This commit makes sure we don't load all data into memory when doing CSV exports.
The most important change here made to the recently introduced export of chat
messages (3ea31f4). We were loading all data into memory in the first version, with
this commit it's not the case anymore.
Speaking of old exports. Some of them already use find_each, and it worked as
expected, without loading all data into memory. And it will proceed working as
expected after this commit.
In general, I made sure this change didn't break other CSV exports, first manually, and
then by writing system specs for them. Sadly, I haven't managed yet to make those
specs stable, they work fine locally, but flaky in GitHub actions, so I've disabled them
for now.
I'll be making more changes to the CSV exports code soon, those system specs will be
very helpful. I'll be running them locally, and I hope I'll manage to make them stable
while doing that work.
This implementation will need more work in the future. For simplification of tracking and other events (new thread, delete/restore OM...) we used the threads from `threadsManager` which makes pagination more complicated as we already have some results when we start.
Note this commit also simplify `Collection` to only have one `load` method which can be called repeatedly.
Why this change?
The specs are flaky on CI and we've unable to figure out why so we've
decided to skip them only on CI for now. The tests are still ran in our
internal build so we still have some protection in place.
Why is this change being made?
We've decided that the previous "community" section should look more
like a primary section that holds the most important navigation links
for the site and the word "community" doesn't quite fit that
description. Therefore, we've made the decision to drop the
section heading for the community section.
As part of removing the section heading, the following changes are made
as well:
1. Button to customize the section has been moved to the "footer" of the
"More..." section when `navigation_menu` site setting is set to `sidebar`.
When `navigation_menu` is set to `header dropdown`, a button to customize
the section is shown inline.
2. The section will no longer be collapsable.
3. The title of the section is no longer customisable as it is no longer
displayed. As a technical note, we have not dropped any previous
customisations of the section's title previously in case we have to
bring back the header in the future.
4. The new topic button that was previously present in the header has
been removed alongside the header. Admins can add a custom section
link to the `/new-topic` route if there would like to make it easier for
users to create a new topic in the sidebar.
This commit also standardize the naming pattern of modals: `<Chat::Modal::FooBar />` and changes css class accordingly.
Co-authored-by: David Taylor <david@taylorhq.com>
When the loading slider is enabled, the rendering of `application.hbs` is slightly delayed compared to the old 'spinner' strategy. This means that if a route tried to render a dialog during its `model()` hook, the dialog wrapper element would not be present and an error would occur.
This commit detects that situation and delays rendering the error until the next runloop iteration. If the element is still not found, we print a useful error to the console.
In the long term, we should ideally convert the dialog service to use a pure-ember rendering strategy instead of leaning on a11y-dialog. But for now, this workaround should resolve the problems identified by the chat system specs.
It's way more common to have presence enabled than disabled, so we should have been making it the default from start.
This commit also changes the namespace of `<ChatUserAvatar />` into `<Chat::UserAvatar />` and refactors tests.
When a user sends their first message in a thread we
automatically track the thread in the backend, but we
don't reflect this in the UI until the user re-opens
the thread. This commit fixes that by showing the new
tracking level in the UI.
Chat drawer was using the `DiscourseURL` hook `afterRouteComplete`. This hook suffer from a very poor implementation which makes it very unreliable:
```javascript
if (typeof opts.afterRouteComplete === "function") {
schedule("afterRender", opts.afterRouteComplete);
}
```
This commit attempts to return the promise from `handleURL` to directly use it and have a very reliable after transition hook.
In previous changes we prevented creating a channel to also make users follow the channel. We were forcing recipients to follow the channel on message sent but this was not including the creator of the message itself.
This commit fixes it and also write an end-to-end system spec to cover these cases. The message creator service is currently being rewritten and should correctly test and ensure this logic is present.
This commit also makes changes on the frontend to instantly follow a DM when you open it, this change prevents a green dot to appear for a split second when you send a message in a channel you were previously not following. Only recipients will see the green dot.
Followup to 802fb3b194
We should not hide the replies count if there is only 1 participant
for a thread, because this makes it look like the last reply is the
only reply.
This introduces a PLATFORM_KEY_MODIFIER const that
can be used both client and server side, to determine
whether we should be using the Meta or Ctrl key based
on whether the user is on Windows/Linux or Mac.
Why this change?
This change ensures that we scroll to the top of the message when
hovering over a message to ensure that the message actions container
that appears on hover is not hidden in the chat drawer when the content
of the chat message is long.
This commit includes several fixes and improvements to thread
original message handling:
1. When a thread's original message is deleted, the thread no longer
counts as unread for a user
2. When a thread original message is deleted and the user is looking
at the thread list, it will be removed from the list
3. When a thread original message is restored and the user is looking
at the thread list, it will be added back to the list if it was
previously loaded
In specific conditions (generally a small drawer, with a long message) it is possible to have the message’s actions menu to be displayed hover the drawer's header.
This is particularly hard to fix correctly using popper due to our positioning which is slightly at the limit of the container.
The proposed fix targets mostly the specs by ensuring the messages actions will be hidden before attempting to click any header's button.
Why this change?
In CI, we know we're clicking a link to a chat channel's threads list.
However, the threads list is not loaded and we want to add more
assertions here to try and figure out why. By asserting for the current
URL, we will at least know that the transition to the URL is successful.
- Presence needs to be explicitly set on the component now
- We were not checking and testing correctly the presence of the unread indicator in the menu
This commit replaces two existing screens:
- draft
- channel selection modal
Main features compared to existing solutions
- features are now combined, meaning you can for example create multi users DM
- it will show users with chat disabled
- it shows unread state
- hopefully a better look/feel
- lots of small details and fixes...
Other noticeable fixes
- starting a DM with a user, even from the user card and clicking <kbd>Chat</kbd> will not show a green dot for the target user (or even the channel) until a message is actually sent
- it should almost never do a full page reload anymore
---------
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Jordan Vidrine <30537603+jordanvidrine@users.noreply.github.com>
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Co-authored-by: Mark VanLandingham <markvanlan@gmail.com>
Why this change?
Chat system tests that opens the message actions on mobile have been
flaky on our CI. Those system test usually fails when the message
actions do not show up as expected causing subsequent actions to fail.
In the case of the `Reply to message - channel - mobile when the message has an existing thread replies to the existing thread`
system test, failure screenshot shows that we ended up navigating to the
thread instead of opening the message actions button. To understand why
this happens, we first need to understand that by default Capybara clicks
on the centre of an element. Also, we need to note that the HTML structure of
a chat message is like so:
```
<div class="chat-message-container">
<div class="chat-message">
<div class="chat-message-avatar" />
<div class="chat-message-content" />
<div class="chat-message-thread-indicator" />
</div>
</div>
```
Since `PageObjects::Pages::ChatChannel#expand_message_actions_mobile`
attempts to click on the `.chat-message-contaier`, there is a
possibility that the center of that element is the
`.chat-message-thread-indicator` element which would explain why we
navigated to the thread list instead of opening up the message actions.
This is possible because the content of the original chat message as
well as the message excerpt in the thread is randomly generated where the
length of the message and how the text wraps on mobile can affect the
height of the `.chat-message-content` element as thus its position in
the `.chat-message-container` element. In most cases, the middle of the
`.chat-message-container` happens to be the `.chat-message-content`
which is why this test "flakes" sometimes.
What is the solution?
Instead of clicking on the `.chat-message-container`, we be more
specific and click on the `.chat-message-content` element instead.
* DEV: Fix flaky thread nav spec
When we transitioned from the chat thread panel under some conditions
the request for the thread would come back and realise the component
was destroyed, which was trying to do a transition to the channel
itself.
Now we check for the previous route here too and transition to the
correct route.
* DEV: Fix chat transcript spec relying on animation
The on-animation-end modifier is not reliable in system specs
because it fires instantly (we have disabled capybara animations)
so the showCopySuccess boolean can be mutated back to false straight
away.
Better to have a separate boolean tracked with a data-attr that we
can reliably inspect in the system spec.
Why this change?
By ensuring the reset happens in an `ensure` code block, we ensure that
the code will always be run even if code fails or an error is raised.
This helps to prevent leaking custom network condition states and
improves the stability of our system tests.
- Inline mentions on posts
- Inline mentions on chat messages
- The user autocomplete for the composer
- The user autocomplete for chat
- The chat section of the sidebar
This will be used when we move the channel creation for DMs
to happen when we first send a message in a DM channel to avoid
a double-request. For now we can just have a new API endpoint
for creating this that the existing frontend code can use,
that uses the new service pattern.
This also uses the new policy pattern for services where the policy
can be defined in a class so a more dynamic reason for the policy
failing can be sent to the controller.
Co-authored-by: Loïc Guitaut <loic@discourse.org>
This has been flagged by our internal system as well and has been
failing on CI. Skip this for now to improve the stability of our system
test runs while we figure out why it is flaky.
Enabling/Disabling threading has been possible through command line until now. This commit introduces two new UIs:
- When creating a channel, it will be available once the category has been selected
- On the settings page of a channel for admins
Followup to c6b43ce68b
We can just use the rich excerpt everywhere since we know
we don't need text_entities -- that introduced security issues
just to fix a spec.
Introduced in cec68b3e2c,
this is flaky because if you click the back button before
the route is fully transitioned to the loaded thread,
we end up going to the history _before_ the thread list,
which ends up being the channel.
We need to make sure that everything is loaded for the
thread first, meaning the skeleton is not there.
Also exclude some noise from the capybara logs (image load failures)
* FEATURE: Sort thread list by unread threads first
This commit changes the thread list to show the threads that
have unread messages at the top of the list sorted by the
last reply date + time, then all other threads sorted by
last reply date + time.
This also fixes some issues by removing the last_reply
relationship on the thread, which did not work for complex
querying scenarios because its order would be discarded.
* FIX: Various fixes for thread list loading
* Use the channel.threadsManager and find the channel first rather
than use activeChannel in the threads manager, otherwise we may
be looking at differenct channels.
* Look at threadsManager directly instead of storing result for threads
list otherwise it can get out of sync because of replace: true in
other places we are loading threads into the store.
* Fix sorting for thread.last_reply, needed a resort.
When clicking back from a thread, we want to either go back to the
channel if the thread was opened from an indicator, or to the thread
list if we opened it from there. Since ember doesn't give a nice way
to get the previous route, we need to store this ourselves. We only
do this on mobile, on desktop we just follow existing behaviour.
Also implements a chat router history.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Updates the interface for implementing summarization strategies and adds a cache layer to summarize topics once.
The cache stores the final summary and each chunk used to build it, which will be useful when we have to extend or rebuild it.
This commit adds an aria-label attribute to cooked hashtags using
the post/chat message decorateCooked functionality. I have just used
the inner content of the hashtag (the tag/category/channel name) for
the label -- we can reexamine at some point if we want something
different like "Link to dev category" or something, but from what I
can tell things like Twitter don't even have aria-labels for hashtags
so the text would be read out directly.
This commit also refactors any ruby specs checking the HTML of hashtags
to use rspec-html-matchers which is far clearer than having to maintain
the HTML structure in a HEREDOC for comparison, and gives better spec
failures.
c.f. https://meta.discourse.org/t/hashtags-are-getting-a-makeover/248866/23?u=martin
- Moves `<ChatMessageInfo />` to `<Chat::Message::Info />`
- Moves `<ChatMessageAvatar />` to `<Chat::Message::Avatar />`
- Moves `<ChatMessageLeftGutter />` to `<Chat::Message::LeftGutter />`, adds tests
- Creates `<Chat::Message::Error />`
- Creates `<Chat::Message::MentionWarning />`, adds tests and a styleguide
- Creates a model for ChatMessageMentionWarning, adds fabricator for it
- Keeps the enter/leave viewport logic inside the `<ChatMessage />` component instead of bubbling it to the channel and thread components
- Adds a scale animation when clicking a reaction
- Creates `chat/later-fn` modifier which accepts a function and a delay. It allows to call a function Xms after a component has been inserted, it's useful for animations.
- Moves css code out of chat-message into relevant files
- Deletes unused code
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
- FIX: improves reactions and thread indicator touch event on mobile
These "buttons" are located inside a scroll list which makes them very specific. The general idea is to ensure these events are passive and are not bubbling to the parent.
- DEV: moves state on top level message node
- FIX: ensures popover arrow has the correct border
- FIX: makes a message expanded by default
- FIX applies the same ios scroll fix on thread and channel
- UI: better active/hover state for thread indicator
- UI: attempts to follow more closely our BEM naming scheme
- FIX: reduces bottom padding on message with thread indicator and user info hidden
- UI: add padding for first message in thread
- FIX: prevents actions backdrop to open thread
- UI: makes thread indicator resizable
This commit adds a tracking dropdown to each individual thread, similar to topics,
that allows the user to change the notification level for a thread manually. Previously
the user had to reply to a thread to track it and see unread indicators.
Since the user can now manually track threads, the thread index has also been changed
to only show threads that the user is a member of, rather than threads that they had sent
messages in.
Unread indicators also respect the notification level -- Normal level thread tracking
will not show unread indicators in the UI when new messages are sent in the thread.
The events leading to this mistake are unclear but we decided few months ago to make direct messages NOT flaggable and even wrote a spec for this, when we actually support flagging of direct messages.
This commit ensures it will show for direct messages channels and inverses the existing spec.
This commit fixes the selection of message in threads and also applies various refactorings
- improves specs and especially page objects/components
- makes the channel/thread panes responsible of the state
- adds an animationend modifier
- continues to follow the logic of "state" should be displayed as data attributes on component by having a new `data-selected` attribute on chat messages
This commit adds the initial part of thread indicator improvements:
* Show the reply count, last reply date and excerpt,
and the participants of the thread's avatars and
count of additional participants
* Add a participants component for the thread that
can be reused for the list
* Add a query class to get the thread participants
* Live update the thread indicator more consistently
with the last reply and participant details
image image
In subsequent PRs we will cache the participants since
they do not change often, and improve the thread list
further with participants.
This commit also adds a showPresence boolean (default
true) to ChatUserAvatar, since we don't want to show the
online indicator for thread participants.
---------
Co-authored-by: chapoi <charlie@discourse.org>
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
* move the chat unread indicator to top to match the profile avatar indicator
* add white border to profile avatar indicator (badge notification) to match chat indicator and userstatus styling
* change `.urgent` to BEM
* congregate all styling into mixin
* update chat index to use mixin
* update thread indicator to use mixin
* update header indicator to use mixin
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Co-authored-by: Martin Brennan <martin@discourse.org>
Currently navigating a long topic and then opening chat would cause the view to be scrolled to the bottom. Using `scrollTop` here ensures we correctly scroll to top.
This had been incorrectly moved into `deactivate` during another change.
* FIX: increases resize observer throttle delay
25ms is not necessary and was sometimes causing jankyness.
* FIX: removes ios momentum fix delay
Instead of a 50ms, simply use next+schedule("afterRender") to attempt to have the shortest delay possible.
* FIX: backdrop event propagation
Prevents backdrop touch to propagate to underlying channel/thread.
* UX: adds is-active class to container of active message
This change allows to keep the background on the active message while the actions menu is displayed.
* FIX: prevents skip-link to be selected on press
* UX: allows to close actions menu instantly
The backdrop should always receive events, we don't need to wait for the menu to be fully displayed.
* UI: adds spacing between last message and composer
* UI: makes backdrop less dark
* FIX: makes events passive on long-press modifier
This commit attempts to have a bullet proof solution to the following case:
- long press on message (finger is still pressed)
- menu appears
- a button is now at finger location
- user releases finger
- a click is triggered on the button
Classic event canceling solution won't work here for performance reasons as we need the event to be passive in a scroll list.
This commit contains multiple changes to improve the composer behavior especially in the context of a thread:
- Generally rename anything of the form `chatChannelThread...` to `chatThread...``
- Moves the textarea interactor instance inside the composer server
- Improves the focus state and closing of panel related to the use of the Escape shortcut
- Creates `Chat::ThreadList` as a component instead of having `Chat::Thread::ListItem` and others which could imply they were children of a the `Chat::Thread` component
One user can create a post or chat message with a hashtag they
have permission to use, but then when other users look at that
post they will see an empty space next to the hashtag because they
do not have the permission to load the colors in CSS classes for
the related category.
This fixes the issue by adding a default color with a special
CSS class if the user doesn't have permission to see the linked
channel/category on the hashtag.
What is the problem?
We were calling out to methods that calls `has_css?` or `has_selector?`
which returns a boolean. Since we are not using the return value, it
means the methods can be deemed unnecessary. However, we do want those
checks and this commit adds the necessarily assertions to make use of
the return values.
This reverts commit ddf4ecba04.
Causing a flaky test to appear:
```
main $ LOAD_PLUGINS=1 rspec plugins/chat/spec/system/chat/composer/shortcuts/channel_spec.rb
Randomized with seed 17765
.....F..
Failures:
1) Chat | composer | shortcuts | channel when using ArrowUp when last message is staged does not edit a message
Failure/Error: channel_page.send_message
expected `#<PageObjects::Components::Chat::Messages:0x00007fe823ac1710 @context=".chat-channel">.has_message?({:persisted=>true, :text=>"2"})` to be truthy, got false
[Screenshot Image]: /home/tgxworld/work/discourse/tmp/capybara/failures_r_spec_example_groups_chat_composer_shortcuts_channel_when_using_arrow_up_when_last_message_is_staged_does_not_edit_a_message_148.png
```
What is the problem?
We were calling out to methods that calls `has_css?` or `has_selector?`
which returns a boolean. Since we are not using the return value, it
means the methods can be deemed unnecessary. However, we do want those
checks and this commit adds the necessarily assertions to make use of
the return values.
If we're asserting that something is missing, we want to use
`has_no_css?` instead of `!has_css?` since `has_css?` will wait the full
capybara default wait time before return if the selector is not present.
- Made the emoji btn blue when composer is focused
- Moved everything chat-composer-button to its own file and BEM-ified it and making the choice to only work with our own is-disabled definition instead of with the attribute :disabled, for consistency
This should fix this failure:
```
Failures:
1) Thread list in side panel | full page when there are no threads that the user is participating in shows a message
Failure/Error: measurement = Benchmark.measure { example.run }
expected to find text "You are not participating in any threads in this channel." in "Community\nEverything\nMy Posts\nMore\nMessages\nInbox\nChannels\nRandom 25\nPersonal chat\nRandom 25\nShowing all messages\nOngoing discussions"
```
The screenshot failure was clearly showing the spinner still being present.
Rescuing them still makes timing-out tests fail but doesn't break `after` spec cleanup (which could trigger more errors) Using custom error class to avoid any other possible timeout-catching code.
Also:
* remove an unnecessary `.select { |x| x.size > 0 }`
* fix a typo in a test title
We were calling reset without the proper params which was causing errors in the console. This commit does the following changes:
- ensures `composer.cancel()` is the only way to cancel editing/reply
- adds a `draftSaved` property to chat message to allow for better tests
- writes a spec to ensure the flow is correct
- adds more page objects for better tests
- homogenize the default state of objects on chat message
Co-authored-by: Martin Brennan <martin@discourse.org>
Editing a message to an empty string and sending it, will delete it.
This commit also refactors a lot of channel/thread composer shortcuts specs.
---
This commit also includes various spec fixes which have been flakey while finishing this pull request.
This changes the thread header positioning of the
unread indicator to match the designs based on the route:
1. When the channel is open, show the indicator of # unread
threads with the icon
2. When the threads list is open, show no indicator since
you are on the list and can see which threads are unread
3. When a single thread is open, show the unread threads
indicator along with a left < back button, with a label
to show that this goes back to ongoing discussions
Drawer changes to come in another PR.
Why is this change required?
In the `PageObjects::Components::Chat::Messages#has_no_message?` method,
it ended up calling `has_selector` when trying to assert that the
selector is not present. This is an anti-pattern which results in us
waiting the full Capybara default wait time
What is this change required?
In the `chat/spec/system/transcript_spec.rb` test, there is a helper
method that uses `page.has_css?` in a conditional but it do not
specify a wait time and hence the default Capybara default max wait
time is used. However, there is no need for us to be waiting here so
we specify the `wait: 0` option.
This commit introduces a couple of changes:
1. When editing a chat channel's slug, we were using `this.model.set("title", title)` when the `set`
function does not exist. This was actually throwing the error in the
"can edit slug" system test where the modal was not closed after
saving and was flashing an error.
2. Introduce `PageObjects::Pages::ChatChannelAbout` and
`PageObjects::Modals::ChatChannelEdit` page object to encapsulate
logic better.
When a thread is created / a new message is created in the
thread, we want to make sure that the original message user
has a membership for that thread, otherwise they will not
receive unread indicators for messages in the thread.
This commit attempts to fix the case where the messages loaded initially don't fill the screen. It would prevent user to scroll and as a result to load more.
There are multiple fixes in this commit:
- the main fix is removing this code which was preventing the actual fill:
```javascript
// prevents an edge case where user clicks bottom arrow
// just after scrolling to top
if (loadingPast && this.#isAtBottom()) {
return;
}
```
- ensures we always give a page site to the `chatApi.channel(...)` call if we have one, in the current state when `fetchFromLastRead` was `true` we would not set `args.page_size`
- ensures the `query_paginated_messages` is having a valid page size, which is not nil and not > `MAX_PAGE_SIZE`
- write a spec for the autofill, it was a challenging spec to write but it should give us the confidence we need here
* Moved the settings cog from thread list to thread and
put it in a new header component
* Remove thread original message component, no longer needed
and the list item and thread indicator styles/content
will be quite different
* Start adding content (unread indicator etc.) to the thread
list item and changing structure to be more like designs
* Serialize the last thread reply when opening the thread index,
show in list and update with message bus
The current behavior is to close drawer when pressing escape inside the input.
After this change, first escape will blur the input, and second escape will close the drawer.
This commit also refactors the whole shortcuts for drawer system spec.
#### FIX: Do not use client lastReadMessageId when fetching channel messages
We had an issue where the following happened:
1. User opened channel and saw the last message, and we set the
lastReadMessageId on the server and the client
2. User navigated to another channel
3. Another user deleted the message in the original channel
4. The first user navigated back to the original channel before
the MessageBus event for the deleted message arrived, and got
a 404 error because we were sending the deleted lastReadMessageId as
target_message_id to the channel controller.
Instead of this which is a bit flaky and is hard to cover all
the issues for, instead we can pass a fetch_from_last_read boolean
param to the channels controller, and just get the user's
last_read_message_id straight from the database to use for the
target_message_id. This gets rid of any sources of race conditions
or lack of updates from MessageBus.
#### FIX: Include missing memberships for thread tracking publish
When we publish the channel/message tracking state for a
user and that message was a thread reply the publisher
was erroring because we were not telling Chat::TrackingStateReportQuery
to return missing memberships (which have zeroed out unread counts)
as well, which is what we do for the channel tracking state here.
Also just make sure that the TrackingStateReport does not error
when passed an ID it doesn't have data for.
This flakey has been very visible by the new headless chrome. The problem was that after moving a message we automatically redirect to the channel where the message has been moved to. However, we were not explicitly waiting for this transition and a result it could happen that we attempt to check the presence of the message on the channel page before the redirect actually happened.
The various naming changes are due to an early mistake we made in chat specs to use `chat` as the variable name for the page object which prevents to use the automatic path `chat.channel_path(...)`.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit follows up b6c5a2da08
by serializing the user's thread memberships in these cases:
1. When we do the initial channel fetch with messages, we get
all threads and all the user's thread memberships for those
messages.
2. When the thread list is fetched, we get all the user's memberships
in that list.
3. When the single thread is fetched, either from opening it from
the list, an OM indicator, or just from doing .find() on the
manager when a new MessageBus message comes in
This will let us track the lastReadMessageId on the client, and
will also let us fix an issue where the unread indicator in the
channel header was incrementing for every thread that got a
new message, regardless of whether the user was a member.
This commit adds the thread index and individual thread
in the index list unread indicators, and wires up the message
bus events to mark the threads as read/unread when:
1. People send a new message in the thread
2. The user marks a thread as read
There are several hacky parts and TODOs to cover before
this is more functional:
1. We need to flesh out the thread scrolling and message
visibility behaviour. Currently if you scroll to the end
of the thread it will just mark the whole thread read
unconditionally.
2. We need to send down the thread current user membership
along with the last read message ID to the client and
update that with read state.
3. We need to handle the sidebar unread dot for when threads
are unread in the channel and clear it based on when the
channel was last viewed.
4. We need to show some indicator of thread unreads on the
thread indicators on original messages.
5. UI improvements to make the experience nicer and more
like the actual design rather than just placeholders.
But, the basic premise around incrementing/decrementing the
thread overview count and showing which thread is unread
in the list is working as intended.
This should also make `message_notifications_with_sidebar_spec.rb` more resilient as we are now checking for `is-persisted` class instead of checking for the absence of `is-staged`.
This commit attempts to correctly change draft when the channel changes. It moves responsibility to the composer instead of the channel.
A new service `chatDraftsManager` is being introduced here to allow finer control and pave the way for future thread draft support.
These changes also now allow an editing message to be stored as a draft.
This PR adds status to mentions in chat and makes those mentions receive live updates.
There are known unfinished part in this implementation: when posting a message, status on mentions on that message appears immediately, but only if a user used autocomplete when typing the message. If user copy and paste a message with mentions into chat composer, those mentions won't have user status on them.
PRs with fixes for both problems are following soon.
Preparations for this PR that were made previously include:
- DEV: correct a relationship – a chat message may have several mentions 0dcfd7ddec
- DEV: extract the logic for extracting and expanding mentions from ChatNotifier 75b81b6854
- DEV: Always create chat mention records fa543cda06
- DEV: better split create_notification! and send_notifications logic e292c45924
- DEV: more tests for mentions when updating chat messages e7292e1682
- DEV: extract updating status on mentions into a lib function e49d338c21
- DEV: Create and update chat message mentions earlier 35a414bb38
- DEV: Create a chat_mention record when self mentioning 2703f2311a
- DEV: When deleting a chat message, do not delete mention records f4fde4e49b
Followup to c908eeacc9
Instead of using the latest message ID in the channel, which
could cause issues if you have an earlier last read message ID
that matches the deleted one, instead we use the first non-deleted
message that comes before the deleted message by ID.
Followup ae3231e140, when a
message is trashed we already update the lastReadMessageId of
all users in the channel to the latest non-deleted message on
the server side. However we didn't propagate this to the client,
so in some cases when we did the following:
1. Delete the last message in the channel
2. Switch to another channel
3. Switch back to the original
We would get a 404 error from the target message ID being looked
up still being the old lastReadMessageId (now deleted) for the
user's channel membership.
All we need to do is send the last not-deleted message ID for
the channel (or thread) to all the member users.
It easier to check for presence in this case that to check for something not present, as depending on performance of the machine running the test this could take sometime to be changed and the test would fail.
This issue was especially visible in tests. the `@debounce(100)` was not cancelled when changing channel which was causing 404s as we were trying to load messages on a channel which was deleted as the channel has been destroyed at the end of the test.
This is still not a perfect solution, as we can only cancel the start of `fetchMessages`, but we can't cancel the actual `chatApi.channel` request which result can potentially happens after channel changed, which we try to mitigate with various checks on to ensure visible channel == loaded messages channel.
This commit also tries to make handler naming and cancelling more consistent.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This commit makes some fundamental changes to how hashtag cooking and
icon generation works in the new experimental hashtag autocomplete mode.
Previously we cooked the appropriate SVG icon with the cooked hashtag,
though this has proved inflexible especially for theming purposes.
Instead, we now cook a data-ID attribute with the hashtag and add a new
span as an icon placeholder. This is replaced on the client side with an
icon (or a square span in the case of categories) on the client side via
the decorateCooked API for posts and chat messages.
This client side logic uses the generated hashtag, category, and channel
CSS classes added in a previous commit.
This is missing changes to the sidebar to use the new generated CSS
classes and also colors and the split square for categories in the
hashtag autocomplete menu -- I will tackle this in a separate PR so it
is clearer.
- few improved alignments
- displays emoji picker button inline on desktop
- keeps composer focused when focusing dropdown button
- align buttons to bottom when increasing height of textarea
- max-height of textarea is now linked to the height of the screen
Co-authored-by: chapoi <charlie@discourse.org>
- Improves styleguide support
- Adds toggle color scheme to styleguide
- Adds properties mutators to styleguide
- Attempts to quit a session as soon as done with it in system specs, this should at least free resources faster
- Refactors fabricators to simplify them
- Adds more fabricators (uploads for example)
- Starts implementing components pattern in system specs
- Uses Chat::Message creator to create messages in system specs, this should help to have more real specs as the side effects should now happen
The failure screenshot shows the message is on screen while the error is:
```
Failure/Error: example.run
expected to find text "My favorite message" in "Community\nEverything\nMy Posts\nMore\nMessages\nInbox\nChannels\nPolitics 1\nPersonal chat\nPolitics 1". (However, it was found 1 time including non-visible text.)
```
I expect the arrow element might e slightly hiding the link, but not 100% sure of this.
This issue was for example possibly causing the last visit indicator to be reset by `sent` messages events.
The following was happening:
- a user (bob) had a last message bus ID of 1 on a channel (id:1) subscription
- bob then go to another channel (id:2), unsubscribing from updates of channel (id:1)
- another user (laura) then send messages to channel (id:1)
- bob goes back to channel (id:1)
At this point we we doing in the same sequence:
- loading channel with messages, getting a new last message bus id
- subscribing to updates using the last known message bus id
Most of the times we were lucky enough for this to work (no events while away, or just got the new id in time...) but it was also very likely to do a double fetch of messages as MessageBus would think we were late.
This commit fixes the shift+click multi selection in threads. We were not correctly using the manager of the message and would attempt to find messages in the channel instead of the thread.
The `activeThread` was also not correctly set sometimes.
Also adds tests for message selection in threads.
After this change, in order to join a chat channel, a user needs to be in a group with at least “Reply” permission for the category. If the user only has “See” permission, they are able to preview the channel, but not join it or send messages. The auto-join function also follows this new restriction.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
This commit adds an initial thread list UI. There are several limitations
with this that will be addressed in future PRs:
* There is no MessageBus reactivity, so e.g. if someone edits the original
message of the thread it will not be reflected in the list. However if
the thread title is updated the original message indicator will be updated.
* There is no unread functionality for threads in the list, if new messages
come into the thread there is no indicator in the UI.
* There is no unread indicator on the actual button to open the thread list.
* No pagination.
In saying that, this is the functionality so far:
* We show a list of the 50 threads that the user has most recently participated
in (i.e. sent a message) for the channel in descending order.
* Each thread we show a rich excerpt, the title, and the user who is the OM creator.
* The title is editable by staff and by the OM creator.
* Thread indicators show a title. We also replace emojis in the titles.
* Thread list works in the drawer/mobile.
The spec now checks we are in the state we expect to be before clicking bottom button. The bottom button could show while it's still loading and on slow systems cause failures.
Checking "uploading" string is tricky because it both takes time before showing, and when it will show it will show for a short period of time. I prefer to reduce the surface tested here while still getting some confidence out of it and making the test more reliable.
- `ChatChannel`
- `UserChatChannelMembership`
Also creates a new `chat-direct-message` model used as the object for the`chatable` property of the `ChatChannel` when the `ChatChannel` is a direct message channel. When the chatable is a category a real `Category` object will now be returned.
Archive state of a `ChatChannel` is now hold in a `ChatChannelArchive` object.
When hovering a thread indicator in a channel we will now append two `<link rel="preload" ...>` to the `<head>` of the document. Clicking on it should be significantly faster.
Co-authored-by: Martin Brennan <martin@discourse.org>
This commit implements all the necessary logic to create thread seamlessly. For this it relies on the same logic used for messages and generates a `staged-id`(using the format: `staged-thread-CHANNEL_ID-MESSAGE_ID` which is used to re-conciliate state client sides once the thread has been persisted on the backend.
Part of this change the client side is now always using real thread and channel objects instead of sometimes relying on a flat `threadId` or `channelId`.
This PR also brings three UX changes:
- thread starts from top
- number of buttons on message actions is dependent of the width of the enclosing container
- <kbd>shift + ArrowUp</kbd> will reply to the last message
See e323628d8a for more details.
This commit speeds up the tests by roughly 10 seconds locally where the
default wait time is 2 seconds. On CI, this speeds up the tests by 20
seconds where the default wait time is 4 seconds.
* FIX: Link to thread for mentions inside thread
When mentioning a user in a thread, when we send the
notification and display it in the UI we want the URL
of the notification to point to the thread URL to open
the panel, rather than the main channel which is confusing.
For now, we don't have a way to highlight the linked-to message
in the thread, we can revisit this later.
* FIX: Mark mention notifications read when thread opens
Since we have no scrolling/message visibility/thread membership
for now, when a user opens the thread panel we just want to mark
all mention notifications relating to messages in the thread
for the user as read.
It seems more reliable to revert state at the end of the it block. In another PR I noticed that the network state was leaking in other tests when I was reverting in the after block.
Also trashes a suspicious spec.
This will avoid the messages actions floating around while scrolling. Note it's not testing the thread counterpart yet as I have a plan in mind to tests channels and threads in a clean way in the near future.
Before this fix if the underlying model of a reviewable was changed, the filter wouldn't work anymore as it was expecting a 1:1 relation between filter type and model name.
This commit also relies on the `Reviewable.types` array to check against valid types instead of a regex not checking much.
Finally this commit adds a spec to ensure chat reviewables are listable from the review index page.
- using BEM notation
- making animation linear instead of default ease
- small tweaks to composer state (disabled/send-disabled/send-enabled)
- fixing bug with disabled composer on mobile
- It seems that `window_opened_by/within_window` it not reliable in our current setup/test
- System specs should avoid at all cost to rely on backend state, any change should be visible one way or another on the front to be properly tested
It's very hard to repro but under specific circumstances I suspect it was possible for this sequence to happen:
- set message TEXT
- cooking starts
- set message COOKED through another mean (like a message bus)
- the cooking started sooner finished and erases the cooked set at the step before causing the message to have the incorrect cooked
After removing `TextareaTextManipulation` from `ChatComposer` and using `TextareaInteractor` as a proxy, one function has been forgotten: `paste(event)` which is not available in glimmer components anymore, and even less avaiable now that the mixin is not tied to a component anymore but a real DOM node. As a solution we now add a manual paste event listener which will call `paste(event)`.
This pull request is a full overhaul of the chat-composer and contains various improvements to the thread panel. They have been grouped in the same PR as lots of improvements/fixes to the thread panel needed an improved composer. This is meant as a first step.
### New features included in this PR
- A resizable side panel
- A clear dropzone area for uploads
- A simplified design for image uploads, this is only a first step towards more redesign of this area in the future
### Notable fixes in this PR
- Correct placeholder in thread panel
- Allows to edit the last message of a thread with arrow up
- Correctly focus composer when replying to a message
- The reply indicator is added instantly in the channel when starting a thread
- Prevents a large variety of bug where the composer could bug and prevent sending message or would clear your input while it has content
### Technical notes
To achieve this PR, three important changes have been made:
- `<ChatComposer>` has been fully rewritten and is now a glimmer component
- The chat composer now takes a `ChatMessage` as input which can directly be used in other operations, it simplifies a lot of logic as we are always working a with a `ChatMessage`
- `TextareaInteractor` has been created to wrap the existing `TextareaTextManipulation` mixin, it will make future migrations easier and allow us to have a less polluted `<ChatComposer>`
Note ".chat-live-pane" has been renamed ".chat-channel"
Design for upload dropzone is from @chapoi
This commit fixes an issue where if you pressed a format
shortcut (e.g. bold, italic, code) for the composer and
you had the thread panel open as well, the shortcut would
trigger in both composers, not just the one that was focused.
We currently don't have a nice UI to show unread messages for the thread,
and it will take some time to create one. For now, this commit makes it so
new messages inside a thread do not count towards a chat channel's unread
counts, and new messages sent in a thread do not update a user's `last_read_message_id`
for a channel.
In addition, this PR refactors the `Chat::ChannelFetcher` to use the `Chat::ChannelUnreadsQuery`
query class for consistency, and made said class able to return zeroed-out records
for channels the user is not a member of.
Finally, a small bug is fixed here where if a user's `last_read_message_id` for
a channel was a thread's OM ID, then the thread OM would not show in the
main channel stream for them until another reply to the channel was posted.
Followup to bd5c5c4b5f,
this commit hooks up the bulk delete events for chat
messages inside the thread panel, by fanning out the
deleted message IDs based on whether they belong to
a thread or not.
Also adds a system spec to cover this case, as previously
the bulk delete event would have been broken with an incorrect
`typ` rather than `type` hash key.
This regression happened in bd5c5c4b5f and is due to `message_bus_targets = calculate_publish_targets(chat_channel, chat_message)` expecting a `chat_channel` which was only defined after.
Example exception in logs:
```
Job exception: undefined local variable or method `chat_channel' for Chat::Publisher:Module
/var/www/discourse/plugins/chat/app/services/chat/publisher.rb:91:in `publish_processed!'
/var/www/discourse/plugins/chat/app/jobs/regular/chat/process_message.rb:21:in `block in execute'
/var/www/discourse/lib/distributed_mutex.rb:53:in `block in synchronize'
/var/www/discourse/lib/distributed_mutex.rb:49:in `synchronize'
/var/www/discourse/lib/distributed_mutex.rb:49:in `synchronize'
/var/www/discourse/lib/distributed_mutex.rb:34:in `synchronize'
/var/www/discourse/plugins/chat/app/jobs/regular/chat/process_message.rb:7:in `execute'
/var/www/discourse/app/jobs/base.rb:249:in `block (2 levels) in perform'
```
This commit also:
- adds a spec to ensure oneboxing is not regressing anymore
- increment the version on message processed to ensure callbacks are correctly ran
Note we should also have more tests in `Chat::Publisher`, this will be done when we move it to a proper service.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This commit introduces a ChatChannelPaneSubscriptionsManager
and a ChatChannelThreadPaneSubscriptionsManager that inherits
from the first service that handle MessageBus subscriptions
for the main channel and the thread panel respectively.
This necessitated a change to Chat::Publisher to be able to
send MessageBus messages to multiple channels based on whether
a message was an OM for a thread, a thread reply, or a regular
channel message.
An initial change to update the thread indicator with new replies
has been done too, but that will be improved in future as we have
more data to update on the indicators.
Still remaining is to fully move over the handleSentMessage
functionality which includes scrolling and new message indicator
things.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
- Back button in drawer will bring you back to channel
- Larger font for thread indicator
- Prevents screen flashing due to clearing messages when they were already loaded
- Fixes a bug where did-update params were inverted causing an error when expanding/collapsing drawer
This feature will allow sites to define which emoji are not allowed. Emoji in this list should be excluded from the set we show in the core emoji picker used in the composer for posts when emoji are enabled. And they should not be allowed to be chosen to be added to messages or as reactions in chat.
This feature prevents denied emoji from appearing in the following scenarios:
- topic title and page title
- private messages (topic title and body)
- inserting emojis into a chat
- reacting to chat messages
- using the emoji picker (composer, user status etc)
- using search within emoji picker
It also takes into account the various ways that emojis can be accessed, such as:
- emoji autocomplete suggestions
- emoji favourites (auto populates when adding to emoji deny list for example)
- emoji inline translations
- emoji skintones (ie. for certain hand gestures)
This commit introduces a new thread indicator for channels with `threading_enabled`
set to true and the `enable_exp` site setting set to true. In addition, in the main channel
stream we now hide all messages that are linked to threads except for the original message,
disabling the concept of an "echo mode" for now, we may revisit this in future. We also
remove the jigsaw puzzle "Open Thread" button for message actions, since the thread
indicator can just be used instead.
This also stops the `Chat::Publisher` from sending any messages related to chat
messages that are linked to a thread, unless that chat message is the OM of the
thread. A subsequent PR will link up all MessageBus events within the thread panel,
and for the message indicators.
Another subsequent PR will add the excerpt of the latest message in each thread,
as well as the avatars of the users messaging in the thread.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Followup to c1dc6a2db4,
this commit just missed removing one of the @computed
decorators which was causing multiple active channels
to show in the sidebar. Fix the issue and introduce a
system spec to catch this.
- clicking empty area on the header will toggle collapse/expand it
- applies a background on hover of the channel title
- active state for small buttons
- the back button now has the correct icon color when hovered
- adds missing focus state for heade buttons icons
When hovering the chat message actions we are technically not hovering the message anymore, which was removing the background and is slightly unexpected. This commit ensures we keep this background until closing the message actions.
This PR primarily fixes this case:
- USER A message
- USER B message
- USER B reply to USER A message <-- not showing user info when it should
Moreover, this commit also improves the spec to correctly test more cases.
This commit is a major overhaul of how chat message actions work, to make it so they are reusable between the main chat channel and the chat thread panel, as well as many improvements and fixes for the thread panel.
There are now several new classes and concepts:
* ChatMessageInteractor - This is initialized from the ChatMessage, ChatMessageActionsDesktop, and ChatMessageActionsMobile components. This handles permissions about what actions can be done for each
message based on the context (thread or channel), handles the actions themselves (e.g. copyLink, delete, edit),
and interacts with the pane of the current context to modify the UI
* ChatChannelThreadPane and ChatChannelPane services - This represents the UI context which contains the
messages, and are mostly used for state management for things like message selection.
* ChatChannelThreadComposer and ChatChannelComposer - This handles interaction between the pane, the
message actions, and the composer, dealing with reply and edit message state.
* Scrolling logic for the messages has now been moved to a helper so it can be shared between the main channel pane and the thread pane
* Various improvements with the emoji picker on both mobile and desktop. The DOM node of each component is now located outside of the message which prevents a large range of issues.
The thread panel now also works in the chat drawer, and the thread messages have less
actions than the main panel, since some do not make sense there (e.g. moving messages to
a different channel). The thread panel title, excerpt, and message sender have also been removed
for now to save space.
This gives us a solid base to keep expanding on and fixing up threads. Subsequent PRs will
make the thread MessageBus subscriptions work and disable echo mode
for the initial release of threads.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Followup to a0381157e9, we just
need to make sure we set currentUserMembership.last_read_message_id
to the last_read_message_id from the updated memberships after marking
all channels read, otherwise we do not scroll to the bottom and still
show the "last visit" separators in channels that have been
marked read.
This commit adds a keyboard shortcut (Shift+ESC) for chat which marks all
of the chat channels that the user is currently a following member of as read,
updating their `last_read_message_id`. This is done via a new service.
It also includes some refactors and controller changes:
* The old mark message read route from `ChatController` is now supplanted
by the `Chat::Api::ReadsController#update` route.
* The new controller can handle either marking a single or all messages read,
and uses the correct service based on the route and params.
* The `UpdateUserLastRead` service is now used (it wasn't before), and has been slightly
updated to just use the guardian user ID.
There are many situations that may cause users to lose permission to
send messages in a chat channel. Until now we have relied on security
checks in `Chat::ChatChannelFetcher` to remove channels which the
user may have a `UserChatChannelMembership` record for but which
they do not have access to.
This commit takes a more proactive approach. Now any of these following
`DiscourseEvent` triggers may cause `UserChatChannelMembership`
records to be deleted:
* `category_updated` - Permissions of the category changed
(i.e. CategoryGroup records changed)
* `user_removed_from_group` - Means the user may not be able to access the
channel based on `GroupUser` or also `chat_allowed_groups`
* `site_setting_changed` - The `chat_allowed_groups` was updated, some
users may no longer be in groups that can access chat.
* `group_destroyed` - Means the user may not be able to access the
channel based on `GroupUser` or also `chat_allowed_groups`
All of these are handled in a distinct service run in a background
job. Users removed are logged via `StaffActionLog` and then we
publish messages on a per-channel basis to users who had their
memberships deleted.
When the user has a channel they are kicked from open, we show
a dialog saying "You no longer have access to this channel".
When they click OK we redirect them either:
* To their first other public channel, if they have any followed
* The chat browse page if they don't
This is to save on tons of requests from kicked out users getting messages
from other channels.
When the user does not have the kicked channel open, we can just
silently yoink it out of their sidebar and turn off subscriptions.
Prior to this fix, we wouldn't display reactions done on different tabs. So, if user A was reacting on tab 1, tab 2 wouldn't display this reaction.
Since few weeks ago we now have the guarantee to have uniq reactions on a message which should prevent any duplicate.
This commit also removes various skipped tests related to reactions and makes `sign_in` explicit at the beginning of each test.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Prior to this fix, the upload was removed from DOM when collapsed and not decorated again on expand, which was causing lightbox to not get reapplied. The fix is reverting to previous state where content was not removed from DOM.
This commit main goal was to comply with Zeitwerk and properly rely on autoloading. To achieve this, most resources have been namespaced under the `Chat` module.
- Given all models are now namespaced with `Chat::` and would change the stored types in DB when using polymorphism or STI (single table inheritance), this commit uses various Rails methods to ensure proper class is loaded and the stored name in DB is unchanged, eg: `Chat::Message` model will be stored as `"ChatMessage"`, and `"ChatMessage"` will correctly load `Chat::Message` model.
- Jobs are now using constants only, eg: `Jobs::Chat::Foo` and should only be enqueued this way
Notes:
- This commit also used this opportunity to limit the number of registered css files in plugin.rb
- `discourse_dev` support has been removed within this commit and will be reintroduced later
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Non-markdown tags weren't being escaped in chat excerpts. This could be
triggered by editing a chat message containing a tag (self XSS), or by
replying to a chat message with a tag (XSS).
Co-authored-by: Jan Cernik <jancernik12@gmail.com>
Usage:
```javascript
api.addChatDrawerStateCallback(({ isDrawerActive, isDrawerExpanded }) => {
// do something
});
```
Note this commit also uses this new API to add a css class (chat-drawer-active) on the body when the drawer is active.
* DEV: Change sidebar header dropdown to use wait_for_animation
Introduced in 54351e1b8a, this
helper should remove the need to have to add the .animated
CSS class in JS for the sidebar.
* DEV: Revert spec change
- Will consider a message read only one the bottom of the message has been read
- Will allow to mark a message bigger than the view port as read
- Code should be more performant as the scroll is doing less (albeit more often)
- Gives us a very precise scroll state. Problem with throttling scroll is that you could end up never getting the even where scrollTop is at 0, opening a whole range of edge cases to handle
When we introduced `existingUploads` as an arg to the
ChatComposerUploads component, we also introduced a bug where
if multiple uploads were being done at once, and the draft
was saved, then because of didReceiveAttrs we would cancel
the currently uploading files because the draft uploads became
the existingUploads.
To work around this, since we do want to keep this on didReceiveAttrs
for cases when the user opens a draft or edits another message,
the easiest thing to do is to just not save uploads into the chat
draft if there are still uploads in progress. That way only when
all uploads are complete do we make them a part of the draft.
There is a small risk that the user could do something to lose
their uploads in the draft, but it's a better gamble to have
that happen rather than in progress uploads to be cancelled
while the user is waiting for them to be done because of the
draft.
Also changes the uploads system spec back to the old way of
attaching multiple files since that is why it was failing.
This is used when calling click_message_action_mobile to wait
for the message actions menu to finish animating up before
attempting to click on it using capybara. Without this, in
the time between capybara getting the x,y position of a menu
item to click on and the click being fired, the animating menu
can move that item out of the way.
With the new helper, we constantly compare x,y client rect positions
for the animating element and wait for them to stabilise. Once they
do, it means the animation is done, and it is safe to click on
anything within the element.
Re-enables mobile system specs for chat that were ignored because
of this.
- group writes when computing separators positions
- shows skeleton only on initial load
- forces date separator to be pinned when first message to prevent a pinned - not pinned - pinned sequence when loading more in past
- relies on `message.visible` property instead of checking `isElementInViewport`
- attempts to load next/prev messages earlier
- do not scroll to on fetch more
- hides `last visit` text while pinned
Note this test my prove to be flakey, so I might have to remove it or find a different solution. It's extremely complicated to test for something which shouldn't appear in a period of time and is not a present at T=0
This was possible due to specific events which are hard to represent in a test. The provided test is as close as possible to what was happening in production: a message bus event was played on a channel which has just loaded its state with the existing reaction.
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
adds an animation on bottom arrow
better scrolling behavior, we should now always correctly keep the scroll position while loading more
reactions are now more reactive, and will update their tooltip without needed to close/reopen it
skeleton has been improved with placeholder images and reactions
when making a reaction on the desktop message actions, the menu won't move anymore
simplify logic and stop maintaining a list of unloaded messages
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
This commit allows the user to set their preference vis-a-vis
the chat icon in the header of the page. There are three options:
- All New (default) - This maintains the existing behaviour where
all new messages in the channel show a blue dot on the icon
- Direct Messages and Mentions - Only show the green dot on the
icon when you are directly messaged or mentioned, the blue dot
is never shown
- Never - Never show any dot on the chat icon, for those who
want tractor-beam-laser-focus
Fixes issue introduced in 7ef482a292
where the correct warning message was not shown when enabling auto-join
for public categories when creating a channel. Adds more system specs
as well to avoid regressions.
* FIX: Use pluralized string
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Fix misuse of pluralized string
* DEV: Remove linting of `one` key in MessageFormat string, it doesn't work
* REFACTOR: Fix misuse of pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff. The string is quite complicated, so the best option was to switch to MessageFormat.
* REFACTOR: Fix misuse of pluralized string
* FIX: Use pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff.
* REFACTOR: Correctly pluralize reaction tooltips in chat
This also ensures that maximum 5 usernames are shown and fixes the number of "others" which was off by 1 if the current user reacted on a message.
* REFACTOR: Use translatable string as comma separator
* DEV: Add comment to translation to clarify the meaning of `%{identifier}`
* REFACTOR: Use translatable comma separator and use explicit interpolation keys
* REFACTOR: Don't interpolate lowercase channel status
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Don't interpolate channel status
* REFACTOR: Use %{count} interpolation key
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Correctly pluralize DM chat channel titles
Followup to b94fa3b87a,
which broke the functionality to click on a message
checkbox, hold shift, then click another one, and have
the messages inbetween selected. Add system spec to
catch this.
A typo was preventing a click on channel title when in drawer mode to correctly open the channel info in full page.
This commit fixes the typo and adds a test.
This commit introduces the skeleton of the chat thread UI. The
structure of the components looks like this. Its done this way
so the side panel can be used for other things as well if we wish,
not just for threads:
```
.main-chat-outlet
<ChatLivePane />
<ChatSidePanel>
<-- rendered with {{outlet}} -->
<ChatThread />
</ChatSidePanel>
```
Later on the `ChatThreadList` will be rendered here as well.
Now, when you go to a channel you can open a thread by clicking
on either the Open Thread message action button or by clicking on
the reply indicator. This will take you to a route like `chat/c/:slug/:channelId/t/:threadId`.
This works on mobile as well.
This commit includes basic serializers and routes for threads,
as well as a new `ChatThreadsManager` service in JS that caches
threads for a channel the same way the channel threads manager does.
The chat messages inside the thread are intentionally left out
until a later PR.
**NOTE: These changes are gated behind the site setting enable_experimental_chat_threaded_discussions
and the threading_enabled boolean on a ChatChannel**
Public channels were previously sorted by name, however, channels with a leading emoji in the name would always appear first in the list. By using slug we avoid this issue.
First follow-up to the feature introduced in #19034. We don't want to pollute main components like `chat-live-pane`, so we'll use a service to track and manage the state needed to display before-send warnings while composing a chat message.
We also move from acceptance tests to system specs.
This commit implements a requested feature: resizing the chat drawer.
The user can now adjust the drawer size to their liking, and the new size will be stored in localstorage so that it persists across refreshes. In addition to this feature, a bug was fixed where the --composer-right margin was not being correctly computed. This bug could have resulted in incorrectly positioned drawer when the composer was expanded.
Note that it includes support for RTL.
* FIX: Emoji autocomplete “more” button not working
* Rely on setting an intial value on the filter input
This commit removes custom logic applied on initial filter and instead gives a param to use as value for the input, automatically triggering the existing filtering handler.
Other notes:
- Slightly changes the API to be able to set a filter and open the composer in one go
- Adds a very simple service spec
- Adds a system spec to fully validate the behavior
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
* DEV: Rnemae channel path to just c
Also swap the channel id and channel slug params to be consistent with core.
* linting
* channel_path
* Drop slugify helper and channel route without slug
* Request slug and route models through the channel model if possible
* DEV: Pass messageId as a dynamic segment instead of a query param
* Ensure change is backwards-compatible
* drop query param from oneboxes
* Correctly extract channelId from routes
* Better route organization using siblings for regular and near-message
* Ensures sessions are unique even when using parallelism
* prevents didReceiveAttrs to clear input mid test
* we disable animations in capybara so sometimes the message was barely showing
* adds wait
* ensures finished loading
* is it causing more harm than good?
* this check is slowing things for no reason
* actually target the button
* more resilient select chat message
* apply similar fix to bookmark
* fix
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit introduces the ability to edit the channel
slug from the About tab for the chat channel when the user
is admin. Similar to the create channel modal functionality
introduced in 641e94f, if
the slug is left empty then we autogenerate a slug based
on the channel name, and if the user just changes the slug
manually we use that instead.
We do not do any link remapping or anything else of the
sort, when the category slug is changed that does not happen
either.
* DEV: Rnemae channel path to just c
Also swap the channel id and channel slug params to be consistent with core.
* linting
* channel_path
* params in wrong order
* Drop slugify helper and channel route without slug
* Request slug and route models through the channel model if possible
* Add client side redirection for backwards-compatibility
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
We've had the UploadReference table for some time now in core,
but it was added after ChatUpload was and chat was just never
moved over to this new system.
This commit changes all chat code dealing with uploads to create/
update/delete/query UploadReference records instead of ChatUpload
records for consistency. At a later date we will drop the ChatUpload
table, but for now keeping it for data backup.
The migration + post migration are the same, we need both in case
any chat uploads are added/removed during deploy.
This commit allows us to set the channel slug when creating new chat
channels. As well as this, it introduces a new `SlugsController` which can
generate a slug using `Slug.for` and a name string for input. We call this
after the user finishes typing the channel name (debounced) and fill in
the autogenerated slug in the background, and update the slug input
placeholder.
This autogenerated slug is used by default, but if the user writes anything
else in the input it will be used instead.
We refer to the channel name rather than title elsewhere
(including the new channel modal), so we should be consistent.
Title is an internal abstraction, since DM channels cannot have
names (currently).
Also change the name field on channel edit to a input type="text"
rather than a textarea, since we don't want a huge input here.
The spec was flaky because it was dependent on order,
when usernames got high enough sequence numbers in them
we would get this error:
> expected to find text "bruce99, bruce100" in "bruce100, bruce99"
Also move selectors into page object and use them in the
spec instead.
There was an issue with channel archiving, where at times the topic
creation could fail which left the archive in a bad state, as read-only
instead of archived. This commit does several things:
* Changes the ChatChannelArchiveService to validate the topic being
created first and if it is not valid report the topic creation errors
in the PM we send to the user
* Changes the UI message in the channel with the archive status to reflect
that topic creation failed
* Validate the new topic when starting the archive process from the UI,
and show the validation errors to the user straight away instead of
creating the archive record and starting the process
This also fixes another issue in the discourse_dev config which was
failing because YAML parsing does not enable all classes by default now,
which was making the seeding rake task for chat fail.
The problem here was that if your input has an Enter
listener (such as the chat message input) and the
`fill_in(with: str)` string has a `\n` at the end, this
is treated as an Enter keypress, so this `fill_in` was
submitting the chat message.
This commit fixes an issue where the chat message bookmarks
did not respect the user's `bookmark_auto_delete_preference`
which they select in their user preference page.
Also, it changes the default for that value to "keep bookmark and clear reminder"
rather than "never", which ends up leaving a lot of expired bookmark
reminders around which are a pain to clean up.
This commit is a series of fixes to improve stability of system tests following the use of threadsafe:
* Jobs.run_immediately in before block was causing issues
* During test a js error could be caused by an undefined this.details in chat-live-pane
* Apply the chat composer click trick everywhere when sending a message, it ensures we are not hiding anything with autocomplete
* There was another case not using send_message yet
This PR removes the limit added to max_users_notified_per_group_mention during #19034 and improve the performance when expanding mentions for large channel or groups by removing some N+1 queries and making the whole process async.
* Fully async chat message notifications
* Remove mention setting limit and get rid of N+1 queries
It should fix flakeys we have due to using_session. This commit is also fixing tests which were failing constantly with treadsafe enabled.
A test has also bene skipped as the issue couldn't be found so far.
More info: https://github.com/teamcapybara/capybara#threadsafe-mode
- improves UI by displaying channel status on it's own line
- ensures channel status is correctly updated right after the request on frontend
- adds status on info page
Recent changes surfaced the various issues with this codepath:
- we were not correctly reseting `messageLookup` leading to us trying to scroll to a non existing message in the view
- we were calling markAsRead which would scroll to the bottom, even if we had a target message
- we were not debouncing fetchMessages, which could cause multiple reload of the messages when loading it with a targetMessageId: first fetch from last read and then immediately fetch from targetMessageId
- other naming inconsistencies
- not handling drawer
This commit also adds tests for classic scenarios related to this use case.
I could repro the same failure by doing: `page.driver.browser.network_conditions = { offline: false, latency: 3000, throughput: 0 }`
Wait shouldn't be needed as we wait for selector, but I couldn't find a better solution on this case for now.
We are all in on system specs, so this commit moves all the chat quoting acceptance tests (some of which have been skipped for a while) into system specs.
Honestly seems like it's being in some weird loop for
discourse/hashtag_autocomplete_spec.rb for this:
```ruby
within topic_page.post_by_number(2) do
cooked_hashtags = page.all(".hashtag-cooked", count: 2)
expect(cooked_hashtags[0]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{category.url}\" data-type=\"category\" data-slug=\"cool-cat\"><svg class=\"fa d-icon d-icon-folder svg-icon svg-node\"><use href=\"#folder\"></use></svg><span>Cool Category</span></a>
HTML
expect(cooked_hashtags[1]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{tag.url}\" data-type=\"tag\" data-slug=\"cooltag\"><svg class=\"fa d-icon d-icon-tag svg-icon svg-node\"><use href=\"#tag\"></use></svg><span>cooltag</span></a>
HTML
end
```
I see this many times in the full logs with `SELENIUM_VERBOSE_DRIVER_LOGS=1`:
```
COMMAND FindElements {
"using": "css selector",
"value": "#post_2"
}
Followed by:
COMMAND FindChildElements {
"id": "26dfe542-659b-46cc-ac8c-a6c2d9cbdf0a",
"using": "css selector",
"value": ".hashtag-cooked"
}
```
Over and over and over, there are 58 such occurrences. I am beginning to
think `within` is just poison that should be avoided.
Previously, calling `sign_in` would cause the browser to be redirected to `/`, and would cause the Ember app to boot. We would then call `visit()`, causing the app to boot for a second time.
This commit adds a `redirect=false` option to the `/session/username/become` route. This avoids the unnecessary boot of the app, and leads to significantly faster system spec run times.
In local testing, this takes the full system-spec suite for chat from ~6min to ~4min.
- chat-message is not using chat-api yet and the `jsonMode` shouldn't have been added
- correctly error on `getChannel` not found
- adds/correct relevant system tests
Note this is a very large PR, and some of it could have been splited, but keeping it one chunk made it to merge conflicts and to revert if necessary. Actual new code logic is also not that much, as most of the changes are removing js tests, adding system specs or moving things around.
To make it possible this commit is doing the following changes:
- converting (and adding new) existing js acceptances tests into system tests. This change was necessary to ensure as little regressions as possible while changing paradigm
- moving away from store. Using glimmer and tracked properties requires to have class objects everywhere and as a result works well with models. However store/adapters are suffering from many bugs and limitations. As a workaround the `chat-api` and `chat-channels-manager` are an answer to this problem by encapsulating backend calls and frontend storage logic; while still using js models.
- dropping `appEvents` as much as possible. Using tracked properties and a better local storage of channel models, allows to be much more reactive and doesn’t require arbitrary manual updates everywhere in the app.
- while working on replacing store, the existing work of a chat api (backend) has been continued to support more cases.
- removing code from the `chat` service to separate concerns, `chat-subscriptions-manager` and `chat-channels-manager`, being the largest examples of where the code has been rewritten/moved.
Future wok:
- improve behavior when closing/deleting a channel, it's already slightly buggy on live, it's rare enough that it's not a big issue, but should be improved
- improve page objects used in chat
- move more endpoints to the API
- finish temporarily skipped tests
- extract more code from the `chat` service
- use glimmer for `chat-messages`
- separate concerns in `chat-live-pane`
- eventually add js tests for `chat-api`, `chat-channels-manager` and `chat-subscriptions-manager`, they are indirectly heavy tested through system tests but it would be nice to at least test the public API
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
* UX: added fadeout + hashtag styling
UX: add full name to autocomplete
UX: autocomplete mentions styling
UX: emoji styling user status
UX: autocomplete emoji
* DEV: Move hashtag tag counts into new secondary_text prop
* FIX: Add is-online style to mention users via chat
UX: make is-online avatar styling globally available
* DEV: Fix specs
* DEV: Test fix
Co-authored-by: Martin Brennan <martin@discourse.org>
Follow up to a review in #18937, this commit changes the HashtagAutocompleteService to no longer use class variables to register hashtag data sources or types in context priority order. This is to address multisite concerns, where one site could e.g. have chat disabled and another might not. The filtered plugin registers I added will not be included if the plugin is disabled.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
This commit adds variousMessageBus.last_ids to serializer payloads
for chat channels and the chat view (for chat live pane) so
we can use those IDs when subscribing to MessageBus channels
from chat.
This allows us to ensure that any messages created between the
server being hit and the UI loaded and subscribing end up being
delivered to the client, rather than just silently dropped.
This commit also fixes an issue where we were subscribing to
the new-messages and new-mentions MessageBus channels multiple
times when following/unfollowing a channel multiple times.
Refines the behavior of clicking the chat icon in mobile and when in drawer mode as follows: If chat is open, clicking the icon takes you to the index.
- better handling of drawer state using chat state manager
- removes various float and topic occurrences to use drawer
- ensures user can chat before doing a lot of chat setup
- fixes a bug which was creating presence errors in tests
- removes dead code
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
- Note this is also tweaking the UI a little bit as we are now using links/buttons in the header as needed
- It disables the find ideal channel in drawer mode, if loading `/chat` in drawer mode it will either reopen at the last position or just stay on index
Clicking a link of the sidebar will now open the drawer and load the correct channel.
This solution should correctly solve these cases:
closing drawer, clicking sidebar channel, should open the drawer on correct channel
visiting /chat then visiting / and clicking sidebar channel, should open full page chat on correct channel
This commits makes sure we correctly wait for the end of the transition to reopen the drawer on the correct channel/view. Also fixes a bug when previous URL was `/` and causing a double transition.
Also adds end to end system tests to ensure navigation scenarios are working correctly. This separation will make it easier to implement state in/out from chat.
