We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
Follow up to 88a8584348. Sets
the baked version of all posts with custom emoji and a secure
media URL in the cooked content to 0. Then our periodic rebake
posts job will rebake them to apply the fix in the linked
commit. This only matters on sites with secure media enabled.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
Non-staff users are not allowed to see whisper so this change prevents
non-staff user from seeing a like count that does not make sense to
them. In the future, we might consider adding another like count column
for staff user.
Follow-up to 4492718864
It is too close to release of 2.8 for incomplete
feature shenanigans. Ignores and drops the columns and drops
the trigger/function introduced in
e21c640a3c.
Will pick this feature back up post-release.
We are planning on attaching bookmarks to more and
more other models, so it makes sense to make a polymorphic
relationship to handle this. This commit adds the new
columns and backfills them in the bookmark table, and
makes sure that any new bookmark changes fill in the columns
via DB triggers.
This way we can gradually change the frontend and backend
to use these new columns, and eventually delete the
old post_id and for_topic columns in `bookmarks`.
The `fancy_title` column in the `topics` table currently has a constraint that limits the column to 400 characters. We need to remove that constraint because it causes some automatic topics/PMs from the system to fail when using Discourse in locales that need more than 400 characters to the translate the content of those automatic messages.
Internal ticket: t58030.
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
We were checking for the existence of the column in any schema, including the `backup` schema. This can cause 'column does not exist' errors. In fact, we should only be checking in the `public` schema.
This column was dropped in a previous commit, in post migrations.
Unfortunatly that causes smoke tests to fail as there is a period between
migration and post migrations where records can not be inserted into the
table.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Old OnceOff job could perform pretty slowly on sites with millions of emails
New implementation operates in batches in a migration, minimizing locking.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When this setting is turned on, it will check that normalized emails
are unique. Normalized emails are emails without any dots or plus
aliases.
This setting can be used to block use of aliases of the same email
address.
In b8c8909a9d, we introduced a regression
where users may have had their `UserStat.first_unread_pm_at` set
incorrectly. This commit introduces a migration to reset `UserStat.first_unread_pm_at` back to
`User#created_at`.
Follow-up to b8c8909a9d.
Instead of using image-uploader, which relies on the old
UploadMixin, we can now use the uppy-image-uploader which
uses the new UppyUploadMixin which is stable enough and
supports both regular XHR uploads and direct S3 uploads,
controlled by a site setting (default to XHR).
At some point it may make sense to rename uppy-image-uploader
back to image-uploader, once we have gone through plugins
etc. and given a bit of deprecation time period.
This commit also fixes `for_private_message`, `for_site_setting`,
and `pasted` flags not being sent via uppy uploads onto the
UploadCreator, both via regular XHR uploads and also through
external/multipart uploads.
The uploaders changed are:
* site setting images
* badge images
* category logo
* category background
* group flair
* profile background
* profile card background
It allows saving local date to calendar.
Modal is giving option to pick between ics and google. User choice can be remembered as a default for the next actions.
* DEV: Remove HTML setting type and sanitization logic.
We concluded that we don't want settings to contain HTML, so I'm removing the setting type and sanitization logic. Additionally, we no longer allow the global-notice text to contain HTML.
I searched for usages of this setting type in the `all-the-plugins` repo and found none, so I haven't added a migration for existing settings.
* Mark Global notices containing links as HTML Safe.
* PERF: Improve database query perf when loading topics for a category.
Instead of left joining the `topics` table against `categories` by filtering with `categories.id`,
we can improve the query plan by filtering against `topics.category_id`
first before joining which helps to reduce the number of rows in the
topics table that has to be joined against the other tables and also
make better use of our existing index.
The following is a before and after of the query plan for a category
with many subcategories.
Before:
```
QUERY PLAN
-------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Limit (cost=1.28..747.09 rows=30 width=12) (actual time=85.502..2453.727 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..566518.36 rows=22788 width=12) (actual time=85.501..2453.722 rows=30 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=1.00..566001.58 rows=22866 width=20) (actual time=85.494..2453.702 rows=30 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((t
opics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Nested Loop (cost=0.57..528561.75 rows=68606 width=24) (actual time=85.472..2453.562 rows=31 loops=1)
Join Filter: ((topics.category_id = categories.id) AND ((categories.topic_id <> topics.id) OR (categories.id = 1
1)))
Rows Removed by Join Filter: 13938306
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..100480.05 rows=715549 width=24) (actual ti
me=0.010..633.015 rows=464623 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text))
Rows Removed by Filter: 105321
-> Materialize (cost=0.14..36.04 rows=30 width=8) (actual time=0.000..0.002 rows=30 loops=464623)
-> Index Scan using categories_pkey on categories (cost=0.14..35.89 rows=30 width=8) (actual time=0.006.
.0.040 rows=30 loops=1)
Index Cond: (id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,1
13,104,98,100,96,108,109,110,111}'::integer[]))
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..0.53 rows=1 width=16) (a
ctual time=0.004..0.004 rows=0 loops=31)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=30)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width
=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
Planning Time: 1.359 ms
Execution Time: 2453.765 ms
(23 rows)
```
After:
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Limit (cost=1.28..438.55 rows=30 width=12) (actual time=38.297..657.215 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..195944.68 rows=13443 width=12) (actual time=38.296..657.211 rows=30 loops=1)
Filter: ((categories.topic_id <> topics.id) OR (topics.category_id = 11))
Rows Removed by Filter: 29
-> Nested Loop Left Join (cost=1.13..193462.59 rows=13443 width=16) (actual time=38.289..657.092 rows=59 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=0.85..193156.79 rows=13489 width=20) (actual time=38.282..657.059 rows=59 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((topics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..134521.06 rows=40470 width=24) (actual time=38.267..656.850 rows=60 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text) AND (category_id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,113,104,98,100,96,108,109,110,111}'::integer[])))
Rows Removed by Filter: 569895
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..1.43 rows=1 width=16) (actual time=0.003..0.003 rows=0 loops=60)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=59)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
-> Index Scan using categories_pkey on categories (cost=0.14..0.17 rows=1 width=8) (actual time=0.001..0.001 rows=1 loops=59)
Index Cond: (id = topics.category_id)
Planning Time: 1.633 ms
Execution Time: 657.255 ms
(22 rows)
```
* PERF: Optimize index on topics bumped_at.
Replace `index_topics_on_bumped_at` index with a partial index on `Topic#bumped_at` filtered by archetype since there is already another index that covers private topics.
We don't actually use the reminder_type for bookmarks anywhere;
we are just storing it. It has no bearing on the UI. It used
to be relevant with the at_desktop bookmark reminders (see
fa572d3a7a)
This commit marks the column as readonly, ignores it, and removes
the index, and it will be dropped in a later PR. Some plugins
are relying on reminder_type partially so some stubs have been
left in place to avoid errors.
This new column will be used to indicate that a bookmark
is at the topic level. The first post of a topic can be
bookmarked twice after this change -- with for_topic set
to true and with for_topic set to false.
A later PR will use this column for logic to bookmark the
topic, and then topic-level bookmark links will take you
to the last unread post in the topic.
See also 22208836c5
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
This is necessary to allow for large file uploads via
the direct S3 upload mechanism, as we convert the external
file to an Upload record via ExternalUploadManager once
it is complete.
This will allow for files larger than 2,147,483,647 bytes (2.14GB)
to be referenced in the uploads table.
This is a table locking migration, but since it is not as highly
trafficked as posts, topics, or users, the disruption should be minimal.
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
