This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
When emails were forwarded to a group inbox by the email address
of the group, for example when an email ends up in spam and must
be manually forwarded to the group+site@discoursemail.com address,
the OP of the topic ended up being the group's email address instead
of the sender who originally sent the email to the group inbox.
This commit detects that an email has been forwarded using existing
tools, and if the from address matches one of the group incoming
email addresses, then we look at the forwarded email's from address
and use that instead for the incoming email from address as well as
the staged/regular user used for the Topic.user.
This will make it much cleaner to forward emails into a group inbox,
and will prevent issues with PostAlerter where the OP is double-notified
for these emails.
Currently, pinned topics are ordered by the `bumped_at` column. This behavior is not desired because it gives admins no control over the order of pinned topics. This PR makes pinned topics ordered by the `pinned_at` column. A topic that is pinned last appears first in topic lists. If an admin wants an already pinned topic to appear first in the list of pinned topics, they'll have to unpin that topic and pin it again.
Meta topic: https://meta.discourse.org/t/how-do-i-set-the-order-of-pinned-topics/16935/23?u=osama.
* FIX: Revoking admin or moderator status doesn't require refresh to delete/anonymize/merge user
On the /admin/users/<id>/<username> page, there are action buttons that are either visible or hidden depending on a few fields from the AdminDetailsSerializer: `can_be_deleted`, `can_be_anonymized`, `can_be_merged`, `can_delete_all_posts`.
These fields are updated when granting/revoking admin or moderator status. However, those updates were not being reflected on the page. E.g. if a user is granted moderation privileges, the 'anonymize user' and 'merge' buttons still appear on the page, which is inconsistent with the backend state of the user. It requires refreshing the page to update the state.
This commit fixes that issue, by syncing the client model state with the server state when handling a successful response from the server. Now, when revoking privileges, the buttons automatically appear without refreshing the page. Similarly, when granting moderator privileges, the buttons automatically disappear without refreshing the page.
* Add detailed user response to spec for changed routes.
Add tests to verify that the revoke_moderation, grant_moderation, and revoke_admin routes return a response formatted according to the AdminDetailedUserSerializer.
Emails can include the marker in a different language, depending on
site and user settings. The email receiver always looked for the marker
in default language.
This is useful in the DiscourseHub mobile app, currently the app queries
the `about.json` endpoint, which can raise a CORS issue in some cases,
for example when the site only accepts logins from an external provider.
Allow admins to configure exceptions to our Rails rate limiter.
Configuration happens in the environment variables, and work with both
IPs and CIDR blocks.
Example:
```
env:
DISCOURSE_MAX_REQS_PER_IP_EXCEPTIONS: >-
14.15.16.32/27
216.148.1.2
```
`nullable` is no longer a valid type, and types also can't be an empty
string, so just bringing a number of issues with types in compliance
with the openapi spec.
When a staff member clicks on a user's number of flagged posts, we redirect them to the review queue, so it makes sense to count the number of items there to calculate the count.
We used to look at post action items to calculate this number, which doesn't match the number of items in the queue if old flags exist.
When a post is flagged with the reason of 'Something Else' a brief message can be added by the user which subsequently creates a `meta_topic` private message. The group `moderators` is automatically added to this topic.
If category group moderation is enabled, and the post belongs to a category with a reviewable group, that group should also be added to the meta_topic.
Note: This extends the `notify_moderators` logic, and will add the reviewable group to the meta_topic, regardless of the settings of that group.
The latest openapi spec version is v3.1.0
https://spec.openapis.org/oas/v3.1.0
Specifying the latest version will allow our openapi spec linter to use
this version and allow use to use the new type format that allows for
specifying a type as "null", which we need because sometimes our api
responses include null values instead of a "string", "integer", or
"object" type.
See: https://stackoverflow.com/a/48114322/588458
In 2018 check was added that TL1 welcome message is sent unless user already has BasicBadge granted.
I think we should also check if BasicBadge is even enabled. Otherwise, each time group is assigned to a user and trust level is recalculated, they will receive a welcome message.
When a user signs up via an external auth method, a new link is added to the signup modal which allows them to connect an existing Discourse account. This will only happen if:
- There is at least 1 other auth method available
and
- The current auth method permits users to disconnect/reconnect their accounts themselves
This handles a few edge cases which are extremely rare (due to the UI layout), but still technically possible:
- Ensure users are authenticated before attempting association.
- Add a message and logic for when a user already has an association for a given auth provider.
We weren't calling clear_all! for the rate limiter which
was the first problem, and the second problem was that it
is very odd to do state cleanup before tests instead of after,
so moved the disabling and clear_all! to after.
This reverts a part of changes introduced by https://github.com/discourse/discourse/pull/13947
In that PR I:
1. Disallowed topic feature links for TL-0 users
2. Additionally, disallowed just putting any URL in topic titles for TL-0 users
Actually, we don't need the second part. It introduced unnecessary complexity for no good reason. In fact, it tries to do the job that anti-spam plugins (like Akismet plugin) should be doing.
This PR reverts this second change.
This disallows putting URLs in topic titles for TL0 users, which means that:
If a TL-0 user puts a link into the title, a topic featured link won't be generated (as if it was disabled in the site settings)
Server methods for creating and updating topics will be refusing featured links when they are called by TL-0 users
TL-0 users won't be able to put any link into the topic title. For example, the title "Hey, take a look at https://my-site.com" will be rejected.
Also, it improves a bit server behavior when creating or updating feature links on topics in the categories with disabled featured links. Before the server just silently ignored a featured link field that was passed to him, now it will be returning 422 response.
* FIX: Update draft count when sequence is increased
Sometimes users ended up having a draft count higher than the actual
number of drafts.
* FIX: Do not update draft count twice
The call to DraftSequence.next! above already does it.
Group flair is not removed while removing a user from the group since the `before_save` callback methods are not triggered while using the `update_columns` method.
Discourse automatically sends a private message after backup or
restore finished. The private message used to contain the log inline
even when it was very long. A very long log can create issues because
the length of the post will be over the maximum allowed length of a
post. When that happens, Discourse will try to create an upload with
the logs. If that fails, it will trim the log and inline it.
