEV: skips three tests following cc1e73 (#13386)"
This reverts commit 2be201660a.
* FIX: Do not refresh post stream twice
This also improves the test suite and simulates a long running request
* FIX: Update local copy of raw
When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
Next Week should mean next Monday, Next Month - the first day of the next month, and so on.
Also, we'll be using the name "Next Monday" instead of "Next Week" because it's easier to understand. No one can get confused by next Monday.
* DEV: skips two tests following cc1e73
Following the fix in cc1e73b8e4 we now refresh the whole stream which causes expected states of these tests to not exist anymore.
I'm skipping theses tests while we decide for a better fix.
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
We previously only showed the link to the Email section
of group settings if both SMTP and IMAP were enabled for
a site, but this is not necessary now, only SMTP can be
enabled by itself so we should show the section if SMTP
is enabled.
Rendering an empty flair element with the css `background-image: url();` causes the browser to attempt an image request against the current document URL. Making duplicate requests for the document URL can cause some unusual race conditions, especially related to cookies. If this user-avatar-flair element was present on the site homepage (e.g. if categories+latest is the homepage), then it can prevent the signup flow from working correctly.
This commit updates the user-avatar-flair component to be a transparent wrapper around the avatar-flair component. If the user has no flair, no avatar-flair element will be rendered. This avoids the `background-image: url();` situation, and fixes the auth flow.
This commit also removes the duplicate avatar flair rendering from the `latest-topic-list-item` component. This wasn't particularly obvious, since the duplicate flairs were being rendered directly on top of each other.
The problem was happening in component integration tests on the rendering stage, sometimes the rendering would never finish.
Using time moments in the future when faking time solves the problem. Unfortunately, I don't know why exactly it helps. It was just a lucky guess after some hours I spent trying to figure out what's going on. But I've done a lot of testings, so looks like it really works. I'll be monitoring builds for some time after merging this anyway.
Unit tests seem to work alright with moments in the past. And we don't fake time in acceptance tests at the moment but I guess they would very likely be flaky with time moments from the past since they also do rendering.
I'm actually thinking of moving all fake time moments to the future (including moments in unit tests) to decrease the chances of flakiness. But I don't want to do everything in one PR, because I can accidentally introduce new flakiness.
A pretty easy way of picking time moments in the future for tests is to use the 2100 year. It has the same calendar as 2021. If a day is Monday in 2021 it's Monday in 2100 too.
Before this fix if your forum was set up with a subfolder and you
clicked on a link to a different subfolder it would not work. For
example:
subfolder: /cool
link is: /about-us
Previously it would try to resolve /about-us as /cool/about-us. With
this fix it redirects to /about-us correctly.
Editing a post that was just posted caused it to be reloaded and made a
request to the server. This had an additional side effect where the
model instances used by post stream and composer would be different and
changes did not propagate correctly.
Notifying about a tag change sometimes resulted in loading a large
number of users in memory just to perform an exclusion. This commit
prefers to do inclusion (i.e. instead of exclude users X, do include
users in groups Y) and does it in SQL to avoid fetching unnecessary
data that is later discarded.
When replying to a user_private_message email originating from
a group PM that does _not_ have a reply key (e.g. when replying
directly to the group's SMTP address), we were mistakenly linking
the new post created from the reply to the OP and the user who
created the topic, based on the first IncomingEmail message ID in
the topic, rather than using the correct reply to user and post number
that the user actually replied to.
We now use the In-Reply-To header to look up the corresponding EmailLog
record when the user who replied was sent a user_private_message email,
and use the post from that as the reply_to_user/post.
This also removes superfluous filtering of incoming_email records. After
already filtering by message_id and then addressed_to_user (which only
returns incoming emails where the to, from, or cc address includes any
of the user's emails), we were filtering again but in the ruby code for
the exact same conditions. After removing this all existing tests still
pass.
Previously due to "rowheader" role we would read out topic titles twice.
This adjusts it so we apply the heading role only to the topic link.
In turn this makes navigation through topic lists more accurate (h) only
lands you on topic links. It also reduces the amount of duplicate reading
NVDA does.
Before:
Topic title link new topic link support link b481 link 19h link 2 button...
After:
Topic title link
This reduces noise, up and down once you land on a topic link can give you
more context.
* UX: Improvements to reorder categories UX
Before, moving a category from, for example, position 25 to position 0 would result in switching the positions of the two categories at those positions.
Category A at position 0 would move to position 25, and Category B at position 25 would move to position 0.
Instead of switching positions, the reorder categories function should retain the order of categories except for the one being moved.
So, Category B at position 25 would still move to position 0, but Category A is merely bumped down to position 1.
This improves the UX because if a user *really* wants to switch the two categories, it results in one extra step. However in the other (what I think is normal) case, it saves the 24 other switches the user has to make to get Category A back to position 1 (you can imagine the user having to click the up arrow button repeatedly to return Category A to the top of the page). Now, imagine trying to do this with a site with 100s of categories. Yikes!
The UX improvement described above is what this commit accomplishes by redesigning the `move()` method of the reorder-categories controller. It adds some overhead to adjust the positions of all categories in between the origin and target positions, but in testing this is not noticible to the user. It's better for the computer to do extra work than the user.
* UX: Allow decimal input in reorder-categories for more precise positioning.
A common UX pattern when reordering a list of items is to allow a user to specify a target position as a decimal between two valid integer positions. The user is indicating they want the target list item to move in between the list items at the positions on either side of the target position.
For example, say there are three categories Category A at position 0, Category B at position 1, and Category C at position 3.
To move Category C in between Categories A and B, a user can now simply update Category C's position to 0.5.
The `ember_jquery` bundle contains production builds of Ember and jQuery
which doesn't work with tests. This commits introduces a new
`theme_qunit_vendor` bundle which is copy of the `vendor` bundle but
doesn't contain `ember_jquery`.
This commit is a partial revert of
409c8585e4
Previously, the `transformed.blah` shortcut could only be used in top-level hbs statements like {{transformed.blah}}. When attempting to use it in a sub-expression like `{{concat "hello" transformed.world}}`, it would raise a "transformed is not defined" error.
This commit updates the shortcut logic to make `transformed.blah` and `attrs.blah` work consistently in all hbs expressions.
Co-authored-by: Jordan Vidrine <jordan@jordanvidrine.com>
We don't want to show the draft checkmark in the composer when drafts are saved, as it’s a little bit distracting to see it keeps appearing and disappearing. Only in the case of error does it need to show anything, we will be showing a "drafts offline" warning as we did it before.
An important detail is that the warning was appearing and disappearing all the time too. Now, the warning won’t be flashing while a user is typing, it’ll be disappearing only when the draft was eventually saved.
I made a change in https://github.com/discourse/discourse/pull/13083/files to suppress re-throwing the error from popupAjaxError if isTesting() but that causes issues in other places instead. If I remove it I get this error in the group email test I added, so I am removing that test here too.
* DEV: replace swipe events to use translate rather than left/right
translate is better for animations. also use native css animations for opening
and closing.
* a11y: respect prefers reduced motion on mobile timeline
* DEV: reduce jquery usage
* DEV: add tests for menu swipe events
test is run in 50% zoom/transform which means offsets and x of touch events need to be halved
Refactor test window to use a transform rather than non-standard zoom property
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
A followup to e3b0abc and a replacement PR for #13298.
Fixes long topic titles wrapping to a separate line in the dropdown search results.
Also replaces divs that were incorrectly nested inside spans.
* FIX: Quoting Oneboxed content should exclude formatting
When a post is quoted that includes Oneboxed content, we should not include the formatting generated by the Onebox. Rather, we should attempt to collapse the link referenced by the Onebox to a single line text link.
* DEV: fix tests
When a group only has SMTP enabled and not IMAP, we do not
want to enqueue the :group_smtp_email job because using the group's
SMTP credentials for sending user_private_message emails is
handled by the UserNotifications class.
We do not want the :group_smtp_email job to be enqueued because
that uses a reply key instead of the group.email_username
for the reply-to address which is not what we want for SMTP
only, and also creates an IncomingEmail record to prevent IMAP
double syncing which we do not need either.
There is an open question about what happens when IMAP is
enabled after SMTP has been enabled for a while, and also questions
around whether we could do away with :group_smtp_email altogether
and handle everything via EmailLog and UserNotifications, adding
additional columns to the former and modifying the Imap::Sync
class to take this into account...a lot more further testing
for IMAP needs to be done to answer those questions.
For now, this fix should be sufficient to get the correct
reply-to address for user_private_response messages sent in
response to emails sent directly to the group's
email_username SMTP address.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Tag-chooser component expects an array of blocked tags, but was passed
a string instead. That made tag-chooser to not allow any tags that were
a substring of the current one.
In Ember CLI addons get put into the vendor bundle, as opposed to their
own bundle like we're doing in the Rails app. We never use pretty-text
without our vendor bundle so this should have no difference on
performance.
We need to keep the pretty-text bundle for server side cooking.
Rather than returning the size of the currently rendered image in the composer window (which is dependent on browser settings such as window size and zoom level), return the actual dimensions of the image file itself.
(Also see commit abac614492 which was an earlier attempt to fix this by excluding Oneboxed images entirely. That was reverted as the CSS selector didn’t work on all browsers.)
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
If we don't escape periods, they are interpreted as wildcards and it
becomes impossible to visit profiles of other users whose usernames
match. E.g., if your username was `a.c` and attempted to visit `abc`'s
profile, you would be incorrectly redirected to your own profile.
Setting a key/value pair in DistributedCache involves waiting on the
write to Redis to finish. In most cases, we don't need to wait on the
setting of the cache to finish. We just need to take our return value
and move on.
This allows us to do DISTINCT on the topic_id to remove
duplicates (e.g. in extensions to the report SQL), and
also introduces an additional_join_sql string to allow
extensions to JOIN additional tables.
* FIX: Ignore `allowlistgeneric` Onebox image sizes
The size of an image contained within the preview pane of a Composer window may vary depending on the configuration of the browser displaying the Composer (e.g., dimension of browser window, zoom level, etc.).
Presently, the dimensions of the images from the browser creating the post containing the Onebox will be used to render the Onebox to anyone who views the post. It is safer to let the backend figure out the dimensions of the images. Therefore, exclude `.onebox.allowlistedgeneric` images from the list of `image_sizes` sent to the backend.
* DEV: Replace jQuery selector with pure JS
* DEV: remove more jQuery
After editing a post, it is refreshed by two ways. One of them is
triggered by the client side which will route the client to the edited
post and force a reload this way. The other way is via Message Bus.
This commit ignores both of the ways and tries to update the post
immediately and then refresh the post stream.
It used to require SiteSetting.min_trust_level_to_allow_invite to
invite a user to a group, even if the user existed and the inviter was
a group owner.
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
When a topic is fully merged into another topic we close it and schedule its deleting. But, because of a bug, if the merged topic contains some moderator actions or small actions it won't be merged. This change fixes this problem.
An important note: in general, we don't want to close a topic after moving posts if it still contains some regular posts or whispers. But when we are moving posts to a private message we don't want the notice about it to be publicly visible. So we use whispers with action_code == 'split_topic' instead of small_actions in such cases and we should ignore this specific kind of whispers when decide if we should close the merged topic.
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
I merged this PR in yesterday, finally thinking this was done https://github.com/discourse/discourse/pull/12958 but then a wild performance regression occurred. These are the problem methods:
1aa20bd681/app/serializers/topic_tracking_state_serializer.rb (L13-L21)
Turns out date comparison is super expensive on the backend _as well as_ the frontend.
The fix was to just move the `treat_as_new_topic_start_date` into the SQL query rather than using the slower `UserOption#treat_as_new_topic_start_date` method in ruby. After this change, 1% of the total time is spent with the `created_in_new_period` comparison instead of ~20%.
----
History:
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
Previous to this change we would switch off MessageBus updating after 20
minutes.
This ensures that when the user becomes present again we turn on long polling.
Without long polling updates can be delayed for minutes.
The widget should accept the disabled option.
In that case, CSS class "disabled".
In addition, after click dropdown will not be shown.
Also, the option to disable a specific value in a dropdown is included
…and just prioritize the current one, instead of hiding other categories.
Context: when you open the composer by clicking "New Topic" button when in a category, or by clicking "New Topic" in the share-popup, the category selector shows only the current category and its children (and "Uncategorized"). You can still find other categories, but you have to search by name.
This PR changes that, so you now can see all the categories in the dropdown, and those that are relevant (again: current, children and uncategorized) are displayed before all other categories.
tldr: don't make choosing other categories harder - make choosing relevant ones easier.
1. It defaults to `cache: true` already
2. Setting it to `false` for non-GET request doesn't do anything
3. We were correcting `cache: false` GET requests to use `cache: true`
…so setting it to anything at all, for any type of request doesn't make sense (anymore)
When the client received a new notification, it prioritized only PM
notifications instead of maintaining the priority order. Later, the
check for missing notification deleted all notifications that were
in the wrong order because it could not match the IDs.
The correct order puts high_priority AND unread notifications first.
Low priority or read notifications (including high priority, but read
notifications) come after.
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
A non-staff user cannot post to a closed topic, so we should not
show them the modal asking "Which topic do you want to reply to?"
This also fixes an issue I ran into while testing the above change, in
Ember CLI an error was being raised because related messages were being
set inside a computed property.
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
The default `allow_title` column value is "true" for regular and leader badges. After we disable it in admin side the seed method enabling it again while upgrading. So we shouldn't do it for existing badges.
* FIX: Improve GitHub folder regexp in Onebox
It used to match any GitHub URL that was not matched by the other GitHub
Oneboxes and it did not do a good job at handling those. With this
change, the generic Onebox will handle the remaining URLs.
* FEATURE: Add Onebox for GitHub Actions
* FEATURE: Add Onebox for PR check runs
* FIX: Remove image from GitHub folder Oneboxes
It is a generic, auto-generated image which does not provide any value.
* DEV: Add tests
* FIX: Strip HTML comments from PR body
* UX: alert screen readers when there is an issue saving a post
Adds a "alert" role to various popup-input-tips.
This means screen reader users can now tell why a post refuses to save.
Also ensures like icon in the "try the like button" has screen reader support
Previously auto focus would only work on modals that include buttons or
inputs.
To avoid a situation where information modals such as keyboard shortcuts
do not get focus, simply focus on the close button as a fallback.
Previously we would retry push notifications indefinitely for all errors
except for ExpiredSubscription
Under certain conditions other persistent errors may arise such as a persistent
rate limit.
If we track more than 3 errors in a period of time longer than a day we will
delete the subscription
Also performs a bit of internal cleanup to ensure protected methods really
are private.
Admins can visit an approved queued topic from the review queue by clicking their title. We no longer store the created post and topic ids in the reviewable's payload object. Instead, we set the `topic_id` and `target_id` attributes.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
Previously we had no role set for various topic links, nor did we have any
headers.
This teaches screen readers that topic links in topic lists are to be treated
as H2. We opted for this less radical change cause a change of the element
type would probably result in many broken themes.
Confirmed on NVDA you can very quickly breeze through topic lists now. Minor
edge case is pinned topics which can be a bit annoying due to multiple links.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
We now bundle Javascript for each theme/plugin separately, and only ship bundles for enabled plugins to the client. Therefore, these disabled_plugins checks are now redundant, and can be removed.
