This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
* hidden siteSetting to enable experimental sidebar
* user preference to enable experimental sidebar
* `experimental_sidebar_enabled` attribute for current user
* Empty glimmer component for Sidebar
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
It used to show the warning that said only members of certain groups
could view the topic even if the group "everyone" was listed in
category's permission list.
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
* FEATURE: Let sites add a sitemap.xml file.
This PR adds the same features discourse-sitemap provides to core. Sitemaps are only added to the robots.txt file if the `enable_sitemap` setting is enabled and `login_required` disabled.
After merging discourse/discourse-sitemap#34, this change will take priority over the sitemap plugin because it will disable itself. We're also using the same sitemaps table, so our migration won't try to create it
again using `if_not_exists: true`.
After this commit, category group permissions can only be seen by users
that are allowed to manage a category. In the past, we inadvertently
included a category's group permissions settings in `CategoriesController#show`
and `CategoriesController#find_by_slug` endpoints for normal users when
those settings are only a concern to users that can manage a category.
There are still some, but those are in actual code that's used outside core, so the change there would need to go through the deprecation cycle. That's a task for another day.
Previously we only supported a single 'required tag group' for a category. This commit allows admins to specify multiple required tag groups, each with their own minimum tag count.
A new category_required_tag_groups database table replaces the existing columns on the categories table. Data is automatically migrated.
This did not work properly everytime because the destination URL was
saved in a cookie and that can be lost for various reasons. This commit
redirects the user to invited topic if it exists.
Previous to this change if any of the assets were not allowed extensions
they would simply be silently ignored, this could lead to broken themes
that are very hard to debug
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
Since we give a 200 response for login errors, we should be checking
whether the error key exists in each case or not.
Some tests were broken, because they weren't checking.
* FIX: Redirect if Discourse-Xhr-Redirect is present
`handleRedirect` was passed an wrong argument type (a string) instead of
a jqXHR object and missed the fields checked in condition, thus always
evaluating to `false`.
* FIX: Add `errors` field if group update confirmation
An explicit confirmation about the effect of the group update is
required if the default notification level changes. Previously, if the
confirmation was missing the API endpoint failed silently returning
a 200 response code and a `user_count` field. This change ensures that
a proper error code is returned (422), a descriptive error message and
the additional information in the `user_count` field.
This commit also refactors the API endpoint to use the
`Discourse-Xhr-Redirect` header to redirect the user if the group is
no longer visible.
Previously we would issue a 403 for all invalid routes under `/tags/c/...`, which is not semantically correct. In some cases, these 403'd routes would then be handled successfully in the Ember app, leading to some very confusing behavior.
* DEV: Allow params to be passed on topic redirects
There are several places where we redirect a url to a standard topic url
like `/t/:slug/:topic_id` but we weren't always passing query parameters
to the new url.
This change allows a few more query params to be included on the
redirect. The new params that are permitted are page, print, and
filter_top_level_replies. Any new params will need to be specified.
This also prevents the odd trailing empty page param that would
sometimes appear on a redirect. `/t/:slug/:id.json?page=`
* rubocop: fix missing space after comma
* fix another page= reference
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
This update topic route has never worked. Better late than never. I am
in favor of using non-slug urls when using the api so I do think we
should fix this route.
Just thought I would update the `:id` param to `:topic_id` here in the
routes file instead of updating the controller to handle both params.
Added a spec to test this route.
Also added the same constraint we have on other topic routes to ensure
we only pass in an ID that is a digit.
Previously, if an admin user tried to add/remove
users to another user's ignored list, it would
be added to their own ignore list because the
controller used current_user. Now for admins only
a source_user_id parameter can be passed through,
which will be used to ignore the target user for
that source user.
When creating files with create-multipart, if the file
size was somehow zero we were showing a very unhelpful
error message to the user. Now we show a nicer message,
and proactively don't call the API if we know the file
size is 0 bytes in JS, along with extra console logging
to help with debugging.
This change adds support for the categories endpoint to have an api
scope. Only adds GET scope for listing categories and for fetching a
single category.
See: https://meta.discourse.org/t/218080/4
This PR adds an extra description to the 2FA page when granting a user admin access. It also introduces a general system for adding customized descriptions that can be used by future actions.
(Follow-up to dd6ec65061)
Discourse users and associated accounts are created or updated when a
user logins or connects the account using their account preferences.
This new API can be used to create associated accounts and users too,
if necessary.
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This feature was rarely used, could be used for spamming users and was
impossible to add a context to why the user was notified of a topic. A
simple private messages that includes the link and personalized message
can be used instead.
* DEV: Show only top level replies
Adds a new query param to the topic view so that we can filter out posts
that aren't top level replies. If a post is a reply to another post
instead of the original topic post we should not include it in the
response if the `filter_top_level_replies` query param is present.
* add rspec test
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
Currently, providing things like `filter[%24acunetix]=1` to
`UserActionsController#index` will throw an exception because instead of
getting a string as expected, we get a hash instead.
This patch simply uses `#permit` from strong parameters properly: first
we apply it on the whole parameters, this way it filters the keys we’re
interested in. By doing this, if the value is a hash for example, the
whole key/value pair will be ignored completely.
aa1442fdc3 split theme stylesheets so that every component gets its own stylesheet. Therefore, there is now no need for parent themes to collate the settings/variables of its children during scss compilation.
Technically this is a breaking change for any themes which depend on the settings/variables of their child components. That was never a supported/recommended arrangement, so we don't expect this to cause issues.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
We serve `service-worker.js` in an unusual way, which means that the sourcemap is not available on an adjacent path. This means that the browser fails to fetch the map, and shows an error in the console.
This commit re-writes the source map reference in the static_controller to be an absolute link to the asset (including the appropriate CDN, if enabled), and adds a spec for the behavior.
It's important to do this at runtime, rather than JS precompile time, so that changes to CDN configuration do not require re-compilation to take effect.
* DEV: Document external topic id endpoints
This commit documents the existing Create Topic endpoint with the
`external_id` param and documents the new get topic by external id
endpoint.
It also refactors the existing topic show endpoint to use the new format
where we load the expected json schema response from a file.
See: 71f7f7ed49
* clean up unused test variables
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
This adds logic to increase an `InvitedUser` record, increase
`redemption_count` and create a `:invitee_accepted` to let the inviter
know that the invitee used the invite.
Initial support for this was implemented in commit 9969631.
Sorting group members worked always kept the group owners at the top of
the list. This commit keeps the group owners at the top of the list only
when no order exists.
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
When the record is not saved, we should display a proper message.
One potential reason can be plugins for example discourse-calendar is specifying that only first post can contain event
* FIX: Remove svg icons from webmanifest shortcuts
While SVGs are valid in the webmanifest, Chromium has not implemented
support for it in this specific manifest member.
Revert when https://bugs.chromium.org/p/chromium/issues/detail?id=1091612
lands.
* fix test
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
When staff visits the user profile of another user, the `email` field
in the model is empty. In this case, staff cannot send the reset email
password because nothing is passed in the `login` field.
This commit changes the behavior for staff users to allow resetting
password by username instead.
In the unlikely, but possible, scenario where a user has no email_tokens, and has an invite record for their email address, login would fail. This commit fixes the `Invite` `user_doesnt_already_exist` validation so that it only applies to new invites, or when changing the email address.
This regressed in d8fe0f4199 (based on `git bisect`)
The UI used to request a password reset by username when the user was
logged in. This did not work when hide_email_already_taken site setting
was enabled, which disables the lookup-by-username functionality.
This commit also introduces a check to ensure that the parameter is an
email when hide_email_already_taken is enabled as the single allowed
type is email (no usernames are allowed).
* FIX: Tag watching for everyone tag groups
Tags in tag groups that have permissions set to everyone were not able
to be saved correctly. A user on their preferences page would mark the
tags that they wanted to save, but the watched_tags in the response
would be empty. This did not apply to admins, just regular users. Even
though the watched tags were being saved in the db, the user serializer
response was filtering them out. When a user refreshed their preferences
pages it would show zero watched tags.
This appears to be a regression introduced by:
0f598ca51e
The issue that needed to be fixed is that we don't track the "everyone"
group (which has an id of 0) in the group_users table. This is because
everyone has access to it, so why fill a row for every single user, that
would be a lot. The fix was to update the query to include tag groups
that had permissions set to the "everyone" group (group_id 0).
I also added another check to the existing spec for updating
watched tags for tags that aren't in a tag group so that it checks the
response body. I then added a new spec which updates watched tags for
tags in a tag group which has permissions set to everyone.
* Resolve failing tests
Improve SQL query syntax for including the "everyone" group with the id
of 0.
This commit also fixes a few failing tests that were introduced. It
turns out that the Fabrication of the Tag Group Permissions was faulty.
What happens when creating the tag groups without any permissions is
that it sets the permission to "everyone". If we then follow up with
fabricating a tag group permission on the tag group instead of having a
single permission it will have 2 (everyone + the group specified)! We
don't want this. To fix it I removed the fabrication of tag group
permissions and just set the permissions directly when creating the tag
group.
* Use response.parsed_body instead of JSON.parse
* FEATURE: Export topics to markdown
The route `/raw/TOPIC_ID` will now export whole topics (paginated to 100
posts) in a markdown format.
See https://meta.discourse.org/t/-/152185/12
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
The new warnings cover more cases and more accurate. Most of the
warnings will be visible only to staff members because otherwise they
would leak information about user's preferences.
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
Adding a spec for documenting the delete post API endpoint for our api
docs. As part of this added detailed info for the `force_destroy`
parameter for permanently deleting a post.
Tests fail in Ruby 3.0 and later due to separation of positional and
keyword arguments. RSpec treats the hash at the end of include_examples
as keyword arguments when it should be passed as a positional argument.
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
This allows authenticators to instruct the Auth::Result to override attributes without using the general site settings. This provides an easy migration path for auth plugins which offer their own "overrides email", "overrides username" or "overrides name" settings. With this new api, they can set `overrides_*` on the result object, and the attribute will be overriden regardless of the general site setting.
ManagedAuthenticator is updated to use this new API. Plugins which consume ManagedAuthenticator will instantly take advantage of this change.
This commit adds API documentation for the new upload
endpoints related to direct + multipart external uploads.
Also included is a rake task which watches the files in
the spec/requests/api directory and calls a script file
(spec/regenerate_swagger_docs) whenever one changes. This
script runs rake rswag:specs:swaggerize and then copies
the openapi.yml file over to the discourse_api_docs repo
directory, and hits a script there to convert the YML to
JSON so the API docs are refreshed while the server is
still running. This makes the loop of making a doc change
and seeing it in the local server much faster.
The rake task is rake autospec:swagger
* FEATURE: hide_email_address_taken forces use of email in forgot password form
This strengthens this site setting which is meant to be used to harden sites
that are experiencing abuse on forgot password routes.
Previously we would only deny letting people know if forgot password worked on not
New change also bans usage of username for forgot password when enabled
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
Some time ago, we made this fix to external authentication – https://github.com/discourse/discourse/pull/13706. We didn't address Discourse Connect (https://meta.discourse.org/t/discourseconnect-official-single-sign-on-for-discourse-sso/13045) at that moment, so I wanted to fix it for Discourse Connect as well.
Turned out though that Discourse Connect doesn't contain this problem and already handles staged users correctly. This PR adds tests that confirm it. Also, I've extracted two functions in Discourse Connect implementation along the way and decided to merge this refactoring too (the refactoring is supported with tests).
A plugin API that allows customizing existing topic-backed static pages, like:
faq, tos, privacy (see: StaticController) The block passed to this
method has to return a SiteSetting name that contains a topic id.
```
add_topic_static_page("faq") do |controller|
current_user&.locale == "pl" ? "polish_faq_topic_id" : "faq_topic_id"
end
```
You can also add new pages in a plugin, but remember to add a route,
for example:
```
get "contact" => "static#show", id: "contact"
```
We can fake redis transactions so that `fab!` works for redis and PG
data, but it's too slow to be used indiscriminately. Instead, you can
opt into it with the `use_redis_snapshotting` helper.
Insofar as snapshotting allows us to `fab!` more things, it provides a
speedup.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
We don't need it anymore. Actually, I removed using of it on the client side a long time ago, when I was working on improving blank page syndrome on user activity pages (see https://github.com/discourse/discourse/pull/14311).
This PR also removes some old resource strings that we don't use anymore. We have new strings for blank pages.
Documenting the `/u/:username:/emails.json` endpoint.
Also removing some email fields from user api responses because they
aren't actually included in the response unless you are querying
yourself.
When redirecting to login, we store a destination_url cookie, which the user is then redirected to after login. We never want the user to be redirected to a JSON URL. Instead, we should return a 403 in these situations.
This should also be much less confusing for API consumers - a 403 is a better representation than a 302.
Related to: 20f736aa11.
`auto_update` is true by default at the database level, but it doesn't make sense for `auto_update` to be true on themes that are not imported from a Git repository.
Under some conditions, these varied responses could lead to cache poisoning, hence the 'security' label.
Previously the Rails application would serve JSON data in place of HTML whenever Ember CLI requested an `application.html.erb`-rendered page. This commit removes that logic, and instead parses the HTML out of the standard response. This means that Rails doesn't need to customize its response for Ember CLI.
Recently, the wrong new behavior appeared – we started to suggest to invited users usernames like "user1".
To reproduce:
1. Create an invitation with default settings, do not restrict it to email
2. Copy an invitation link and follow it in incognito mode
See username already filled, with eg “user1”. See screenshot. Should be empty.
This bug was very likely introduced by my recent changes to UserNameSuggester.
We have a couple of site setting, `slow_down_crawler_user_agents` and `slow_down_crawler_rate`, that are meant to allow site owners to signal to specific crawlers that they're crawling the site too aggressively and that they should slow down.
When a crawler is added to the `slow_down_crawler_user_agents` setting, Discourse currently adds a `Crawl-delay` directive for that crawler in `/robots.txt`. Unfortunately, many crawlers don't support the `Crawl-delay` directive in `/robots.txt` which leaves the site owners no options if a crawler is crawling the site too aggressively.
This PR replaces the `Crawl-delay` directive with proper rate limiting for crawlers added to the `slow_down_crawler_user_agents` list. On every request made by a non-logged in user, Discourse will check the User Agent string and if it contains one of the values of the `slow_down_crawler_user_agents` list, Discourse will only allow 1 request every N seconds for that User Agent (N is the value of the `slow_down_crawler_rate` setting) and the rest of requests made within the same interval will get a 429 response.
The `slow_down_crawler_user_agents` setting becomes quite dangerous with this PR since it could rate limit lots if not all of anonymous traffic if the setting is not used appropriately. So to protect against this scenario, we've added a couple of new validations to the setting when it's changed:
1) each value added to setting must 3 characters or longer
2) each value cannot be a substring of tokens found in popular browser User Agent. The current list of prohibited values is: apple, windows, linux, ubuntu, gecko, firefox, chrome, safari, applewebkit, webkit, mozilla, macintosh, khtml, intel, osx, os x, iphone, ipad and mac.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
* FEATURE: Optionally send a 'noindex' header in non-canonical responses
This will be used in a SEO experiment.
Co-authored-by: David Taylor <david@taylorhq.com>
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
Uppy adds the file name as the "name" parameter in the
payload by default, which means that for things like the
emoji uploader which have a name param used by the controller,
that param will be passed as the file name. We already use
the existing file name if the name param is null, so this
commit just does further cleanup of the name param, removing
the extension if it is a filename so we don't end up with
emoji names like blah_png.
Uppy and Resumable slice up their chunks differently, which causes a difference
in this algorithm. Let's take a 131.6MB file (137951695 bytes) with a 5MB (5242880 bytes)
chunk size. For resumable, there are 26 chunks, and uppy there are 27. This is
controlled by forceChunkSize in resumable which is false by default. The final
chunk size is 6879695 (chunk size + remainder) whereas in uppy it is 1636815 (just remainder).
This means that the current condition of uploaded_file_size + current_chunk_size >= total_size
is hit twice by uppy, because it uses a more correct number of chunks. This
can be solved for both uppy and resumable by checking the _previous_ chunk
number * chunk_size as the uploaded_file_size.
An example of what is happening before that change, using the current
chunk number to calculate uploaded_file_size.
chunk 26: resumable: uploaded_file_size (26 * 5242880) + current_chunk_size (6879695) = 143194575 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (5242880) = 141557760 >= total_size (137951695) ? YES
chunk 27: uppy: uploaded_file_size (27 * 5242880) + current_chunk_size (1636815) = 143194575 >= total_size (137951695) ? YES
An example of what this looks like after the change, using the previous
chunk number to calculate uploaded_file_size:
chunk 26: resumable: uploaded_file_size (25 * 5242880) + current_chunk_size (6879695) = 137951695 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (25 * 5242880) + current_chunk_size (5242880) = 136314880 >= total_size (137951695) ? NO
chunk 27: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (1636815) = 137951695 >= total_size (137951695) ? YES
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
Support for invites alongside DiscourseConnect was added in 355d51af. This commit fixes the guardian method so that the bulk invite button functionality also works.
* FIX: allowed_theme_ids should not be persisted in GlobalSettings
It was observed that the memoized value of `GlobalSetting.allowed_theme_ids` would be persisted across requests, which could lead to unpredictable/undesired behaviours in a multisite environment.
This change moves that logic out of GlobalSettings so that the returned theme IDs are correct for the current site.
Uses get_set_cache, which ultimately uses DistributedCache, which will take care of multisite issues for us.
By default, Rails only includes the Vary:Accept header in responses when the Accept: header is included in the request. This means that proxies/browsers may cache a response to a request with a missing Accept header, and then later serve that cached version for a request which **does** supply the Accept header. This can lead to some very unexpected behavior in browsers.
This commit adds the Vary:Accept header for all requests, even if the Accept header is not present in the request. If a format parameter (e.g. `.json` suffix) is included in the path, then the Accept header is still omitted. (The format parameter takes precedence over any Accept: header, so the response is no longer varies based on the Accept header)
`/u/username/invited.json?filter=expired` and `/u/username/invited.json?filter=pending` APIs are already returning data to admins. However, the `can_see_invite_details?` boolean was false, which prevented the Ember frontend from showing the tabs correctly. This commit updates the guardian method to match reality.
* FIX: do not display add to calendar for past dates
There is no value in saving past dates into calendar
* FIX: remove postId and move ICS to frontend
PostId is not necessary and will make the solution more generic for dates which doesn't belong to a specific post.
Also, ICS file can be generated in JavaScript to avoid calling backend.
Sometimes administrators want to permanently delete posts and topics
from the database. To make sure that this is done for a good reasons,
administrators can do this only after one minute has passed since the
post was deleted or immediately if another administrator does it.
- Allow the `/presence/get` endpoint to return multiple channels in a single request (limited to 50)
- When multiple presence channels are initialized in a single Ember runloop, batch them into a single GET request
- Introduce the `presence-pretender` to allow easy testing of PresenceChannel-related features
- Introduce a `use_cache` boolean (default true) on the the server-side PresenceChannel initializer. Useful during testing.
Change the type for default_calendar to a string.
The type specified for the default calendar in the api docs wasn't a
valid type. The linting in the api docs repo reports:
```
`type` can be one of the following only: "object", "array", "string", "number", "integer", "boolean", "null".
```
This linting currently is only in the `discourse_api_docs` repo.
* DEV: Add include_subcategories param to api docs
Adding the `include_subcategories=true` query param to the
`/categories.json` api docs.
Follow up to: fe676f334a
* fix spec
It allows saving local date to calendar.
Modal is giving option to pick between ics and google. User choice can be remembered as a default for the next actions.
* FEATURE: Return subcategories on categories endpoint
When using the API subcategories will now be returned nested inside of
each category response under the `subcategory_list` param. We already
return all the subcategory ids under the `subcategory_ids` param, but
you then would have to make multiple separate API calls to fetch each of
those subcategories. This way you can get **ALL** of the categories
along with their subcategories in a single API response.
The UI will not be affected by this change because you need to pass in
the `include_subcategories=true` param in order for subcategories to be
returned.
In a follow up PR I'll add the API scoping for fetching categories so
that a readonly API key can be used for the `/categories.json` endpoint. This
endpoint should be used instead of the `/site.json` endpoint for
fetching a sites categories and subcategories.
* Update PR based on feedback
- Have spec check for specific subcategory
- Move comparison check out of loop
- Only populate subcategory list if option present
- Remove empty array initialization
- Update api spec to allow null response
* More PR updates based on feedback
- Use a category serializer for the subcategory_list
- Don't include the subcategory_list param if empty
- For the spec check for the subcategory by id
- Fix spec to account for param not present when empty
This commit resolves refactors can_invite_to? to use
can_invite_to_forum? for checking the site-wide permissions and then
perform topic specific checkups.
Similarly, can_invite_to? is always used with a topic object and this is
now enforced.
There was another problem before when `must_approve_users` site setting
was not checked when inviting users to forum, but was checked when
inviting to a topic.
Another minor security issue was that group owners could invite to
group topics even if they did not have the minimum trust level to do
it.
It was possible to see notifications of other users using routes:
- notifications/responses
- notifications/likes-received
- notifications/mentions
- notifications/edits
We weren't showing anything private (like notifications about private messages), only things that're publicly available in other places. But anyway, it feels strange that it's possible to look at notifications of someone else. Additionally, there is a risk that we can unintentionally leak something on these pages in the future.
This commit restricts these routes.
The file size error messages for max_image_size_kb and
max_attachment_size_kb are shown to the user in the KB
format, regardless of how large the limit is. Since we
are going to support uploading much larger files soon,
this KB-based limit soon becomes unfriendly to the end
user.
For example, if the max attachment size is set to 512000
KB, this is what the user sees:
> Sorry, the file you are trying to upload is too big (maximum
size is 512000KB)
This makes the user do math. In almost all file explorers that
a regular user would be familiar width, the file size is shown
in a format based on the maximum increment (e.g. KB, MB, GB).
This commit changes the behaviour to output a humanized file size
instead of the raw KB. For the above example, it would now say:
> Sorry, the file you are trying to upload is too big (maximum
size is 512 MB)
This humanization also handles decimals, e.g. 1536KB = 1.5 MB
Allows creating a bookmark with the `for_topic` flag introduced in d1d2298a4c set to true. This happens when clicking on the Bookmark button in the topic footer when no other posts are bookmarked. In a later PR, when clicking on these topic-level bookmarks the user will be taken to the last unread post in the topic, not the OP. Only the OP can have a topic level bookmark, and users can also make a post-level bookmark on the OP of the topic.
I had to do some pretty heavy refactors because most of the bookmark code in the JS topics controller was centred around instances of Post JS models, but the topic level bookmark is not centred around a post. Some refactors were just for readability as well.
Also removes some missed reminderType code from the purge in 41e19adb0d
Due to the way that rswag expands shared components we were getting this
warning when linting our api docs:
```
Component: "user_response" is never used.
```
This change refactors the `api/users_spec.rb` file so that it uses the
new way of doing things with a separate `user_get_response.json` schema
file rather then the old way of loading a shared response inside of the
swagger_helper.rb file.
The color_scheme_id needs to be an integer not a string.
This is one of the failing tests that showed this error:
https://github.com/discourse/discourse/runs/3598414971
It showed this error
`POSSIBLE ISSUE W/: /user_themes/0/color_scheme_id`
And this is part of the site.json response:
```
...
"user_themes"=>[{"theme_id"=>149, "name"=>"Cool theme 111", "default"=>false, "color_scheme_id"=>37}]
...
```
We don't actually use the reminder_type for bookmarks anywhere;
we are just storing it. It has no bearing on the UI. It used
to be relevant with the at_desktop bookmark reminders (see
fa572d3a7a)
This commit marks the column as readonly, ignores it, and removes
the index, and it will be dropped in a later PR. Some plugins
are relying on reminder_type partially so some stubs have been
left in place to avoid errors.
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
Administrators can use second factor to confirm granting admin access
without using email. The old method of confirmation via email is still
used as a fallback when second factor is unavailable.
The previous excerpt was a simple truncated raw message. Starting with
this commit, the raw content of the draft is cooked and an excerpt is
extracted from it. The logic for extracting the excerpt mimics the the
`ExcerptParser` class, but does not implement all functionality, being
a much simpler implementation.
The two draft controllers have been merged into one and the /draft.json
route has been changed to /drafts.json to be consistent with the other
route names.
When a user archives a personal message, they are redirected back to the
inbox and will refresh the list of the topics for the given filter.
Publishing an event to the user results in an incorrect incoming message
because the list of topics has already been refreshed.
This does mean that if a user has two tabs opened, the non-active tab
will not receive the incoming message but at this point we do not think
the technical trade-offs are worth it to support this feature. We
basically have to somehow exclude a client from an incoming message
which is not easy to do.
Follow-up to fc1fd1b416
At this point in time, we do not think supporting unread and new when an
admin is looking at another user's messages is worth supporting.
Follow-up to fc1fd1b416
From the openapi spec:
https://spec.openapis.org/oas/latest.html#fixed-fields-7
each endpoint needs to have an `operationId`:
> Unique string used to identify the operation. The id MUST be unique
> among all operations described in the API. The operationId value is
> case-sensitive. Tools and libraries MAY use the operationId to uniquely
> identify an operation, therefore, it is RECOMMENDED to follow common
> programming naming conventions.
Running the linter on our openapi.json file with this command:
`npx @redocly/openapi-cli lint openapi.json`
produced the following warning on all of our endpoints:
> Operation object should contain `operationId` field
This commit resolves these warnings by adding an operationId field to
each endpoint.
Previously, a group's `default_notification_level` change will only affect the users added after it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
PresenceChannel aims to be a generic system for allow the server, and end-users, to track the number and identity of users performing a specific task on the site. For example, it might be used to track who is currently 'replying' to a specific topic, editing a specific wiki post, etc.
A few key pieces of information about the system:
- PresenceChannels are identified by a name of the format `/prefix/blah`, where `prefix` has been configured by some core/plugin implementation, and `blah` can be any string the implementation wants to use.
- Presence is a boolean thing - each user is either present, or not present. If a user has multiple clients 'present' in a channel, they will be deduplicated so that the user is only counted once
- Developers can configure the existence and configuration of channels 'just in time' using a callback. The result of this is cached for 2 minutes.
- Configuration of a channel can specify permissions in a similar way to MessageBus (public boolean, a list of allowed_user_ids, and a list of allowed_group_ids). A channel can also be placed in 'count_only' mode, where the identity of present users is not revealed to end-users.
- The backend implementation uses redis lua scripts, and is designed to scale well. In the future, hard limits may be introduced on the maximum number of users that can be present in a channel.
- Clients can enter/leave at will. If a client has not marked itself 'present' in the last 60 seconds, they will automatically 'leave' the channel. The JS implementation takes care of this regular check-in.
- On the client-side, PresenceChannel instances can be fetched from the `presence` ember service. Each PresenceChannel can be used entered/left/subscribed/unsubscribed, and the service will automatically deduplicate information before interacting with the server.
- When a client joins a PresenceChannel, the JS implementation will automatically make a GET request for the current channel state. To avoid this, the channel state can be serialized into one of your existing endpoints, and then passed to the `subscribe` method on the channel.
- The PresenceChannel JS object is an ember object. The `users` and `count` property can be used directly in ember templates, and in computed properties.
- It is important to make sure that you `unsubscribe()` and `leave()` any PresenceChannel objects after use
An example implementation may look something like this. On the server:
```ruby
register_presence_channel_prefix("site") do |channel|
next nil unless channel == "/site/online"
PresenceChannel::Config.new(public: true)
end
```
And on the client, a component could be implemented like this:
```javascript
import Component from "@ember/component";
import { inject as service } from "@ember/service";
export default Component.extend({
presence: service(),
init() {
this._super(...arguments);
this.set("presenceChannel", this.presence.getChannel("/site/online"));
},
didInsertElement() {
this.presenceChannel.enter();
this.presenceChannel.subscribe();
},
willDestroyElement() {
this.presenceChannel.leave();
this.presenceChannel.unsubscribe();
},
});
```
With this template:
```handlebars
Online: {{presenceChannel.count}}
<ul>
{{#each presenceChannel.users as |user|}}
<li>{{avatar user imageSize="tiny"}} {{user.username}}</li>
{{/each}}
</ul>
```
The generate_presigned_put endpoint for direct external uploads
(such as the one for the uppy-image-uploader) records allowed
S3 metadata values on the uploaded object. We use this to store
the sha1-checksum generated by the UppyChecksum plugin, for later
comparison in ExternalUploadManager.
However, we were not doing this for the create_multipart endpoint,
so the checksum was never captured and compared correctly.
Also includes a fix to make sure UppyChecksum is the last preprocessor to run.
It is important that the UppyChecksum preprocessor is the last one to
be added; the preprocessors are run in order and since other preprocessors
may modify the file (e.g. the UppyMediaOptimization one), we need to
checksum once we are sure the file data has "settled".
Users can invite people to topic and they will be automatically
redirected to the topic when logging in after signing up. This commit
ensures a "invited_to_topic" notification is created when the invite is
redeemed.
The same notification is used for the "Notify" sharing method that is
found in share topic modal.
Since ad3ec5809f when a user chooses
the Dismiss New... option in the New topic list, we send a request
to topics/reset-new.json with ?tracked=false as the only parameter.
This then uses Topic as the scope for topics to dismiss, with no
other limitations. When we do topic_scope.pluck(:id), it gets the
ID of every single topic in the database (that is not deleted) to
pass to TopicsBulkAction, causing a huge query with severe performance
issues.
This commit changes the default scope to use
`TopicQuery.new(current_user).new_results(limit: false)`
which should only use the topics in the user's New list, which
will be a much smaller list, depending on the user's "new_topic_duration_minutes"
setting.
There are certain design decisions that were made in this commit.
Private messages implements its own version of topic tracking state because there are significant differences between regular and private_message topics. Regular topics have to track categories and tags while private messages do not. It is much easier to design the new topic tracking state if we maintain two different classes, instead of trying to mash this two worlds together.
One MessageBus channel per user and one MessageBus channel per group. This allows each user and each group to have their own channel backlog instead of having one global channel which requires the client to filter away unrelated messages.
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
* FIX: Revoking admin or moderator status doesn't require refresh to delete/anonymize/merge user
On the /admin/users/<id>/<username> page, there are action buttons that are either visible or hidden depending on a few fields from the AdminDetailsSerializer: `can_be_deleted`, `can_be_anonymized`, `can_be_merged`, `can_delete_all_posts`.
These fields are updated when granting/revoking admin or moderator status. However, those updates were not being reflected on the page. E.g. if a user is granted moderation privileges, the 'anonymize user' and 'merge' buttons still appear on the page, which is inconsistent with the backend state of the user. It requires refreshing the page to update the state.
This commit fixes that issue, by syncing the client model state with the server state when handling a successful response from the server. Now, when revoking privileges, the buttons automatically appear without refreshing the page. Similarly, when granting moderator privileges, the buttons automatically disappear without refreshing the page.
* Add detailed user response to spec for changed routes.
Add tests to verify that the revoke_moderation, grant_moderation, and revoke_admin routes return a response formatted according to the AdminDetailedUserSerializer.
This is useful in the DiscourseHub mobile app, currently the app queries
the `about.json` endpoint, which can raise a CORS issue in some cases,
for example when the site only accepts logins from an external provider.
`nullable` is no longer a valid type, and types also can't be an empty
string, so just bringing a number of issues with types in compliance
with the openapi spec.
When a user signs up via an external auth method, a new link is added to the signup modal which allows them to connect an existing Discourse account. This will only happen if:
- There is at least 1 other auth method available
and
- The current auth method permits users to disconnect/reconnect their accounts themselves
This handles a few edge cases which are extremely rare (due to the UI layout), but still technically possible:
- Ensure users are authenticated before attempting association.
- Add a message and logic for when a user already has an association for a given auth provider.
This reverts a part of changes introduced by https://github.com/discourse/discourse/pull/13947
In that PR I:
1. Disallowed topic feature links for TL-0 users
2. Additionally, disallowed just putting any URL in topic titles for TL-0 users
Actually, we don't need the second part. It introduced unnecessary complexity for no good reason. In fact, it tries to do the job that anti-spam plugins (like Akismet plugin) should be doing.
This PR reverts this second change.
This disallows putting URLs in topic titles for TL0 users, which means that:
If a TL-0 user puts a link into the title, a topic featured link won't be generated (as if it was disabled in the site settings)
Server methods for creating and updating topics will be refusing featured links when they are called by TL-0 users
TL-0 users won't be able to put any link into the topic title. For example, the title "Hey, take a look at https://my-site.com" will be rejected.
Also, it improves a bit server behavior when creating or updating feature links on topics in the categories with disabled featured links. Before the server just silently ignored a featured link field that was passed to him, now it will be returning 422 response.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
* DEV: Return 400 instead of 500 for invalid top period
This change will prevent a fatal 500 error when passing in an invalid
period param value to the `/top` route.
* Check if the method exists first
I couldn't get `ListController.respond_to?` to work, but was still able
to check if the method exists with
`ListController.action_methods.include?`. This way we can avoid relying
on the `NoMethodError` exception which may be raised during the course
of executing the method.
* Just check if the period param value is valid
* Use the new TopTopic.validate_period method
* Copy remove_member to new `leave` method
* Remove unneeded code from the leave method
* Rearrange the leave method
* Remove unneeded code from the remove_member method
* Add tests
* Implement on the client side
* Copy the add_members method to the new join method
* Remove unneeded code from the join method
* Rearrange the join method
* Remove unneeded stuff from the add_members method
* Extract add_user_to_group method
* Implement of the client side
* Tests
* Doesn't inline users.uniq
* Return promise from join.then()
* Remove unnecessary begin and end
* Revert "Return promise from join.then()"
This reverts commit bda84d8d
* Remove variable already_in_group
Will show the last 6 seen users as filtering suggestions when typing @ in quick search. (Previously the user suggestion required a character after the @.)
This also adds a default limit of 6 to the user search query, previously the backend was returning 20 results but a maximum of 6 results was being shown anyway.
When configured, all topics in the category inherits the slow mode
duration from the category's default.
Note that currently there is no way to remove the slow mode from the
topics once it has been set.
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
Flips content_security_policy_frame_ancestors default to enabled, and
removes HTTP_REFERER checks on embed requests, as the new referer
privacy options made the check fragile.
* No need to return anything except a status code from the server
* Switch a badge state before sending a request and then switch it back in case of an error
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
This PR adds the first use of Uppy in our codebase, hidden behind a enable_experimental_image_uploader site setting. When the setting is enabled only the user card background uploader will use the new uppy-image-uploader component added in this PR.
I've introduced an UppyUpload mixin that has feature parity with the existing Upload mixin, and improves it slightly to deal with multiple/single file distinctions and validations better. For now, this just supports the XHRUpload plugin for uppy, which keeps our existing POST to /uploads.json.
If user had a staged account and logged in using a third party service
a different username was suggested. This change will try to use the
username given by the authentication provider first, then the current
staged username and last suggest a new one.
When a staged user tried to redeem an invite, a different username was
suggested and manually typing the staged username failed because the
username was not available.
User flair was given by user's primary group. This PR separates the
two, adds a new field to the user model for flair group ID and users
can select their flair from user preferences now.
Mixing multisite and standard specs can lead to issues (e.g. when using `fab!`)
Disabled the (upcoming https://github.com/discourse/rubocop-discourse/pull/11) rubocop rule for two files that have thoroughly tangled both types of specs.
* FEATURE: Redirect logged in user to invite topic
Users who were already logged in and were given an invite link to a
topic used to see an error message saying that they already have an
account and cannot redeem the invite. This commit amends that behavior
and redirects the user directly to the topic, if they can see it.
* FEATURE: Add logged in user to invite groups
Users who were already logged in and were given an invite link to a
group used to see an error message saying that they already have an
account and cannot redeem the invite. This commit amends that behavior
and adds the user to the group.
And also move all the "top topics by period" routes to query string param.
/top/monthly => /top?period=monthly
/c/:slug/:id/l/top/monthly => /c/:slug/:id/l/top?period=monthly
/tag/:slug/l/top/daily => /tag/:slug/l/top?period=daily (new)
Badges that are awarded multiple times can be favorite and not favorite
at the same time. This caused few problems when users tried to favorite
them as they were counted multiple times or their state was incorrectly
displayed.
Before this change, calling `StyleSheet::Manager.stylesheet_details`
for the first time resulted in multiple queries to the database. This is
because the code was modelled in a way where each `Theme` was loaded
from the database one at a time.
This PR restructures the code such that it allows us to load all the
theme records in a single query. It also allows us to eager load the
required associations upfront. In order to achieve this, I removed the
support of loading multiple themes per request. It was initially added
to support user selectable theme components but the feature was never
completed and abandoned because it wasn't a feature that we thought was
worth building.
The first thing we needed here was an enum rather than a boolean to determine how a directory_column was created. Now we have `automatic`, `user_field` and `plugin` directory columns.
This plugin API is assuming that the plugin has added a migration to a column to the `directory_items` table.
This was created to be initially used by discourse-solved. PR with API usage - https://github.com/discourse/discourse-solved/pull/137/
When dismissing new topics for the Tracked filter, the dismiss was
limited to 30 topics which is the default per page count for TopicQuery.
This happened even if you specified which topic IDs you were
selectively dismissing. This PR fixes that bug, and also moves
the per_page_count into a DEFAULT_PER_PAGE_COUNT for the TopicQuery
so it can be stubbed in tests.
Also moves the unused stub_const method into the spec helpers
for cases like this; it is much better to handle this in one place
with an ensure. In a follow up PR I will clean up other specs that
do the same thing and make them use stub_const.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
The `ember_jquery` bundle contains production builds of Ember and jQuery
which doesn't work with tests. This commits introduces a new
`theme_qunit_vendor` bundle which is copy of the `vendor` bundle but
doesn't contain `ember_jquery`.
This commit is a partial revert of
409c8585e4
Over the years we have found that a few communities never discovered tags.
Instead of having them default off we now have them default on, ensuring
that everyone finds out about them.
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
In Ember CLI addons get put into the vendor bundle, as opposed to their
own bundle like we're doing in the Rails app. We never use pretty-text
without our vendor bundle so this should have no difference on
performance.
We need to keep the pretty-text bundle for server side cooking.
It used to require SiteSetting.min_trust_level_to_allow_invite to
invite a user to a group, even if the user existed and the inviter was
a group owner.
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
Some specs failed when `LOAD_PLUGINS=1` was set while migrating the test DB and the narrative-bot plugin disabled the `send_welcome_message` site setting.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
We need to be careful when stubbing this method. SessionController#become won't be defined if production is set to true, so if these tests run first, calling #sign_in will fail for other tests.
Calling sign_in before stubbing guarantees the method is defined because the check happens when the class is loaded.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
When editing the first post for the topic we do two AJAX requests
to two separate controllers in this order:
PUT /t/topic-name
PUT /posts/2489523
This causes two post revisor calls, which end up triggering the
:post_edited DiscourseEvent twice. This is then picked up and sent
as a WebHook event twice. However we do not need to send a :post_edited
webhook event if the first post is being edited and topic_changed is
true from the :post_edited DiscourseEvent, because a second event will
shortly come through for just the post.
See https://meta.discourse.org/t/post-webhook-fires-two-times-on-post-edited-for-first-post-in-a-topic/162408
Continued on from https://github.com/discourse/discourse/pull/10590
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
* FIX: flaky specs after topic view custom filters
When ensuring TopicView class variables return to the original state it should use empty Hash instead of empty Array. That
https://github.com/discourse/discourse/blob/master/lib/topic_view.rb#L60
* FIX: convert to string for topic view custom filter
Some emails coming in via the mail receiver can still end up
with bad encoding when trying to enqueue the job. This catches
the last encoding issue and forces iso-8559-1 and encodes to
UTF-8 to circumvent the issue.
Currently, when the target is not available we're returning the error message "`You are not permitted to view the requested resource`" which is not clear.
We have found when receiving and posting inbound emails to the handle_mail route, it is better to POST the payload as a base64 encoded string to avoid strange encoding issues. This introduces a new param of `email_encoded` and maintains the legacy param of email, showing a deprecation warning. Eventually the old param of `email` will be dropped and the new one `email_encoded` will be the only way to handle_mail.
Uncategorized was sometimes visible even if allow_uncategorized_topics
was false. This was especially happening on mobile, if at least one
topic was uncategorized.
* FEATURE: Small improvements to the topic list embed
- Ability to wrap the list in a custom class so you can styles different
lists using specific CSS
- Adds a topic link to the thumbnail when using the complete template
* FIX: Be more strict about allowed chars in class name
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
If the "use_site_small_logo_as_system_avatar" setting is enabled, the site's small logo is displayed as the selected option by the avatar-selector. Choosing a different avatar disables the setting.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
Rails 6.1.3.1 deprecates a few API and has some internal changes that break our tests suite, so this commit fixes all the deprecations and errors and now Discourse should be fully compatible with Rails 6.1.3.1. We also have a new release of the rails_failover gem that's compatible with Rails 6.1.3.1.
The server used to respond with a generic 'error, contact admin' message
which did not offer any hint what the error was. This happened even when
the error could be easily corrected by the user (for example, if they
chose a very common password).
When invited by email, users will receive an invite URL which contains
a token. If that token is present when the invite is redeemed, their
account will be automatically activated.
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
This makes behavior consistent with documentation:
API:
> Will send an email with this message when present
Web UI:
> Optionally, provide more information about the suspension and it will be emailed to the user
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to how Discourse processes JavaScript that comes with themes/components, and these refactors may break your JS customizations; see https://meta.discourse.org/t/upcoming-core-changes-that-may-break-some-themes-components-april-12/186252?u=osama for details on how you can check if your themes/components are affected and what you need to do to fix them.
This commit also improves theme error handling in Discourse. We will now be able to catch errors that occur when theme initializers are run and prevent them from breaking the site and other themes/components.
We introduced a cap on the number of bookmarks the user can add in be145ccf2f. However this has caused unintended side effects; when the `jobs/scheduled/bookmark_reminder_notifications.rb` runs we get this error for users who already had more bookmarks than the limit:
> Job exception: Validation failed: Sorry, you have too many bookmarks, visit #{url}/my/activity/bookmarks to remove some.
This is because the `clear_reminder!` call was triggering a bookmark validation, which raised an error because the user already had to many, holding up other reminders.
This PR also adds `max_bookmarks_per_user` hidden site setting (default 2000). This replaces the BOOKMARK_LIMIT const so we can raise it for certain sites.
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to internal code that's responsible for processing themes/components in Discourse, most notably:
* `<script type="text/discourse-plugin">` tags are automatically converted to modules.
* The `theme-settings` service is removed in favor of a simple `lib` file responsible for managing theme settings. This was done to allow us to register/lookup theme settings very early in our Ember app lifecycle and because there was no reason for it to be an Ember service.
These refactors should 100% backward compatible and invisible to theme developers.
In Improve invite system, a newly created link only invite cannot
be retrieved via API with the invitee's email once created. A new
route, /invites/retrieve, is introduced to fetch an already
created invite by email address.
For 'local logins', the UX for staged users is designed to be identical to unregistered users. However, staged users logging in via external auth were being automatically unstaged, and skipping the registration/invite flow. In the past this made sense because the registration/invite flows didn't work perfectly with external auth. Now, both registration and invites work well with external auth, so it's best to leave the 'unstage' logic to those endpoints.
This problem was particularly noticeable when using the 'bulk invite' feature to invite users with pre-configured User Fields. In that situation, staged user accounts are used to preserve the user field data.
Admins can use bulk invites to pre-populate user fields. The imported
CSV file must have a header with "email" column (first position) and
names of the user fields (exact match).
Under the hood, the bulk invite will create staged users and populate
the user fields of those.
Find & Replace and Autotag watched words were not completely exported
and import did not work with these either. This commit changes the
input and output format to CSV, which allows for a secondary column.
This change is backwards compatible because a CSV file with only one
column has one value per line.
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
* FIX: Be able to handle long file extensions
Some applications have really long file extensions, but if we truncate
them weird behavior ensues.
This commit changes the file extension size from 10 characters to 255
characters instead.
See:
https://meta.discourse.org/t/182824
* Keep truncation at 10, but allow uppercase and dashes
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
The cluster name can be configured by setting the `DISCOURSE_CLUSTER_NAME` environment variable. If set, you can then call /srv/status with a `?cluster=` parameter. If the cluster does not match, an error will be returned. This is useful if you need a load balancer to be able to verify the identity, as well as the presence, of an application container.
When creating a PM target_usernames has been deprecated for some time
now but the api docs have yet to reflect this.
The api docs now specify to use target_recipients.
See: eef21625c6
The user and an admin could create multiple email change requests for
the same user. If any of the requests was validated and it became
primary, the other request could not be deleted anymore.
* FEATURE: allow category group moderators to pin/unpin topics
Category group moderators should be able to pin/unpin any topics within a category where they have appropraite category group moderator permissions.
Previously, we blocked search engines in tag pages since they may get marked as a duplicate content.
* DEV: block tag inner pages from search engines crawling.
Prior to this change, we had weights for very_high, high, low and
very_low. This means there were 4 weights to tweak and what weights to
use for `very_high/high` and `very_low/low` pair was hard to explain.
This change makes it such that `very_high` search priority will always
ensure that the posts are ranked at the top while `very_low` search
priority will ensure that the posts are ranked at the very bottom.
* FIX: Do not show expired invites under Pending tab
* DEV: Controller action was renamed in previous commit
* FEATURE: Add 'Expired' tab to invites
* FEATURE: Refresh model after removing expired invites
* FEATURE: Do not immediately add invite to the list
Opening the 'create-invite' modal used to automatically generate an
invite to reserve an invite link. If the user did not save it and
closed the modal, the invite would be destroyed. This operations caused
the invite list to change in the background and confuse users.
* FEATURE: Sort redeemed users by creation time
* UX: Improve show / hide advanced options link
* FIX: Show redeemed users even if invites were trashed
* UX: Change modal title when editing invite
* UX: Remove Get Link button
Users can get it from the edit modal
* FEATURE: Add limit for invite links generated by regular users
* FEATURE: Add option to skip email
* UX: Show better error messages
* FIX: Show "Invited by" even if invite was trashed
Follow up to 1fdfa13a099d8e46edd0c481b3aaaafe40455ced.
* FEATURE: Add button to save without sending email
Follow up to c86379a465f28a3cc64a4a8c939cf32cf2931659.
* DEV: Use a buffer to hold all changed data
* FEATURE: Close modal after save
* FEATURE: Rate limit resend invite email
* FEATURE: Make the save buttons smarter
* FEATURE: Do not always send email even for new invites
Mailing list mode can generate significant email volume, especially on sites with a large user base. Disable mailing list mode via site settings by default so sites don't experience an unexpectedly large cost from outgoing email.
The urls that we generate for mobile post notifications don't take into
account the subfolder url if a site happens to have one configured. When
this happens when you tap on a new mobile notification it takes you to
a url that doesn't work because it is missing the subfolder portion.
I honestly think this should be handled in the Post model like we do
with the Topic model. `Post.url` should know how to handle subfolder
installs, but that seemed like a very risky change because there are
lots of other places in the codebase where we tack on the base_path and
I didn't want to risk duplicating it.
I also found a small typo in the topics controller spec.
A missing email when accepting an invite link does not make sense so we
should make it a required param which helps to catch bugs in our test
suite and also prevent potential bugs in our code base when the code
trips on a `nil` email.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
The API now accepts an array called "ids" to select specific items. This parameter is not present on the UI.
Example usage: "yoursite.com/review.json?ids[]=1&ids[]=2"
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
Some users somehow manage to keep a topic open for a very long time that it causes the post read time to exceed the max integer value (2^31 - 1) which causes errors when we try to update the read time in the database to values above the integer limit.
This PR will cap posts read time at 2^31 - 1 to prevent these errors.
Adding a scope from a plugin was broken. This commit fixes it and adds a test.
It also documents the instance method and renames the serialized "id" attribute to "scope_id" to avoid a conflict when the scope also has a parameter with the same name.
The server responds with a redirect to URLs with wrong slugs, even when
the slug was the correct but in the encoded form (if it contained
special characters).
Original PR was reverted because of broken migration https://github.com/discourse/discourse/pull/12058
I fixed it by adding this line
```
AND topics.id IN(SELECT id FROM topics ORDER BY created_at DESC LIMIT :max_new_topics)
```
This time it is left joining a limited amount of topics. I tested it on few databases and it worked quite smooth
* DEV: Show warning message when using ember css selectors
When editing the theme css via the admin UI a warning message
will be displayed if it detects that the `#emberXXX` or `.ember-view`
css selectors are being used. These are dynamic selectors that ember
generates, but they can change so they should not be used.
* Update error message text to be more helpful
* Display a warning instead of erroring out
This allows the theme to still be saved, but a warning is displayed.
Updated the tests to check for the error message.
Updated the pre tags css so that it wraps for long messages.
Follow up https://github.com/discourse/discourse/pull/11968
Dismiss all new topics using the same DismissTopicService. In addition, MessageBus receives exact topic ids which should be marked as `seen`.
* FEATURE: Ability to dismiss new topics in a specific tag
Follow up of https://github.com/discourse/discourse/pull/11927
Using the same mechanism to disable new topics in a tag.
* FIX: respect when category and tag is selected
* DEV: Escape backslashes in curl example
We need to escape these backslashes otherwise they get filtered out when
generating the api docs.
* FIX: uniqItems should be uniqueItems
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
If a list of email addresses is pasted into a group’s Add Members form
that has one or more email addresses of users who already belong to the
group and all other email addresses are for users who do not yet exist
on the forum then no invites were being sent. This commit ensures that
we send invites to new users.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This moves all the rate limiting for user second factor (based on `params[:second_factor_token]` existing) to the one place, which rate limits by IP and also by username if a user is found.
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
Issue originally reported in https://meta.discourse.org/t/bypass-sso-by-adding-unkown-email-to-group/177339
Inviting people via email address to a group when SSO is enabled (or local logins are disabled) led to a situation where user records were being created bypassing single sign-on.
We already prevent that in most places. This adds required checks to `GroupsController`.
This pull requests contains a series of improvements to groups
settings and member management such as:
- Showing which users have set a group as primary
- Moving similar settings together under Effects
- Adding bulk select and actions to members page
* document user endpoints, allow for empty request/response bodies
* document more user endpoints, improve debugging output if no details are specified
* document some more user endpoints
* minor cleanup
* FIX: flakey tests due to bad regex
This cookie is only used during login. Having it persist after that can
cause some unusual behavior, especially for sites with short session
lengths.
We were already deleting the cookie following a new signup, but not for
existing users.
This commit moves the cookie deletion logic out of the erb template, and
adds logic and tests to ensure it is always deleted consistently.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
- Read in schemas from actual json files instead of a ruby hash. This is
helpful because we will be automatically generating .json schema files
from json responses and don't want to manually write ruby hash schema
files.
- Create a helper method for rspec schema validation tests to dry up code
* DEV: Add schema checking to api doc testing
This commit improves upon rswag which lacks schema checking. rswag
really only checks that the https status matches, but this change adds
in the json-schema_builder gem which also has schema validation.
Now we can define schemas for each of our requests/responses in the
`spec/requests/api/schemas` directory which will make our documentation
specs a lot cleaner.
If we update a serializer by either adding or removing an attribute the
tests will now fail (this is a good thing!). Also if you change the type
of an attribute say from an array to a string the tests will now fail.
This will help significantly with keeping the docs in sync with actual
code changes! Now if you change how an endpoint will respond you will
have to update the docs too in order for the tests to pass. :D
This PR is inspired by:
https://www.tealhq.com/post/how-teal-keeps-their-api-tests-and-documentation-in-sync
* Swap out json schema validator gem
Swapped out the outdated json-schema_builder gem with the json_schemer
gem.
* Add validation fields to schema
In order to have "strict" validation we need to add
`additionalProperties: false` to the schema, and we need to specify
which attributes are required.
Updated the debugging test output to print out the error details if
there are any.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
As per @davidtaylorhq 's comment at 6e2be3e#r46069906, this fixes an oversight where if login_required is enabled and an anon user follows a confirm new email link they are forced to login, which is not what the intent of #10830 was.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
This results in some fun disasters if allowed to happen. For now, just issue an oblique error message; a localized message will be added on the client.
Added GET user by external_id to the api docs.
Fixed `/users/{username}` docs to be `/u/{username}`
Extracted out common user response into a shared helper.
It used to change the category of the topic, instead of the destination
category (topic.category_id instead of topic.shared_draft.category_id).
The shared drafts controls were displayed only if the current category
matched the 'shared drafts category', which was not true for shared
drafts that had their categories changed (affected by the previous bug).
Googlebot handles no-index headers very elegantly. It advises to leave as many routes as possible open and uses headers for high fidelity rules regarding indexes.
Discourse adds special `x-robot-tags` noindex headers to users, badges, groups, search and tag routes.
Following up on b52143feff we now have it so Googlebot gets special handling.
Rest of the crawlers get a far more aggressive disallow list to protect against excessive crawling.
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
25563357 moved the logout redirect logic from the client-side to the server-side. Unfortunately the login_required check was lost during the refactoring which meant that non-login-required sites would redirect to `/login` after redirect, and immediately restart the login process. Depending on the SSO implementation, that can make it impossible for users to log out cleanly.
This commit restores the login_required check, and prevents the potential redirect loop.
We should always hide user_id in response when `hide_email_address_taken` setting is enabled. Currently, it can be used to determine if the email was used or not.
This ensures that users are only served cached content in their own language. This commit also refactors to make use of the `Discourse.cache` framework rather than direct redis access
* FEATURE: onebox for local categories
This commit adjusts the category onebox to look more like the category boxes do on the category page.
Co-authored-by: Jordan Vidrine <jordan@jordanvidrine.com>
- Display reason for validation error when logging in via an authenticator
- Fix email validation handling for 'Discourse SSO', and add a spec
Previously, validation errors (e.g. blocked or already-taken emails) would raise a generic error with no useful information.
At the moment, when filtering by group, the directory will unconditionally return the current user at the top of the list. This is quite unexpected, given that the user is deliberately trying to filter the list. This commit makes sure the 'include current user' logic only triggers for unfiltered directories
After the search term is parsed for advanced search filters, the term may
become empty. Later, the same term will be passed to Discourse.route_for
which will raise an ArgumentError.
> URI(nil)
ArgumentError: bad argument (expected URI object or URI string)
* FEATURE: display error if Oneboxing fails due to HTTP error
- display warning if onebox URL is unresolvable
- display warning if attributes are missing
* FEATURE: Use new Instagram oEmbed endpoint if access token is configured
Instagram requires an Access Token to access their oEmbed endpoint. The requirements (from https://developers.facebook.com/docs/instagram/oembed/) are as follows:
- a Facebook Developer account, which you can create at developers.facebook.com
- a registered Facebook app
- the oEmbed Product added to the app
- an Access Token
- The Facebook app must be in Live Mode
The generated Access Token, once added to SiteSetting.facebook_app_access_token, will be passed to onebox. Onebox can then use this token to access the oEmbed endpoint to generate a onebox for Instagram.
* DEV: update user agent string
* DEV: don’t do HEAD requests against news.yahoo.com
* DEV: Bump onebox version from 2.1.5 to 2.1.6
* DEV: Avoid re-reading templates
* DEV: Tweaks to onebox mustache templates
* DEV: simplified error message for missing onebox data
* Apply suggestions from code review
Co-authored-by: Gerhard Schlager <mail@gerhard-schlager.at>
Allowing the editing of remote themes has been something Discourse has advised against for some time. This commit removes the ability to edit or upload files to remote themes from Admin > Customize to enforce the recommended practice.
Previously, `/u/by-external/{id}` would only work for 'Discourse SSO' systems. This commit adds a new 'provider' parameter to the URL: `/u/by-external/{provider}/{id}`
This is compatible with all auth methods which have migrated to the 'ManagedAuthenticator' pattern. That includes all core providers, and also popular plugins such as discourse-oauth2-basic and discourse-openid-connect.
The new route is admin-only, since some authenticators use sensitive information like email addresses as the external id.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Users could be silenced or suspended by two staff members at the same time and
would not be aware of it. This commit shows an error message if another penalty
has been applied.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
This reverts commit e3de45359f.
We need to improve out strategy by adding a cache breaker with this change ... some assets on CDNs and clients may have incorrect CORS headers which can cause stuff to break.
Documenting a few more endpoints so that our api docs can be
automatically generated. Made a couple other minor changes, like
including the "OK" example for our default success response.
* FEATURE: allow category group moderators to edit posts
If the `enable_category_group_moderation` SiteSetting is enabled, posts should be editable by those belonging to the appropraite groups.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
When enable_personal_messages was disabled, moderators could not see
the private messages for the "moderators" group. The link was displayed
on the client side, but the checks on the server side did not allow it.
Previously, moving a category into another one, that already had a child category of that name (but with a non-conflicting slug) would cause a 500 error:
```
# PG::UniqueViolation:
# ERROR: duplicate key value violates unique constraint "unique_index_categories_on_name"
# DETAIL: Key (COALESCE(parent_category_id, '-1'::integer), name)=(5662, Amazing Category 0) already exists.
```
It now returns 422, and shows the same message as when you're renaming a category: "Category Name has already been taken".
Error messages for exceeded rate limits and invalid parameters always used the English locale instead of the default locale or the current user's locale.
The download link on the lightbox for images was not downloading the image if the upload was marked secure, because the code in the upload controller route was not respecting the dl=1 param for force download.
This PR fixes this so the download link works for secure images as well as regular ligthboxed images.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
This allows administrators to stop automatic redirect to an external authenticator. It only takes effect when there is a single authentication method, and the site is login_required
Since 9e4ed03, moderators can view groups with visibility level set to "Group owners, members and moderators".
This fixes an issue where moderators can see the group in /g but then get a 404 when clicking on individual groups.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
This reverts commit 7fc7090. And fixed the spec test fails.
There is a request spec that was ignored with the `xit` flag almost a
year ago and every time you generate the api docs with
```
rake rswag:specs:swaggerize
```
it shows the output of this pending test and I guess I finally got sick
of looking at it, so here is a fix for it.
Original Commit: d84c34ad75
When a category is removed from `auto_watch_category` we are removing
CategoryUser. However, there are still TopicUser with notification level
set to `watching` which was inherited from Category.
We should move them back to `regular` unless they were modified by a user.
These fields are required when using the UI and if `suspend_until`
params isn't used the user never is actually suspended so we should
require these fields when suspending a user.
This commit is addressing an issue where it is possible that there could
be multiple topic timer jobs running to close a topic or a weird race
condition state causing a topic that was just closed to be re-opened.
By removing the logic from the Topic Timer model into the Topic Timer
controller endpoint we isolate the code that is used for setting an
auto-open or an auto-close timer to just that functionality making the
topic timer background jobs safer if multiple are running.
Possibly in the future if we would like this logic back in the model a
refactor will be needed where we actually pass in the auto-close and
auto-open action instead of mixing it with the close and open
action that is currently being passed to the controller.
When someone wants to add > 1000 users at once they will hit a timeout.
Therefore, we should introduce limit and inform the user when limit is exceeded.
* FIX: Unlike own posts on ownership transfer
If a user has liked a post that has passed the
`post_undo_action_window_mins` system setting window and you transfer ownership
of that post to that user you will be the owner of a post that you have
liked, but cannot unlike resulting in a weird UI behavior. This commit
fixes this issue.
The existing tests didn't check for the timeout window for unliking
posts so I added that in.
I couldn't find a good way to do this logic inside of the guardian class
so rather than duplicating behavior of the `PostActionDestroyer` class
inside of the `PostOwnerChanger` I decided to pass in a "bypass"
variable that could be used to check if the calling class is the
'post_owner_changer' and bypass the guardian instead. I went this route
because the guardian `can_delete_post_action` method has no way of
distinguishing how to allow a user to be able to unlike their own posts
after the timeout window but only on a post owner change.
* use an options hash instead
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
The category model already has a default value for `color` and
`text_color` so they don't need to be required via the API. The ember UI
already requires that colors be selected.
The name of the category also doesn't need to be required when updating
the category either because we are already passing in the id for the
category we want to change.
These changes improve the api experience because you no longer have to
lookup the category name, color, or text color before updating a single
category attribute. When creating a category the name is still required.
https://meta.discourse.org/t/-/132424/2
The `/directory_items` route needs to have a .json url, but the rails
url helper `_path` doesn't return the format of the route.
I tried passing in a format options to `directory_items_path`. Which
works in the rails console
```
[8] pry(main)> directory_items_path(params.merge(:format => :json))
=> "/directory_items.json?page=1"
```
but when I added that some logic to the controller it comes out as
```
/directory_items?format=json&page=1
```
(which is actually how I expect it to work based on how you pass in the
format param). Anyways, because I couldn't figure out how to pass a
format to the `_path` helper I just used URI.parse to append `.json`
manually.
The UI prevents users from trying to create tags on topics when they
don't have permission, but if you are trying to add tags to a topic via
the API and you don't have permission before this change it would
silently succeed in creating the topic, but it wouldn't have any tags.
Now a 422 error will be returned with an error message when trying to
create a topic with tags when tagging is disabled or you don't have
enough trust level to add tags to a topic.
Bug report: https://meta.discourse.org/t/-/70525/14
When a tab is open but left unattended for a while, the red, green, and blue
pills tend to go out of sync.
So whevener we open the notifications menu, we sync up the notification count
(eg. blue and green pills) with the server.
However, the reviewable count (eg. the red pill) is not a notification and
is located in the hamburger menu. This commit adds a new route on the server
side to retrieve the reviewable count for the current user and a ping
(refreshReviewableCount) from the client side to sync the reviewable count
whenever they open the hamburger menu.
REFACTOR: I also refactored the hamburger-menu widget code to prevent repetitive uses
of "this.".
PERF: I improved the performance of the 'notify_reviewable' job by doing only 1 query
to the database to retrieve all the pending reviewables and then tallying based on the
various rights.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
This commit should cause no functional change
- Split into functions to avoid deep nesting
- Register custom field type, and remove manual json parse/serialize
- Recover from deleted upload records
Also adds a test to ensure pull_hotlinked_images redownloads secure images only once
Apparently latest.json and latest.rss are not routed to the same
controller methods. This change allows for any passed in query
parameters to actually be applied to the rss route.
This came in as a request on meta:
https://meta.discourse.org/t/-/155812/6
Currently, we only reset `email_digests`, `email_level` and `email_messages_level` when the user wants to unsubscribe from all email.
`mailing_list_mode` should be reset as well
There was a bug that even when `email_digest` was set to false but
`digest_after_minutes` was positive, we were not displaying correct
status.
In addition, the message is improved when the user is unsubscribed +
unsubscribe from all is hidden.
Before this commit if you were bulk removing group members and passed in
a user who wasn't currently a member of that group the whole request
would fail. This change will return a 200 response now listing the users
that were removed and those that were skipped.
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
Category and tag hashtags used to be handled differently even though
most of the code was very similar. This design was the root cause of
multiple issues related to hashtags.
This commit reduces the number of requests (just one and debounced
better), removes the use of CSS classes which marked resolved hashtags,
simplifies a lot of the code as there is a single source of truth and
previous race condition fixes are now useless.
It also includes a very minor security fix which let unauthorized users
to guess hidden tags.
* FIX: Improve category hashtag lookup
This commit improves support for sub-sub-categories and does not include
the ID of the category in the slug, which fixes the composer preview.
* FIX: Sub-sub-categories can be mentioned using only two levels
* FIX: Remove support for three-level hashtags
* DEV: Simplify code
The previous fix (f43c0a5d85) wasn't working for images that were already uploaded.
The "metadata" (eg. 'for_*' and 'secure' attributes) were not added to existing uploads.
Also used 'Upload.get_from_url' is the admin/site_setting controller to properly retrieve
an upload from its URL.
Fixed the Upload::URL_REGEX to use the \h (hexadecimal) for the SHA
Follow-up-to: f43c0a5d85
When uploading an image as a site setting, we need to return the "raw" URL, otherwise
when saving the site setting, the upload won't be looked up properly.
Follow-up-to: f11363d446
* FEATURE: Don't display muted/ignored users under "who liked"
Previously, if you clicked on the heart icon below a post
it would show you the avatar for a user even if you ignored or muted
them.
This commit will instead display a (?) icon. The count of likes will
remain correct, but you needn't be reminded of the person you
preferred not to see.
* Use a circle instead of (?) for unknown user
Adds new hidden site settings for rate limits:
30 for logged in users, 15 for anon
Adds an anon cache for searching, caches results of searches for 1 minute
Discourse needs a bunch of data preloaded before it can start up.
Normally we throw blobs of this into the HTML document that is requested
but in some cases that's awkward to retrieve.
For example with Ember CLI you have a separate javascript application
that needs to make its own HTML.
This API endpoint returns a JSON object with all the data Discourse needs to
bootstrap and start up.
In some restricted setups all JS payloads need tight control.
This setting bans admins from making changes to JS on the site and
requires all themes be whitelisted to be used.
There are edge cases we still need to work through in this mode
hence this is still not supported in production and experimental.
Use an example like this to enable:
`DISCOURSE_WHITELISTED_THEME_REPOS="https://repo.com/repo.git,https://repo.com/repo2.git"`
By default this feature is not enabled and no changes are made.
One exception is that default theme id was missing a security check
this was added for correctness.
Fixes a regression in
e8fb9d4066
which caused a bug where you couldn't send a message to a group that
contained an Uppercase letter. Added a test case for this.
Bug report: https://meta.discourse.org/t/-/152999
* FIX: add X-Robots-Tag header for check_xhr-covered GET actions, too
see https://meta.discourse.org/t/missing-x-robots-tag/152593/3 for context
* test: a spec making sure X-Robots-Tag header is present when needed
/groups path responds to anonymous requests and doesn't skip `check_xhr` method, so we can use it here.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* FIX: randomize file name when created from fixtures
When a temporary file is created from fixtures it should have a unique name.
It is to prevent a collision in parallel specs evaluation
* FIX: use /tmp/pid folder to keep fixture files
Signed S3 URLs are valid for 15 seconds, so we can safely allow the browser to cache them for 10 seconds. This should help with large numbers of requests when composing a post with many images.
* DEV: Add framework for filtered plugin registers
Plugins often need to add values to a list, and we need to filter those lists at runtime to ignore values from disabled plugins. This commit provides a re-usable way to do that, which should make it easier to add new registers in future, and also reduce repeated code.
Follow-up commits will migrate existing registers to use this new system
* DEV: Migrate user and group custom field APIs to plugin registry
This gives us a consistent system for checking plugin enabled state, so we are repeating less logic. API changes are backwards compatible
* DEV: Standardize table sorting verbiage
This commit creates a common component that tables can use to make their
headers sortable. This commit also standardizes on using `desc` as the
default and passing in the `asc=true` flag to adjust the sorting
direction.
* Add deprecation warnings
Adds deprecation warnings if using previous params and maintains
backwards compatibility. Set the default sort value for group members to
be asc.
* switch group requests to use common table-header-toggle
* update fixture
This commit prevents a 500 error from occurring if someone is trying to
setup their discourse instance as a sso provider and they don't pass in
a `return_sso_url` in their payload.
* FEATURE: Support for App Shortcuts Menu
This adds a list of shortcuts to a installed Discourse instance.
It can be accessed by right clicks or long press on the app icon.
See https://github.com/MicrosoftEdge/MSEdgeExplainers/blob/master/Shortcuts/explainer.md
List of possible follow ups include:
- Making it admin customizable
- Making it user customizable
- Using SVG icons from the site icon sprite
- Picking an accent color for icons
* FIX: Add type to shortcut menu icons
This refactors default_current_user_provider in a few ways:
- Introduce a generic `api_parameter_allowed?` method which checks for whitelisted routes/formats
- Only read the api_key parameter on allowed routes. It is now completely ignored on other routes (previously it would raise a 403)
- Start reading user_api_key parameter on allowed routes
- Refactor tests as end-end integration tests
A plugin API for PARAMETER_API_PATTERNS will be added soon
Previously we only changed sequence on ownership change, this
cause a race condition between tabs where user could type for a
long time without being warned of an out of date draft.
This change is a radical change and we should watch closely.
Code was already in place to track sequence on the client so no
changes are needed there.
For pages that do not specify canonical URL we will default to `https://SITENAME/PATH`.
This ensures that if a URL is crawled on the CDN the search ranking will transfer to the main site.
Additionally we whitelist the `?page` param
* DEV: api documentation updates
- Created a script to convert json responses to rswag
- Documented several api endpoints
- Switched rswag to use header based auth
* Update script, fix some schema missmatches
Google insists on indexing pages so it can figure out if they
can be removed from the index.
see: https://support.google.com/webmasters/answer/6332384?hl=en
This change ensures the we have special behavior for Googlebot
where we allow indexing, but block the actual indexing via
X-Robots-Tag
Expand SiteSetting.allow_index_in_robots_txt so it also adds a
noindex header if set to false.
This makes sure that nothing is indexed even if it somehow reaches
Google.
1. Total 6 attempts per day per user
2. Total of 5 per unique email/login that is not found per hour
3. If an admin blocks an IP that IP can not request a reset
If for some reason an update did not go through (for example,
concurrently updating the same topic twice), we were logging something
like:
```
create_errors_json called with unrecognized type: #<Topic
```
This happened because we knew an error occurred but the active record
object had no errors attached.
This patch fixes the issue by attaching a proper error message in the
event that this happens.
The main thrust of this PR is to take all the conditional checks based on the `enable_bookmarks_with_reminders` away and only keep the code from the `true` path, making bookmarks with reminders the core bookmarks feature. There is also a migration to create `Bookmark` records out of `PostAction` bookmarks for a site.
### Summary
* Remove logic based on whether enable_bookmarks_with_reminders is true. This site setting is now obsolete, the old bookmark functionality is being removed. Retain the setting and set the value to `true` in a migration.
* Use the code from the rake task to create a database migration that creates bookmarks from post actions.
* Change the bookmark report to read from the new table.
* Get rid of old endpoints for bookmarks
* Link to the new bookmarks list from the user summary page
* DEV: Use `render_json_error` (Adds specs for Admin::GroupsController)
* DEV: Use a specific error on blank category slug (Fixes a `render_json_error` warning)
* DEV: Use a specific error on reviewable claim conflict (Fixes a `render_json_error` warning)
* DEV: Use specific errors in Admin::UsersController (Fixes `render_json_error` warnings)
* FIX: PublishedPages error responses
* FIX: TopicsController error responses (There was an issue of two separate `Topic` instances for the same record. This makes sure there's only one up-to-date instance.)
- Eliminate superfluous "author wrote" block
- Eliminate block-quote for all posts
- Move participant count and reply count to 1 line
- Prioritize name over username if forum requests
- Use fabrication in list controller spec to speed up spec
There is now an explicit "Delete Bookmark" button in the edit modal. A confirmation is shown before deleting.
Along with this, when the bookmarked post icon is clicked the modal is now shown instead of just deleting the bookmark. Also, the "Delete Bookmark" button from the user bookmark list now confirms the action.
Add a `d d` shortcut in the modal to delete the bookmark.
Sometimes spec which is testing order groups by user count is failing.
My theory is that cause is the randomness of Postgres when the order value is the same for 2 rows.
In spec, we got three groups
`moderator_group` - 0 users
`group` - 1 user
`other_group` - 1 user
And we are expecting that controller will return them in ascending order [moderator, group, other_group]
Because `group` and `other_group` contain the same amount of users, we are dealing with luck
Therefore, I believe that adding one more user to other_group should make that query reliable.
It was not crashing on my local machine, so I am not 100% sure.
This commit is for a frequently requested task on meta so that only 1
API call is needed instead of 3!
In order to create a user via the api and not have them receive an
activation email you can pass in the `active=true` flag. This prevents
sending an email, but it is only half of the solution and puts the db in
a weird state where it has an active user with an unconfirmed email.
This commit fixes that and ensures that if the `active=true` flag is set
the user's email is also marked as confirmed.
This change only applies to admins using the API.
Related topics on meta:
- https://meta.discourse.org/t/-/68663
- https://meta.discourse.org/t/-/33133
- https://meta.discourse.org/t/-/36133
Timezone is guessed by moment.js if unset upon a normal login, but was not when
logging in via an email link. This adds logic to update a guessed
timezone upon email login so timezones don't end up blank.
FEATURE: add after-reviewable-post-user plugin outlet
Add a plugin outlet after reviewable post user
Add a basic user serializer that includes custom fields.
Allows review queue serializer to include custom fields for its users
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
Previously we were only updating group membership when a user record was
first created in an SSO setting.
This corrects it so we also update it if SSO changes the email
* DEPRECATION: Remove support for api creds in query params
This commit removes support for api credentials in query params except
for a few whitelisted routes like rss/json feeds and the handle_mail
route.
Several tests were written to valid these changes, but the bulk of the
spec changes are just switching them over to use header based auth so
that they will pass without changing what they were actually testing.
Original commit that notified admins this change was coming was created
over 3 months ago: 2db2003187
* fix tests
* Also allow iCalendar feeds
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
This is so users with huge amount of bookmarks do not have to wait a long time to see results.
* Add a bookmark list and list serializer to server-side to be able to handle paging and load more URL
* Use load-more component to load more bookmark items, 20 at a time in user activity
* Change the way current user is loaded for bookmark ember models because it was breaking/losing resolvedTimezone when loading more items
* FEATURE: add setting `auto_approve_email_domains` to auto approve users
This commit adds a new site setting `auto_approve_email_domains` to
auto approve users based on their email address domain.
Note that if a domain already exists in `email_domains_whitelist` then
`auto_approve_email_domains` needs to be duplicated there as well,
since users won’t be able to register with email address that is
not allowed in `email_domains_whitelist`.
* Update config/locales/server.en.yml
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
If the “secure media” site setting is enabled then ALL files uploaded to Discourse (images, video, audio, pdf, txt, zip etc. etc.) will follow the secure media rules. The “prevent anons from downloading files” setting will no longer have any bearing on upload security. Basically, the feature will more appropriately be called “secure uploads” instead of “secure media”.
This is being done because there are communities out there that would like all attachments and media to be secure based on category rules but still allow anonymous users to download attachments in public places, which is not possible in the current arrangement.
Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
* Setting the cookie for the correct path, and not having it on root
* Correctly removing the cookie on first login
This fix ensures that when a topic title is edited the new title shows
up in the post webhook instead of the old title.
Rather than passing in the old topic object to the PostRevisor the
PostRevisor initializer will load the updated topic object inside of the
initializer if you don't pass it in. This will allow the post_edited
webhook to have the correct topic values.
Original bug reported at:
https://meta.discourse.org/t/post-edited-webhook-does-not-reflect-updated-topic-title/144722
Attempt 2, with more test.
Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
Setting the cookie for the correct path, and not having it on root
Correctly removing the cookie on first login
Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
* Setting the cookie for the correct path, and not having it on root
* Correctly removing the cookie on first login
Meta report: https://meta.discourse.org/t/short-url-secure-uploads-s3/144224
* if the show_short route is hit for an upload that is
secure, we redirect to the secure presigned URL. however
this was not taking into account multisite so the db name
was left off the path which broke the presigned URL
* we now use the correct url_for method if we know the
upload (like in the show_short case) which takes into
account multisite
On some sites when bootstrapping communities it is helpful to bootstrap
with a "light weight" invite code.
Use the site setting `invite_code` to set a global invite code.
In this case the administrator can share the code with
a community which is very easy to remember and then anyone who has
that code can easily register accounts.
People without the invite code are not allowed account registration.
Global invite codes are less secure than indevidual codes, in that they
tend to leak in the community however in some cases when starting a brand
new community the security guarantees of invites are not needed.
A custom date and time can now be selected for a bookmark reminder
The reminder will not happen at the exact time but rather at the next 5 minute interval of the bookmark reminder schedule.
This PR also fixes issues with bulk deleting topic bookmarks.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
This commit ensures that an error is thrown when a user fails to be
removed from a group instead of silently failing.
This means when using the api you will receive a 400 instead of a 200 if
there is a failure. The remove group endpoint allows the removal of
multiple users, this change means that if you try to delete 10 users,
but 1 of them fails you will receive a 400 instead of 200 even though
the other 9 were removed successfully. Rather than adding a bunch more
complexity I think this is more than adequate for most use cases.
Introduces `/user-cards.json`
Also allows the client-side user model to be passed an existing promise when loading, so that multiple models can share the same AJAX request
Meta: https://meta.discourse.org/t/improve-error-message-when-not-including-name-setting-up-totp/143339
* when the user creates a TOTP second factor method we want
to show them a nicer error if they forget to add a name
or the code from the app, instead of the param missing error
* also add a client-side check for this and for security key name,
no need to bother the server if we can help it
Anonymous users could query the invite json and see counts and
summaries which is not allowed in the UX of Discourse.
This commit has those endpoints return a 403 unless the user is
allowed to invite.
When secure media is enabled and an attachment is marked as secure we want to use the full url instead of the short-url so we get the same access control post protections as secure media uploads.
When admin changes a user's email from the preferences page of that user:
* The user will not be sent an email to confirm that their
email is changing. They will be sent a reset password email
so they can set the password for their account at the new
email address.
* The user will still be sent an email to their old email to inform
them that it was changed.
* Admin and staff users still need to follow the same old + new
confirm process, as do users changing their own email.
Now if a group is visible but unmentionable, users can search for it
when composing by typing with `@`, but it will be rendered without the
grey background color.
It will also no longer pop up a JIT warning saying "You are about to
mention X people" because the group will not be mentioned.
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
When a tag is restricted to a secured category that the user can't see,
the message was saying that it wasn't restricted to any categories.
Now it will say it's restricted to categories you can't access.
This commit adds support for an optional "logout" parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a "logout=true" parameter to the encoded/signed "sso" payload,
then Discourse will treat the request as a logout request instead
of an authentication request. The logout flow works something like
this:
* User requests logout at SSO-Consumer site (e.g., clicks "Log me out!"
on web browser).
* SSO-Consumer site does whatever it does to destroy User's session on
the SSO-Consumer site.
* SSO-Consumer then redirects browser to the Discourse sso_provider
endpoint, with a signed request bearing "logout=true" in addition
to the usual nonce and the "return_sso_url".
* Discourse destroys User's discourse session and redirects browser back
to the "return_sso_url".
* SSO-Consumer site does whatever it does --- notably, it cannot request
SSO credentials from Discourse without the User being prompted to login
again.
When 'categories topics' setting is set to 0, the system will
automatically try to find a value to keep the two columns (categories
and topics) symmetrical.
The value is computed as 1.5x the number of top level categories and at
least 5 topics will always be returned.
Adds a new route `/u/{username}/card.json`, which has a reduced number of fields. This change is behind a hidden site setting, so we can test compatibility before rolling out.
On some customer forums we are randomly getting a "You must select a valid user" error when sending a PM even when all parameters seem to be OK. This is an attempt to track it down with more data.
Previously if local login via email was disabled because of the site setting or because SSO was enabled, we were raising a 500 error. We now raise a 403 error instead; we shouldn't raise 500 errors on purpose, instead keeping that code for unhandled errors. It doesn't make sense in the context of what we are validating either to raise a 500.
* When we refactored away the admin-login route we introduced a bug where admins could not log into an SSO enabled site, because of a check in the email_login route that disallowed this.
* Allow admin to get around this check.