What is the problem?
The user messages routes are currently routed by the server to
`UserActionsController#private_messages`. However, the method is
essentially a no-op and does not do any preloading. As a result, when we
load the user private messages routes, the client ends up having to
issue another request to the server to get more information about the
user profile currently being viewed. This extra request is triggered by
the `user` model's `findDetails` method that is called from the `user`
route in the `afterModel` hook.
What is the solution?
The `user` model's `findDetails` method actually checks the preload
store to see if the `user_${username}` key is present in the store and
if it is, it will use the preloaded data instead of triggering another
request. Since the user private messages routes are nested under the
user route on the client side, we have to rely on the
`UsersController#show` controller action on the server side for the user private
messages route as the `UsersController#show` controller action preloads
the required user information for the client side.
Prior to this commit, we didn't have RTL versions of our admin and plugins CSS bundles and we always served LTR versions of those bundles even when users used an RTL locale, causing admin and plugins UI elements to never look as good as when an LTR locale was used. Example of UI issues prior to this commit were: missing margins, borders on the wrong side and buttons too close to each other etc.
This commit creates an RTL version for the admin CSS bundle as well as RTL bundles for all the installed plugins and serves those RTL bundles to users/sites who use RTL locales.
This commit adds modifiers that allow plugins to change how categories and groups are prefetched into the application and listed in the respective controllers.
Possible use cases:
- prevent some categories/groups from being prefetched when the application loads for performance reasons.
- prevent some categories/groups from being listed in their respective index pages.
Allow admins to edit Community section. This includes drag and drop reorder, change names, delete and reset to default.
Visual improvements introduced in edit community section modal are available in edit custom section form as well. For example:
- drag and drop links to change their position;
- smaller icon picker.
This commit introduces a new `within_user_updater_transaction` event that's triggered inside the transaction that saves user updates in `UserUpdater`. Plugins can hook into the transaction using the event to include custom changes in the transaction. Callbacks for this event receive 2 arguments:
1. the user being saved
2. the changed attributes that are passed to `UserUpdater`.
There's also new modifier in this commit called `users_controller_update_user_params` to allow plugins to allowlist custom params in the `UsersController` which eventually end up getting passed as attributes to the `UserUpdater` and the new `within_user_updater_transaction` event where they can be used to perform additional updates using the custom params.
-----
New API is used in https://github.com/discourse/discourse-mailinglist-integration/pull/1.
When a user chooses to move a topic/message to an existing topic/message, they can now opt to merge the posts chronologically (using a checkbox in the UI).
The field more_topic_url is already included in the response preloaded in categories#index
However this field was missing if a request was subsequently made to update the page using
the end-points /categories_and_latest or /categories_and_top. This could lead the client
app to display incorrect information if it relied on this information to update the UI.
This commit deprecates the `modify_user_params` method in `UsersController` in favor of a new modifier that replaces that method whose entire purpose is to allow plugins to monkey-patch it to permit custom params in the controller. We now have the "modifier" system which can achieve the same results but in a safer and easier way. The modifier that replaces the deprecated method is included in PR https://github.com/discourse/discourse/pull/21737.
What is this change required?
I noticed that actions in `SidebarSectionsController` resulted in
lots of N+1 queries problem and I wanted a solution to
prevent such problems without having to write N+1 queries tests. I have
also used strict loading for `SidebarSection` queries in performance
sensitive spots.
Note that in this commit, I have also set `config.active_record.action_on_strict_loading_violation = :log`
for the production environment so that we have more visibility of
potential N+1 queries problem in the logs. In development and test
environment, we're sticking with the default of raising an error.
When uploading images via direct to S3 upload, we were
assuming that we could not pre-emptively check the file
size because the client may do preprocessing to reduce
the size, and UploadCreator could also further reduce the
size.
This, however, is not true of gifs, so we would have an
issue where you upload a gif > the max_image_size_kb
setting and had to wait until the upload completed for
this error to show.
Now, instead, when we direct upload gifs to S3, we check
the size straight away and present a file size error to
the user rather than making them wait. This will increase
meme efficiency by approximately 1000%.
What is the problem?
In `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search`, the controller actions
was using the `RailsMultisite::ConnectionManagement.with_hostname` API
but `params[:hostname]` was always `nil` because the routes does not
have a `:hostname` param component and the client does not ever pass the
`:hostname` param when making the request. When `RailsMultisite::ConnectionManagement.with_hostname` is
used with a `nil` argument, it ends up connecting to the default
multisite database. Usually this would be bad because we're allowing a
site in a multisite setup to connect to another site but thankfully no
private data is being leaked here.
What is the fix?
Since `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search` are login required route,
there is no need for us to switch database connections. The fix here is
to simply remove the use of `RailsMultisite::ConnectionManagement.with_hostname`.
### What is the problem?
It is possible to pass an arbitrary value to the limit parameter in `TagsController#search`, and have it flow through `DiscourseTagging.filter_allowed_tags` where it will raise an error deep in the database driver. MiniSql ensures there's no injection happening, but that ultimately results in an invalid query.
### How does this fix it?
This change checks more strictly that the parameter can be cleanly converted to an integer by replacing the loose `#to_i` conversion semantics with the stronger `Kernel#Integer` ones.
**Example:**
```ruby
"1; SELECT 1".to_i
#=> 1
Integer("1; SELECT 1")
#=> ArgumentError
```
As part of the change, I also went ahead to disallow a limit of "0", as that doesn't seem to be a useful option. Previously only negative limits were disallowed.
* DEV: move sidebar community section to database
Before, community section was hard-coded. In the future, we are planning to allow admins to edit it. Therefore, it has to be moved to database to `custom_sections` table.
Few steps and simplifications has to be made:
- custom section was hidden behind `enable_custom_sidebar_sections` feature flag. It has to be deleted so all forums, see community section;
- migration to add `section_type` column to sidebar section to show it is a special type;
- migration to add `segment` column to sidebar links to determine if link should be displayed in primary section or in more section;
- simplify more section to have one level only (secondary section links are merged);
- ensure that links like `everything` are correctly tracking state;
- make user an anonymous links position consistence. For example, from now on `faq` link for user and anonymous is visible in more tab;
- delete old community-section template.
We are seeing issues with the composer not being able to close due to the addition of a error message when rescuing from `Draft::OutOfSequence`. This PR will revert to the original solution implemented prior to https://github.com/discourse/discourse/pull/21148 that just silently rescues from `Draft::OutOfSequence`
This PR adds the ability to destroy reviewables for a passed user via the API. This was not possible before as this action was reserved for reviewables for you created only.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a reviewable for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal reviewable and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the reviewable.
This PR adds the ability to destroy drafts for a passed user via the API. This was not possible before as this action was reserved for only your personal drafts.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a draft for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal draft and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the draft.
* FEATURE: add a setting to allowlist DiscourseConnect return path domains
This commit adds a site setting to allowlist DiscourseConnect return
path domains. The setting needs supports exact domain or wildcard
character (*) to allow for any domain as return path.
* Add more specs to clarify what is allowed in site setting
* Update setting description to explain what is allowed
Previously, public custom sections were only visible to logged-in users. In this PR, we are making them visible to anonymous as well.
The reason is that Community Section will be moved into custom section model to be easily editable by admins.
The following are the changes being introduced in this commit:
1. Instead of mapping the query language to various query params on the
client side, we've decided that the benefits of having a more robust
query language far outweighs the benefits of having a more human readable query params in the URL.
As such, the `/filter` route will just accept a single `q` query param
and the query string will be parsed on the server side.
1. On the `/filter` route, the tags filtering query language is now
supported in the input per the example provided below:
```
tags:bug+feature tagged both bug and feature
tags:bug,feature tagged either bug or feature
-tags:bug+feature excluding topics tagged bug and feature
-tags:bug,feature excluding topics tagged bug or feature
```
The `tags` filter can also be specified multiple
times in the query string like so `tags:bug tags:feature` which will
filter topics that contain both the `bug` tag and `feature` tag. More
complex query like `tags:bug+feature -tags:experimental` will also work.
This corrects two issues:
1. We were double serializing topic tracking state (as_json calls were not cached)
2. We were inefficiently serializing items by instantiating extra objects
Why is this change required?
Prior to this change, we would list all group messages that a user
has access to in the user menu messages notifications panel dropdown.
However, this did not respect the topic's notification level setting and
group messages which the user has set to 'normal' notification level were
being displayed
What does this commit do?
With this commit, we no longer display all group messages that a user
has access to. Instead, we only display group messages that a user is
watching in the user menu messages notifications panel dropdown.
Internal Ref: /t/94392
Currently the auto-bump cooldown is hard-coded to 24 hours.
This change makes the highlighted 24 hours part configurable (defaulting to 24 hours), and the rest of the process remains the same.
This uses the new CategorySetting model associated with Category. We decided to add this because we want to move away from custom fields due to the lack of type casting and validations, but we want to keep the loading of these optional as they are not needed for almost all of the flows.
Category settings will be back-filled to all categories as part of this change, and creating a new category will now also create a category setting.
This commit implements many changes to topic and comments embedding. It
deprecates the class_name field from EmbeddableHost and suggests using
the className parameter. discourse_username parameter has been
deprecated and it will fetch it from embedded site from the author or
discourse-username meta.
See the updated code sample from Admin > Customize > Embedding page.
* FEATURE: Add className parameter for Discourse embed
* DEV: Hide class_name from EmbeddableHost
* DEV: Deprecate class_name field of EmbeddableHost
* FEATURE: Use either author or discourse-username meta tag
* DEV: Deprecate discourse_username parameter
* DEV: Improve embed code sample
