When installing private themes and theme components, the public key does
not show until the administrator types a valid Git repo URL. The regular
expression that checked the URL was too strict and it required the URL
to end with ".git".
This adds a new framework for accessible dialogs that will eventually replace bootbox. Under the hood, it uses the a11y-dialog package and an in-repo Ember addon. See PR for usage details.
1. Replace `{{did-insert` with the builtin `{{on` modifier
2. Move the i18n call into the template
With both of those changes, there is no logic left in the backing class, so we can switch to `templateOnly()` which is significantly faster. (granted, not a big deal for a component like this, but it makes for a good demonstration)
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Currently we can’t add a case-sensitive watched word if another one
exists with a different case. For example, the existing watched word
`Meta` has been created and is case-sensitive. Now an admin tries to add
`metA` while marking it as case-sensitive too, this won’t work and the
word won’t be added.
This patch changes this behavior by allowing to add same words that have
different cases, so the example above will now work as expected.
We still check for uniqueness but case-sensitivy is now taken
into account. It means that if the watched word `meta` already exists
and is not case-sensitive then it will not be possible to add `Meta`
(case-sensitive or not) as `meta` already matches every possible
variations of this word.
Follow up to 4d3c1ceb44, this commit
shows the SMTP response in the admin email sent list and also moves the
topic/post link into a new column. Reply key is now in its own column.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
Sometimes the user list was incomplete when multiple requests were
created to fetch next pages. If the responses did not arrive in the
same order as the requests then only the last response was parsed.
This is a follow up commit to a0f4c7fe88.
Also, the change in insert-hyperlink (from `this.linkUrl.indexOf("http") === -1` to `!this.linkUrl.startsWith("http")`) was intentional fix: we don't want to prevent users from looking up topics with http in their titles.
This switches us to use the modern ember resolver package, and re-implements a number of our custom resolution rules within it. The legacy resolver remains for now, and is used as a fallback if the modern resolver is unable to resolve a package. When this happens, a warning will be printed to the console.
Co-authored-by: Peter Wagenet <peter.wagenet@gmail.com>
7caaee2 introduced a duplicate definition of the component JS. This likely happened because we had the template defined under `javascripts/discourse`, and the component JS defined under `javascript/admin`. This commit removes the duplicate definition, and moves the template to the admin addon
```sh
npx ember-holy-futuristic-template-namespacing-batman-codemod ensure-template-only-has-backing-class
```
We would like to colocate templates but, when no backing class exists, colocated templates extend `templateOnly` instead of `Ember.Component`. Generating the backing class helps avoid any behavioral changes.
We can also run the `tagless-ember-components-codemod` to put the tags into the templates at which point we could convert these back to template-only components.
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
* FIX: Make watched words uploads work as intended
Currently when we upload a file containing watched words, it will always
add the words to the action that was initially selected: this is the
`block` action by default but if changing manually the action in the URL
to `flag` for example, then this action will be selected and uploaded
watched words will be categorised as `flag` no matter what.
The problem lies with how the component works: it’s an Uppy object where
extra data is defined to provide an action key to the server but when
navigating to another listed action, while this action key is properly
updated on the component itself, the underlying Uppy object has already
been created and doesn’t care about the new value.
This patch solves this by using the `_perFileData` method instead of
`data`: the former is merged just before uploading a file whereas the
latter is used when the Uppy object is created.
Twitter does not allow SVGs to be used for twitter:image
metadata (see https://developer.twitter.com/en/docs/twitter-for-websites/cards/overview/markup)
so we should fall back to the site logo if the image option
provided to `crawlable_meta_data` or SiteSetting.site_twitter_summary_large_image_url
is an SVG, and do not add the meta tag for twitter:image at all
if the site logo is an SVG.
Before this change, we were using the labels from the original chartData to the chart builder, and we would then apply our collapse function on each dataset which could change the labels and cause a mismatch.
This was very visible when using quarterly periods on consolidated pageviews.
This was causing unexpected behaviors on production builds. And also on firefox on local environnement, however the issues was slightly different.
- production chrome: colors don't load
- dev firefox: colors don't change when selecting a different color set
String.prototype.substr() is deprecated so we replace it with String.prototype.slice() which works similarily but isn't deprecated.
Signed-off-by: Tobias Speicher <rootcommander@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
We need this in other places, this commit moves clipboardCopy
to the utilities.js lib. Had to remove use of Promise as well because
lib/utilities cannot import it, otherwise it will cause a mini racer error.
This reverts commit f4c6a61855 and a8325c9016
This update of ember-auto-import and webpack causes significantly higher memory use during rebuilds. This made ember-cli totally unusable on 1GB RAM / 2GB swap environments. We don't have a specific need for this upgrade right now, so reverting for now.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks
Adds up and down buttons next to the inputs of value lists when there is more than 1 item present. This helps to re-order the items in the value lists if necessary.
This commit adds a hover effect for drag and drop in
the admin emoji uploader. It also changes the "Add New
Emoji" button to open the file selector; previously it
was useless because it was disabled unless a name was
entered (which is not even a requirement for the emoji)
and also it didn't actually do anything on click even
if it wasn't disabled.
Now we have a way of adding files without having to drag
and drop them, which is nice.
Also in this PR, there was no indication before that the upload was
complete apart from the button becoming enabled again.
This commit adds the highlight class to the emoji list
and removes it once the highlight fade animation is done,
like we do for new posts.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
This commit should be a no-op for all existing core outlets. Outlets which are introduced by themes/plugins may see a change in behavior, and should follow the steps below if they want to maintain their previous behavior.
`tagName="" connectorTagName=""` is almost always the correct choice for plugin outlets. 40eba8cd introduced a `noTags=true` shortcut which achieved this, and left a comment saying it should be the future default. This commit does exactly that. To avoid any breaking changes for plugins, all existing plugin outlets have been reviewed and adjusted by following this logic:
1) If `noTags=true`, remove the `noTags` parameter, and do not complete any further steps
2) If `tagName` is not specified, set `tagName="span"` (the previous default)
3) If `connectorTagName` is not specified, set `selectorTagName="div"` (the previous default)
4) If `tagName=""`, remove it
5) If `connectorTagName=""`, remove it
The updates were accomplished with the help of a ruby script:
```ruby
def removeAttr(tag, attribute)
tag = tag.sub /\s#{attribute}="?\w*"? /, " "
tag = tag.sub /\s#{attribute}="?\w*"?}}/, "}}"
tag = tag.sub /^\s*#{attribute}="?\w*"?\n/, ""
tag
end
files = Dir.glob("app/assets/javascripts/**/*.hbs")
puts "Checking #{files.count} files..."
files.each do |f|
content = File.read(f)
count = 0
edits = 0
content.gsub!(/{{\s*plugin-outlet.*?}}/m) do |match|
count += 1
result = match
noTags = result.include?("noTags=true")
tagName = result[/tagName="(\w*)"/, 1]
connectorTagName = result[/connectorTagName="(\w*)"/, 1]
if noTags
result = removeAttr(result, "noTags")
else
if connectorTagName == ""
result = removeAttr(result, "connectorTagName")
elsif connectorTagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} connectorTagName=\"div\"" }
end
if tagName == ""
result = removeAttr(result, "tagName")
elsif tagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} tagName=\"span\"" }
end
end
edits += 1 if match != result
result
end
puts "#{count} outlets, #{edits} edited -> #{f}"
File.write(f, content)
end
```
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
In the composer, we already only allow for S3 multipart uploads
if enable_direct_s3_uploads is true, so in the backups uploader
that is based on Uppy we want to do the same thing. In future
if self-hosters need some way to not use S3 multipart in these
scenarios for whatever reason we can revisit this then (which
should be as simple as adding a enable_multipart_s3_uploads site
setting).
Some reports, like the Web Crawler User Agents report, have very long strings that need to be truncated when displayed. However, there is no way to see the full value without exporting the report or inspecting the elements using dev tools. This PR set a `title` attribute with the full value to the reports `<td>` elements so that the full value is shown on hover.
This takes the uppy chunking algorithm and combines it with some
form submission from resumable.js for parity with the current
backup controller to make local backup uploads work with uppy.
We can then use this to replace the resumable-upload component
and the resumable.js library from our codebase, once stable.
This is disabled by default, so people using local backups will not
be affected. The enable_experimental_backup_uploader site setting
must be enabled for this to work.
- Removes jquery
- Removes a not unregistered listener and uses component event
- Removes external-url class as it was only valid in one case of the dropdown
- Uses @action
- Tagless
- Other minor changes
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
This commit, while changing the watched word uploader to use
uppy, also fixes a minor bug with the UppyUploadMixin where
the file input's value was not cleared after reset, which
prevented subsequent file uploads. The composer mixin already
has this fix.
Instead of using image-uploader, which relies on the old
UploadMixin, we can now use the uppy-image-uploader which
uses the new UppyUploadMixin which is stable enough and
supports both regular XHR uploads and direct S3 uploads,
controlled by a site setting (default to XHR).
At some point it may make sense to rename uppy-image-uploader
back to image-uploader, once we have gone through plugins
etc. and given a bit of deprecation time period.
This commit also fixes `for_private_message`, `for_site_setting`,
and `pasted` flags not being sent via uppy uploads onto the
UploadCreator, both via regular XHR uploads and also through
external/multipart uploads.
The uploaders changed are:
* site setting images
* badge images
* category logo
* category background
* group flair
* profile background
* profile card background
The host's category was successfully updated on the database, but the category property was not properly set when rendering the component for the first time.
* DEV: Remove HTML setting type and sanitization logic.
We concluded that we don't want settings to contain HTML, so I'm removing the setting type and sanitization logic. Additionally, we no longer allow the global-notice text to contain HTML.
I searched for usages of this setting type in the `all-the-plugins` repo and found none, so I haven't added a migration for existing settings.
* Mark Global notices containing links as HTML Safe.
Administrators can use second factor to confirm granting admin access
without using email. The old method of confirmation via email is still
used as a fallback when second factor is unavailable.
Translations are often multi-line. Using a regular `<input>` doesn't allow newlines, so if you try to edit a multiline theme translation, all the line breaks will be removed.
This commit updates the theme translations UI to use `<textarea>`, just like the core translation editing UI.
Major changes included:
- better support for screen readers
- trapping focus in modals
- better tabbing order in composer
- alerts on no content found/number of items found
- better autofocus in modals
- mini-tag-chooser is now a multi-select component
- each multi-select-component will now display selection on one row
* FIX: Revoking admin or moderator status doesn't require refresh to delete/anonymize/merge user
On the /admin/users/<id>/<username> page, there are action buttons that are either visible or hidden depending on a few fields from the AdminDetailsSerializer: `can_be_deleted`, `can_be_anonymized`, `can_be_merged`, `can_delete_all_posts`.
These fields are updated when granting/revoking admin or moderator status. However, those updates were not being reflected on the page. E.g. if a user is granted moderation privileges, the 'anonymize user' and 'merge' buttons still appear on the page, which is inconsistent with the backend state of the user. It requires refreshing the page to update the state.
This commit fixes that issue, by syncing the client model state with the server state when handling a successful response from the server. Now, when revoking privileges, the buttons automatically appear without refreshing the page. Similarly, when granting moderator privileges, the buttons automatically disappear without refreshing the page.
* Add detailed user response to spec for changed routes.
Add tests to verify that the revoke_moderation, grant_moderation, and revoke_admin routes return a response formatted according to the AdminDetailedUserSerializer.
We rely on yarn workspaces so we don't want people using npm in the repo by accident.
Also updated the required node version to 12+.
~~Not sure about the min yarn version – the latest one could be missing in various CI-like envs, so I might change it yet.~~
Downgraded yarn to ">= 1.21.1" (the oldest of "current" versions, tagged "legacy")
This PR adds a hover title to a few columns on the admin users' page
/admin/users/list/active
The hover title will show the date in full format on those columns with shortened dates
Using an invalid value was allowed. This commit tries to automatically
fix the color by adding missing # symbol or will show an error to the
user if it is not possible and it is not a CSS color either.
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
* FEATURE: add penalty history when silencing a user
Display penalty history (last 6 months) when silencing/suspending a user
* FEATURE: allow default penalty values to be chosen
Adds a site setting that designates default penalty values in hours.
Silence/suspend modals will auto-fill in the default values, but otherwise
will still allow moderators to pick and overwrite values as normal.
First silence/suspend: first value
Second silence/suspend: second value
etc.
Penalty counts are forgiven at the same rate as tl3 promotion requirements do.
Co-authored-by: jjaffeux <j.jaffeux@gmail.com>
