* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
This feature used to be controlled by two site settings
enable_personal_email_messages and min_trust_to_send_email_messages.
I removed enable_personal_email_messages and unhide
min_trust_to_send_email_messages to simplify the process of
enabling / disabling this feature.
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
This adds a new min_trust_level_to_allow_ignore site setting that enables admins to control the point at which a user is allowed to ignore other users.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Since 9e4ed03, moderators can view groups with visibility level set to "Group owners, members and moderators".
This fixes an issue where moderators can see the group in /g but then get a 404 when clicking on individual groups.
In some restricted setups all JS payloads need tight control.
This setting bans admins from making changes to JS on the site and
requires all themes be whitelisted to be used.
There are edge cases we still need to work through in this mode
hence this is still not supported in production and experimental.
Use an example like this to enable:
`DISCOURSE_WHITELISTED_THEME_REPOS="https://repo.com/repo.git,https://repo.com/repo2.git"`
By default this feature is not enabled and no changes are made.
One exception is that default theme id was missing a security check
this was added for correctness.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
* FIX: guardian always got user but sometimes it is anonymous
```
def initialize(user = nil, request = nil)
@user = user.presence || AnonymousUser.new
@request = request
end
```
AnonymouseUser defines `blank?` method
```
class AnonymousUser
def blank?
true
end
...
end
```
so if we would use @user.present? it would be correct, however, just @user is always true
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
FIX: raised a proper NotFound exception when filtering groups by username with invalid username.
FIX: properly filter the groups based on current user visibility when viewing another user's groups.
DEV: Guardian.can_see_group?(group) is now using Guardian.can_see_groups(groups) instead of duplicating the same code.
FIX: spec for groups_controller#index when group directory is disabled for logged in user.
FIX: groups_controller.sortable specs to actually test all sorting combinations.
DEV: s/response_body/body/g for slightly shorter spec code.
FIX: rewrote the "view another user's groups" specs to test all group_visibility and members_group_visibility combinations.
DEV: Various refactoring for cleaner and more consistent code.
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
This means that TL0 users can message groups with "Who can message this
group?" set to "Everyone".
It also means that members of a group with "Who can message this
group?" set to "members, moderators and admins" can also message the
group, even when their trust level is below min_trust_to_send_messages.
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
This feature (when enabled) will allow for invite_only sites to require
external authentication before they can redeem an invite.
- Created hidden site setting to toggle this
- Enables sending invites with local logins disabled
- OAuth button added to invite form
- Requires OAuth email address to match invite email address
- Prevents redeeming invite if OAuth authentication fails
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
If you turn it on now, default all users to approved since they were
previously. Also support approving a user that doesn't have a reviewable
record (it will be created first.)
This also includes a refactor to move class method calls to
`DiscourseEvent` into an initializer. Otherwise the load order of
classes makes a difference in the test environment and some settings
might be triggered and others not, randomly.
* FIX: allow sending PMs to staff via flag even when PMs are disabled
FIX: allow sending PMs to staff via flag even if the user trust level is insufficient
* Update lib/topic_creator.rb
Co-Authored-By: techAPJ <arpit@techapj.com>
This makes more sense than having the guardian take an accessor.
The logic belongs in the Serializer, where the JSON is calculated.
Also removed some of the DRYness in the spec. It's fewer lines
and made it easier to test the option on the serializer.
* FEATURE: Added MaxMindDb to resolve IP information.
* FEATURE: Added browser detection based on user agent.
* FEATURE: Added recently used devices in user preferences.
* DEV: Added acceptance test for recently used devices.
* UX: Do not show 'Show more' button if there aren't more tokens.
* DEV: Fix unit tests.
* DEV: Make changes after code review.
* Add more detailed unit tests.
* Improve logging messages.
* Minor coding style fixes.
* DEV: Use DropdownSelectBoxComponent and run Prettier.
* DEV: Fix unit tests.
previously admin got a free pass and could set theme via cookie to anything
including themes that are not selectable
this refactor ensures that only "preview" gets a free pass, all the rest
goes through the same pipeline
These site settings are very hard to explain and only applicable for very
specific Discourse setups.
If an admin "enables staged users" which is used in support scenarios then
all staff can send "messages" directly to an "email".
The setting allows you to extend this to TL4 or any trust level.
Actual use case would be a support type setup with restricted staff. It is
quite rare so hiding this for now and re-evaluate keeping the setting in
2019
* FIX: don't allow inviting more than `max_allowed_message_recipients` setting allows
* add specs for guardian
* user preferences for auto track shouldn't be applicable to PMs (it auto watches on visit)
Execlude PMs from "Automatically track topics I enter..." and "When I post in a topic, set that topic to..." user preferences
* groups take only 1 slot in PM
* just return if topic is a PM
* Phase 0 for user-selectable theme components
- Drops `key` column from the `themes` table
- Drops `theme_key` column from the `user_options` table
- Adds `theme_ids` (array of ints default []) column to the `user_options` table and migrates data from `theme_key` to the new column.
- Removes the `default_theme_key` site setting and adds `default_theme_id` instead.
- Replaces `theme_key` cookie with a new one called `theme_ids`
- no longer need Theme.settings_for_client
Somewhere there was a regression and a user couldn't remove their own
title. If they selected '(none)' in the UI it would say it was saved,
but it would not actually be updated in the db.
There are 4 visibility levels
- public (default)
- members only
- staff
- owners
Note, admins and group owners ALWAYS have visibility to groups
Migration treated old "non public" as "members only"
