Prior to this fix `context.membership&.update!(last_viewed_at: Time.zone.now)` would generate an update statement from a GET request which is not permitted by default when in readonly mode.
The usual fix in this case is to check for readonly or rescue an error, however, this common pattern of updating "last seen" or similar can be better handled in a `Schedule::Defer` block, which won't raise the `ActiveRecord::ReadOnlyError` when in readonly and will also prevent the controller to wait for this operation.
Prior to this commit we were loading a large number of thread messages without any pagination. This commit attempts to fix this and also improves the following points:
- code sharing between channels and threads:
Attempts to reuse/share the code use in channels for threads. To make it possible part of this code has been extracted in dedicated helpers or has been improved to reduce the duplication needed.
Examples of extracted helpers:
- `stackingContextFix`: the ios hack for rendering bug when momentum scrolling is interrupted
- `scrollListToMessage`, `scrollListToTop`, `scrollListToBottom`: a series of helper to correctly scroll to a specific position in the list of messages
- better general performance of listing messages:
One of the main changes which has been made is to remove the computation of visible message during scroll, it will only happen when needed (update last read for example). This constant recomputation of `message.visible` on intersection observer event while scrolling was consuming a lot of CPU time.
Someone who cannot chat is also not able to join chat channels,
so we may not check all the time user.can_chat? && user.can_join_chat_channel?
and just call user.can_join_chat_channel? instead.
This commit attempts to fix an issue where we are ending
up with bad created_at date formats for last messages, which
is breaking the DM sort order and sometimes causing DM channels
to fall off the list, or show "Invalid date" on mobile.
I have not been able to consistently reproduce these issues
locally, however the serialzier for the channels index uses
MultiJSON.dump() and the Chat::Publisher uses .to_json, both of
which format created_at differently for messages.
The former is `2023-07-05T06:53:25.977Z` (iso8601).
The latter is `2023-07-14 03:59:22 UTC` (.to_s default).
Since we are doing comparison and sorting of these dates on the UI
we need consistent formatting for the JS Date parsers (and moment)
to deal with.
If the issue still occurs after this we can investigate further.
It could only occur on message created by the user itself and deleted while the user was looking at the channel.
It more generally fix the trash service which was not correctly setting the author of the delete.
This commit replaces two existing screens:
- draft
- channel selection modal
Main features compared to existing solutions
- features are now combined, meaning you can for example create multi users DM
- it will show users with chat disabled
- it shows unread state
- hopefully a better look/feel
- lots of small details and fixes...
Other noticeable fixes
- starting a DM with a user, even from the user card and clicking <kbd>Chat</kbd> will not show a green dot for the target user (or even the channel) until a message is actually sent
- it should almost never do a full page reload anymore
---------
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Jordan Vidrine <30537603+jordanvidrine@users.noreply.github.com>
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Co-authored-by: Mark VanLandingham <markvanlan@gmail.com>
This will be used when we move the channel creation for DMs
to happen when we first send a message in a DM channel to avoid
a double-request. For now we can just have a new API endpoint
for creating this that the existing frontend code can use,
that uses the new service pattern.
This also uses the new policy pattern for services where the policy
can be defined in a class so a more dynamic reason for the policy
failing can be sent to the controller.
Co-authored-by: Loïc Guitaut <loic@discourse.org>
Enabling/Disabling threading has been possible through command line until now. This commit introduces two new UIs:
- When creating a channel, it will be available once the category has been selected
- On the settings page of a channel for admins
Followup to 1526d1f97d
This commit fixes an N1 for mentions/user status
when querying chat threads. This only happened if
any of the thread OMs had mentions.
To export chat messages, go to `/admin/plugins/chat` and click the Create export
button in the _Export chat messages_ section. You'll receive a direct message
when the export is finished.
Currently, this exports all messages from the last 6 months, but not more than
10000 messages.
This exports all chat messages, including messages from private channels and
users' direct conversations. This also exports messages that were deleted.
This method is a huge footgun in production, since it calls
the Redis KEYS command. From the Redis documentation at
https://redis.io/commands/keys/:
> Warning: consider KEYS as a command that should only be used in
production environments with extreme care. It may ruin performance when
it is executed against large databases. This command is intended for
debugging and special operations, such as changing your keyspace layout.
Don't use KEYS in your regular application code.
Since we were only using `delete_prefixed` in specs (now that we
removed the usage in production in 24ec06ff85)
we can remove this and instead rely on `use_redis_snapshotting` on the
particular tests that need this kind of clearing functionality.
This commit adds a tracking dropdown to each individual thread, similar to topics,
that allows the user to change the notification level for a thread manually. Previously
the user had to reply to a thread to track it and see unread indicators.
Since the user can now manually track threads, the thread index has also been changed
to only show threads that the user is a member of, rather than threads that they had sent
messages in.
Unread indicators also respect the notification level -- Normal level thread tracking
will not show unread indicators in the UI when new messages are sent in the thread.
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
This fixes an issue where a user could send an empty
string as a chat message .e.g ' ' and the message would
be posted. We don't want this, we need to strip the message
first before validating for length etc.
Since 5cce829 and the new
channel view builder, we have no need of these obsolete
routes which have way too much logic in the controller, which
has been superseded by the view builder anyway.
Remove the routes and update the channel message loading to use it.
This PR adds status to mentions in chat and makes those mentions receive live updates.
There are known unfinished part in this implementation: when posting a message, status on mentions on that message appears immediately, but only if a user used autocomplete when typing the message. If user copy and paste a message with mentions into chat composer, those mentions won't have user status on them.
PRs with fixes for both problems are following soon.
Preparations for this PR that were made previously include:
- DEV: correct a relationship – a chat message may have several mentions 0dcfd7ddec
- DEV: extract the logic for extracting and expanding mentions from ChatNotifier 75b81b6854
- DEV: Always create chat mention records fa543cda06
- DEV: better split create_notification! and send_notifications logic e292c45924
- DEV: more tests for mentions when updating chat messages e7292e1682
- DEV: extract updating status on mentions into a lib function e49d338c21
- DEV: Create and update chat message mentions earlier 35a414bb38
- DEV: Create a chat_mention record when self mentioning 2703f2311a
- DEV: When deleting a chat message, do not delete mention records f4fde4e49b
After this change, in order to join a chat channel, a user needs to be in a group with at least “Reply” permission for the category. If the user only has “See” permission, they are able to preview the channel, but not join it or send messages. The auto-join function also follows this new restriction.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
This commit adds an initial thread list UI. There are several limitations
with this that will be addressed in future PRs:
* There is no MessageBus reactivity, so e.g. if someone edits the original
message of the thread it will not be reflected in the list. However if
the thread title is updated the original message indicator will be updated.
* There is no unread functionality for threads in the list, if new messages
come into the thread there is no indicator in the UI.
* There is no unread indicator on the actual button to open the thread list.
* No pagination.
In saying that, this is the functionality so far:
* We show a list of the 50 threads that the user has most recently participated
in (i.e. sent a message) for the channel in descending order.
* Each thread we show a rich excerpt, the title, and the user who is the OM creator.
* The title is editable by staff and by the OM creator.
* Thread indicators show a title. We also replace emojis in the titles.
* Thread list works in the drawer/mobile.
Every replies creates a thread, even when threading is disabled. This is how we ensure we can go back and forth. However, a message bus event should only be published when threading is enabled, otherwise frontend will attempt to display a thread which is not possible when disabled.
This fixes a silent background 404 when doing a reply in a direct message channel or a non threading enabled category channel.
This commit implements all the necessary logic to create thread seamlessly. For this it relies on the same logic used for messages and generates a `staged-id`(using the format: `staged-thread-CHANNEL_ID-MESSAGE_ID` which is used to re-conciliate state client sides once the thread has been persisted on the backend.
Part of this change the client side is now always using real thread and channel objects instead of sometimes relying on a flat `threadId` or `channelId`.
This PR also brings three UX changes:
- thread starts from top
- number of buttons on message actions is dependent of the width of the enclosing container
- <kbd>shift + ArrowUp</kbd> will reply to the last message
* FIX: Link to thread for mentions inside thread
When mentioning a user in a thread, when we send the
notification and display it in the UI we want the URL
of the notification to point to the thread URL to open
the panel, rather than the main channel which is confusing.
For now, we don't have a way to highlight the linked-to message
in the thread, we can revisit this later.
* FIX: Mark mention notifications read when thread opens
Since we have no scrolling/message visibility/thread membership
for now, when a user opens the thread panel we just want to mark
all mention notifications relating to messages in the thread
for the user as read.
This was reverted in 38cebd3ed5.
The issue was that I was using Discourse.redis.delete_prefixed
which does a slow redis KEYS lookup, which is not advised in
production. This commit removes that, and also ensures the periodical
thread count update only happens if threading is enabled.
I changed to use a redis INCR/DECR for reply count
cache. This avoids a round trip to redis to GET the current
count, and also avoids multi-process issues, where
if there's two processes trying to increment at the
same time, they may both receive the same value, add one
to it, then both write the same value back.
Then, it's only n+1 instead of n+2.
This also prevents almost all chat scheduled jobs from
running if chat is disabled, the only one remaining is
the message retention job.
This commit moves the category channel creation out
of the Chat::Api::Channel controller and into a
dedicated CreateCategoryChannel service. A follow up
commit will move the DM channel creation out of
the old DirectMessageChannelCreator service.
Also includes a new on_model_errors helper
for chat service class usage, that collects model
validation errors to present in a nice way.
---------
Co-authored-by: Loïc Guitaut <loic@discourse.org>
We currently don't have a nice UI to show unread messages for the thread,
and it will take some time to create one. For now, this commit makes it so
new messages inside a thread do not count towards a chat channel's unread
counts, and new messages sent in a thread do not update a user's `last_read_message_id`
for a channel.
In addition, this PR refactors the `Chat::ChannelFetcher` to use the `Chat::ChannelUnreadsQuery`
query class for consistency, and made said class able to return zeroed-out records
for channels the user is not a member of.
Finally, a small bug is fixed here where if a user's `last_read_message_id` for
a channel was a thread's OM ID, then the thread OM would not show in the
main channel stream for them until another reply to the channel was posted.
This commit introduces a redis cache over the top of the thread
replies_count DB cache, so that we can quickly and accurately
increment/decrement the reply count for all users and not have
to constantly update the database-level count. This is done so
the UI can have a count that is displayed to the users on each
thread indicator, that appears to live update on each chat
message create/trash/recover inside the thread.
This commit also introduces the `Chat::RestoreMessage` service
and moves the restore endpoint into the `Api::ChannelMessages`
controller as part of incremental migrations to move things out
of ChatController.
Finally, this commit refactors `Chat::Publisher` to be less repetitive
with its `MessageBus` sending code.
When a chat message is trashed and the message is used
for someone's UserChatChannelMembership#last_read_message_id,
the user would end up with some read state issues until
someone posted a new message in the channel, since we didn't
clear it like we did on bulk message delete.
This commit fixes the issue, and also takes the opportunity
to start a MessagesController in the API namespace, and move
the trash message functionality into the new service format.
We keep getting this failure on the spec but I
cannot reproduce locally, add this extra log line
to see if it helps:
```
> Chat::Api::ChatablesController#index with chat permissions does not return DM channels for users who are not in the chat allowed group
> Failure/Error: example.run
>
> expected: 200
> got: 500
>
> (compared using ==)
> # ./plugins/chat/spec/requests/chat/api/chatables_controller_spec.rb:158:in `block (4 levels) in <main>'
> # ./spec/rails_helper.rb:358:in `block (2 levels) in <top (required)>'
> # ./vendor/bundle/ruby/3.2.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
> # ------------------
> # --- Caused by: ---
> #
> # expected: 200
> # got: 500
> #
> # (compared using ==)
> # ./plugins/chat/spec/requests/chat/api/chatables_controller_spec.rb:158:in `block (4 levels) in <main>'
```
This commit adds a keyboard shortcut (Shift+ESC) for chat which marks all
of the chat channels that the user is currently a following member of as read,
updating their `last_read_message_id`. This is done via a new service.
It also includes some refactors and controller changes:
* The old mark message read route from `ChatController` is now supplanted
by the `Chat::Api::ReadsController#update` route.
* The new controller can handle either marking a single or all messages read,
and uses the correct service based on the route and params.
* The `UpdateUserLastRead` service is now used (it wasn't before), and has been slightly
updated to just use the guardian user ID.
Prior to this change `registered_bookmarkable` would return `nil` as `type` in `Bookmark.registered_bookmarkable_from_type(type)` would be `ChatMessage` and we registered a `Chat::Message` class.
This commit will now properly rely on each model `polymorphic_class_for(name)` to help us infer the proper type from a a `bookmarkable_type`.
Tests have also been added to ensure that creating/destroying chat message bookmarks is working correctly.
---
Longer explanation
Currently when you save a bookmark in the database, it's associated to another object through a polymorphic relationship, which will is represented by two columns: `bookmarkable_id` and `bookmarkable_type`. The `bookmarkable_id` contains the id of the relationship (a post ID for example) and the `bookmarkable_type` contains the type of the object as a string by default, (`"Post"` for example).
Chat plugin just started namespacing objects, as a result a model named `ChatMessage` is now named `Chat::Message`, to avoid complex and risky migrations we rely on methods provided by rails to alter the `bookmarkable_type` when we save it: we want to still save it as `"ChatMessage"` and not `"Chat::Message"`. And, to retrieve the correct model when we load the bookmark from the database: we want `"ChatMessage"` to load the `Chat::Message` model and not the `ChatMessage`model which doesn't exist anymore.
On top of this the bookmark codepath is allowing plugins to register types and will check against these types, so we alter this code path to be able to do a similar ChatMessage <-> Chat::Message dance and allow to check the type is valid. In the specific case of this commit, we were retrieving a `"ChatMessage"` bookmarkable_type from the DB and looking for it in the registered bookmarkable types which contain `Chat::Message` and not `ChatMessage`.
This commit main goal was to comply with Zeitwerk and properly rely on autoloading. To achieve this, most resources have been namespaced under the `Chat` module.
- Given all models are now namespaced with `Chat::` and would change the stored types in DB when using polymorphism or STI (single table inheritance), this commit uses various Rails methods to ensure proper class is loaded and the stored name in DB is unchanged, eg: `Chat::Message` model will be stored as `"ChatMessage"`, and `"ChatMessage"` will correctly load `Chat::Message` model.
- Jobs are now using constants only, eg: `Jobs::Chat::Foo` and should only be enqueued this way
Notes:
- This commit also used this opportunity to limit the number of registered css files in plugin.rb
- `discourse_dev` support has been removed within this commit and will be reintroduced later
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
adds an animation on bottom arrow
better scrolling behavior, we should now always correctly keep the scroll position while loading more
reactions are now more reactive, and will update their tooltip without needed to close/reopen it
skeleton has been improved with placeholder images and reactions
when making a reaction on the desktop message actions, the menu won't move anymore
simplify logic and stop maintaining a list of unloaded messages
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
* FIX: Use pluralized string
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Fix misuse of pluralized string
* DEV: Remove linting of `one` key in MessageFormat string, it doesn't work
* REFACTOR: Fix misuse of pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff. The string is quite complicated, so the best option was to switch to MessageFormat.
* REFACTOR: Fix misuse of pluralized string
* FIX: Use pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff.
* REFACTOR: Correctly pluralize reaction tooltips in chat
This also ensures that maximum 5 usernames are shown and fixes the number of "others" which was off by 1 if the current user reacted on a message.
* REFACTOR: Use translatable string as comma separator
* DEV: Add comment to translation to clarify the meaning of `%{identifier}`
* REFACTOR: Use translatable comma separator and use explicit interpolation keys
* REFACTOR: Don't interpolate lowercase channel status
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Don't interpolate channel status
* REFACTOR: Use %{count} interpolation key
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Correctly pluralize DM chat channel titles
Adds a new LookupThread class that handles finding the
thread based on thread + channel ID, checking permissions
and policy/contract checks.
Co-authored-by: Loïc Guitaut <loic@discourse.org>
This commit introduces the skeleton of the chat thread UI. The
structure of the components looks like this. Its done this way
so the side panel can be used for other things as well if we wish,
not just for threads:
```
.main-chat-outlet
<ChatLivePane />
<ChatSidePanel>
<-- rendered with {{outlet}} -->
<ChatThread />
</ChatSidePanel>
```
Later on the `ChatThreadList` will be rendered here as well.
Now, when you go to a channel you can open a thread by clicking
on either the Open Thread message action button or by clicking on
the reply indicator. This will take you to a route like `chat/c/:slug/:channelId/t/:threadId`.
This works on mobile as well.
This commit includes basic serializers and routes for threads,
as well as a new `ChatThreadsManager` service in JS that caches
threads for a channel the same way the channel threads manager does.
The chat messages inside the thread are intentionally left out
until a later PR.
**NOTE: These changes are gated behind the site setting enable_experimental_chat_threaded_discussions
and the threading_enabled boolean on a ChatChannel**
This is a combined work of Martin Brennan, Loïc Guitaut, and Joffrey Jaffeux.
---
This commit implements a base service object when working in chat. The documentation is available at https://discourse.github.io/discourse/chat/backend/Chat/Service.html
Generating documentation has been made as part of this commit with a bigger goal in mind of generally making it easier to dive into the chat project.
Working with services generally involves 3 parts:
- The service object itself, which is a series of steps where few of them are specialized (model, transaction, policy)
```ruby
class UpdateAge
include Chat::Service::Base
model :user, :fetch_user
policy :can_see_user
contract
step :update_age
class Contract
attribute :age, :integer
end
def fetch_user(user_id:, **)
User.find_by(id: user_id)
end
def can_see_user(guardian:, **)
guardian.can_see_user(user)
end
def update_age(age:, **)
user.update!(age: age)
end
end
```
- The `with_service` controller helper, handling success and failure of the service within a service and making easy to return proper response to it from the controller
```ruby
def update
with_service(UpdateAge) do
on_success { render_serialized(result.user, BasicUserSerializer, root: "user") }
end
end
```
- Rspec matchers and steps inspector, improving the dev experience while creating specs for a service
```ruby
RSpec.describe(UpdateAge) do
subject(:result) do
described_class.call(guardian: guardian, user_id: user.id, age: age)
end
fab!(:user) { Fabricate(:user) }
fab!(:current_user) { Fabricate(:admin) }
let(:guardian) { Guardian.new(current_user) }
let(:age) { 1 }
it { expect(user.reload.age).to eq(age) }
end
```
Note in case of unexpected failure in your spec, the output will give all the relevant information:
```
1) UpdateAge when no channel_id is given is expected to fail to find a model named 'user'
Failure/Error: it { is_expected.to fail_to_find_a_model(:user) }
Expected model 'foo' (key: 'result.model.user') was not found in the result object.
[1/4] [model] 'user' ❌
[2/4] [policy] 'can_see_user'
[3/4] [contract] 'default'
[4/4] [step] 'update_age'
/Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/update_age.rb:32:in `fetch_user': missing keyword: :user_id (ArgumentError)
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:202:in `instance_exec'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:202:in `call'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:219:in `call'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:417:in `block in run!'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:417:in `each'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:417:in `run!'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:411:in `run'
from <internal:kernel>:90:in `tap'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/app/services/base.rb:302:in `call'
from /Users/joffreyjaffeux/Code/pr-discourse/plugins/chat/spec/services/update_age_spec.rb:15:in `block (3 levels) in <main>'
```
Triggers a DiscourseEvent when a message is deleted, similar to
`:chat_message_created` and `:chat_message_edited`. This is not used
in this plugin, but can be used by other plugins to act when a message
is trashed.
Deleting a message with a mention doesn't clear the associated notification, confusing the mentioned user.
There are different chat notification types, but we only care about `chat_mentioned` since `chat_quoted` is associated with a post, and `chat_message` is only for push notifications.
Unfortunately, this change doesn't fix the chat bubble getting out of sync when a message gets deleted since we track unread/mentions count with an integer, making it a bit hard to manipulate. We can follow up later if we consider it necessary.
