Disabling shared drafts used to leave topics in an inconsistent state
where they were not displayed as shared drafts and thus there was no
way of publishing them. Moreover, they were accessible just to users
who have permissions to create shared drafts.
This commit adds another permission check that is used for most
operations and the old can_create_shared_draft? remains used just when
creating a new shared draft.
Using "UrlHelper#absolute" returns the S3 URL, which is fine for the client because it modifies it to use the CDN instead. On the other hand, this replacement doesn't happen when the URL is server-side rendered, returning a 403 for the system's avatar.
* document user endpoints, allow for empty request/response bodies
* document more user endpoints, improve debugging output if no details are specified
* document some more user endpoints
* minor cleanup
* FIX: flakey tests due to bad regex
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Not when doing a site-wide search like we do in the Directory.
This solves the following specfailure:
1) DirectoryItemsController with data finds user by name
Failure/Error: expect(json['directory_items'].length).to eq(1)
expected: 1
got: 0
(compared using ==)
# ./spec/requests/directory_items_controller_spec.rb:88:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:271:in `block (2 levels) in <top (required)>'
# ./bundle/ruby/2.7.0/gems/webmock-3.11.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
When doing a user search (eg. when mentioning a user) we will not prioritie
users who hasn't been seen in over a year.
REFACTOR the user-search specs to be more precise regarding the ordering
This cookie is only used during login. Having it persist after that can
cause some unusual behavior, especially for sites with short session
lengths.
We were already deleting the cookie following a new signup, but not for
existing users.
This commit moves the cookie deletion logic out of the erb template, and
adds logic and tests to ensure it is always deleted consistently.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
A simplified version of the logic used in the function before my fix is as follow:
```ruby
result = []
things = [0,1,2,3]
max_values = 2
every = (things.size.to_f / max_values).ceil
things.each_with_index do |t, index|
next unless (t % every) === 0
result << t
end
p result # [0, 2]
# 3 doesn’t get included
```
The problem is that if you get unlucky two times you won't get last tuple(s) and might get a very erroneous date.
Double unlucky:
- last tuple index % computed every !== 0 and you don't get the last tuple
- the last tuple is related to a post with a very different date than the previous tuples (on year difference in our case)
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
- Read in schemas from actual json files instead of a ruby hash. This is
helpful because we will be automatically generating .json schema files
from json responses and don't want to manually write ruby hash schema
files.
- Create a helper method for rspec schema validation tests to dry up code
* DEV: Add schema checking to api doc testing
This commit improves upon rswag which lacks schema checking. rswag
really only checks that the https status matches, but this change adds
in the json-schema_builder gem which also has schema validation.
Now we can define schemas for each of our requests/responses in the
`spec/requests/api/schemas` directory which will make our documentation
specs a lot cleaner.
If we update a serializer by either adding or removing an attribute the
tests will now fail (this is a good thing!). Also if you change the type
of an attribute say from an array to a string the tests will now fail.
This will help significantly with keeping the docs in sync with actual
code changes! Now if you change how an endpoint will respond you will
have to update the docs too in order for the tests to pass. :D
This PR is inspired by:
https://www.tealhq.com/post/how-teal-keeps-their-api-tests-and-documentation-in-sync
* Swap out json schema validator gem
Swapped out the outdated json-schema_builder gem with the json_schemer
gem.
* Add validation fields to schema
In order to have "strict" validation we need to add
`additionalProperties: false` to the schema, and we need to specify
which attributes are required.
Updated the debugging test output to print out the error details if
there are any.
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
There was an issue that occurred with this order of operations:
* An IMAP topic was created by emailing a group
* A second user was invited to the topic (not the OP and not the group)
* A user with access to the group replies to the topic
* The second user receives a user_private_message notification email because of their involvement in the topic
* The second user replies to the email via email
This new reply would then go and notify the other group PM users, except for those who emailed the group topic directly, which is handled via the group SMTP mailer. However because the new post already has an incoming email because it is parsed via the Email::Receiver via POP3 the group SMTP section of the post alerter is skipped, and the group's email address is not ignored for the user_private_message notification.
This PR fixes it so the group is not ever sent an email via the PM notification. This is important because any new emails in the group's IMAP inbox will be picked up by the Imap::Sync code and created as a new topic which is not at all desirable.
Also in this PR I split up the specs a bit more for group SMTP in the post alerter to make them easier to read and they each only test one thing.
As per @davidtaylorhq 's comment at 6e2be3e#r46069906, this fixes an oversight where if login_required is enabled and an anon user follows a confirm new email link they are forced to login, which is not what the intent of #10830 was.
It returned a 429 error code with a 'Retry-After' header if a
RateLimiter::LimitExceeded was raised and unhandled, but the header was
missing if the request was limited in the 'RequestTracker' middleware.
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This adds a safe default to not process pop3 emails when the pop3 polling option is set up that are > 1 week old. This is to avoid the situation where an older mailbox is used, which causes us to go and process all emails in that mailbox, sending out error emails to the senders of emails which cannot be parsed successfully.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
Transient errors in migration are ignored, silently corrupting
data, and the migration is incomplete and misses many sources of
uploads, which will lead to an incorrect expectation of independence
from the remote object storage after announcing that the migration
was successful, regardles of whether transient errors permanently
corrupted the data.
Remove this migration until such time as it is re-written to
follow the same pattern has the migration to s3, moving the
core logic out of the task.
Fixes bug introduced by bd25627198
What happens is we send notifications to everyone involved in the group inbox topic about new posts, however we pass the param `skip_send_email_to: email_addresses`. In the above commit I removed the group email address from this `email_addresses` array. This breaks the IMAP inbox because we email the group with the reply, and the IMAP sync tool finds this email and opens a new unrelated topic with it.
This results in some fun disasters if allowed to happen. For now, just issue an oblique error message; a localized message will be added on the client.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Added GET user by external_id to the api docs.
Fixed `/users/{username}` docs to be `/u/{username}`
Extracted out common user response into a shared helper.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
* FEATURE: Import attachments
* FEATURE: Add support for importing multiple forums in one
* FEATURE: Add support for category and tag mapping
* FEATURE: Import groups
* FIX: Add spaces around images
* FEATURE: Custom mapping of user rank to trust levels
* FIX: Do not fail import if it cannot import polls
* FIX: Optimize existing records lookup
Co-authored-by: Gerhard Schlager <mail@gerhard-schlager.at>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
